Expose the service as a Web service proxy using the sb Protocol

Similar Questions

• Web HTTP proxy using IO Non blocking

  Solved thank you...

  customer. Register (selector, SelectionKey.OP_READ
  | SelectionKey.OP_WRITE);

  OP_READ only at this stage. OP_WRITE is always 'ready' unless the socket buffer is full, so your selector will turn only. Do not save OP_WRITE until you have something to write.

  ByteBuffer bferClient = ByteBuffer.allocate (4096);

  You do this each time around the loop, and you don't even know if the key is still readable. Do it when you accept a connection, and then save it as the essential accessory for this channel.

  client.configureBlocking (false);

  It is already in non-blocking mode. Why you do it again?

  try {}
  If ((bytesRead = client.read (bferClient))! = - 1) {}

  bferClient.flip ();
  String msgFromClient = new String (bferClient.array ());

  new String (bferClient.array (), 0, bferClient.limit () - 1), but you're assuming that you've got a complete command here. You do not have. This is another reason why you need a ByteBuffer by channel.

  Channel.Connect (SocketAddress);

  You should do it in non-blocking mode, save the channel for OP_CONNECT and leave the select loop to take care to complete the connection.

  Channel.Write (bferClient);

  The incoming command is CONNECT. You do not write than upstream.

  If (!) » ». {Equals (msgFromClient.Trim ()))}
  int bytesReadServer;
  response from Byte [] = new ubyte [4096];
  try {}
  ByteBuffer bufferNIO = ByteBuffer.allocateDirect (1024);
  While ((channel.read (bufferNIO))! = - 1) {}
  bufferNIO.flip ();
  customer. Write (bufferNIO);
  bufferNIO.clear ();
  }

  And you don't do that here. Register the new channel for OP_CONNECT, then when you get finishConnect() and then save it to OP_READ, and moving forward in your select loop. You also need to associate the channel with the channel that read you the CONNECTION since. If you really need an object of attachment key for the original channel that contains the buffer of bytes and the channel upstream; Similarly, the channel upstream must a key attachment that contains sound buffer and its channel downstream. The effect of making all this stuff here rather than around the loop of selection is that you're never going back to the loop of the selection: you manage what a customer here in blocking mode, until the connection is dropped. Completely wrong.

  } catch (IOException e) {}

  Hang up. If bytesRead a-1, you must close the channel.

  e.printStackTrace ();

  And if you get an IOException here you must also close the channel.

  If (channel! = null) {}
  try {}
  Channel.Close ();

  This is a really strange place to close this channel.

  When you get this fixed upward, your zip code and I will tell you how to handle the OP_WRITE.

• How to change IP address of the web service proxy.

  Hello
  
  I created an AppModule and expose as a serviceInterface. I deployed this project in the server and then created the Web service proxy by giving the IP address of the server in WSDL.
  
  Now I have deployed the same application in different server and manually change the IP address of the proxy Web service methods. But he's still point to the previous server.
  
  I don't want to regenerate the web service proxy. Is it possible to manually change the IP address in the generated Web proxy service method? Or I have to regenerate their?
  
  Thank you
  Rohit

  chk
  Configure endpoint URL in WebService DataControl and Proxy

• Is it possible to use the Web ADF service proxy client in ADF mobile app

  Hello
  
  Recently, I started to develop mobile ADF applications on the device. Is it possible to use the client for proxy to service Web ADF with mobile application on the device? I read it in a document that, mobile ADF will not support "* WebService Java Proxy" * and supports only "* ADF webservice datacontrol * '"»
  
  If the customer service Web ADF proxy is not supported in mobile ADF, so how can I integrate ADF with EBS?
  
  REDA

  Where did you read that you can not use complex types with the Web Service data control? What version is that for.
  You should be able to use the Web Service data with complex types control.
  You can try and let us know if you encounter any specific problems?

• Cannot create the web service proxy in jdeveloper

  Hi all
  
  I'm unable to create a proxy web service by using the URL of the web service (https://domains.live.com/service/managedomain2.asmx?wsdl). I get an error saying "no WSDL not could be found. I am able to open the same URL in the browser. As the web service is secured by SSL, do I need to add anything on the jdeveloper to access this web service? Help, please
  
  
  Note: The web service must be called on https
  
  -MJ

  Hello

  The parameters are the proxy settings that are necessary for JDeveloper to connect to external sites - other than those available in the internal intranet.
  To connect to internet/external sites, you must have for this parameter. Here, as you try to connect to the external site - Windows live, you will need these settings.

  Thank you
  Nini

• Creation of SCOM Web Service Proxy OMCF

  I am referring to the Sub SCOM documentation to create an OMCF web service proxy.

  https://msdn.Microsoft.com/en-us/library/hh328977(d=printer).aspx

  When I execute a command:

  Svcutil /language:c# /config:app.config http://localhost:6272/ConnectorFramework?svc
  

     --> Replaced localhost with the actual IP address where my SCOM is installedI get below WS- MetaDataexchange error message. I made sure the data access service is up and running in windows services.Can anybody suggest what could be the issue here? Firewall or the port I am accessing is wrong or do I need to configure any service for this to work? Error: Cannot obtain Metadata from http://10.50.1.153:6272/ConnectorFramework?svc
  
  If this is a Windows (R) Communication Foundation service to which you have access, please check that you have enabled metadata publishing at the specified address.  For help enabling metadata publishing, please refer to the MSDN documentation at http://go.microsoft.com/fwlink/?LinkId=65455.
  
  WS-Metadata Exchange Error    URI: http://10.50.1.153:6272/ConnectorFramework?svc
  
      Metadata contains a reference that cannot be resolved: 'http://10.50.1.153:6272/ConnectorFramework?svc'.
  
      Could not connect to http://10.50.1.153:6272/ConnectorFramework?svc. TCP error code 10061: No connection could be made because the target machine actively refused it 10.50.1.153:6272.
  
      Unable to connect to the remote server
  
      No connection could be made because the target machine actively refused it 10.50.1.153:6272
  
  HTTP GET Error    URI: http://10.50.1.153:6272/ConnectorFramework?svc
  
      There was an error downloading 'http://10.50.1.153:6272/ConnectorFramework?svc'.
  
      Unable to connect to the remote server
  
      No connection could be made because the target machine actively refused it 10.50.1.153:6272
  
  If you would like more help, type "svcutil /?"
  
  C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Bin>
  

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Project Web Service Proxy shaded in App with all Technologies

  I created a new application "without model [all techniques]" in Jdev 10.1.3.5.0.4306. I want to create a web service proxy, but there are many choices in gray, including the web service proxy. The only selection available under the Business-> Web Services layer is the connection of the UDDI registry. Any ideas on what I should do?
  
  I just downloaded JDev 10.1.3.5 on Oracle and I get the same question.
  
  Thank you
  
  Published by: 878316 on April 2, 2012 18:03

  Hello

  On your project properties (double-click on the name of the project) going to scope of the technology, if you are 11.1.1.6.0 or features if you are 11.1.2.x, then select web services, click ok and now when you go again that all your Web services options must be activate.

  -Juan C.

• Add headers to a Web Service Proxy

  Hi all
  
  I am trying to use a web service via a web service proxy in a common library of java, as part of a validation method. I use JDev 11.1.1.5.
  
  The question that I have is that the web service requires two custom headers. I created a CustomSOAPProvider class that extends the internal ADF SOAP class provider to add extra headers, which works when I implement the WS as a data control. I recreated it as a web service proxy, but I'm not sure whether to refer to the current SOAP message and edit it with extra headers in a java class? I call the web service successfully, and I get a response "unauthorized".
  
  Any help would be appreciated!
  
  Thanks in advance,
  Aaron

  I got it...

  Card reqCtx =
  ((BindingProvider) iditInterface) .getRequestContext ();
  Card reqHttpHeader =
  ReqCtx.get (MessageContext.HTTP_REQUEST_HEADERS) (map);
  If (null == reqHttpHeader) {}
  reqHttpHeader = new Hashtable ();
  }
  The list header1 = new ArrayList();
  Header1.Add ("[Header1-value]");
  reqHttpHeader.put ("[header1name]" header1);

  Tete2 list = new ArrayList();
  Header2. Add("[header2-value]");
  reqHttpHeader.put ("[header2name]",-tete2).

  reqCtx.put (MessageContext.HTTP_REQUEST_HEADERS, reqHttpHeader);

  I used the code above to add HTTP headers, before calling the Web service interface.

• Flex Data Services integrated into Oracle Web Service Proxy

  I am trying to invoke a service proxy web created with Oracle JDeveloper IDE via Flex Data Services.
  I created an assembler class and defined actionscript objects that are required to serialize web service data and then call the dataservice with the id provided in the datamanagement.config file.
  
  When I try to debug the application, the class of the assembler is not affected, I added a breakpoint in the class, but on beforehand the exception is already thrown.
  
  Appears in the following stackTrace:
  [Flex] Order receipt: TCCommand [Cmd: 0, MethodName: null, TrxID: 3.0]
  [Flex] Has started the transaction using jndi name: java: comp / UserTransaction
  [Flex] Transaction committed
  [Flex] Response of the AMF financial/RTMP serialization
  Version: 3
  (Order method = _error (0) trxId = 3)
  (Print object #0 'flex.messaging.messages.ErrorMessage')
  rootCause = null
  destination = "dossierCreation".
  headers = (1 item)
  correlationId = "823B7A23-8463-0D24-0D39-A7FF8080B3A7."
  faultString = "there is an error unhandled on the server. javax/xml/rpc/ServiceFactory.
  messageId = "DF26CC97-B619-EAB1-191F-3FF02B998D49."
  faultCode = "Server.Processing".
  timeToLive = 0.0
  extendedData = null
  faultDetail = null
  clientId = "DF26CC00-580E-7285-F10F-720471C6BBE5".
  timestamp = 1.192524481046E12
  body = null
  

  I found the problem, I had to configure JOTM in my tomcat server to allow transactions.

• Web service proxy generation: Ant?

  We are currently working with the new "web service proxy' of jdeveloper.
  Since we have tons of services and do not want to manually, is it possible to make an Ant target to clean up the directory and regenerate their?
  
  Thank you.

  Hi JGeerts and Koen

  Perhaps this sample application can help:
  http://verveja.footsteps.be/~verveja/files/Oracle/AntWSAGenProxyApp-v0.01.zip

  It contains the resulting code of popup "generate Web Service Proxy..." menu option "on the WeatherWS.wsdl, using JDeveloper 10.1.3.4.0.

  It has a file build.xml with a 'clean .generated-proxy-code' and a target of "wsa.genProxy.WeatherWS".
  The WeatherWSTestTool class in the sample application works with both, JDeveloper and Ant, generated proxies.

  Here is the content of the build.xml file:

  success
  Jan Vervecken

• Access to an external client Web service proxy

  How access a Web service proxy? It is identical to a client accesses a web service?

  I don't know exactly what you mean by "Web proxy service", but I think that the answer is 'yes', a piece of code running on a server application can access a webservice in acting as a Web service client (get a draft for the service and that invokes it).

  (If this isn't answering your question, you can ask in the forum of webservice weblogic)

• BlackBerry, call web services via the SSL protocol

  Hi guys,.

  We are developing an application BlackBerry to OS 4.1 and we test it on the 8330.  This application calls several web services on a remote server via the SSL Protocol (side).  There is a valid certificate from Entrust installed on the remote server - it works properly with all major desktop browsers.  The certificate has not been installed on the BES - is it necessary?  Some BlackBerry devices will be linked to a company BES, others not.

  When the application calls the web service, a window opens with the following message: "you try to open a secure connection, but the server certificate is not approved."  Continue to push works fine, but the window opens again a few moments later.  Pushing view certificate indicates that the certificate is considered invalid ('unverifiable Cert chain').  The same information is given when you navigate to the certificates of the aircraft.  Certificate trust pushing watch a 2nd window asking you the key Store password, which we are not aware of.

  You guys can help us with this?

  Thank you!

  We have solved the problem.  It seems that the BlackBerry device is having a hard time with a certificate signed by the Entrust 2048 bit root certificate.  Give us a new intermediate certificate signed by their 1024-bit root certificate, which we have installed on our Apache server.  While the window 'certificate is not approved' arises at once, pushing "Continue" worked and it never came up again.  To do this, it will probably install the certificate on the BES, something we don't have yet.

  Thank you for taking the time to answer!

• Unable to expose the ERP objects like services

  Hello

  In fact, we have created an object in ERP and could not able to expose the object created as a service of s.

  Can someone please help with that?

  Thanks in advance,

  Nitesh Kumar

  What ERP application you're talking about? which adapter is used?

  We will not be able to respond with very little information

  Ravi

• Identify the time spent on each step of the Service Proxy?

  Hello world
  
  Is anyway to determine how long it takes each step of the proxy service?
  
  I use OSB 10.3.1
  
  Thanks and greetings
  Himanshu

  Yes it is.
  Open Sbconsole.
  Go to the operations on your proxy service tab, select control, activate it by checking the box.
  Then in the alerts section, you will see a with three values - service level, Pipeline level, level of intervention (or perhaps activity level, have forgotten). Select the level of Action.
  Run your service proxy to the desired length.
  In the sbconsole dashboard, you should be able to see the parameters of each action within the proxy service. It is probably in the last tab of page within the OSB monitoring dashboard.

  I hope this helps.

• Problem with creating Web Service Client using Oracle JDeveloper

  Hi all
  
  I am trying to create a Web Service Client using Oracle JDeveloper. The property of the compiler of the project I updated JRE 1.4
  
  When I run the web service client, he gives me a lot of errors saying:
  ' Error (32.2): annotations are not supported in - source 1.4'
  
  I wonder why JDeveloper uses annotations even after that I set the compiler property to 1.4
  
  I'm following this link to create the Web service client:
  http://www.Oracle.com/technetwork/developer-tools/forms/WebServices-forms-11g-094111.html
  
  Any help in this regard would be greatly appreciated.
  
  Thank you
  Scott.

  Scott, when you run the proxy Web service in JDeveloper, you will see a bunch of jars listed in the classpath in the Journal JDeveloper window.
  All of these classes must be in the classpath of your server when the class is deployed there.
  Note that by default, I don't think they are going to be included in the JAR that you build for the proxy when you deploy.