Extension drive C: on a Windows XP VM

Similar Questions

• What type of driver sound has extension wav. Which audio driver should I download Windows 8 and how?

  What type of driver sound has extension wav? Which audio driver should I download Windows 8 and how?

  Sannia Hello,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  1. do you try to play audio files. WAV extension?
  2. If so, what happens when you play the files? They do not play, or you receive an error message or a code?
  3. What is the brand and model of your tab Windows 8?

  Thank you for details on the issue.

  File (WAV) Audio Waveform format is a Microsoft and IBM audio file format standard for storing an audio bitstream on PCs. It is an application of the Resource Interchange File Format (RIFF) binary stream format method for storing data in "chunks", and thus is also close to the 8SVX and used the format AIFF on Amiga and Macintosh computers, respectively. It is the main format used on Windows for audio usually compressed gross systems and not compressed. The usual bitstream encoding is the format for linear pulse code modulation (LPCM).

  Audio driver is common for all types of audio files. However, in order to play an audio file with a specific extension, you may need a special codec that you can install. You can refer to this article:
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-8

  Additional information:
  Download and install the drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  I hope this information helps.

  Simply answer the required information and let us know if you need more help.

  Thank you

• So basically I can't extend my 3 TB hard drive 3 TB because windows 8 is the treatment as a MBR. Error [0 x 80042468]

  So basically I can't extend my 3 TB hard drive 3 TB because windows 8 is the treatment as a MBR. Error [0 x 80042468]

  Background: after a bit of trouble to install windows 8 on my SSD, I had at one time install on my drive 3 TB of seagate for troubleshooting. Of course, this has reduced the reader to 2 TB for the MBR. I finally solved the problem by changing the mode AHCI instead of IDE interface and installed the OS on my SSD. To my dismay, I could not reclaim the unallocated space.

  I tried to format the drive and delete volumes using disk management, windows 8 installation disc command prompt (you have the option to format and remove the disks and volumes). Basically, I'm stuck. I can't extend the volume. Windows 8 install disc gives me the error [0 x 80042468]

  There is a similar problem but I can't access the answer. (ACCESS DENIED)

  * edit * there is no system of operating on the 3 TB drive, it is completely on the SSD.

  Hello

  Thanks for posting your question on Microsoft Community!

  After your description, it seems that you have a problem with the extension of 3 TB hard drive.

  I would like the season go the following information.

  I suggest you to see the steps in the link.
  http://support.Microsoft.com/kb/2604034

  You can also refer to:

  http://msdn.Microsoft.com/en-us/Windows/hardware/gg463525.aspx

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 2581408

  I hope this helps. Please let us know if you need assistance, we will be happy to help you!

• Where can I find display driver for satellite A200 Windows XP 32-bit PCAECE

  Where can I find display driver for satellite A200 Windows XP 32-bit PCAECE? Help!

  Hello

  Most of the A200 series made use of this video card chipset.

  [Intel (r) Graphics Media Accelerator Drive X 3100 | http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1670 732xml & sliceId = & dialogid = 57594450 & stateId = 1% 200% 20 57598302]

  Hope this will help :)

• Can I update driver for c4585 for windows 7 to allow wireless printing?

  My photosmart c4585 does not work with windows 7, I can get the driver to work with windows 7?

  Here's the full features of Windows 7 software and the driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-74912-1&cc=us&DLC=en&LC=en&OS=4063&product=3757825&sw_lang=

  Install the software and the configuration of your PC to a wireless printer connection. 802 11 B and G wireless protocols are supported by your printer wireless.

• Driver HP 15-r018dx windows 7 64-bit wireless

  Hi, I have a HP 15-r018dx and I need a driver for wireless network windows 7 64 bit. Guys do you know where I can download one?

  This thread should help:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/how-to-get-Windows-7-installed-on-HP-Pavilion-15-15-E028US/TD-p/2939547

• Home Media Network Hard Drive, Cloud Edition on windows 8

  Hello, I would like to know how to use disk hard mid with a computer running windows 8, instalation CD software doesn t work

  Hello, configure your Media Network Hard Drive Cloud home edition Windows 8 (.1) is quite easy.

  You can consider installing the update 8.1 for Windows first...

  But nonetheless go to the Lenovo Web site and download the latest version of the LenovoEMC Storage Manager.

  1.4.4.14439 worm.

  It works somewhat like the Iomega software former.

  (Assuming that your device has the latest firmware installed and everything is set up properly it should work fine.)

• How to install a hard drive more on a Windows Server machine?

  Disable windows server and install the new hard drive

  I installed windows on a hard drive server but now I want to turn off and install on a new larger hard drive. How can I go about it?

  Hello

   
  There are a few options that you can try:
   
   
  1. format the hard drive.
   
  2. replace a new operating system. When media starts, you are presented with the option to format the drive before installation.
   
  3. If it is a separate partition, and you're dual-boot, you may need to set your boot options after formatting your partition WS2008. Demarrer start on your older operating system drive, and then select the boot option fix for your existing partition from the operating system.
   
  Note: If both the HARD drive is connected to the same machine, start from the media format of the previous installation on the old HDD and install the operating system on the new HARD drive.

   
   
   
  See also:
  http://download.Microsoft.com/download/e/6/3/e63cf2f6-7f71-450b-8e4a-dace88e99456/Readme.htm
  http://TechNet.Microsoft.com/en-us/library/cc736912 (WS.10) .aspx
   
   

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• driver HP 6520 for windows 2000

  I want to know also how to install HP 6520 so it can be used by windows 2000 operating system that is connected to a DSL modem. The printer is already connected and used by an operating system XP on the same DSL modem.

  I understand they had not devised a driver to use on Windows 2000, but somewhere, I had met some info that there was a driver who could work and thought you might know. I can't find. Can I just send my printing needs to a shared folder from another OS that can use the printer for me. Sometimes, as a consumer, I feel like a captive audience who is at the mercy.

• where to download the samsung usb driver to use with windows xp service pack

  Please tell where I can download samsung usb driver for use with windows xp service pack 2 for duos samsung galaxi s 2

  http://www.Samsung.com/us/support/downloads

  Samsung download center, follow the instructions on the page.

• Aspire driver V3 - 772 G Windows 8.1 USB 3.0 problem

  Hi all

  I bought my V3 - 772G 1 months ago about.

  Yesterday everything worked well and today, I noticed that none of the 4 USB ports were working (laptop was suspended since yesterday)

  No USB not connected, nothing. Key/mouse USB/hard drives /... does not work.

  I noticed that in Device Manager, I had problems with the ' USB 3.0 eXtensible Host Controller Driver "that the driver was not loaded. I've seen people online saying to uninstall and restart the computer. That and once again no operation USB, Device Manager, the device with problems was now "Compliant Host Controller xHCI USB".

  I tried WITHOUT success to the following:

  -Downloaded ' USB 3.0 eXtensible Host Controller Driver "Intel has failed (available only for W7) - Web site

  -Restart windows full - same

  -Disconnecting the battery and power for a few minutes, restarted - even

  -Remove all USB devices (hubs and so forth), restarted - even

  -Uninstalled all updates of 2 days before (to the point that I know that it worked) - pilot months before change - same result dates

  -Tried to search the BIOS to disable USB3.0 and put 2.0 - not found

  -Tried to get back to another restore - point na not work, complained that the disc is maybe damaged

  -Widnows run chkdsk/r several times - no error found - nothing resolved

  -Run chkdsk/r - stuck at 16%, but I guess that needs all night (TODO) - solved anything

  -Tried to do a repair without losing files (using recovery partitions) - always guess how

  Any idea or any help? They just stop working. I plug laptop already with windows 8.1 and they worked for 1 month

  Thank you

  -UPDATE1-

  I used the command-line (via recovery windows at startup) and copied all the files from backup drive (I assume) X:\Windows\System32\Drivers\usb* on the local drive C:\Windows\System32\Drivers

  Rebooted - still nothing

  [Solved]

  Here's what you can try:

  (1) ensure that the ntbtlog.txt file located in C:\Windows it is removed (to clean the logs)

  (2) to activate the startup log check which driver loading fails:

  Option A:

  (1) open administrator command prompt

  (2) write "bcdedit/set {default} bootmenupolicy legacy" to allow the start of legacy with F8 (don't forget to change the settings after this guide)

  (3) reboot and press F8

  (4) select this option to start with active log

  Option B:

  1) press "WIN + R" and write "msconfig".

  (2) in the Startup tab, select the option "Startup journal."

  (3) to apply the changes and reboot (remember to change the settings after this guide)

  (3) check the drivers failed in the log (C:\Windows\ntbtlog.txt) file (in my case I got "ucx01000.sys" driver failure)

  (4) after researching online (Source) I saw the USB3.0 stack consists of 3 files of accommodation with the xHCI Host Controller: Usbhub3.sys, Ucx01000.sys and Usbxhci.sys.

  (5) restart the laptop and press 'ALT + F10' to enter in the menu ACER recovery

  (6) select "Troubleshooting", then "Advanced Options", then "Command Prompt"

  (7) you will be located in the "X:" drive and the folder "system32" of the recovery unit

  (8) write "cd drivers.

  (9) "copy write Usbhub3.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer "Yes")

  (10) "copy write Ucx01000.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer "Yes")

  (11) writing "copy Usbxhci.sys C:\Windows\System32\Drivers\" (if you are asked to overwrite, answer 'Yes')

  (12) write 'exit '.

  (13) restart your laptop, and you should be able to use USB again

  (14) disable the startup option if you used Option B.

  In my case, the "Ucx01000.sys" file was missing in the drivers folder.

• I re-formatted my c: drive then re installed windows XP now I'm locked up.

  I re-formatted my c: drive then re-installed windows XP. Now windows will ask a password that I don't have. How can I bypass this password or just reformat my drive c: again.   I have to assume that I put a password somewhere, but no password I would have used work wil.

  Hello

  ·         Did you enter the password during the installation of Windows XP?

  Every time that Windows XP is installed on a system, it creates a default account called "Administrator" and by default, this account is not protected by Word. Then try to connect using the empty password in safe mode and check.

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• Error: «Please insert a blank disc into the CD drive (E :).» Once Windows Media Player detects a new disc, it will start automatically burning"

  Hi, we are currently running Windows XP SP3.  My daughter tries to download a song from Windows Media Player, she needs for her class dance.  It just download the song bad by accident without problem.  Now she's trying to download the song using the same CD (CD - R80) and it gives sound this error: «Please insert a blank disc in the CD drive (E :).» Once Windows Media Player detects a new disc, it will start automatically burning."  Someone please help.  She needs this to practice his senior dance solo.

  As I understand it, the CD was already burned once, and now she's trying to burn on the same CD again? This is not possible, as the CD - Rs can only be burned once. She will need a new blank CD - R, like the error message.

• Cannot install windows XP it said hard drives are not connected & windows can not find the hard drives

  I got an asus computer notebook windows vista, upgrade from vista to windows 7, now I'm not able to do a clean install of windows xp, when I try to install XP, it says that hard drives are not connected & windows cannot find not the hard drives, so once again installed windows 7, is there a way to overcome this problem Why do I get the message windows xp does not detect hard drives? I even formatted the hard drive & tried to install Xp, but still, I get the same message.

  The answers will be appreciated...

  Thank you

  Because the Windows XP installation CD does not have the necessary disk controller drivers.  You will need a floppy drive to provide the drivers of controller for the installation program, or you will need to burn a CD of Windows XP with the controller drivers slipstreamed into the installation.  A CD of Windows XP with SP2 included may have the necessary drivers.

  John