EXPRESS the PARAMETERS on the screen

Similar Questions

• Call the base-dos .exe file, but how the input parameters and get the text on the screen of the BACK?

  Yes, I tried the similar topic before posting about this.

  I understand that we can use standard input of entrance of parameters of the System exec.vi, but still can not find an answer on "how to get the text on the screen of the BACK.

  1 seal of sw500912_2701test.exe is the exe of Basic-back , (change to rar .tar)

  2. double-click on the .exe, run this file. The first parameter is the rate band, the default value is 9600.

  

  3. setting the COM #.

  3.

  Can be useful to check that the command is actually being run. When the dos window opens is there any text?

  Try cmd /c "."

• Outlook express 6. does not full screen load. header bar 20 mm less than full screen. not scroll down bar on the screen

  My outlook express 6 program does not load the screen prperly. The header bar is less about 15-20 mm and the bottom scroll bar is not visible

  You are the very welcome. Glad it worked for you.

• Why all the emails Outlook express opens at the far right of the screen?

  Why all the emails Outlook express opens at the far right of the screen? I have to take the cursor to the top right of the computer screen, then click to maximize the file so that it opens to the normal size and location. Does not try to 'change' the file to the normal position. Thank you

  Any window that you want to resize all the time must be the last closed window.

  Take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window the next time that you open the program.

• Re: How to set the parameters of the screen?

  This computer screen is too bright. The manual is all in Chinese, which is not so useful for me. If anyone knows, please let me know.
  Thank you

  First of all, it would be interesting to know what model of laptop you have.

  Second, if you use the OS preinstalled Toshiba then the FN keys should work and so you can try the FN + F6 to decrease and FN + F7 to increase the brightness of the screen

• Is satellite U400 - 17 H - possible to change some parameters of the screen?

  I bought my Satellite U400 - 17 H in Paris in spring 2009 with the hope to work on my laptop without eye discomfort. My laptop TOSHIBA Satellite A100 husband s has a very comforting display and I was hoping to find the same screen for the Advanced series of Satellite U400 - 17H. Unfortunately for me, my sore eyes as soon as they fill the screen.

  What should I do? Is there a setting in Notepad to change? Regarding the brightness, I put the lowest level.
  Can I trust filters of privacy (anti-spyware screen for the privacy of travellers) as filters for the radiation of the screen that hurts my eyes? http://www.toshibadirect.com/TD/B2C/Adet.to?poid=435292 they are described as protecting only the laptop s screen not the eyes of the user s.

  Thank you!
  Elena

  Hey Lionel,.

  I put t really know what problems you have with Satellite U400 but friend of mine has it and in my opinion the screen is as good as other portable also. I put t see any problems with the quality of the screen, everything is really good.

  It is important that you use the native screen resolution and 60 Hz. This will give you the best image quality.

  About these privacy filters I've never used them but I doubt that will improve the quality

• Question about the parameters of the screen double

  Hello

  I have some problems with my new TV that I want to connect to my laptop. I have a Toshiba Satellite L300D with Windows Vista.
  The problem I have is for the installation of the settings of the TV screen. I want to share the desktop between both screens, and I do the installation as usual with the settings of the screen of the control panel and save my settings. It works fine, but when I change the view between the screens with "FN + F5", all my settings are gone; It is however it was before.

  So my question is, how can I keep my settings for the next time, or, how can I change the "FN + F5' - settings?

  Thank you for a quick and understandable response

  Q:

  Hello

  Until we start the discussion please can you me what settings to record exactly?
  In my opinion, it is not necessary to record anything, when the FN + F5 key combination offers several different settings that you can use.

  By the way: how you have connected your laptop to the TV? Using the S - video cable?

• Outlook express 6, when I open an email it opens up far to the right of the screen, the page is barely visible

  When I click on an email to open it completely, it opens but moves all the way to the right of the screen, I can barely see a far bit of the page.

  The only way I can use, I have found is to right click on the little blue band on the top and select "expand", which restores the page entirely opn, fron and Center.  I can't find a way to have the page opens correctly.  I can't catch it and re - position, I can't find a setting to change in 'Options '.

  The same thing happens when I try to "reply" to an e-mail.

  I'm looking forward to helping with this!

  Thank you in advance!  :)

  Suzanne

  If you are not able to grasp the window, try the following.

  Right-click on the tab of the window in the task bar and select move. Now, use the arrow keys to get to the screen. Close all other windows except this one and use the cursor to drag the message to the desired size. Close it and Windows will remember the size and location when you open it again.

• parameters of the screen

  Due to problems with his eyesight, my mother put his text settings so great that they cut the wallpapers that I need to make changes to some other settings, including the dpi of the screen. Is there a work around for this one?

  Due to problems with his eyesight, my mother put his text settings so great that they cut the wallpapers that I need to make changes to some other settings, including the dpi of the screen. Is there a work around for this one?

  Use a 40 TV + as your monitor then things are bigger through the lowest resolution, that you can't stand naturally.  (I kid you not - I did it for my grandmother.)

• Firefox didn't stop when I close, and it stays running but doesn't charge on the screen when asked. It says Firefox is running and will not let me recharge. I end up close with the Task Manager. Suggestions?

  See the above phrases. Firefox continues to run, but the screen cleared of Firefox and I can't restart from the icons.

  Hello

  Please see this. Please note that the precise way of closing of Firefox's file (Alt + F) > exit and would usually take a few seconds depending on the history of the parameters of compensation to Tools (Alt + T) > Options > Privacy > settings next to clear history of Firefox closing. If there is delay in a plugin, you can also try to complete the process the process plugincontainer and check if Firefox closes on its own.

• HP 10 G2: Eve of the screen is not together

  My Android Tablet keeps back sleep after 15 seconds on inactivity. Will define no higher.

  Hi there @rfdguy1949,

  Welcome to the Forums of HP Support!  I understand that your tablet is not either remember or know the parameters of your sleep.  I'm happy to give you a helping hand with this.

  You can check under settings > display > sleep and see if there is the possibility to 'never '.

  If this option is not available, you can try settings > Developer options > stay awake. This will keep your Tablet awake while it loads. This could be useful if your Tablet does not support the screen timeout '' never. ''

  Note: If you don't see Developer options in settings, it may be made available by going to settings > topic > Build number. Developer options must appear after typing the number of version several times.

  Please let me know if some of these work for you and if it doesn't solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• I use 'best home Ever' and itwent too large for the screen and my firefox too bar isn't there?

  I use a Best Ever home page to my home page and my son was using the computer while I wasn't there and it changed somethings. The 'homepage' is giant size now and I don't know how do it as if it was. Also the toolbar file, bookmarks, etc. is gone.
  I'm not the best to try to figure out what to do with the computer!
  I have no idea how some of the 'installed plugins' (belo) got there?

  Try to press and hold CTRL on the keyboard and press 0
  the control key is on the left background (& right)
  0 is the digit zero

  Using Ctrl + 0 to reset the zoom, it is fixed for each site, note.

  • See the font size and zoom - increase the size of web pages

  To get your toolbar back, try pressing the Alt Key keyboard (it's probably next to the space bar) and may temporarily cause the menu bar to display, pressing V then T should give you options to set the toolbars you want to display for example, the bookmarks toolbar. Note your sone may well make use of the firefox button, which also provide similar access to features

  • See the menu on the Firefox button instead of the toolbar from the view menu <-clickable links (blue)

  Be in full-screen mode, which also causes the menu bars disappear, display, try pressing the F11 key on the keyboard (wait a few seconds as the screen to redraw) should switch you to the full screen in.

  One thing you can in view of the future is implemented on your Vista operating system separate accounts for your self and your son, so that way everyone can to some extent make changes the way they like without unduly harming the other.

  When Setup like that each user has their own profiles for firefox and once again the changes can be made separately.

  There could be other reasons for your problems, but I assume that your son has just forgotten to redefine the parameters on those that you had used.

• Satellite U200 - questions on the screen refresh rate

  Satellite U200-148 WINXPHOMESP2
  Card video Mobile Intel (R) Express Chipset Family 945GM
  Amount of video memory 128
  Accelerated Graphics Port - it's inaccessible
  The screen 60 hertz frequency
  Questions
  (1) accelerated Graphics Port - it is enabled if so that it is necessary to make it became accessible.
  (2) the question whether with 60 hertz frequency can be increased up to 75.

  Hello

  I noticed that on some computers laptops Toshiba, the screen refresh rate is fixed on 60 Hz.
  The screen refresh rate is not important on laptop screens.
  Matrix TFT is not such a thing as the refresh rate. It is not blinking.
  TFT as all other LCD screens do not refresh rate setting, only the reaction time.
  Your eyes are sure ;)

  PS: as much as I know AGP port is not available.

• HP 15 ba-015na with Windows 10: Customizing the screen saver

  Hi, I would like to customize the screensaver of my brand new HP 15 ba-015na that came with Windows 10.

  Problem is when I go to the screen saver settings all I have is the screen savers (no more six screensavers of Win10) and the selection button is not highlighted. I tried the mwnu of customization, but there is nothing that I see that would help. OD did I miss something?

  Screen saver of my laptop Toshiba Satellite old made default to the photos on the laptop and they arose at random, which is what I would have on my new HP.

  Grateful for any help. TIA.

  Hello

  You can do the following.

  Right-click on an empty area of the desktop and select Personalize.

  In the next window, select the screen lock in the left pane, then scroll and select the screen saver settings.

  In the next window, select Photos in the menu drop-down, then click on apply to save the change.

  If you want to change the location of the images are selected, click on the button to the right of the drop down - menu parameters here, you can also select the slideshow speed or activate random playback.

  Kind regards

  DP - K

• How are checks on the screen?

  Hello

  I want to add on the screen controls to custom FCP generators and effects. How are controls in movement on the screen?

  Thank you

  Ivan

  Basically, you need to use those already provided in motion (unless you can program the FxPlug plugins).

  You'll find commands to the screen in several filters. The most common is Poke (in the set of filters of distortion.) However, * any * filter CSOS have to publish in its parameter list can be used and there are several different types. ('Exotic' favourites are blur > blur Gradient, tile > Kaleidotile and aesthetic > extrusion.)

  Create a new top-level group - rename CSO (or CSO if you have more than one). In the Group Inspector (you * must *) set a fixed resolution 2D. (Otherwise will be very unexpected effects.)

  The group selected, add filters > distortion > Poke.

  In the Inspector of Poke, find and check CSOS to publish.

  Note: the group still has a length of 0 images. You can in properties > calendar > and set the time to the length of your project (or more) or more simply, just add a shape: rectangle, circle, what is practical and then put it in the wide (or turn off the group so it does not appear). The group will have its length defined for the duration of the project (if your preferences > project > create a new layer at the beginning of the project is on or your playhead is 0.) Onscreen controls appear only in FCPX to the number of frames including the object/group parent in the timeline panel. Simply adding a filter does not add an object and filters have no length if there is nothing to act accordingly.

  Add behaviors to link to the X and the parameters Y of your object under control. (You need add separate links to individual settings, because there is a mismatch of types of settings.)

  In Wells of the behaviour Source object, add the group to the OSC. For the Source parameter in the compatible settings drop-down list, select Filters.Poke.Center.X and Y respectively.  Your object will move to the upper right corner of the canvas. At the bottom of each link behavior Inspector, there is an Offset value. Define each of these to-0.5 (which resets the object in the middle of the canvas.)

  Your object will now be controllable in FCPX with the control on the screen.

  You know how application relates to several destinations resolution and how it applies to what you were doing just a little.

  Motion (very skillfully I must add) treated all resolutions screens as having the coordinates of 0 and 1 (inclusive). No matter what draft resolution you have, SD, HD, 4 K, etc... Controls of the OSC are considered as having the same dimensions. Real pixel values are calculated from the screen resolutions for horizontal and vertical to the destination video (project) dimensions. [Fixed resolution dimensions help you determine the proportions in FCPX, but according to me, are automatically set to adapt to the target FCPX project when it is applied.] Maybe it's not always true, and if you make adjustments, then you essentially override this behavior in your specific model project. See below.]

  In the middle of the canvas to an object, as a form, etc., is (0,0), but for a CSO is 0.5, 0.5. When you create a relationship between an object and the parameters on-screen control center, you're "setting" the Center in a different coordinate system. Compensation for these values to the negative terminal of the Center value resets the position to the original 'normal '.

  Whatever he says, you can actually fool onscreen controls by setting a custom 'resolution' of the group you places in the dimensions of fixed resolution (say: 300x500pixels). So if you want to create something like a "HUD" to appear in FCPX and have the only control flow within its limits and control another object on the screen, which can be done (using the behaviors of clamp to restrict the Center.X and the Center.Y to between 0 and 1 and the OSC will remain within the limits of the resolution group fixed dimensions you set).  If you don't 'get' this still, forget about it then for now, it is not so important and has nothing to do with what you were asking. [In the case of a "HUD" type configuration, you can create another group with other CSO to control the placement of objects on the screen HUD Group, and everything in this group would be sent as CSOS, including the CSOS of the object of HUD designed... get some practice with CSO, then venture into complicated. You are only limited by what you can put together with what you have available in motion if you do not program such things at the level of the application/plugin. [Here is an example of this type of control project - it's very simple and used to define the background color: https://www.youtube.com/watch?v=jpIxuuZuko8 - it has been designed to be taken apart and studied.]

  If you build a model with CSO and the OSC does not appear in FCPX: return in movement and check that his group has length (Timing) and make sure that you have checked the box publish CSOS (and that the effect is selected in the Inspector of FCPX - click the title bar of effect).

  On the resolution fixed. Motion, by default, the account of dynamic groups - they grow and to shrink to just be the bounding box of all that they contain. By setting the fixed resolution, you force Motion to limit the group size to what you have defined. When control of the center of CSOS goes beyond the limits of a dynamic group, it acts as a multiplier of positional - and your purpose (most of the time immediately) disappears very quickly off the screen. If your initial group of the OSC has no physical object in it, it's dynamic ratings are 0 x 0 and * any * movement of the control on the screen increases by whole numbers for each pixel, it moves. If you move the OSC 1/2 pixel in any direction, the object's Center is already aligned with the edge of the canvas.

  If you have any questions, do not hesitate to ask. This topic may be a little hard to grasp until you actually out by yourself and see it in action.