External drive are more recognized.

Similar Questions

• my dvd/cd drive and all other removable drives are more recognized since an update from microsoft

  I need help! My CD/DVD drive has disappeared, it is not even in the BIOS, and all the other removable disks since I installed an update from Microsoft. I went through all the troubleshooting steps and nothing has worked, including the fix it. How can I fix it? I contacted Microsoft and back an email that I had to PAY for technical support to resolve this issue. Which seems hardly fair since there was an update on their part that messed up my laptop. I have a Gateway MX8738 with Vista Home Premium. I have not seen the error messages it just that there is no CD/DVD drive installed and when I check in my computer the only things that are displayed are the drives C and D.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case
  (Read burn CD & DVD and CD and DVD). It's not unusual for 1 or 2 parts to not
  function, while others do so correctly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates
  and the correct registry entries for your car.

  Here are the keys to what I believe are the ones in question - for the CD/DVD drive subkeys
  course because there will be other subkeys in these keys. Do not forget to ask involved specific keys
  as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even right for registry settings
  your CD/DVD from someone with the same drive model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• After the September 2016 ioS update my iphone or my ipad are more recognized on my laptop

  After the September 2016 ioS update my iphone or my ipad are more recognized on my laptop

  What do you mean on your laptop more?  Please provide details.

  Best,

  GDG

• My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

  My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

  You can check with the manufacturer of the camera, whoever it is.

  You can also remove the memory card and put it in a card reader that plugs into a USB port.  If you do not, you can buy them for about $3 in computer stores.

  Good luck.

• Drive SD-R6112 are more recognized - 19 Code error in Device Manager

  Hello!

  I have two lenses (one internal, one external) who suddenly are not recognized. Both are appearing in Device Manager with the same error as follows:
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  After uninstalling and re - install them both several times, including resetting devices still not change state.

  Currencies are: DVD-ROM TOSHIBA SD - R6112 (internal)
  TSST corp CD/DVGW SH-S182M peripheral USB (external)

  Both devices worked very well the last time I was on my laptop, 2 days ago.

  I guess I have to delete some registry entries, but without details, I'm not going there!
  Can someone help me?

  Thank you very much
  Photographer for customers waiting for pictures...
  Susan DeFurianni

  To my knowledge a registry problem was detected. This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  As far as I know Microsoft provides these options of solution:

  Click on uninstall and click Scan for hardware changes to load a usable driver.
  Restart the computer using safe mode, and then select last good known Configuration. This cancels the last successful configuration of the registry.

  In addition, you can try to remove the Upperfilters and the LowersFilters of this registry entry:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4 D36E965-E325-11CE-BFC1-08002BE10318}

  If it doesn't help then access Device Manager Reinstalls the channel primary and secondary section ATA/ATAPI IDE controller and reboot.

  Good luck and bye

• External hard drives are not recognized by Lr4

  When I plugged my two external hard drives to my computer this week, Lr4 does not recognize them. Each folder has a question mark by it.

  Appreciate any help... Thank you!

  Dave, none of us "aid" are employees of Adobe, we're all users just like you... it is a user forum where we all help each other.

  Return to the specifics of your problem, "eject" is a function, you should find the area of the Windows taskbar system tray, but you may need to click the little pointing up (marked in blue on the attached screenshot) arrow to 'show hidden icons', which will reveal a bunch of other icons and the one you need is marked in red. Click on that to reveal a list of devices that can be ejected, select the one you want and wait to be advised that it is safe to unplug.

  To be honest, I would never disconnect a drive just unplug him.

  Regarding your other external drives, like I said that Windows will assign the first available drive letter, unless you use the "edit the drive letter" option to assign a specific drive letter... in this case Windows will remember this assignment and will subsequently always use this letter provided it is available at the time of reconnection. In other Windows do not book the drive letter, but it will use it if it happens to be available.

  For this reason that I attributed to all drive letters my backup hard drives that I regularly remove after use, so I know I will always get the same letter each time (which is fundamental to my backup strategy).

• After I installed Windows 7 on a new hard drive, my 3 external drives are not get detected.

  I have three external hard drives and they worked perfectly, until I had to renew my hard drive with a new drive with a new installation of windows 7. Now my computer will not reconise any of the readers. they do not show in the Device Manager either. It is said that all the hubs work perfectly. USB flash drives work OK. IM puzzled. All drivers have been updated with the driver update

  Thank you very much

  Original title: external hard drive

  Hello

  You get the error message?

  Method 1: I suggest you to run the hardware and devices troubleshooter.

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I suggest you to check if the drives are displayed in disk management. If the drive is available in disk management, and then assign the drive letter.

  1. Sign in as an administrator or as a member of the Administrators group.
  2. Click Start, click Control Panel, and then click performance and Maintenance.
  3. Click Administrative Tools, double-click computer management, and then click disk management in the left pane.
  4. Right click on the drive, the partition, the logical drive or volume that you want to assign a drive letter to and then click change drive letter and paths.
  5. Click change.
  6. Click assign the following drive letter if it is not already selected, click the drive letter that you want to use, and then click OK.
  7. Click Yes when you are prompted to confirm the drive letter change.

  The letter of the drive, partition, or volume that you specified is changed, and the new drive letter is displayed in the appropriate drive, partition, or volume in the disk management tool.

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Windows update - USB devices are more recognized after installation

  I had to restart my laptop to install the updates. Once the update is completed, I had 'one of your disks should be checked for consistency. Finally, I uninstalled all recent updates and arrested "windows update". A question, I have (both after windows update installations but also uninstall the updates), is that my USB devices no longer work. There is no error message, it does not detect my mouse or my external hard drive. There is power that the external drive indicates the power and my pad colling runs, it just does nothing. Anyone able to help?

  Also, was not able to run chkdsk - nothing happens

  Have been able to solve this problem by creating an ERD and a running windows repair option. Everything works now.

• Alert security Windows Vista - presentation are more recognized

  Since 3 days when I turn on my computer, I see the shield red/white X of Windows security alert in the notification area of the taskbar (lower right corner).  When I click on the alert, the message under Protection Malware says: The Shield Deluxe 2009 Antivirus (installed since 6/09) is on, but its status as a statement to the security of Windows in a format that is no longer recognized.   I have rcv automatic updates of Windows and the latest definitions for Defender are installed (KB915597 definition installed on 04/02/10 1.75.377.0 & definition installed on 08/02/10 1.75.517.0.  The Shield Deluxe is auto-updated on a daily basis as well.  I got an alert from Sun Java Update for more than a week now.  Thinking that this might solve the problem, the latest version this AM and restarted.  Always had Windows Security Alert.  The only other thing different I did was run a utility of IYogi - registry cleaner.  An overview of this greatly appreciated glitch!

  After having experienced the same message with the Shield Deluxe on my PC, I called the support staff of the shield. They said not to worry about this.
  The problem is caused by an update by which Vista Security Center does not recognize the shield. If the alert message gets on my nerves
  You can turn it off. I don't remember exactly how I did it, but I think it's somewhere in the Windows Security window, where it says "change how Security Center alerts me". Your computer is always protected.

• pen drives are not recognized

  I found that my USB does not work in my laptop. but it works in others. In addition to other USB key do not work in mine. before that the problem, when I was in my USB, my laptop wanted to restart, then that was the problem in formatting.  How can I solve this problem without setting up windows?

  Hello

  -Is the pen drive detected when connected to the computer?

  -Do you receive an error message in the notification bar when you plug the pen driver?

  If any USB devices are not detected on the computer, then I suggest you try the steps in http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/usb-device-not-recognized-in-windows-7/8106a712-a13e-4ca5-b82e-c3961cc254b1

  Hope this information helps. If you have any questions, please let us know.

• DSLR images are more recognized? Adobe Premiere Pro 8.2.0, OSX 10.10.2

  A few months ago, I upgraded my mac to Yosemite and around the same time updated first.

  First CC 2014 now has major problems with DSLR images.

  First of all, I could get some DSLR footage in, but every time that I rubbed through it in the timeline panel or monitor the image source would freeze, then the software would be locked up.

  The film worked well on a PC running the latest version of first, and there is nothing unusual about this film-. MOV, .h263, same type of material that I work usually with,

  I tried to open several other projects (mainly in the non-DSLR images, but.) Vom exported by other sources) and CC 2014 works very well with it, so I think it's just something specific to this sequence.

  Today I try to do a few different sequences of DSLR first CS 2014 and it won't even find themselves in Media Browser. I try to drag the. MOV file and I get an error that the file is not recognized. I tried dragging a file from my internal drive, same problem.

  I still have installed 7.2.2 (finally the complete liberation of Adobe CC before it was a new wording 2014). Who takes the fine images in Media Browser and rub through it, as I expect.

  What is going on? What is Yosemite? Is this first 8.2.0? Adobe dropped suddenly supported native DSLR files and now expect us to transcode everything?

  Help, please.

  -Brian

  Yes, I'm not sure why Vinay response was an agreement policy: it would have been useful to show publicly.  I didn't uninstall Premiere Pro CC 2014, you click Yes to delete the preferences also, then immediately re - install.

  Here is the message from Vinay:

  Hi Brian,.

  We noticed this problem recently on 10.10.2 and we are trying to find the possible cause and according to the information I have this problem could occur due to licensing issues. So, it might be in the process of upgrading OS license files are corrupt but right now I can't comment on that. Please follow the instructions to clean uninstall Adobe products and the re - install again.

  Please uninstall all Adobe applications manually in the Applications folder one by one. Once pass below places and delete specific files.

  ~ Files / folders ~ click on the menu go to in the finder, then select go to folder option type these location and click go to navigate

  / tmp

  / Applications/Adobe *.

  / Applications /. AdobePatchFiles (hidden, use Go > order of the folder)

  / Applications/utilities/Adobe *.

  / [Startup disk] / Library/Application Support / Adobe *.

  / [Startup disk]/Library/Preferences/com.adobe*

  /Users/ [user] / Library/Application Support / Adobe *.

  /Users/ [user] / Library/Caches/Adobe *.

  /Users/ [user] / Library/caches/com. Adobe *.

  /Users/ [user] / Library/Preferences/Adobe *.

  /Users/ [user] / Library/Preferences/com. Adobe *.

  Once the premises are cleaned. Please reinstall first Pro CC 2014 just to check if it works very well. Once activated you can reinstall all applications.

  Please PM me once it is resolved.

  Vinay

• Qosmio G30 - SSD drives are not recognized

  I have a Toshiba Qosmio G30-140 with two hard drives.
  One with Windows 7 and the other with XP.
  The system allows to start the 1st or the 2nd.

  To speed up the system got two Samsung 830 Series SSD drives
  model: MZ - 7PC256.
  The BIOS (BIOS ACPI version = 3.90), do not have the option and I have AHCI, I adopted
  1RAID-0.
  In this option, the discs to work independently.
  They work well, but the "Samsung SSD magician" application, does not recognize
  No SSD.

  I'm afraid that you do not work in the best conditions and which could have
  best performance.
  Thank you for helping understand me what isn't here and can improve the performance of SSDS magician.
  Thank you

  Hello

  I don t use this software Samsung SSD magician, but some people in the net reported that there is a new version of this utility in addition many people have problems using this software and this issue seems to depend on laptop but possible on the SSD drive.

  As much as I know there are other tools like Driver Magician or SSD Tweaker that perform similar functions as magician Samsung SSD

• Drive WD 4 to external drive is not recognized by T410

  Hi all

  I have a 4 TB HDD that I use to return to the top of my desktop PC. I remember to backup my T410. When I plugged it, it the laptop recognized that there is a new device and tried to find the right driver for it. Unfortunately he doesn't no and.

  My os is windows 7-64 bit.

  Is this a problem with the T410? is there a way to fix this?

  See you soon

  Zeyad

  I found the problem. The problem was that windows didn't download the appropriate driver. I checked under Computer Management - storage and could not find the drive. When I checked under devices and printers that I found the hard attached by non-functional disk. So I simply searched for the appropriate driver and the problem is solved.

  richk thanks for your response.

• Fellowes computer Pocket mice are more recognized

  Hi, I have a Fellowes laptop mouse that connects via the USB port. I had trouble w / it stops working, but I was able to deal with it by changing the ports.
  Now - he says USB device not recognized ". It will not work on a port. I use an HP Mini laptop.
  The part # on the mouse is FDM - G51. I got it for about 4 months, and it's the 3rd I've had exactly like this. Others lasted for many years.
  I tried to find a driver for it but can't. The only mouse listed on my control panel is the synaptics on the phone pad.
  What can I do? I have carpal tunnel syndrome, and this mouse is very useful for me. I guess I should add that it came from Taiwan, when I ordered it, and I can't find it on the site of Fellowes.
  Thank you very much!

  Hello

  Thanks for posting this question in the Microsoft Community.

  1. have you updated to Service Pack 3 installed?

  2. what security software is installed?

  Let us try these methods.

  Method 1.

  This tutorial is designed to help you identify and fix the mouse, touchpad and keyboard problems in Windows. Plug the mouse and run the troubleshooter first to check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-in/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Method 2.

  We can refer to this article and check if that helps.

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• Seagate 2 TB usb hard drive are most recognized in xp pro

  Seagate 2 TB usb 2.0 has been recognized by xp pro, but now is not.
  Suspect that it was one of the MS updates
  Drive is recognized on W7 and is accessible. However, it's a laptop and
  not where I want to use.
  Any suggestions?
  Thank you
  Roy

  Hello

  Thanks for posting in this forum. I understand that a Seagate 2 TB USB has been detected.

  Try the methods and check out them.

  Method 1:

  Check out the link and then run the troubleshooter of material and check.

  How to solve problems of hardware and software drivers Windows XP

  http://support.Microsoft.com/kb/322205

  Method 2:

  You can install the latest drivers for the drivers and check, check out the link and follow the steps.

  How to download updates that include drivers and hotfixes from the Windows Update Catalog

  http://support.Microsoft.com/kb/323166

  You can also visit this link and follow the steps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658