Bad resolution of Qosmio G30 - external display via the HDMI connection-

Similar Questions

• Satellite P750 - unable to connect an external display via the VGA port

  Hi all

  My problem is the following:

  I tried to connect my P750 (running on W7 x-64) an external display using the VGA cable port. Unfortunately, these devices recognize my phone. Laptop does not recognize the external display, you can see in the graphics settings as additional display, but the screen shows "no signal".

  The computer always identifies the screen correctly, so it seems that there is communication from the screen to the PC, but not the reverse.

  This has been verified with 3 separate screens and television - still the same. All the screens work properly with the other PC.

  I already have:

  -try to play with FN + F5 / "windows" + buttons P - no change
  -install the latest drivers BIOS and video site Web from Toshiba - no change

  Suggestions how to operate? Is it possible that the VGA port is faulty?

  Thank you in advance.

  Hello

  You have the same problems with a HDMI output port?
  Usually, you don't need to change anything to get the external monitor works.
  Press Fn + F5 several times until the monitor RGB (VGA) was selected
  Since you can choose an HDMI output too, you should pay attention to this option.

  Have you tried to change the resolution before using the Fn + F5?
  It s worth a try

  Last but not least, you could set the default BIOS (press F9 BIOS and save the changes by pressing F10). But I don't very well if the BIOS contains some parameters of port RGB (VGA) m

• Qosmio G30 - external display problem (HDMI)

  Hello

  I have Dell UltraSharp 2407WFP display with HDMI and DVI (with HDMI DVI converter) entry - I use HDMI as my primary connection. My Qosmio has NVidia 7600 Go card with the latest drivers provided by Toshiba for Vista 32 bit (version 7.15.10.9813).

  My monitor was working fine months ago (same thing with my HDMI TV) I had no problems - but now I have a constant flickering problem (goes black watch my office then becomes black again) computer laptop monitor and no image on external display at all and I get 'balloon' message in the taskbar that my display driver has stopped working and it recovers when I leave my HDMI cable.

  any ideas?

  Thank you
  Bran.

  Hi Brani

  It seems that the error comes from the display driver.
  Why you n t try to remove the old display driver and try to reinstall the graphics driver of the European driver Toshiba page
  You may notice some improvements.

  By the way; It might be useful to know that the Qosmio G30 supports the standard HDMI V1.1 (up to 1080i resolution).

  Good bye

• Qosmio G50-129 no sound with HDMI connection

  Hello.

  I have a Quosmio G50-129. Recently, I tried plugging it into my Sony Bravia LCD TV via the HDMI connection.
  I have video output but there is no sound on the TV.

  I tried to set the HDMI as audio device as default and the sound level meter in the sound properties panel appears to show activity, but nothing comes out.

  Can anyone help?

  Hello

  I m not Qosmio G50 owner, I only have the small F50, but it must be identical to yours I think. So first of all, I must say that I never had a problem with the HDMI connection. Everything has worked perfectly since I used the HDMI connection, the first time

  In any case, if you connect your laptop to an external monitor or TV using the HDMI connection, connect the cable first. After this power on the TV and select the HDMI input right channel. Then go on your laptop and if you press FN + F5, you can change between the different options.

  Normally the HDMI output is automatically set as the default audio device, not to follow these workarounds with good screenshots:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

• Qosmio G30 - E10: display resolution changes from 1920 x 1200 to 1024 x 768

  Hello

  Display resolution of Qosmio G30 - E10 passes sometimes 1920 x 1200 (my default) to 1024 x 768 after returning from standby or Hibernation

  I run Vista Ultimate, most recent display of the download area of Toshiba driver.

  This happened at any time, but sometimes.

  Any solution to this situation of bases.

  Kind regards

  Uwe Meyer, Germany

  Hello

  It's really not easy to say why it happens. I think that it of difficult to reproduce this problem, because it happens that sometimes ;(
  You said you are using Vista Ultimate.
  Have you checked if this happens using the Vista OS since the Toshiba Recovery CD?

  It would be very interesting to know if this occurs on laptop with Toshiba to factory settings.

  I found a thread on a similar theme;
  Someone suggested to update the graphics driver.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22553&MessageID=82906

  Perhaps a graphic driver of the www.omegadrivers.net or www.laptopvideo2go.com might help.

• Qosmio G30 pink pixels on the screen - what can I try next?

  I have a qosmio G30 on the white parts of the screen were pink pixel in them as well as purple pink pixels around parts.

  In reading the various posts, I have eliminated the graphics chip/card that I can get a perfect image on an external display. The laptop is out of warranty and also out of the extra year for graphics problems, so I tried to fix it myself. I tried all of the solutions below and none have worked.

  I wonder if anyone could give me any other things to try.

  I've updated the BIOS and the display driver - no change.
  I then replaced the motherboard to the LCD connection with a new cable - no change.

  And finally, I have replaced the LCD screen with a new - again no change.

  -Always works fine on an external monitor.

  Any ideas or suggestions would be very appreciated.

  Thank you very much

  Hello

  I think you're talking about dead pixels.
  Would this be possible?

  The problem of dead pixels has nothing to do with the graphics card but it s a display problem.
  So I was wondering why this problem persists after the LCD has been replaced

  Maybe a Toshiba laptop technician should verify and test parts of the hardware to make sure what part could be the problem exactly

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• External display via mini display port resolution

  Hello

  I have an iMac 27 "late 2009 with a graphic of ATI Radeon HD 4670 256 MB and the latest Mac OS.

  I just bought a Samsung U28E850R to use as a second screen UHD and connected via the port mini screen iMac to display the port of the Samsung.

  The problem is that it is not possible to set a higher resolution than Full HD on the Samsung. But with regard to the iMac specification 2560 x 1440 should be possible.

  Does anyone know the solution for my problem? Thank you.

  Hello there, riedma.

  It seems that you are wanting to be able to choose from all available on your new display resolutions. The following Knowledge Base article offers strong information to achieve this:

  OS X El Capitan: set the resolution of your screen

  Screen resolution determines the size of the text and objects on your screen. By default, the resolution of your screen is set to display the text stronger and more detailed images. So it is best to use the default resolver, you can manually set the resolution to make the text and objects appear larger on your screen, or adjust it to make the text and objects appear smaller in order to have more space on your screen.

  Depending on how you set the resolution, some applications may not entirely correspond to the screen. Using a scale of resolution can affect performance.

  Define the main screen resolution

  1. Choose the Apple menu > System Preferences, click view, and then click display.

  2. Select chipped, then select one of the options of resolution nationally.

  Define a connected screen resolution

  If you have more than one display, additional resolution options are available.

  1. After that the display is connected, choose Apple menu > System Preferences, click view, and then click display.

  2. Press the Option key while you click chipped to see additional resolutions for the second screen. Then select a resolution option to scale to the second screen.

  If you changed your screen resolution and now there is no picture

  Connect multiple monitors to your Mac

  Set of accessibility options

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• Qosmio G30-141: Question on the use of an external video card

  Hello world!

  Is - anyone know something about external video for toshiba card notes? Like Asus XG Station, Village Tronic ViDock Gfx Pro or AMILO GraphicBooster.

  Will be toshiba develop & manufacture a similar device like them? My rating is Qosmio F30-141 & I want to play the GRID, GTA IV, NFS Shift in high resolution with all the spec.effects.

  Now I play GRID on the resolution 640 x 480 & medium quality). Nice game IMHO.

  PS PS3 & XBOX360? No reason to buy them for my 2-3 cheaper than the console games.

  Hello

  I doubt that the external video card could provide enough power to play these games
  You can connect these via the USB port video cards and I think that the USB port cannot transfer this huge amount of data that would be needed to play games with all the details
  In addition, the graphics card upgrade is not possible on laptops

  I have a desktop PC and laptop. I always use the desktop PC for games.
  The components are easy to update and I can build a game machine clean with the best GPU, motherboard, and processor.

  See you soon

• Qosmio G30: No sound via HDMI after installation of Vista

  Hello..
  After installing Vista on my G30 HD DVD I have no sound on any application via a HDMI cable. Sound works fine on the internal speakers. He also worked very well under XP. Can anyone help?

  Hello

  The noise does not appear on the external HD TV which was connected to the Qosmio G30 via an HDMI cable. But the internal speakers work. Am I wrong?

  Buddy you check the sound options in the control panel?
  Check if all controls are set at a higher level and are not disabled!

• No display via the connection HDMI Qosmio X 300-11 L

  Hello community,

  I have a problem with the connection between my laptop Qosmio X 300-11 l and my LCD TV Toshiba 32R3550P. If I connect
  my laptop computer Cup on TV he detected a Regza Link on the good Port HDMI and Toshiba laptop shows on the screen. If I turn on
  my laptop it starts successfully, but before the Windows login mask appears that the laptop screen goes black. FN + F5 does not work. If put the dial up on laptop on TV th
  computer laptop screen turns black as soon as I connect the HDMI cable into the port. FN + F5 does not work. What is the problem?

  I use the Nvidia driver 186.81 the Toshiba Homepage and I have a Windows 7 64 Bit OS.

  Could someone help me, please.

  Kind regards
  Stefan

  Hello

  I'm not sure if this could be useful without checking this Toshiba document:

  + Can not use 2 screens simultaneously on the Qosmio X 300 with SLI (PQX31E). +
  http://APS2.toshiba-tro.de/KB0/TSB9802OJ0000R01.htm

  It is recommended to change the power settings for the 'save energy.

  Usually, this solution is related to the use of both screens at the same time but it of certainly worth a try!

• rMbp mid-2014, external display with the quality of the retina

  Hello!

  I buy a Dell 24 "external display to connect to my rMBP with QHD (2 560 x 1 440) resolution.

  http://www1.euro.Dell.com/content/products/ProductDetails.aspx/Dell-u2515h-monit or? c = en & l = en & s = dhs & cs = frdhs1

  I have connected the screen to my mbp with the mini display / port cable supplied with the display screen. It works well, but I don't have quality of retina at all (the images seems good but the text is terrible)

  The text have a bad record as a retina screen, and it makes a big difference when I spend my retina display to the external display which is not comfortable at all.

  I though that this kind of screen was OK to view the retina... but I was wrong. I try to connect with minidisplay / display and HDMI! HDMI made was worse than minidisplay. The res in the system report show was good 2 560 x 1 440. I even try the hack to force with the patch, but always bad RGB render text...

  More important, I want to, it's having the same record as retina on the text and images. What external display can be good for this?

  My budget is 450-€500

  Thank you

  The size in pixels of the screen is not mean much: a small display to 2560 x 1440 pixels seems much sharper than a widescreen 2560 x 1440 pixels.

  Your retina Macbook has something like 220 dpi (DPI in English), the Dell screen only 117. If you want the same sharpness, you will need to choose a display with 220 dpi. But then, everything on the screen will look much smaller. Here is a tool that allows you to get the idea: http://dpi.lv/

• Qosmio G30-140 - cannot adjust the brightness of the screen on Windows 7

  Hello

  I installed Windows 7 on my Qosmio G30-140, but I can't adjust the brightness settings.
  Instead of allowing me to place the cursor on any position, I want that I'm stuck with only 3 steps which elect to.
  The last of them is way to bright and my eyes keep tear having to deal with this crazy amount of white, especially on white background.
  The other two are very, very dark.
  What is going on? I installed the right Nvidia drivers.
  Also, I can't adjust the brightness using the FN keys on my keyboard. They simply produce no result at all.

  Need help appreciated, I can't work like this.

  Thank you!

  Hello

  The brightness of the display can be controlled by the FN + F7 and Fn + F6.
  I think you should install the VAP and buttons of the Support of Flash memory card utility in order to get this to work!

  Check the added value Package and Support Flash Card which are released for Satellite L500 utility or new models of laptops.
  In my case it worked!

• Qosmio G30 - white lines on the screen and BSOD

  1. I have a Qosmio G30
  2 operating system Windows XP MCE
  and I have problem "white lines on the screen ' when windows start to load after that I got the"blue screen of death"and restart the computer.
  I try to get back, but unfortunately came with the laptop recovery CD doesn't seem to work...

  Whenever I finished to recover I have "windows loading files" and once this is done, it shows me the so-called "blue screen of death"...

  Hello

  I m afraid. I have bad news for you ;(
  I think you ve you have a problem with the hardware in my eyes, there might be something wrong with the GPU chip.
  The white lines on the screen could be related to a faulty graphics card and get the BSOD error due to a hardware malfunction or software serious questions

  I m sure that the recovery CD does not contain software problems and therefore only the fault of hardware could be the reason for the lines on the screen and the BSOD.

  In my opinion, you should contact the ASP in your country for assistance if all goes well you guarantee is valid.

  Good luck