external hardrive recognize me as the owner, but don't give me any permissions

Similar Questions

• I bought the iphone 6 to find her icloud is locked. I tried to contact the owner, but I can't reach him. are there opportunities to take the step of activation? Thank you.

  I bought the iphone 6 to find her icloud is locked. I tried to contact the owner, but I can't reach him. are there opportunities to take the step of activation? Thank you.

  Hello

  You describe Activation Lock, which prevents the unauthorized use of the iPhone if it is lost or stolen.

  This can be disabled either by:

  • The former owner, grabbing their Apple ID and password of the device.
  • The previous owner, removing the iPhone in their list of devices to locate my iPhone via iCloud.com.

  In both cases, be sure to follow the instructions in the first article below.

  If you can not organize or either of these actions, then you will not be able to use the iPhone. There is no way around this security feature.

  More information and instructions:

  Turn off find my iPhone Activation Lock - Apple Support

  Find my iPhone Activation Lock - Apple Support

• I found iphone locked by owner for a long time in Europe and I need to contact the owner, but I was able to reach him?

  I found iPhone locked by owner for a long time in Europe and I need to contact the owner, but I was able to reach him?

  Return it to the police.

• I understood the problem, but don't know how to fix it. It is said to run dxdiag because of the direct 3D, so I run dxdiag and it finishes loading, I test direct 3D and it works very well...

  I understood the problem, but don't know how to fix it. It is said to run dxdiag because direct 3D, so i run dxdiag and it finishes loading, I test direct 3D and it works fine, so I re-run halo, but then it still doesn't work. so I went online for patches, but when I downloaded a patch for windows 7, but I have windows xp. so I go back to the internet and search for patches for windows xp, but there is no result. so I thought change to windowed mode halo would work but it dident work when I ran halo 3rd becose my color depth is low, I have 24-bit color quality, but I don't know how to change, so I look for a way to change this for months and no results.so to microsoft answers site please help me because I have nothing else in my mind to the difficulty of halo

  I have:
  (1.halo of the trial
  (custom edition 2.halo (full)
  Halo is ever going to work on my computer
  because he never did
  I play with my cousins that I visit about 3 times a year

  Hello

  I suggest you go through the link.

  Minimum system requirements for Halo: Combat Evolved
  http://support.Microsoft.com/kb/829479

  Please check if the computer meets the minimum system requirements to play HALO game
   
  You can also refer to:
  http://support.Microsoft.com/kb/829478

• my store is not act immediately after I had to repair in order to open a session, I know there is a command, I can use to fix the store but don't remember. can anyone help?

  my store is not act immediately after I had to repair in order to open a session, I know there is a command, I can use to fix the store but don't remember. can anyone help?

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your original thread...

  I had a virus that forced me to the factory reset, but now I can't update anything, error 0 x 80070057 I get n missing or corrupted registry. . troubleshooting of said Windows upgrade fixed it but the same thing happens...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-update/that-forced-me-to-factory-reset-but-now-i-cant-do/11a02043-468B-4D6F-8c9d-d82a2868685d

  Thank you.

• System Recovery Options - no operating system listed, need to load the drivers, but don't know where to find this (Windows Vista 64-bit)

  It is a gateway M6866 laptop running Windows Vista 64-bit.

  The computer does not start up--gives "BOOTMRG is missing" error at startup.  I'm trying to boot from the 64-bit of Windows Vista recovery disc.  I clicked on the "repair your computer" option, and it shows the computer loading files.  Then the "System Recovery Options" box appears and asks me to select the operating system to fix it.  The problem is that nothing has listed.  It is said that if your OS is not listed click Load Drivers.  I did, but it is said to insert the device installation media, and then click OK to select the driver.  I clicked on OK and then opens a browser window to select the file.

  I don't know which file I'm supposed to select here.  I searched online for an answer, and someone told him to go to the computer manufacturer's website and download the driver for RAID controller.  I tried to go to the site of the bridge to find it, but it doesn't seem to be one for Vista 64-bit.

  Please please help!  I have to at least be able to extract the files to the hard drive before reinstalling windows.

  Hello

  ·        Have you Configure RAID on the system?

  If you have not configured then RAID on the system, I suggest you to disable the RAID/eSATA (SATA improved) in the BIOS. Once you turn off the RAID/eSATA on the system that your basic hard disk should be recognized by the system because it doesn't require any drivers, it will act as an IDE. Once you have disabled the RAID/eSATA then booting into the recovery environment and build the Bootrec and check if the problem is resolved. I suggest you follow the steps mentioned below to rebuild the bootrec.

  Rebuild the BCD store by using the Bootrec.exe tool in the Windows recovery environment. To do this, follow these steps:

  a. get the Vista installation DVD and pop in your drive.

  b. then restart your computer.

  c. press a key when you are prompted.

  d. Select a language, a time, a currency, and a keyboard or another input method, and then hitNext

  e. click on repair your computer

  f. click the operating system you want to repair, and then click Next

  g. in the System Recovery Options dialog box, click command prompt

  h. type bootrec /rebuildbcd and then press the Enter"" key.

  ·        If Bootrec runs successfully, it will present you with the installation of a Windows directory path. To add the entry in the BCD store, type Yes. A confirmation message appears that indicates the entry has been added successfully.

  ·        If Bootrec cannot findany lack of facilities of Windows, you must remove the BCD store, and then you must re-create it. To do this, type the following commands in the order shown below: (remember to press ENTER after each command)
  bcdedit/export C:\BCD_Backup
  Ren c:\boot\bcd BCD.old
  Bootrec /rebuildbcd

  i. restart the computer.

  For more information, see the article mentioned below.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Calc want to work "behind the scenes, but don't not to appear in the query.

  Hello world
  
  Hope all is welll...
  
  I have a called calc: Calc_HippaToSortNumber who:
  DECODE (hold desc, 'HIPAA', 999, NULL, 0, 500)
  
  I use it in a condition:
  Calc_HippaToSortNumber = Calc_MaxHoldDesc
  
  I would like to remove the column from the query, but it is still active, get this msg when I try to
  Remove the column:
  ambigously defined column
  
  Any ideas how I can remove from query, but still keep the calc active?
  TX, Sandra

  Hello

  I just wanted to try the Calc_MaxHoldDesc calculation

  MAX (DECODE (hold desc, 'HIPAA', 999, NULL, 0, 500)) OVER (PARTITION BY Student.Id)

  While there is no reference for the calculation of the others.

  Rod West

• all my icons have moved from the bottom of the screen to the right, I would put them on the bottom, but don't know how to do, thank you very much

  all my icons left the bottom of the screen to the right side, I must have clicked bad some were, I'd be very happy of have moved them to the bottom of my screen.

  any help would be appreciated

  Right click, click on the taskbar and make sure that there is no check mark in the box "lock the taskbar" then left click on the taskbar and just drag it to the bottom of the screen. Put a check mark in the box "lock taskbar.

• Vista has decided to not recognize USB devices... have updated the drivers but no joy... any ideas pls?

  None of the packard bell 32-bit USB ports does not work... so cannot play games or download files from phones to the computer.

  Hi tony eden,.

  I suggest that you try the methods mentioned below and check if that helps.

  Method 1: Uninstall and reinstall the USB controller

  (a) click Start, type devmgmt.msc in the start search box, and then click Enter. Device Manager opens.

  (b) expand Bus USB controllers.

  (c) right-click the first USB controller under Bus USB controllers and then click on uninstall to remove it.

  (d) repeat for each controller USB is listed under Bus USB controllers.

  (e) restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  Check the USB device to see if it works.

  Method 2: Follow the steps in the section provided below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• When you try to connect to the XP user account, it starts to load then said end the session but don't connect

  When I try to log on my account, he begins to say load my settings personal, but immediately after it is said to end the session once your settings and brings me back to the same screen and I'm stuck. I tried to do this in safe mode and the same thing is happening even with the account admin I also tried using last good known Configuration and not luck. How can I fix it?

  Hey ashok patelTM,.

  1. you remember to make changes to the computer, after which the issue started?

  Try these steps and see if it helps:

  Step 1:

  Unplug all devices (except keyboard and mouse) external connected to the computer and then try to boot to the desktop and check if it helps. Let us know the results.

  Step 2:

  Try the steps from the link to the following article and see if it helps:

  How do I recover from a corrupted registry that prevents Windows XP startup

  I hope this helps.

• Strange appearance of page in the plan, but don't view affects not display them in the phone.

  I did something that changed the appearance of a page in the plan view, but which does not affect site seen in preview, or when you access it by phone.  The page has acquired a muddy gray overall tint with a white corner triangle top right - and I don't know why or how restore her normal appearance!  I had previously downloaded from this site on BusinessCatalyst but thought that it was time to download it on my external provider - Vidahost.com

  I would be grateful if someone else has experienced.

  Either way, I would be grateful if someone should feel moved to give me their criticism on my first mobile site.

  Reference: http://www.bilyzcreative.UK

  The page is displayed in gray because export/publish has been disabled. Use the right click menu on the page or go to the Page Properties to turn it back on export.

• Want to use 3 G iPod in the car but don't charge via Firewire

  I have a 3G iPod that I would use in my car, but for some reason that I can only load using a charger that has a port Firewire output which then connects to a 30 pin adapter Firewire port. It is extremely heavy, and while I managed to get away with this arrangement in the House, I would like to use the iPod in my car, but about 6 or 8 different Chargers I tried working on three different iPhones and iPod 5G, none works with the 3G iPod - despite the specs mention it.

  There was no separate charger when I bought it and it has always been used with Firewire configuration except when I had it installed on a previous car with a Harman Kardon iDrive system, which I don't have.

  Surely, it should not be impossible to load a 3G iPod in a car. I would be grateful of any advice or tips.

  Nevermind, I just found out why it does not work - I knew not that there is a difference between the 30-pin 12v and 5v USB Firewire input. I had assumed that 30-pin, this could have been housed.

  I guess that manufacturers who claim that their Chargers work on iPod 3G simply do not know that either.

• How can I get Firefox to work when my laptop says I have access to the Internet, but don't be loading not my pages?

  I'm not very keen with the terminology of my computer, but I'll try to explain my situation better than I can.

  I think that the problem began with a recent trip where I went out of State and took my laptop, I had problems connecting to wifi it. I was originally a bridge between Ethernet and wifi connection I think (something I said should not be the problem) and I had to take off for my wifi to work and once I did that my wifi worked well there. Once I came home however, my computer connects to my wifi at home and say I have 'internet access' but does not load anything on Firefox or Internet Explorer. I have already tried to rebuild the bridge, restart my laptop and analyses of virus. I know that my Internet works so if someone could help understand me what needs to change in my settings, or whatever it is I would be very happy.

  Hi Marcos140,

  I'd like to help, but is very difficult to diagnose with so little information...

  Do you know why you need the bridge in the first place?

  Your laptop connects via a wired or wireless?

  Please try this:

  1. Click Start
  2. Type cmd
  3. Press on enter
  4. Opens a black box
  5. type ' ipconfig/all '.
  6. Screenshot of the output
  7. Type "ping google.com".
  8. Screenshot

  If you can post the output of these commands, that it will help you.

  Thank you
  Curtis

• Picture of Syning iMac then removal of the phone, but don't lose them iMac

  Hello!

  IM new in the world of the iMac, Ive always had Windows, so I'm kinda stuck.

  So my question is, I sync my photos on my computer but I want to remove more than half of my phone, without losing what I sync just above. On my other computer, I have always been able to create a new folder, add photos, then go delete happy on my phone. I can do the same thing?

  You can delete them after import only if you have not enabled iCloud photo library. If activate you, then remove an image anywhere remove it from everywhere. ICPL is a synchronization service.

  Photos user / help guide

  https://help.Apple.com/photos/Mac/1.0/?lang=en

  IVous has a very detailed and well illustrated article on iCloud photo library:

  http://www.IMore.com/how-use-icloud-photo-library-ultimate-guide

• I closed my Bookmarks Sidebar, but don't see now any function in the menu to get it back. I use 4.0.

  The vertical bar is one of the best features of Firefox, but because I use a netbook I sometimes need to close in order to show the complete Web page. The latest version of the browser had a 'view' drop-down list in which we could click and restore the sidebar - in 4.0, however, there is no "View" menu, and the various functions of bookmark address only the toolbar horizontally bookmark. How to restore the vertical sidebar?

  Press F10 or press and hold the Alt key to bring up the 'Menu Bar' temporarily.

  You can find a toolbar button to open the bookmarks bar in the palette of the toolbar and drag it on the tab bar or Navigation bar.

  Open the Customize via "view > toolbars > customize" or "Firefox > Options > toolbars."

  • http://KB.mozillazine.org/Toolbar_customization