Strange appearance of page in the plan, but don't view affects not display them in the phone.

Similar Questions

• Device HDD external Samsung install properly but don't S poster not in the workstation

  DEVICE SAMSUNG EXTERNAL HARD DRIVE INSTALL PROPERLY BUT DON'T S POSTER NOT IN THE WORKSTATION

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Please select your language from the drop-down list above pour post your question in the language of your choice. The forum you have a posted in EST for English only. If you can't find the desired above language, en charge options pour Additional international locations can be found later in the link below:

  http://support.Microsoft.com/common/international.aspx

  Your question about Samsung HDD external refers to material. Please repost in the Vista Hardware forum:

  http://answers.Microsoft.com/fr-FR/Windows/Forum/windows_vista-hardware?page=1&tab=all

  Mersi.

• I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.

  If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

• DEVICE SAMSUNG EXTERNAL HARD DRIVE INSTALL PROPERLY BUT DON'T S POSTER NOT IN THE WORKSTATION

  DEVICE HDD EXTERNAL 2.5 "HDD SATA SAMSUNG INSTALL PROPERLY BUT DON'T S POSTER NOT IN THE WORKSTATION

  Microsoft answers site provides support in English. The following Uniform Resource Locator (URL) will be low - you receive information appropriate for your set up support. Open the link and get your region from the drop-down list, and then click the arrow to continue.

  http://answers.Microsoft.com/fr-FR

• I have the trial version but my cloud libraries are not displayed. Is this a limitation of the trial version?

  I have the trial version but my cloud libraries are not displayed. Is this a limitation of the trial version?

  Hi Amy,

  Can you please let me know about the AI CC version on your machines?

  WIN: Menu I help > about Illustrator

  MAC: Menu of AI Illustrator > about Illustrator

  The library Panel is shipped in The AI CC 20141 release. If the AI CC version isn't AI CC 20141, that please update HAVE CC 2014 using the creative application of cloud (quit and relaunch the CC app).

  Thank you best regards &,.

  Rambour

• When I clicked on the notice to update Adobe Reader, an icon appears (a person on the phone) as did

  When I clicked on the view to update my Adobe rReader an icon appeared (a person on the phone) as did an ad for computer help AC.  Two of them are appearing everywhere.  And they are very undesirable, very irritating.  How can I get rid of them >

  They ARE NOT Adobe. You have been infected by malicious software. You should run a scan complete antivirus.

• BlackBerry smartphones can not make calls from the home page or the phone book.

  I've had my curve for several months now and the other day, that my most young got a hold of it... I don't know how they do it, but my children can do things with my phone and computers that I did not know they could do... In any case I tried to access my voicemail by organizing the 1 on the homepage and it took me to instead call log, so I tried to make a call from the phone book by selecting the name pressing on do it call button and no as soon as I actually had to go into the call log and manually type the number.

  My question is... What did do?  It is very aggravating and I would ask him, but he is two... I know he did not drop it or I would take it to a service provider.  All of the suggestions.

  Thank you

  If you go in your call log icon or by phone, click your menu button and go to Options. Then, go to the General Options. See if your the home screen dial is set to Yes.

  Also try to reset your device by removing the battery for 1 minute and replacig it to leave the unit restarts. Try it later

• Strange thing happens by adding the phone number

  Hi all

  I'm tring to add a phone number of the phone book.

  However, my application brings original request for telephone directory of the instrument. This is the normal behavior?

  I want to add in silence, and another thing is that when I click on trackweel on objectChoiceField, it brings also the device [honebook application.

  I used the trackwheelClick() action.

      public boolean trackwheelClick(int status, int time)
      {
          Contact contact=null;
          int type=0;
          Field leafField =  this.getLeafFieldWithFocus();
          try
          {
              BlackBerryContactList contactList =
                  (BlackBerryContactList)BlackBerryPIM.getInstance().openPIMList(PIM.CONTACT_LIST, PIM.READ_WRITE);
              PIMItem pimItem = contactList.choose();
              contact = (BlackBerryContact)pimItem;
  
          } catch (PIMException e)
          {
  
          }
          if (leafField == okBttn)
          {
              contact.addString(Contact.NAME_FAMILY, BlackBerryContact.NAME_FAMILY, givenName.getText());
              contact.addString(Contact.NAME_GIVEN, BlackBerryContact.NAME_GIVEN, familyName.getText());
              if (pChoice.getSelectedIndex()==0)
                  type = BlackBerryContact.ATTR_MOBILE;
              else if(pChoice.getSelectedIndex()==1)
                  type = BlackBerryContact.ATTR_WORK;
              else if(pChoice.getSelectedIndex()==2)
                  type = BlackBerryContact.ATTR_HOME;
              contact.addString(Contact.TEL,type, areaCode.getText() + phoneNum.getText());
              try
              {
                  contact.commit();
              } catch (PIMException e)
              {
  
              }
          }
          return false;
      }
  

  Please help me solve this problem.

  Thank you

  DK

  Please refer to the example here:

  How to-AddressBook access contacts
  Article number: DB-00147

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800363/How_To _...

• some sites ask me to rember the name of the newspaper. If I do not accept some of them keep the valid name and others do not display them more.

  On some website, I have to login. If I Iam asked to remember the name of this connection. If I agree, some of these sites do not come until the next time with my username, but others.
  I can't find where I have to make sure that all Web sites, if any, do not forget my user name and/or password.

  Do you hear the names and passwords in the password manager or do you mean that you are connected is no longer on to (remember to) Web sites after the closing and restarting Firefox?

  There is a difference between remembering the name and the password in the password manager and a check box "remember me" on a web page.
  
  The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and which is sent to the server.
  
  If that "remember me" cookie is deleted or is corrupted or is not send to the server, then the server remember that you and you must connect once again.

  • http://KB.mozillazine.org/cookies
  • http://KB.mozillazine.org/Password_Manager
  • http://KB.mozillazine.org/User_name_and_password_not_remembered
  • https://support.Mozilla.org/KB/make-Firefox-remember-usernames-and-passwords

• MAF List view does not display an arrow at the far right image

  Hello

  I was working with the list of CRG Oracle view to create a page of the AMX.

  When I was with to create ListView data control, this isn't the display ar the right end of the list of the arrow.

  I have used showLinkIcon = 'true' also to display the link icon, but does not display is not the icon.

  Here's my AMX page for reference.

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < amx:view xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "xmlns:amx =" " http://xmlns.Oracle.com/ADF/MF/AMX "" "

  ' xmlns:dvtm = ' http://xmlns.Oracle.com/ADF/MF/AMX/DVT "> "

  < amx:panelPage id = "pp1" >

  < amx:facet name = "header" >

  < amx:outputText value = "List of reports" id = "ot1" rendering = "true"

  inlineStyle = "color: Navy;" text-align: center; make-weight: bold; "/ >

  < / amx:facet >

  < amx:tableLayout id = 'tl2' width = '100% ' inlineStyle = ' color: ActiveCaption; "borderWidth ="0">

  < amx:rowLayout id = "rl3" >

  < amx:cellFormat id = "cf4" width = "85%" >

  < amx:panelFormLayout id = "pfl2" >

  < amx:selectOneChoice value = "#{pageFlowScope.selected}" label = "#{' ' groups :'}" id = "soc1"}

  valueChangeListener = "#{pageFlowScope.ReportControlAction.onGroupChange} '"

  inlineStyle = "color: Black;" make-weight: bold; ">

  < amx:selectItems value = "#{bindings.groups.items}" id = "si1" / > "

  < / amx:selectOneChoice >

  < / amx:panelFormLayout >

  < / amx:cellFormat >

  < amx:cellFormat id = "cf5" width = "15%" >

  < amx:commandLink id = action = "#{"cl1"pageFlowScope.ReportControlAction.onClickOfGroupChange}" >

  < amx:image id = source="/Images/go.png"/ 'i1' >

  < / amx:commandLink >

  < / amx:cellFormat >

  < / amx:rowLayout >

  < / amx:tableLayout >

  < amx:listView styleClass = "listView-adfmf-insetList" var = "row" value = "#{bindings.reports1.collectionModel} '"

  fetchSize = "#{bindings.reports1.rangeSize} '"

  selectedRowKeys = "#{bindings.reports1.collectionModel.selectedRow} '"

  dividerAttribute selectionListener = "#{bindings.reports1.collectionModel.makeCurrent}" = "reportType" "

  dividerMode = 'all' showMoreStrategy = 'autoScroll' bufferStrategy = 'viewport' id = "lv2.

  collapsibleDividers = "true" showDividerCount = "true".

  inlineStyle = "vertical-align: middle;" color: gray; font-size: small; ">

  < amx:listItem id = action = "#{pageFlowScope.ReportControlAction.displaySelectOption"li2"} '"

  showLinkIcon = "true" >

  < amx:tableLayout width = '100 percent' id = 'tl1' borderWidth = "0" >

  < amx:rowLayout id = "rl2" >

  < amx:cellFormat width = '26px"rowSpan ="2"id ="cf1"halign ="center"valign ="middle">

  < amx:commandLink id = action = "#{"cl2"pageFlowScope.ReportControlAction.onClickOfPinReport}" >

  < amx:image id = "i2" source="/Images/pinandadd.png"/ >

  "< amx:setPropertyListener id = from =" #{row.name "spl1"} "to =" #{pageFlowScope.reportName} ".

  type = 'action' / >

  < amx:setPropertyListener id = from = "#{row.description"spl2"} '"

  to = "#{pageFlowScope.reportDescription}" type = "action" / > "

  < amx:setPropertyListener id = from = "#{row.id"spl3"} '"

  to = "#{pageFlowScope.selectedReportID}" type = "action" / > "

  < amx:setPropertyListener id = from = "#{row.isParameterized"spl4"} '"

  to = "#{pageFlowScope.isParameterizedReport}" type = "action" / > "

  < / amx:commandLink >

  < / amx:cellFormat >

  < amx:cellFormat height = "28px" id = "cf2" halign = "DΘmarrer" valign = "middle" >

  < amx:outputText value = "#{row.name}" id = "ot4" inlineStyle = "font-size: x-small; color: Navy; "/ >

  < / amx:cellFormat >

  < / amx:rowLayout >

  <!-< amx:rowLayout id = "rl1" >

  < amx:cellFormat width = '100% ' halign = "DΘmarrer" valign = "middle".

  inlineStyle = "text-align: left;" exceeding capacity-wrap: break-word; ">

  < amx:outputText value = "#{row.description}" id = "ot3" "

  inlineStyle = ' color: gray; " font-size: x-small; Police-weight: lighter; text-align: left; make-style: italic; "/ >

  < / amx:cellFormat >

  < / amx:rowLayout >->

  < / amx:tableLayout >

  "< amx:setPropertyListener id ="spl5"from =" #{row.name} "to =" #{pageFlowScope.reportName} "type ="action"/ >

  "< amx:setPropertyListener id = from =" #{row.description "spl6"} "to =" #{pageFlowScope.reportDescription} ".

  type = 'action' / >

  "< amx:setPropertyListener id = from =" #{row.id "spl7"} "to =" #{pageFlowScope.selectedReportID} ".

  type = 'action' / >

  < amx:setPropertyListener id = from = "#{row.isParameterized"spl8"} '"

  to = "#{pageFlowScope.isParameterizedReport}" type = "action" / > "

  < amx:actionListener id = "al1" type = "swipeLeft".

  Binding="#{pageFlowScope.ReportControlAction.onSwipeToPin}"/ >

  < / amx:listItem >

  < / amx:listView >

  < / amx:panelPage >

  < / amx:view >

  Can someone please help me to solve it.

  Thank you

  Ajoy Sinha

  According to the following thread: https://community.oracle.com/thread/3592578 ... On Android, it is normal that the arrow is excluded and available on iOS, to meet the relevant guides to style of the different platforms.

  CM.

• IPhone 6 battery but don't read do not zero percent

  My iPhone 6 is underway to due to the battery is exhausted, but the percentage of battery remaining display is not zero - usually in the range of 30 to 40%.

  I backed up and restored like new with iOS 9.2, but this did not improve the problem.  Is this a hardware problem, which needs a trip to an Apple store - or is there a software solution?

  If this was not the first time that the phone turns off at 30%, did you leave it up to 100% load without interrupting the charging process?

  If so and it is not chance the situation, get the battery checked by visiting an Apple store or Apple authorized service next to your site provider.

  This discussion could also be interesting: How to calibrate a battery iPhone?

• How can I get Firefox to work when my laptop says I have access to the Internet, but don't be loading not my pages?

  I'm not very keen with the terminology of my computer, but I'll try to explain my situation better than I can.

  I think that the problem began with a recent trip where I went out of State and took my laptop, I had problems connecting to wifi it. I was originally a bridge between Ethernet and wifi connection I think (something I said should not be the problem) and I had to take off for my wifi to work and once I did that my wifi worked well there. Once I came home however, my computer connects to my wifi at home and say I have 'internet access' but does not load anything on Firefox or Internet Explorer. I have already tried to rebuild the bridge, restart my laptop and analyses of virus. I know that my Internet works so if someone could help understand me what needs to change in my settings, or whatever it is I would be very happy.

  Hi Marcos140,

  I'd like to help, but is very difficult to diagnose with so little information...

  Do you know why you need the bridge in the first place?

  Your laptop connects via a wired or wireless?

  Please try this:

  1. Click Start
  2. Type cmd
  3. Press on enter
  4. Opens a black box
  5. type ' ipconfig/all '.
  6. Screenshot of the output
  7. Type "ping google.com".
  8. Screenshot

  If you can post the output of these commands, that it will help you.

  Thank you
  Curtis

• I'm trying to re - install my for windows vista 32 bit synaptics pointing device, but my device manager does not display any device and keeps bring up the keyboard to the screen as how to fix this?

  I tried to install a driver for it but I find only 64 and 86 bit drivers. Sometimes my keyboard is not typing all letters I am getting tye (type) or like this for example. Someone at - it help me fix this please. I really want to get this computer working again.

  Your keyboard might not be hitting the correct letters (typing lertters numbers) because your shift caps lock is enabled (the led is green), to disable it on a portable computer, press on the 'fn + caps lk' keys at the same time, the green light should turn off.

  Your system is 32-bit if you need marked x 86 driver (it's actually 32-bit, there is no system of 86 bit).

  For you On - Screen Keyboard, check if it is automatically configured to start whenever you open a session:

  Go to the Control Panel, easy access, less "explore all settings', click on 'Use the computer without a mouse or keyboard', click on the box in front of"Use on-screen Keyboard"to uncheck if its active.

• A windows 7 and my black computerwent and this message CRYPT32.dll.Was able to get Vesta. But don't let me not upgrading to windows7. Say the need for the task of updating and complete cancle

  I was told it was Eric microsoft or hp that's why I got the message from crypt32.dll who blacked out everything on my computer.so what I do now?

  Hello

  (1) what is the exact full error message?

  (2) at what stage of installation do you feel the issue?

  I suggest you to run the Windows 7 Upgrade Advisor, if you have not yet tried.

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  You can also see the following article which explains the upgrade from Windows Vista to Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

• Windows Media Center detects digital channels on the air, but will not display them.

  To Feb. 1. 2010 my Vista Media Center has changed.  For example 1081 channel is now displayed in 1221.  Other Canadian channels were similarly renumbered.  Guide listings are correct.  The digital signal strength is all green bars.  My TV captures this channel 8.1 very well using the same antenna.  Everything has been working great until this renumbering.  Now only 2 of my 6-channel OTA work!  I love my Media Center for its PVR and want to come back!

  Dave, Blaine, WA, 98230 zip

  Update.

  The downloaded guide information are preferable.  Channel 1081 revives 1081 (instead of 1221), and it works!

  To sum up - around February 1, information (channel numbers) for several digital stations guide live has changed, and he followed that I couldn't receive the channels despite all my efforts.  My viewing dropped 5 2 stations.  With the latest download of zip code 98230, I'm at 4.  Good.

  There are two problems.  Channel 1021 (CBUTDT) is always numbered in 1581.  Despite the green bars in the "force of the digital signal", there is no photo.  I added manually 1021 nothing helps.  The second problem is that channel KVOSDT 1121 is still called by the BBC-3 guide with no ads, and it is not possible to assign KVOS ads to this channel, which disables the recording.

  I have the Olympics in HD, and I'm very happy for that!

  Dave