Seagate 2 TB usb hard drive are most recognized in xp pro

Similar Questions

• External hard drives are not recognized by Lr4

  When I plugged my two external hard drives to my computer this week, Lr4 does not recognize them. Each folder has a question mark by it.

  Appreciate any help... Thank you!

  Dave, none of us "aid" are employees of Adobe, we're all users just like you... it is a user forum where we all help each other.

  Return to the specifics of your problem, "eject" is a function, you should find the area of the Windows taskbar system tray, but you may need to click the little pointing up (marked in blue on the attached screenshot) arrow to 'show hidden icons', which will reveal a bunch of other icons and the one you need is marked in red. Click on that to reveal a list of devices that can be ejected, select the one you want and wait to be advised that it is safe to unplug.

  To be honest, I would never disconnect a drive just unplug him.

  Regarding your other external drives, like I said that Windows will assign the first available drive letter, unless you use the "edit the drive letter" option to assign a specific drive letter... in this case Windows will remember this assignment and will subsequently always use this letter provided it is available at the time of reconnection. In other Windows do not book the drive letter, but it will use it if it happens to be available.

  For this reason that I attributed to all drive letters my backup hard drives that I regularly remove after use, so I know I will always get the same letter each time (which is fundamental to my backup strategy).

• My external USB hard drive was not recognized. Difficulty?

  The subject line says all this.

  It is important that I have access to the XHDD. That I am I missing that will make this happen via a USB connection?

  Ok. When you connect your XHDD for the WinXP, you should be able to see it using the workstation.

  You should also see an icon and icons for your CD-ROM, disk, nextwork and speaker in the lower corner of the WS7 similar to the following.

  Right-click on the icon XHDD next to the "speaker" icon and select Connect (disconnect from the host) for you disconnect from your XHDD of the host (WinXP) and connet to the virtual machine (WS7). You can also right-click on the icon and disconnect (connect to the host) to return the XHDD to the WinXP.

  I hope this helps.

  -Allocation of points if you think it is 'Useful' or 'Correct '.

• Seagate hard drive external not recognized

  A few months ago, I bought a new computer with Windows 7 installed. I use a 1 TB Seagate external hard drive to back up. This worked perfectly for the first time, but has since has suddenly stopped working. While he worked, he always appeared in 'Computer' as the player 'I '. Now, when I plug into a USB Port, your hear connected used sound, but drive 'I' is no longer present. I also tried other brands of external drives, but none of them work! HOWEVER, if I plug what this either in the USB Port (MP3 player, iPod, USB stick, GPS etc.) they are all show like 'I' Drive and perfectlty work. I talked to the retailer, Seagate, and an Expert on the Radio Station on a show that deals with computer problems. Any suggestions I received, I tried, but nothing fixes the problem! I have since told me that this is a problem with Windows 7. Can someone help please before go me completely insane

  Hi ic1male-London,.

  You can run the fix it from the link below and check if this can help: hardware devices do not work or are not detected in Windows: http://support.microsoft.com/gp/hardware_device_problems

  Also try the steps in the link suggested by Seagate support below: Troubleshooting a Seagate or Maxtor external hard drive that is not found in Windows [194531]: http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=194531

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My files on the hard drive are getting corrupted?

  I use the model of MacBook Air 2013 Yosemite running. I have a Seagate BackPlus 1 TB drive to NTFS. And I use Tuxers NTFS on my Mac to read and write files from NTFS devices. Lately, I'm sloly from knowledge that my files on the hard drive are getting corrupted. When I try to open any folder I blocks until I have remove my hard drive. I lost some files like this. Now, they are completely inaccessilble. The big sone files show even ehen 0 bytes, they are around a GB or something. I start out freak because all my data is in this hard drive. 1 TB of data. Its my life is locked in it.

  Is someone can you please tell me what is happening with my hard drive?

  Thanks in advance...

  Is someone can you please tell me what is happening with my hard drive?

  Probably not. The problem you are experiencing is almost certainly that the drive itself has failed. It could have also been caused by third party software that you use to support a formatted NTFS volume. Isolate the cause to one or the other is probably not an effort worth it, because the files themselves are probably already damaged and unusable. In this case the only alternative to certain to succeed is to restore from a backup.

  As you know the Mac FAT32 and ExFAT supports and can read, but not write - formatted NTFS volume. For this reason, if you ask the Windows compatibility, you must select ExFAT.

  You could try using the third-party data recovery software, even if success is not guaranteed. I can offer no specific product recommendations.

• External USB HARD drive of GigaStore talk more to me

  Hello

  I am a user of the device Gigastore and have not been able to connect via the USB port of my laptop or desktop.

  The message informs that ther files are corrupt and that it cannot be read.
  He is a recent problem that everything was OK until Tuesday evening.

  Any ideas will be very greatly appreciated as my entire collection of are Mp3 files on the hard drive.

  I'll be able to recover the files?
  The files will still be on the disk drive?

  Ainsel UK

  Hello

  It is not easy to say what could be bad on the external HARD drive.
  You can try to connect the HARD disc to the desktop.
  Maybe the HARD drive can be recognized if you plug with the IDE cable.

  Sorry, I put t see any other possibility.

• Re: Which hard drive are built on the portable HARD drive

  Hello

  I am planing to buy a portable hard drives 2.5 ".
  I wonder what hard drives are built into these phones?

  Anyone know?
  BR Alex

  I presume that the commune 2.5 SATA HDD. But most of the time the drive HARD details are on the HARD disc enclosure

• Satellite L50 - keyboard and HARD drive are off services

  Hello

  Happy new year !

  I have a Satellite L50-A-1FQ (part. REF.: PSKK6E-04D08WSA)

  And it seems that the laptop have too much drinking during the day of the new year

  Keyboard, hard drive are off services and phones may be... 2 usb ports do not work...

  But the computer cannot start with an outer edge key and a new hard drive... under linux system

  Yes I know... I'm a geek

  So I come here just to know what is the part number of the part of the mother Board for this computer...

  I searched the internet without success. I found some similar pieces on ebay but not the exact model.

  Can someone help me? Thank you

  dismant your laptop and you can see the motherboard part number manufacturer and so on I found this link https://support.toshiba.com/repair it say and parts but I don't see option to check the part and to order

• diving USB hard drive appears on the Control Panel, but not on MY computer

  Drive hard USB part on the Contrlol Panel but not on my computer.

  Hi Frank,.

  Thanks for posting your query in Microsoft Community.

  If I understand you correctly, the external USB hard drive (HDD) appears in the control panel but does not seem to be detected in my computer screen. I will certainly help you to question, however, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  (a) what is the brand and model number. the USB HDD?

  (b) has detected before HARD drive in my computer screen? If so, did you do changes on the computer before this problem?

  (c) that you get an unrecognized USB device notification error message?

  The unit is probably go up at the same point one of the partitions and thus becoming "invisible". In

  in order to further diagnose the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows

  
  

  Also, run the next fixit to solve common problems with USB devices.

  Diagnose and automatically fix the Windows USB problems

  If the problem persists, try the following method.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and perform a test to ensure that the problem is solved

  Also, refer to:

  Updated a hardware driver that is not working properly

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Is it safe to remove a USB hard drive or flash drive when my PC is suspended?

  Suppose that I used my USB hard drive or flash drive.  Now suppose the PC goes to sleep or I deliberately suspended (after which the green light on my hard drive turns off).  Is it now OK to disconnect the device from the USB connection?  Or I have to wake up the PC and go through the procedure of "eject" explicit to remove safely?  You can assume that no files don't care don't is open for output on the disk when the suspension occurs.  (I can't represent some of the things that the OS can be done on a regular basis.)  I could in theory (and unintentionally) open a file media for playback and made a break at a time where the OS hangs.

  (I always assumed that, when you go to sleep, the BONE empty buffers and otherwise puts files in safe States, as it would have on explicit 'eject'.)  However, my research on this issue have never turned up an explicit answer, so I've always played it safe.  However, the scenario I describe is common for me, and it would be more convenient if the suspension is that it is safe.  It's a HTPC across the room, so suspend and then unplug is much easier that awaken (possibly), eject, get up, disconnect, go back, suspend and finally go away.  I wonder whenever I'm doing it the "hard".  "I want to know.)

  I doubt that the answer depends on the OS; but, if so, please say how it may be different, that I also have a desktop XP machine.

  No, put the computer to sleep does not these "flush" or "eject" actions. Files that are open and active are both suspended - that is, to remove all media while the computer sleeps is a risky operation.  You can, for example, to sleep or hibernate a computer in the middle of a software installation, it is clear at this point are activities that could cause more read/write operations once the computer wakes.

• VMHost and USB hard drive?

  Is it possible to setup a VMHost to access a USB hard drive? VMHost running ESXi 5.0.

  Still not clear as to why you need to do. It may be possible, but I don't think that's how VDP was intended to be used.

  Here are the steps you should try:

  • Mount the USB drive to the host and make sure that it is not 'automatically' for use by the VMs.
  • Locate the VMDK with backup files.
  • Determine the size of the VMDK.
  • Determine if there is enough space on the USB drive to the file system.
  • Create a VMFS5 file on the USB system.
  • If the USB and the VMDK are visible both from the vSphere client, copy the VMDK to the USB port.
  • If it is not visible from the customer vShpere, use the tools of command line (vmkfstools, CLI power) to copy or clone the VMDK on the USB.

  This seems too real similar work, isn't it?

  Given that the amount of disk space available for the device .5TB is 850 GB, it won't probably enough space on a USB drive, if you have been backing up virtual machines for any amount of time.  An SSD or a SATA hard drive would be more likely to have sufficient capacity.

  If you succeed to move the files to a USB/SSD/HD, what would be your next step?

  If you move the files, wouldn't be simpler to use Storage vMotion?

• 6.04 MB/s max on a USB hard drive

  I have a USB hard drive, I used for a backup. I use to be able to get 30-50MBps on it, but after that I reinstalled ESXI 4, I was able to get 6.04MBps MAX I tried different guests, different usb ports, nothing seams to help. Any ideas?

  Even if you could a USB key as data store, performance will be slow due the unique axis of key USB and PAHO are / s of SATA would also be very little.

  What a fight, creating an old server with openfiler and presenting as iSCSI?

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• How to change the icon of the USB hard drive?

  My external USB hard drives have this icon,

  http://photoserver.WS/images/N2684b7563a181ccc.PNG

  I guess because I deleted somehow autorun.inf file. I tried to change, guide following from this link

  http://www.astahost.com/info.php/change-drive-icons-labels_t7859.html

  but failed. Make a right click on the (H) does not give me the option to change the icon. How to change? Is it possible to do so directly, by selecting another one of shell32.dll, or more must do something with the registry?

  Also failed, recommendation with file autoran.inf

  [AutoRun]
  label = hard USB
  Icon = slick_hd_green.ico

  in accordance with the instructions of the

  http://www.WikiHow.com/change-the-icon-of-removable-drives

  In meentime, I changed his computer management Label, now it is hard USB and then noted:

  http://photoserver.WS/images/eYZB4b758eb2be362.PNG

  and here is happy about its autoran subfolder

  http://photoserver.WS/images/MRmz4b758eb2c5113.PNG

  What should do?

  And another question: what is the best (small) software to create data photos icons?

  Hello

  Your ad is a bit confusing
  Which external HARD drive, you have exactly?

  I know for readers of the icon can be changed in the Windows registry but is it really so important? I doubt that

• What hard drives are compatible for a Satellite L300-1AP?

  My HARD drive is somehow broken :( What hard drives are compatible for a Satellite L300-1AP so that I can something eBay?

  Thank you.

  Hello

  Satellite L300 supports SATA HDD!
  SATA controller having no physical limit, you should be able to use any HARD drive 2.5 SATA. So, for example, a 500 GB 2.5 SATA 5400 RPM HARD drive should be compatible.

  Welcome them

• Connect to airport extreme USB hard drive

  I have a drive external hard Iomega LDHD-UP that I want to connect to my Airport Extreme (running the 7.6.4)... version but I can't seem to do.)

  Currently, the airport is set up as a bridge to my Verizon Fios router.  It all works very well.

  The instructions from Apple don't seem to help me, because I do not have "Airport disk utility" - only "Airport utility" - and I'm hit a roadblock there.
  (Airport: how to mount a volume of Airport Extreme USB hard drive in Mac OS X and Windows - Apple Support)

  Normally, I can understand something like this, I thought I would ask for help rather than making circles for another hour.

  Any advice?  Thank you.

  OK, so I read all the info in this article,where to get the Airport disk utility >

  ... and I now know that 'The airport disk utility' is no longer (and does not have the article I cited above), but I'm not even see my drive hard when it is connected to the Airport Extreme.