Windows update - USB devices are more recognized after installation

Similar Questions

• Some USB devices are more recognized when plugged after upgrading Fusion 7

  After reclassification of the merger of 6 to 7, some USB devices, specifically webcams is faster to connect to Windows (guest) or Host (osx).

  They also no longer appear in the USB & Bluetooth under the Virtual Machine settings.  Anyone else see this problem?  Try to understand this point, I completely uninstalled merger to try to solve this problem.  Webcams work fine under OSX itself and are usable.

  7 merger supports a virtual USB camera, that can be added as a new device in the virtual machine settings. This allows the physical camera (USB or integrated PCIe FaceTime HD) to share between the host and the VM at the same time.

  There is currently no option in the settings of the VM to UN-hide USB cameras for passthrough to the virtual machine, but it can be done with a preference.

  Edit the ~/Library/Preferences/VMware\ Fusion/preferences file and add the following line:

  vusbcamera. PassThrough = 'TRUE '.

• My USB devices are not recognized, but they have a power

  My USB devices are not recognized, the only ones to be recognized are my mouse and keyboard. Each device is powered (motherboard works fine), but Windows 7 isn't their read (although sometimes I'll get a code 43). I have the latest chipset.

  I tried right click and uninstall each device and rebooted the computer. Nothing has fixed this.

  My external hard drive, ipod and other devices that involve the transfer of data seem to ONLY get power and nothing else.

  It is not material because all my devices work on my laptop. Also my motherboard works fine (it's the 2nd RMA) and it has been tested at the factory to make sure of him.

  I would really appreciate help with this

  Hello

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2:

  Try to uninstall and reinstall the USB controllers

  a. click the Start button.

  b in the start search box, type devmgmt.msc and press enter

  c. expand Bus USB controllers

  d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  I would also ask you to contact the manufacturer of the computer to help.

• My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

  My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

  You can check with the manufacturer of the camera, whoever it is.

  You can also remove the memory card and put it in a card reader that plugs into a USB port.  If you do not, you can buy them for about $3 in computer stores.

  Good luck.

• But powered USB devices are not recognized

  Randomly on my personal self built computer, readers usb ceased to recognize anything I put in them.  The strangest thing is that the devices kept under tension.  The mouse led would light up and charge the ipod.  I had to plug into an old school mouse and keyboard that do not use usb to use the machine.

  I tried:
  Unistalling/reinstalling usb drivers
  Update BIOS
  Uninstalling drivers for devices (ipod, keyboard, mouse, external hard drive)
  Updated motherboard drivers
  Compensation to reinstall Vista

  I'm really confused on what else to try.

  Data sheet:
  Q6600 2.4
  750FTW
  500 GB WD 7200 RPM hard drive
  2x2gb gskill
  EVGA 9800

  Any ideas would be useful.  Right now, the only thing I can think is to replace the motherboard, but I feel that I would not.  Thank you.

  Hello

  If you can not embedded USB to work then you can disable it in the BIOS and the device
  Manager and use a USB expansion card that is not expensive.

  Check the BIOS settings.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your player (maybe
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

• External USB devices are not recognized

  * Original title: Ext usb devices appearing is not in my computer

  ACer laptop WIn 7 amd a8 quadruple-heart: when I log about 1 T external usb 2.0 or 3.0 hardrives or key USB 64 G,.
  Device Manager displays the devices, but they do not appear in the list of computers. I have other ext hardrives and the keys that operate without problem.
  I have to go to disk management and see that they appear but they do not have a drive label assigned.
  Then I have to give it a label letter manually it will appear under my computer.

  I tried the same features on a laptop HP with Windows 7 without all these questions.

  Thanks RTierra

  I have found a more permanent solution. At the command prompt, type Diskpart

  type

  automount

  If the answer says disabled, type

  automount enable

  Once I did, my USB keys have been recognized automatically when it is plugged.

  Why the setting has been disabled? who knows.

  I hope this helps others.

• After the September 2016 ioS update my iphone or my ipad are more recognized on my laptop

  After the September 2016 ioS update my iphone or my ipad are more recognized on my laptop

  What do you mean on your laptop more?  Please provide details.

  Best,

  GDG

• Vista - usb ports are not recognized unknown device

  Vista - usb ports are not recognized unknown device. any usb device it appears unknown. all worked a few days hardly, but after that I connected my Kodak camera - which does not, now, nothing works. Any help would be appreciated.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Try to connect USB devices to a different USB port and check if you are able to access.

  Method 2:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Try to connect the camcorder to the other USB port and on the other computer and see if the problem is resolved.

  Method 3:

  Let us try to disable the Antivirus security software and check the number.

  Re-enable the security software after checking the issue.

  You can also try disabling the firewall and check the issue.

  Re-enable the firewall after checking the issue.

  Method 4:

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Check whether the problem is resolved.

  You can also check out the link below.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6be4581d-8fbd-407F-815E-b475c35ca586

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Why, after several months, when checking "installed updated history, there are more than 50 copies of 2 updates?

  Original title: windows updates

  Why, after several months, when checking "installed update history, there are more than 50 copies of 2 updates, KB30744230 and KB307450. Almost daily show several updates for each.

  To repeat the Net Framework updates are trying:
  http://support.Microsoft.com/kb/976982

• Win 7 failure update USB (keyboard and mouse fails after reboot)

  Hello

  I use a Z-220 workstation. Today (2 September) after the weekly MS updated some (mouse keyboard Plantronics headset) USB devices no longer works after the restart.

  So I use a gadget of mouse (very simple HP give) and the keyboard on the screen to access the workstation.

  Does anyone have an idea what the cause?

  Thank you!

  Peter

  It would seem then that some Windows Update screwed to the top of the application of Digital Signature.  I've seen Windows updates do something funny on some computers, but this is a first for me.  Microsoft updates have been buggy lately to not feel alone.

  You may need to use the F8 key until a new update of Windows solve the problem or Logitech Updater provides a new driver.

  I've attached Logitech tips for reference.

  http://Logitech-en-AMR.custhelp.com/app/answers/detail/A_ID/9084/~/my-MX-3200-keyboard-keys-are-not-responding

  If you wish you can query Logitech support if they know something.

  Unfortunately, that's the best I can do, but at least you have something.

• ProBook 4740 s will not feed if USB devices are connected

  G ' Day, I have a ProBook s 4740 and after taking the laptop to the site, when I'm home and plugged things back, by pressing the power button would see it for a few seconds and then od light out. The LED above the power would have flashes once and then turns off. Needless to say, it would not start up.

  After a lot of frustration, I found that by unplugging all (wired Ethernet and USB devices) and by pressing the power button it would start up and even when starting I could plug the devices and everything is OK.

  I had to return to the site today and when I came back again, it wouldn't power up until I unplugged the USB devices. USB devices are external hard drives only, all running through a powered USB hub.

  This configuration has worked without any problems for wells in the year I've had the ProBook.

  This could be the cause?

  Thank you.

  The last update :-)

  After downloading the BIOS update, I decided to wait until I had a break in things until I applied it. Then around one hour before, I saw the red exclamation mark on the HP Support Assistant in the taskbar. Open it, there was an update of the available BIOS, so I decided to let him do. At this point, no indication that it was the F.60 update.

  I hate doing these updates that work at the machine code level where if things go wrong, they can go horribly wrong.

  Well, everything went well. Updated the BIOS and restart the computer. I went back in to the support assistant and got the information on the computer, and he says that it is now the F.60 version. If she went from F.43 to F.60

  I power it off, wait a minute, then restarted with everything plugged in and it worked correctly.

  Thanks again for your help.

• FireWire devices are most recognized. External hard drive and the camcorder will not connect.

  My computer no longer recognizes the firewire devices that I connect to it.  The Device Manager shows the driver 1394 work very well.  I even deleted and reinstalled Windows XP.  My external hard drive so my camcorder are more recognized when I plug them cold or hot plug.  Two of them have worked very well for more than 4 years and now for some unknown reason, that they stopped just recognized.

  How can I get Windows XP to see again them?   I've tried everything.

  Hello Stevec5375.

  See the link below.  There is a fix for those running XP with multiple Firewire devices, thus causing a problem.

  http://support.Microsoft.com/kb/830987/en-us

  Please let us know if it did or did not help to solve your problem.

  See you soon

• My usb ports are not recognized usb storage damage

  Original title: why is my labtop port shows usb not recognized by vista home basic even though it shows a device installed and ready to use software?

  My usb ports are not recognized usb storage damage

  Hello

  · Do you think any yellow exclamation point inDevice Manager under USB devices?

  Windows vista contains several troubleshooting programs can automatically fix some common problems with your computer. One of them is the hardware and peripheral troubleshooting tool. I suggest you to run the troubleshooter as the first step in troubleshooting.

  Method 1:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2: Remove and reinstall USB controllers

  a. Click Start; in the start search type devmgmt.msc and press ENTER.

  b. expand Bus USB controllers.

  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  d. restart the computer, and then Windows will reinstall the USB controllers.

  e. plug the removable USB storage device and test to make sure that

• dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES

  Original title:

  dkafox1 lost all THE WINDOWS updates that THEY ARE NOT INSTALLED UPDATES, more problems with windows update. May HAVE a PROBLEM WITH REGISTRATION BUT DO KNOW NOT if this msi I HAVE HELPED.

  I have windows 7 x 64 Version 6.1.7600.16385. My windows update has only downloaded and installed a fix (KB947821 on 22/03/14. In the event err log # 2147942487command line: "C\:WINDOWS\SYSTEM32\WUSA '". "»» "EXE" "Windows Update Troubleshooter said" search for missing or corrupted files. I did a sfc/scannow and everything was fine, that the settings are incorrect... Went to computer management by looking at the windows log. Event ID was found in respect of the implementation of 3. Looks like I've lost all my updates. Window update is only showing KB947821 HOT of difficulty. All my other downloading updates for the past two weeks included Microsoft Office Update that I can't see anything there all gone. I check the installed updates and 14 updates that don't settle all gone. Windows Update indicates any problem or error #. It says Windows update installed "Never". I tried the solution to the difficulty of corruption problems MSI software update registration. Help I don't know where to go from here. I ran the windows Memory Diagnostic tool, which came with no error. In the community he sent me to back registry which I do not know how to do. Can I save on my hard drive or another source. He says type reedit32.exe. I have the windows 7 registry editor wants me to save the registry key or subkey > I do not know what files to back up or export. I'm not computer savvy, but I do what I can do better. Had problems with windows update not install and now not download or install 2 MOS. So where and how can I know what updates I need after that this problem is corrected.  Thank you

  If you want Office 2007 updates to appear in the installed updates again, you would need to uninstall/reinstall Office 2007 and install all the updates again.

  Assuming that Office 2007 is installed & working properly and no update is offered when you run a manual check for updates now, you might want to leave enough alone (that is, do nothing) - then see if the 2 updates for Office 2007 SP3 be released next Tuesday (a) receive, (b) successfully install and (c) are listed in the installed updates later.

  PS: The possible causes of the problem are messing with registry cleaners, messing around with the Software Distribution folder, and the fact that it was a computer refurbished when you bought it.

• Is it possible to change the menu of windows update to the much more functional version?

  Is it possible to change the menu of windows update to the much more functional version? The change took place on 07/10/09 and made by selecting which updates to install more troublesome. * Note * I do without roll back Windows Update 7.4.7600.226 Agent that has been installed on 10/07/09.
  This change of format is also just change the switch on for windows 7?

  Hello

  Welcome to Microsoft Windows Vista community forums!

  I am sorry to say that there is no choice left out. You must perform a system restore or uninstall the manual update that is installed.

  Improvements made to the version of the Windows Update Agent 7.4.7600.226

  • Time sweep improved for Windows updates
  • Improved user interface for Windows Vista and Windows Server 2008 - based computers that are running Windows Update
  • More visible and detailed description of updates
  • Improvements in the way in which users are informed about service packs

  For more information, please see the link below:
   
  http://support.Microsoft.com/default.aspx/KB/946928

  Kind regards

  Savan - Microsoft technical support.