External authentication via the PHP script failed

Similar Questions

• Bad resolution of Qosmio G30 - external display via the HDMI connection-

  Hello! This problem makes me crazy, please help if you can...

  I just bought a G30-102 and I am trying to use it with an external display via the HDMI connection. The problem I have is that the native resolution of 1920 x 1200 cut the edges of the screen and the quality looks terrible - its almost as if the entire screen is enlarged. I tried with a BenQ FP241wz initially (1080i is 1920 x 1200) and the Toshiba helpline could not find a solution either - even after painfully reinstall all the drivers, etc..

  Its been going on for so long, I thought I'd try it out with my HDTV instead, just to be sure it wasn't a monitor problem. So I tried with my Toshiba 32WLT66 - and come to find that it has exactly the same problem.

  All the display settings appear to be correct and the G30 is convinced that the result is correct, so I have now it is - don't you think not that this is a problem with my HDMI port?

  Please help, I'm a designer, and it is essential that I use the machine on a large screen. If it is a hardware of the G30 problem, I need to talk to Toshiba immediately replace or fixing.

  Hello

  I tested the Qosmio G30 (HD-DVD) with my LCD TV using a HDMI cable. Everything worked perfectly. As a first step, I put 1080i value in the settings of the BIOS and after following the instructions in the HDDVDGuide document under http://support.toshiba-tro.de/kb0/TSB6A01LH000LR01.htm

• How to enable and disable, copy or rename the rules via the groovy script?

  A client, we received this question:

  How to enable and disable, copy or rename the rules via the groovy script?

  Foglight 5.7.5

  Hello

  There is this example of support KB

  support.Software.Dell.com/.../99059

  and there is also documentation of Service layer of the administration on the RuleService console.

  Best regards

  Golan

• Cisco ISE 1.1.2.145 Admin authentication via the LDAP protocol

  I have configured the LDAP protocol and able to retrieve our LDAP directory structure. Now, I'm trying to point authentication "Admin Access" Source 'External identity', which is the new LDAP IS I created. But I couldn't find an option to authenticate locally if for some reason the LDAP configuration does not work. I learned that the ISE can automatically return to local auth as external sources Idenitity are inaccessible. How can I test the LDAP authentication with breaking them our Admin Access? I thought to open two parallel sessions, one with Super Admin account Local and one with the domain account. But I noticed that ISE communication is smart enough for the closing session/connection no matter what other sessions in different browsers so, basically, I can't open two parallel sessions the same machine to test. Suggestions? or am I missing something here?

  Thanks in advance.

  Hi Srinivas,

  Even if you configure LDAP as a source of external identity of admin access, you can always internal relief without having locked. According to the ISE user guide:

  During the operation, Cisco ISE is designed to "fall back" and try to perform the internal identity database authentication, if the communication with the external identity store has not been established, or if it fails. In addition, whenever an administrator for which you have configured external authentication launches a browser and initiates a logon session, the administrator must still the option authentication of demand through the local Cisco ISE database by choosing 'Internal' to the Selector drop-down storage of identity in the Connect dialog box.

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/user_guide/ise_man_identities.html#wp1351543

  Please see the attached screenshot by my lab ISE:

  

  I configured the admin authentication against AD, but I still see both 'Internal' and 'AD' at the time of the connection.

  I hope this helps.

  Thank you

  Aastha

• Sending data to the PHP Script

  I am writing an application that needs to send a GET request with parameters (ie: http://blah.com/GET?name=bob) to a PHP script that interacts with a MySQL database on a server.

  Anyone know where I can find a good tutorial on this or point me to another thread?

  You can use URLEncodedPostData (check the documentation for the API).

  You should do something like this:

  
  URLEncodedPostData postData = new URLEncodedPostData(URLEncodedPostData.DEFAULT_CHARSET, true);
  
  postdata.append("www.myurl.com/foobar?");
  postdata.append("name",m_nameParam);
  postData.append("id",Integer.toString(m_locationId));
  postData.append("text",m_checkinText);
  
  return postData.toString();
  

• The number of devices (MAB) can be authenticated via the internal identity stores ACS 5.3? ACS 1120 (802.1 x))

  Hello

  I m currently looking for a document that specify the number of MAC addresses can be stored and authenticated via a GBA (1120)? I prefer to use the identity store internal AD or LDAP for authentication of the MAB for 802.1 X project.

  I would like to know what impact the GBA? CPU/MEM?

  What is the impact on the user authentication? delay, delay, etc.

  Please specify any other restrictions or side effect.

  Thanks for your comments

  Concerning

  Torsten Hello,

  I have confirmed on our database as well as this community and the answer is the same

  Refer to:

  https://supportforums.Cisco.com/thread/2101657

  Added additional information:

  Internal Users : 300000 Internal Hosts : 50000

  Best regards.

• Call via the FDM script batch file

  Hi all

  Here is the FDM script written to call the command via the Script FDM in import file, test the operation of the script by creating a vbscript file (* .vbs) to call the batch file and worked like charm. Please see the excerpt from the sciprt

  SubMonth = "Mar".

  SubYear = "FY15.

  ARG = trim (SubYear) & "" & trim (SubMonth)

  Set objWshShell = CreateObject ("Wscript.Shell")

  strCmd = "E:\hyperionfiles\batch\CalcActNew.bat" & Arg

  Line 53 objWshShell.Run 'strCmd', 0, True

  The error returned is

  

  Thank you

  Hi, no double quotes are needed to join strCmd it's a variable

  objWshShell.Run strCmd, 0, True

• BASH command via the console script

  All,

  I had to run a a series of BASH commands via the Script Console to a subset of servers. Is there a script for this that I can take a look? Or direct me to the controls, I might need.

  You need to encapsulate in a script on the remote host to do.

  actSvc = server["ActionService"]params = [:]params.put("COMMAND_LINE","/home/foglight/testBashScript.sh")params.put("HostName","centosvm1")actSvc.invoke("RemoteCommandAction",params)
  

  This will run the script shell on the host remote centosvm1

  the bash script contains the statement echo inside.

  -rwxr-xr-x 1 foglight dba

  99 Jan 17, 12:09 testBashScript.sh

  [foglight@centosvm1 ~] $ testBashScript.sh more

  #! / bin/bash

  echo 'Test Action of Bash Script remote command execution' > /tmp/ForumOutput.txt

  [foglight@centosvm1 ~] $

  -rw - r - 1 foglight dba

  56 Jan 17, 12:12 ForumOutput.txt

  [foglight@centosvm1 ~] $ /tmp/ForumOutput.txt more

  Run the test of the Action of the remote Script Bash command

  [foglight@centosvm1 ~] $

  I have tried a few iterations to try to echo the commands directly in a command param file but did not

  Hope this helps

• Deployment of the OMB via the TCL script

  I need to deploy all of the mappings in a module in a new target database. I want the configuration settings for
  (1) default operating mode = "DΘfinir base" and for
  (2) default audit level = 'NONE '.
  on all maps.
  
  It seems that the default repository for these parameters (and I can't find where these default values can be managed) are
  (1) default operating mode = "Line in function from set failover" and
  (2) level of auditing by default = "ERROR DETAILS" on all the mappings.
  While when I deploy via the script all mappings have these settings (which we do not want) as it appears that OMB orders use these repository/user settings. Card via interface OWB deployment allows you to change the settings of configuration as requires it, but it's the long answer.
  
  These configuration settings can be overridden in the TCL script via OMBDEPLOY or OMBALTER or any other command OMB parameter so all mappings are deployed/configured as
  (1) default operating mode = "DΘfinir base" and for
  (2) level of auditing by default = 'NONE' on all the mappings.
  
  Thank you
  Dave.

  Hi Dave

  Yes, you can set the code generation and the non-use of the properties of mode from a script...
  OMBALTER MAPPING "$map" DEFINED the VALUES of PROPERTIES (GENERATION_MODE, DEFAULT_OPERATING_MODE) ("SET_BASED", "SET_BASED")

  So that you can loop around all the cards and do these things, there are also a few experts on the Exchange utility, allowing you to block of updates quickly
  http://www.Oracle.com/technology/products/warehouse/htdocs/experts/multi_config.zip

  The model is available from scripts, for example to a PLSQL mapping batch you can query the properties as follows:
  OMBDESCRIBE CLASS_DEFINITION 'BATCH_MAPPING' GET PROPERTY_DEFINITIONS

  See you soon
  David

• Satellite P750 - unable to connect an external display via the VGA port

  Hi all

  My problem is the following:

  I tried to connect my P750 (running on W7 x-64) an external display using the VGA cable port. Unfortunately, these devices recognize my phone. Laptop does not recognize the external display, you can see in the graphics settings as additional display, but the screen shows "no signal".

  The computer always identifies the screen correctly, so it seems that there is communication from the screen to the PC, but not the reverse.

  This has been verified with 3 separate screens and television - still the same. All the screens work properly with the other PC.

  I already have:

  -try to play with FN + F5 / "windows" + buttons P - no change
  -install the latest drivers BIOS and video site Web from Toshiba - no change

  Suggestions how to operate? Is it possible that the VGA port is faulty?

  Thank you in advance.

  Hello

  You have the same problems with a HDMI output port?
  Usually, you don't need to change anything to get the external monitor works.
  Press Fn + F5 several times until the monitor RGB (VGA) was selected
  Since you can choose an HDMI output too, you should pay attention to this option.

  Have you tried to change the resolution before using the Fn + F5?
  It s worth a try

  Last but not least, you could set the default BIOS (press F9 BIOS and save the changes by pressing F10). But I don't very well if the BIOS contains some parameters of port RGB (VGA) m

• Connect external monitor via the VGA port > > BSOD

  Hi all

  I have a laptop Acer Aspire V3-772 and I had an (obvious) problem. When I connect an externel to my VGA port my laptop freezes. After that I restarted my laptop (still connected to the monitor via the VGA input) I get the following BSOD:

  video_tdr_failure igdkmd64.sys

  This error I've read on the internet has nothing to do with the video card intel. On this laptop, there intel 4600 internal videocard. There is also a second video card which is geforce gtx 760 m.

  I updated my system completely and everything works fine. Except the VGA port.

  I tested my HDMI port that works correctly, open the same screen/monitor connected via the VGA input it freezes / BSOD.

  One give me advice on what could be the cause?

  is this hardware or software really? I think that the software. In any case I'll try to install the older version of the video card driver intel. I'll post if it works.

  I would like to have some advice on this issue.

  Thank you!

  Thanks for your reply. I tried already. HDMI works very well but even VGA displayport monitor (so double male vga cable) causes system hang still > BSOD.

  I did a factory reset. Same result.

  Conclusion... Its a hardware problem.
  I'll contact support so they can pick up my laptop for repair.
  I lost my weekend for this problem.

  I'll change this topic as resolved since it's associated mobo (intel grappics card).

• Export of the metadata of Essbase via the Calc Scripts

  Hi guys,.
  
  Here's my problem,
  
  We try to export essbase cube intersections in a flat file (so that it can be used by SUN)
  
  )
  
  We have developed a calc script to export an intersection to a flat file, but the flatfile is written only to the location of the essbase server.
  
  But we need this flat file to immerse in an another server (SUN Server), so what would you suggest is the best way to do this on a regular basis (monthly) and huge amounts of data.
  
  
  PS: Someone suggested me to use a windows batch file to move the flatfile, but I have no idea how to do that.
  
  
  Any help would be really appreciated...
  
  Thanks in advance
  Arun

  Metadata? You mean, right? DATAEXPORT is only going to write the numbers, not of dimensionality.

  I did deal with this issue, so - DATAEXPORT wrote only the box to Essbase. You can try pointing to mapped drives, but it has not worked for me.

  Why not put together a script MaxL who runs the calc script (standard stuff so far) and then either the caller script in cmd OS either copy it to another location (if on Windows, see COPY) or use the MaxL shell command to launch a shell of the operating system and make the copy?

  Another solution would be to set up a routine watcher file FTP'd the file off the drive, then did a deletion of the exported file. You may have to wait five minutes, but that shouldn't be a big problem in Informatica. In fact, I bet that informatica can do 99% of it.

  Finally, another approach would be to write that all at a table and just picking up here.<--This is="" probably="" the="" easiest="" and="" if="" you="" think="" about="" it,="" what="" informatica="" was="" meant="" for;="" no="" more="" messy="" files="" to="" worry="" about="" and="" it's="" sql="" all="" the="" way.="" i="" would="" do="" a="" truncate="" after="" it="" read="" the="" table="" as="" dataexport="" has="" a="" habit="" of="" concatenating="">

  Kind regards

  Cameron Lackpour

• Elements 4.0: run the postflight script fails

  I ALMOST built Elements 4.0 as root on Mac OS 10.5.6 successfully (CPU PPC G5).  Towards the end of construction, I see 'missing file' then 'cannot run the postflight script.

  Any ideas?  Thank you.

  http://forums.Adobe.com/community/photoshop_elements

• Problem loading the images with the php script.

  As a webdebdesigner that I developed a cms system to download images with php to a mysql database. Firefox version 5.0.1 for MAC and earlier versions have no problem with the script download. But after this version, it is impossible to upload images more large then 250 KB. The page where the customer chooses his image for the download hangs and the form is not sent to the real upload script, which must validate and process the image.
  This problem only occurs in Firefox, all other browsers work fine!
  In addition to this: give feedback for firefox is not possible for the Mac.

  Try announcement Web development / standards evangelism MozillaZine forum. The helpers there are better informed on issues related to the development of website with Firefox.
  
  http://forums.mozillazine.org/viewforum.php?f=25
  
  You will need to register and log in to post in this forum.

• 2.72 TB external drive via the USB port

  I realize, this is an old post, but I really need help.  I formatted a 3 TB on Windows 7 64 bit external drive connected via USB. I must have formatted MBR but player showed still 2.72 TB of space - great! I copied the backup data on this disc, leaving 129 GB of space.  The problem seems is occurred when I actually copied data that was full of 2 TB.

  After that everything was copied, I went to remove disc and it says that it is in use. I waited for an hour, the same thing, so I restarted the computer. NOW, this drive will rise not on any computer, almost as if he needs formatting / initialized as a raw player! Please help as I have more data anywhere, but on this disc... certainly there must be a way to read data from this drive?  Is there a system I can try to retrieve data?

  I'm on Dell T5500, BIOS = A09.  Most recent update of the BIOS and update Intel RST?

  Thank you!

  Hello

  Go back to your original information you posted, the hard disk had be GPT formatted and not MBR otherwise the hard drive wouldn't format on 2.72 TB.  How can he be a former post office at your first post about it is dated today?

  Removing a hard drive which is currently in use is never a good idea that he could make the hard drive completely unusable depending on what operation is made at the point where the hard drive is removed.