External hard drive inaccessible PX1269E - 1 50

Hi all

I hope that you may be able to shed light on the functioning of the curious of my PX1269E - 1 50 external hard drive (500 GB). Up until recently, the drive works perfectly.

The malfunction is the following: the hard drive is recognized by Windows XP SP2 when I connect it by USB, causing the virtual CD-ROM drive - one that is related to the protection of password from this particular type of external hard drive - for pop - up. In addition, the item "Toshiba USB 2.0 Ext. HDD USB Device" appears in the list of hardware in the Windows Device Manager. Unfortunately, this virtual disk contains no data, saying: 'Please insert a disk in the L: drive' and not (as he did before this curious malfunction) give me the chance to type the password to activate the actual data partition.

In short, even if windows recognizes the hard drive, even a virtual CD installation for her, the real data drive never appears, nor make any other sign of life from the hard drive. My best guess at what caused this dysfunction is as follows:
1. the disk password protection is turned on
2. I converted his original FAT32 to NTFS disk; the drive still worked after conversion
3. a week later, I have once again turned on the unit and activated the device with the password
4. I started to copy some files. After a couple of files, Windows has returned an error "delayed write".
5. After this error report, the hard drive is the comatose state described previously entered

Do you have a suggestion or an idea of what could yet give me access to the disk?

Thanks in advance for any information or idea is welcome! Best,
Bonkie

Post edited by: Bonkie

I still don't know what exactly was wrong. However, I found a great tool to remove the virtual CD that is responsible for the protection of password, which proved to solve the problem. The disadvantage is that this method kills also all data: s. tool "CD to drive HARD Convertor", specific for discs with password proetection Toshiba, can be found here:
PCID = 8 http://www.techsupportlive.com/index.php?_m=downloads&_A=view&parentcategoryid=9& & nav = 0, 8

As a side on the PX1269E - 1 50 disc note: I can't say I'm really happy with this type of hardware failure. A hard drive that dies just is unfortunate, but understandable. However, a software defect in password protection that disables the disk is rather sloppy and shouldn't be possible.

Tags: Toshiba

Similar Questions

  • Refusal of the WORKSTATION to access external hard drive window

    Hello

    I can't access an external hard drive (WD My Book Home Edition). The problem happened when I disconnected my external drive from my Win XP Pro computer and plugged into another Win XP Home computer that had another WD external drive attached to it. Both my drive ext as wel as the other disk ext became inaccessible. I disconnected my 2nd computer ext drive and connected to computer Win XP pro that I always use. However even though my computer recognizes the drive I have noticed that the icon WD changed to a regular folder icon and whenever I try to open it, it says drive H is inaccessible. I also noticed that the folder icon was the same as the 2nd ext drive connected to the computer Win XP Home. I tried the microsoft bulletin:
    "This article describes how to capture a file or folder to which you are denied.
    I décliqués the "simplified" sharing and set permissions on a shared folder. "" After that it gives information about the ownership of the folder as follows:
    To take ownership of a folder, follow these steps: right - click the folder you want to take control and then click Properties.
    1. Click on the Security tab, and then click OK in the security message (if one appears).
    2. Click Advanced, and then click the owner tab.
    3. In the name list, click on your user name , or click on administrator , if you are logged in as administrator, or click the Administrators group. If you want to take ownership of the contents of the folder, select the check box Replace owner of subcontainers and objects.
    4. Click OKand then click Yes when you receive the following message is displayed:
      You are not allowed to read the contents of the directory folder name . Do you want to replace the the directory permissions with permissions granting you full control?

      All permissions will be replaced if you click Yes.

      Note folder name is the name of the folder you want to take charge.

    5. Click OK, and then reapply the permissions and security settings that you want for the folder and its contents.
    I can not follow these directions as I do not have a visible security tab. I was able to save things to my ext drive but cannot access it from the my computer window. I am therefore able to see the contents of the disc in the 'SAVE AS' window. Given that I'm not very good at the computer stuff can someone give me step by step instructions on how to access my drive hard Ext. window "WORKSTATION". Thank you in advance.
    Soleil2012

    Harman salvation,

    Requested information:

    http://support.Microsoft.com/kb/308421

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When I deleted a picture of my MacBook, why it also remove the external hard drive?

    So I tried to help my wife to free up space on his MacBook Pro by putting all of his photos on an external hard drive. After iPhoto slide the hard disk and wait 40 minutes so that he could transfer, I wanted to make sure it worked. I ejected the disk and then plugged in. Of course, all iphotos were still there. Just to be sure, I deleted one file in the folder on the computer's iphoto. I went to my shock and horror, the external hard drive, that it has been deleted it too! How is that possible? I've been scouring the Internet trying to retrieve this file with no luck. It was not in the trash. There is a tab "recently deleted". Time machine was not turned on. iCloud shows nothing. I can't download any software, because the computer is completely filled. How is it possible that by deleting this folder on the computer he did also leave the hard drive? AND it has not been saved in the trash? I have used PC, and whenever I need something in return, he was ALWAYS in the trash. And if I deleted something on the computer with an external hard drive connected, it would NEVER be removed from the external hard drive at the same time. I'm so frustrated and feeling SO bad that I deleted a folder with important pictures of our kids. Is that what I can do to recover the pictures? Any help is greatly appreciated.

    You used Time Machine at all? I see you say it was not on, but it never on and is at - it a backup Time Machine on the Macbook Pro?

  • Seagate external hard drive / / no display

    Recently I bought a Portable Seagate 2 TB external hard drive for my MacBook Air. I put all my movies, music, ext documents on my hard drive with my important homework. The reason why I did was reset my mac, then return all my old documents, photos ext, back to their place of origin. I have managed to do and frees a lot of space. A few days after my MacBook fell asleep with a connected external hard drive and now the hard drive is no longer present on the desktop or in finder. I am able to find in my "disk utility" , but for some reason, it shows the hard drive passed out faded gray and full? I tried to hook up with different cables and on the various devices as well. Also sang the first aid option in "disk utility" with no other results. I have contacted apple support and found out it was the external hard drive with the problem, so they couldn't help me. They then redirected me to Seagate Support, and I had already tried the methods they gave me (see list above). I was wondering if anyone here on communities of Apple has experienced the same problem as me, it would be that much appreciated advice you may have. I have important files that I need to recover.

    Help, please!

    Had a similar problem with external hard drive WD also on model MBA early 2015. Found if I disconnect the external hard drive restart MBA and then reconnect the external hard drive it was working normally again.

    Another thing I tried was still unplug HD plugin MBA on sector and re - a SMC.

  • MacBook Pro not mounting external hard drive

    My Macbook Pro (early 2015, running Mac OS Sierra) is not able to mount my [new] external hard drive (Seagate Backup Slim). It shows up in disk utility, but the volume seems shady. Nothing happens by pressing the command mount or performing first aid. Kindly help me out here.

    Hi vishesh97,

    Welcome to the communities of Apple Support!

    We understand your question that you have a new external hard drive, a backup Slim Seagate, which does not appear when you connect to your MacBook Pro.

    Allows because it is a new hard drive, try to clear the disc first and formatting for Mac OS extended (journaled). The instructions for this process are found in the article below:

    For Mac disk utility: delete a volume using disk utility

    See you soon!

  • How to recover data from my macbook pro drive to an external hard drive?

    My Mac pro does not work. Is it possible to back up my data through safe mode? Problem is that I accidentally deleted my last backup in my external hard drive. I'm just trying to retrieve photos and videos.

    Perhaps. What happens when you start up the Mac normally?

    You have another Mac?

    This Mac starts to recover? (need of Lion or later)?

    What version of Mac and Mac OS model?

  • How can I uninstall Sierra & return to El Capitan without an external hard drive or equivalent required by the instructions online?

    How can I uninstall Sierra & return to El Capitan without an external hard drive or equivalent required by the instructions online? I find too many misadventures and not happy.

    Hello

    Check out this useful tutorial: https://www.igeeksblog.com/how-to-downgrade-macos-sierra-to-mac-os-x-el-capitan/

  • Mini Mac server - attachment of external hard drives file transfer speed

    Hi guys!

    I wanted to increase the speed and storage capacity to transfer to my Mac mini file, so I bought a box of external hard drives. The one I bought is: http://www.icydock.com/goods.php?id=219

    Built-in the Mac mini hard drives transfer the file to 60 MB/s (writing and reading) and I wanted to get better speed of file transfer, so I bought an SSD that is going to be inside with an another HARD drive of 3 TB for archiving my files. The housing is connected by USB3.0 (5 Gb/s) for the Mac mini.

    [SSD-> files I opened every day] - speed around 550 MB/s write and 500 MB/sec in reading

    [HDD-> Archives, files that I have does not open very often] - speed around 150 MB/s write and 150 MB/sec in reading

    So I did some benchmarks on my new Setup, and the speed is not really what I expected. Transfer of file max speed I have achieved is about 100 MB/sec in writing on the external SSD plugged into the mac mini. This transfer has been filed since an iMac 21 "2011 with an SSD (with almost the same speed read/write than the box) so it's quite disappointing.

    It is possible that the Mac has a 'file transfer speed limit' is somewhere? Or whatever else that could affect that?

    More information on my setup:

    Mac Mini server 2012 - 2 TB RAID 1 - Mac OSX 10.9.5

    iMac 21 "2011 - Crucial SSD 275 Gb - Mac OSX 10.9.4

    IcyDock external enclosure - 4 bays, USB3 5 Gb/s

    -Red WD HDD 3To

    -Crucial SSD 1 TB

    Together internal Gigabit Ethernet network

    Thank you!

    Was perhaps Spotlight indexing external at the same time, the test has been done?

  • Problem of macOS / external hard drive

    My external hard drive (Seagate Portable) went wonky after update of my MacBook Pro for macOS Sierra.

    I did some research and I've followed all the advice - nothing helped.

    ・It is not in the Finder.

    ・It is listed in "Disk utility", but I can't do anything with him - like mounting the drive.

    ・ "Disk utility", says that the Seagate drive is completely full - but I know for sure that's not true - it was about a quarter full and has only a few months.

    ・i reset the PRAM & SMC on Mac

    Try to update the Paragon NTFS driver. You can find the updated version on the Seagate support site at:

    LUs-desk/NTFS-driver-for-Mac-OS-master-DL/ http://www.Seagate.com/support/External-Hard-Drives/Desktop-Hard-Drives/Backup-p

  • Using an external hard drive to my itunes library?

    Here's my problem...  I just got a new laptop with a disc ssd 256 GB, my itunes library is well over 150 GB.  I don't want to take the majority of my hard drive to my itunes library, so I want to keep the library on my external hard drive, music via itunes on my laptop without copying it to the wire to the laptop HD.

    Is this possible?

    I went into preferences / advanced and changed the itunes media folder location to the file path for the external HD and it did not work.

    Any other suggestions?

    Thank you

    -C

    Launch iTunes with the SHIFT key is pressed, choose Create Library and specify a location on the external hard drive.

    (144962)

  • External hard drive Seagate

    Since the upgrade to Sierra, my Macbook will not recognize when my external 4 TB of Seagate hard drive is connected (no problems before the upgrade).  Another problem is that when I click on the Finder icon in the tray, opens a finder window, then whole screen turns black momentarily, then returns to the top with all the icons, but the finder window is now gone.

    You must update the Paragon NTFS driver. You can find the updated version on the Seagate support site at:

    LUs-desk/NTFS-driver-for-Mac-OS-master-DL/ http://www.Seagate.com/support/External-Hard-Drives/Desktop-Hard-Drives/Backup-p

  • No access to an external hard drive

    So I plugged my external hard drive in my macbook to move some files on it but it says "the disk you inserted is not readable by this computer." I clicked on initialize and he said: the hard drive is uninitalised and Mont and partition are grayed out. I ran the option of first aid, but he only said: the operation completed successfully. I am aware of that my external hard drive works because it is blue is lit and I used it a few days ago and it worked fine. I also plugged into another usb key I have and it works perfectly.

    Is there anyway for me to access my files on the external hard drive? I really don't want to lose my photos and files!

    The external hard drive is a tough drive 320 freecom.

    the light means power can get to the case, not the drive past any integrity checking. If the drive is older it may break or it could have been failure, or requires 3rd party software to allow full access, if it is NTFS formatted for windows and you use it on a mac.

    If you do not backup your data may be missing. If you start the boot disk process, you have already started to remove the files and more you try using that drive less whatever it is (if any) can be recovered.

    Freecom offers guarantees of 3 years on their mechanical hard drives but offers no guarantee with recovery of lost data (no company only)

    http://www.Freecom.com/warranty

    If your player is longer than 3 years its not rare that its failure and should be replaced with a new unit.

    In the meantime, you can try a 3rd party solution such as Disk Warrior or rescue for Mac to see if something can be saved, but still no service company forensic or data will always claim that they can do it with any degree of certainty to recover your data.

  • External hard drive will not mount after the update of the Sierra

    Hi, I have an a Segate 1 TB external hard drive that I have with my MacBook Air. After upgrading to Mac OS Sierra, he refused to climb and is therefore invisible in the Finder. Disk utility detects the drive in NTFS initialized and said that all the space has been used. I tried to mount it first through disk utility, but it did nothing. Then I tried via terminal, but he returns "failed to mount. It worked fine before and also works very well on a MacBook Pro running Yosemite. It may be nothing to do with the player, as all files are intact when it is connected to the other Mac. Also, I restarted in Mac utilities and run from there disk utility, and it detected the drive, mounted and fully initialized, with the right amount of space being exhausted.

    I am looking for a solution that does not copy the files off and reformatting if possible, but I'll give it a go, if it comes to that. Thank you very much.

    Most likely your Seagate drivers are not updated.

    NTFS is most likely the culprit here.

    Go to the Seagate site and download and install the latest drivers for your drive and NTFS.

    You can start here... http://knowledge.seagate.com/articles/en_US/FAQ/007770en?language=en_US & key = ka03 A000000tzbeQAA & k = n & wwwlocale = en - us

    Hope this helps, Greg

  • Can I use time capsule as external hard drive?

    Can I use time capsule as external hard drive so that I can access a file or a specific folder by searching for its name?

    A TC is now and for always player network... no external. So there are limits to its use.

    If you are multitasking your TC with Time Machine and then using a DMG file as a virtual drive is better than directly copy files... However sharing becomes impossible. One person at a time can open the DMG.

    See pondini. T3 http://pondini.org/TM/Time_Capsule.html

    Old but still interesting to read.

    You can certainly create a folder on the TC and copy your files on it, and then perform a search. Research is slow on wireless is so the speed of transfer of large files. With the help of ethernet is certainly encouraged to desktop computers.

    Sharing folders on the TC is also now more difficult with increasing security at El Capo and OS later. You do not create on the computer records are not available. And even the ones you create can occasionally and autonomous change permissions (since the TC controls drive not the computer), you lock your own files on... I answer these questions once a week.

    Not all software on Mac supports using network drives. The most difficult is photos that can corrupt the library due to disconnections... which are the most common wireless. Be warned backups are important and not easy to do because of the slowness of the USB port on the TC and you end up really need to another location on the network for backup on.

    Generally, I advise the people not not to use the TC for direct files... That is to say, if you edit a document, make sure that it is on a local drive... When you have finished the document, you can copy it to the network drive and delete the local version. Easy for... not so easy documents for photos with major libraries.

    A TC cannot save itself and Time Machine backup impossible network drives... This means that no backup will be your files in the TC, unless you take the initiative and do it.

  • Question: How can I format an external hard drive

    I am trying to use an external hard drive with Time Machine.  He tells me that my external must be formatted in a format "journaled". I can't find any way to do it and the Mac is do not do it either. Can someone tell me how to proceed so that Time Machine works to put in shape?

    If Time Machine is not reformat the disk itself, choose Utilities in the Finder Go menu, open disk utility, select the drive in the sidebar and delete it.

    (144913)

Maybe you are looking for

  • Unable to restore my laptop to factory settings?

    How can I restore to the factory settings when I tried the zero and F12 button and they do not work?

  • Cache directory structure

    I clear my Cache on a regular basis (at EACH stop, at least). I know and use the "browser.cache.disk.parent_directory" Cache location setting Is there a setting to return to the 3.6 Cache Directory structure? I feel no questions slowing down access t

  • Build digital signals

    Hey guys,. I need to duplicate a digital analog waveform.   Can someone show me a quick way to change my current VI for gen the same signal than digital? Thank you Zach

  • igfxext.exe on my laptop eee 900 ha

    don't know r got it but this message to the top and now I can't use my external monitor

  • WRT160N V3 not working properly

    First of all, it doesn't have anything that either allow you to connect to the internet, no PC, no wii, ipod etc. Then, when I used a network magic automatically fix it, fixed it, but it is said that we are "off the primary grid" and on someone elses