External disk HARD PX1267E - 1 32 does not not with Vista

Similar Questions

• Satellite Pro A30: after disk HARD replacing the BIOS does not see DVD or HARD disk

  Hello

  I bought a new Pro A30 of Satellite earlier.
  Shortly after, I noticed the system sometimes
  would freeze, with a rattling of the HD.
  A reboot cold was the only solution.
  I was told to replace the HD I did but the
  problem persisted with the new HD.

  I tried a known working HD and the problem still persisted.
  At this point, the warranty period has increased.
  Frost started happening more regularly, and
  now, the BIOS does not recognize the HD player or DVD.
  It starts and then try to boot from the network,
  because he doesn't have a HD or DVD player.

  At this point, I think I need a new system board.
  Someone at - it other advice or seen this problem
  before?

  Thank you
  Ray

  Hello

  What happens if you remove the CD/DVD drive or the HARD drive?
  The laptop recognizes one of these devices?
  Have you used the devices recommended by Toshiba?

  in any case, this seems very strange and the dysfunction of the motherboard is not impossible

• External drive HARD Toshiba 1 TB does not work on my laptop but works on another PC

  Hello
  I used my drive external HARD for almost a year with no problems until now. When I hook it up to my laptop and try to open it, the computer laptop everything freezes and I can't do anything.
  It is recognized in the Device Manager where it says "this device cannot start. Code 10 "and"the process of hosting the driver for this device has finished".

  Should I try to uninstall and reinstall even if it works without problem on another computer?
  USB ports on my laptop seem to be OK that other devices work well.

  Thanks for help.

  It looks like a USB driver problem.
  I think you should first disconnect the HARD drive.
  Then go to Device Manager, look for USB hubs and controllers and uninstall/delete all the USB controllers.
  After that, restart the system. Wait for USB devices deleted would be recognized and then connect the USB HDD to one of the USB ports.

  I hope this helps.

• Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Have already tried to contact Adobe and they told me to reinstall the program. I did this and the same issue. It's crazy. I can not turn off something that I did not more...

  Thank you.

  No - I had, of course, tried all these things. Finally, I had someone (after several days) on the personal chat group that could fix and it did it in a few minutes. Too bad that nobody else seemed to be able to do. Adobe is very soft.

  I can't thank enough the other person - it was amazing.

• I thought that if I want my machine to boot faster I can move the fonts of the lokal disk documents folder so it does not start them all at the start

  original title: Fonts folder

  I thought that if I want my machine to boot faster, I can move the folder of fonts of the lokal disk to documents so it does not start them all at the start, and since I got them in the documents that I usually have no error saying that im their lack is this true? I have enough disk space hard as I don't care to remove them the reason why I want to do is if my machine starts as soon as possible thank you in advance!

  Don't listen to anyone who has you said that.
   
  The best way to speed up your computer is to eliminate startup items which are unnecessarily run at startup.  Go to start | Search and type msconfig and then see what is running at startup and what other services are underway then as well.  You can eliminate selectively and then evaluate how fast your computer runs.
   
  Steve
   
   
   
  wrote in message News: * e-mail address is removed from the privacy *...

  I thought that if I want my machine to boot faster, I can move the folder of fonts of the lokal disk to documents so it does not start them all at the start, and since I got them in the documents that I usually have no error saying that im their lack is this true? I have enough disk space hard as I don't care to remove them the reason why I want to do is if my machine starts as soon as possible thank you in advance!

• How to fix iTunes?. It no longer starts. I reinstalled 10.3 and updated 10.6.8 repaired, repaired disk permissions, but it still does not boot to the top. TIA Pietrowiak

  How to fix iTunes?. It no longer starts. I reinstalled 10.3 and updated 10.6.8 repaired, repaired disk permissions, but it still does not boot to the top. TIA Pietrowiak

  There is a Snow Leopard update that would probably help.  It's called 10.6.8 Combo update.  Download and apply.  Then discover iTunes.

  https://support.Apple.com/kb/dl1399?locale=en_GB there is also a supplement that should also be downloaded.

  http://support.Apple.com/kb/DL1429

• just has got rid of the virus and responsible for all the disks but given the wifi does not work

  WiFi doesn't work do not

  just has got rid of the virus and responsible for all the disks but given the wifi does not work

  Hello

  Check with the system manufacturer or the actual WiFi device manufacturer and ask in their forums (if any)
  for problems known.

  Actually, try updating your driver:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• XPS 1530 internal mic not working not not with Vista

  XPS 1530 internal mic not working not not with Vista

  Hello ThomasBarnette,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, it seems that you are having problems with the internal mic.  As I understand the internal microphone does not work.

  Download and install the drivers for the Chipset from the link below and check.

  http://www.Dell.com/support/drivers/us/en/04/product/XPS-M1530

  Answer to us if you are having problems with the internal MIC or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Fantom II of GreenDrive USB 1 TB external hard drive eSATA drives does not appear

  Player installs but does not appear in the player list and cannot be accessed.

  Hello

  1. were you able to connect the front USB hard drive?

  2 have you made any changes to the computer before the show?

  You can try to connect any other USB device to the computer and check if you are able to access it or not.

  You can also try to connect this Fantom Drives Green Drive II ESATA USB 1 TB external hard drive to another Windows XP computer and check if the problem is with the drive hard or computer.

  You can run the fix it or follow the manual for troubleshooting steps described in the link below to fix the problem.

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• External hard drive detects but does not open without formatting

  I can't open my external hard drive. In computer science, it shows just K of disk space, but there is no reading of storage. It says 0 bytes of free space and used as 0 bytes space as it will not be open until I have format. Any kind of help, please let me know. Its a backup disk that have been most hard, though don't know if its of any help.

  Hi Deborah,

   

  I imagine the inconvenience that you are experiencing right now. I will help you on that.

  Formatting a disk means configuring the disk with a file system so that Windows can store information in there. Usually, when you install a new hard disk on your computer, it must be formatted with a file system, such as NTFS, Windows can store files that it contains.

   

  Please answer the following questions so that we can better help you.

  1 - is the specific problems of a hard drive?

  2. is it the problem persists when you use different USB ports on the same computer? If 'yes' then tick the question in another computer and let know us the results.

  3. don't you make changes to the computer before the show?

  I suggest to follow the steps below and check. Please move to the next, if only the problem persists after completing each.
   
  Method 1
  Convenience store equipment and peripheral performance such that it can solve some common problems associated with the hardware attached to the computer. Follow the steps from the link below to be executed, which.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2
  Run Windows updates and check if you have any availability for USB drivers. You can check the link below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN
   
  Method 3
  Access the manufacturer's Web site and download the USB, the BIOS and drivers from the chipset and check the issue.
   
  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved.
  Changes to settings are at your own risk.
   
  I hope this helps. Please write to us if you need further assistance.

• my 1 TB get failure HARD drive now its does not work, I had used Bitlocker on a driver... everyone can view the data of the disk without password?

  my hard drive does not, makes the noise, and I don't see in my computer...

  a disk is locked using bitlocker... I go to repair hard disk...
  but I'm afraid that my data in the bitlocker drive safe? No one can access without password?
  and what happens if the hdd is irreparable? I will come back my data?

  its working fine now I have clean the power cable from the HARD drive... now my drive HARD works very well... I thank all for answer now, I know the work of the bit locker

• I bought a new external hard drive, but it does not appear in the library mode.

  One of my external hard drives is almost full. I would like to move some of the photos from the old to the new one that I just bought. The new external drive appears in Windows Explorer, but does not appear in Lightroom.

  I use Windows 7 and Lightroom CC.

  Hi Loyce1023,

  In order to see the most recent external drive in Lightroom, you must either import some images of the most recent disc.

  Or move some images of the old drive to the more recent, outside of Lightroom, and then reconnect the images from Lightroom.

  Kind regards

  Tanuj

• Backups taking over 130 GB of 160 GB, getting 'Startup Disk Full' and the computer does not. Help!

  I fight for free space on one of my older iMacs work and I am to the point that we cannot use it because the startup disk is full.  I've recently upgraded to Snow Leopard OSX Lion (10.7.5) so I could update our video editing software, Adobe Premier.

  We run all our video projects on external hard drives, which does not have the boot disk space and are always good on the erasure of files from the Recycle Bin, audio, photo and video so that they are not get bogged down.  About this Mac shows my 160 GB boot drive contains 8.87 GB Audio, 7.69 GB, 6,49 Photos GB movies, 6.58 GB Apps and a huge 129.34 GB of backups.  I have time Machine backed up on an external hard drive and can't seem to find out where these files are to be removed from the startup disk.

  Turn off time Machine and restart does not clear space.  I have even made the Terminal kill command no matter what auto backups, deleted device and old library version in iTunes, etc.  and I have no backup label appears when I bring up the screen of star wars of the time Machine. I went through so many stages and suggestions to get this machine working again.  I understand these backups are supposed to remove themselves automatically, but why are there still first place if I save on the outside?

  PS I'm not very computer savvy, but I know my way around.  Additional suggestions are appreciated - please let me know if I need to provide more information.

  http://www.howtogeek.com/212207/how-to-free-up-space-used-by-time-machines-local - backups on your mac.

• Toshiba USB external disk HARD STOR E art 3.5 "

  Have the HARD drive connected to the laptop with windows 7, but the HARD disk is not recognized. Try to connect to other USB 2 ports, but the result is the same. use a USB key to test the 3 USB ports, they are ok! In the maneger disk does not show the HARD drive. Connected to other laptop with windows 7 has been recognize, did a format and for file sistem, I use the NTFS option.

  Exactly the same problem, for a first purchase of Toshiba products, I was nervous, purchase of a Toshiba drive, I now understand my nervousness...

  Windows 7 + * 64 * BIT +.<>
  1 TB Store Art external USB

  Player works 100% in Vista, Linux etc...

  Windows 7 + * 64 * + BIT doesn't work, detects no road at all... and you can not change the drive letter if windows does not detect the disc, Device Manager does not display no device listed in all.

  My drive is less than 2 months, I am curious why I'm not able to run this new drive in windows 7 64 bit Toshiba recalling at the...

  "Windows®. Life without walls. Toshiba recommends Windows 7. »

  All my other external drives work 100% on Windows 7 64 bit

  Would really answers from someone at Toshiba with a fix, or where I can send this drive back to get my refund!

• external disk hard Windows Media 11 & wma - DRM music files format

  11 of WMP LOVE for music! - But storage is full in XP to a PC the Syetem - external hard disc Segate 1 System. 5 t office. Let the Seagate nursery copy my music file to drive C (new) F Drive. Added to the location FDrive/My music for WMP monitor & removed from the location of drive/C. WMP acknowledged the location F/disk/My Music (new) & listed music but not of ALBUM. I tried the INFORMATION of MEDIA to APPLY - failed - tried the FIND ALBUM INFO & UPDATE ALBUM INFO-kind of worked but apply same info Album to 3-4 different records artist. Renounced this place of MY application, deleted and removed from f-Drive music. Tried to drag the folder music from the disc C to F - disk - started OK with 1 artist folder-2nd & 3rd but on 4th record combined all files in the folder 1 and missing album artwork. Won't no matter what futher deleted MY F-player music file again and started reserching problem on Support MS and Segate support-not much info in the problem of location of ether, however in the Support found MS ID of Article: 92576 - YOU cannot transcode DRM-protected media in WMP 11.  All my music is WMA - DRM format - SEVERAL CONCERTS! -do not know if this format has nothing to do with the problem?

  I m confused and do not know what is on the extension of my storage and the WMA DRM format. Please give advice on how expand storage, format WMA-DRM, to maintain and use Windows Media Player as I have in the past. I tried other music media but have found nothing better than WMP-(donc pour)

  The files are in WMA format, does not mean that they are protected by DRM. In addition, transcoding, conversion from one format to another (for example during synchronization), which is not relevant here.

  In WMP, please go to Tools - Options - Library (press Ctrl + M, if you don't see the Tools menu). Is music to reorganize in rip music folder checked? If so, uncheck the box and click OK. Then try to move the files of music again. It works correctly now?