External hyperlinks Muse does not work

Similar Questions

• I have published my muse built Business Catalyst site and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  I recently published my muse built the Business Catalyst site for preview and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  Hello Jimw93000314,

  Are you preview site in the edge browser? When you preview the page in the browser Muse create a local server to give you the preview in the browser. With the edge browser, there was a reported issue to access the local server.

  Please click the link below that shows the steps to enable the browser to edge.

  http://StackOverflow.com/questions/30334289/cant-open-localhost-in-Microsoft-edge-project-spartiate-dans-Windows-10-APER cu

  I'm sure this will help.

  Kind regards

  Vivek

• Cursor image muse does not work in Chrome or mobile

  Cursor image muse does not work in Chrome or mobile, but no problem for Firefox, IE and Safari

  You really want to know? Haha. Customer wanted to slide show 'stop' for a while and then start again. The easiest way for me to do is to add some regular black images at the end of the slide show. You will see that the first image shows also twice - he wanted a delay for the slide show to start at the same time as the song.

  But I solved the problem in the meantime anyway - photos were not optimized for web use. It worked perfectly for two years, so I don't understand why the sudden error. Anyway, I opened the photos in Photoshop and was saving for web use one by one. Not sure there is a faster way to do it, but it worked

  Thanks for the help anyway!

• Toshiba 1 TB external HARD drive does not work

  I have a 1 to external drive what cards via usb cable, Ive put a lot of multimedia files on it and have been using it without problems don't have nothing put on for a little while, went to look for some files off it and comes up with usb not recognized, put it in another computer and the light comes done hard disk a rattling for a few seconds then hummes just as if it turns While the light stays on and is not all pulse, on the computer, it emits a sound to say ive plugged the on the bottom, it says safely remove hardware.

  Ive tried on two computers when in my computer it does not record.

  PS im not the tool sharper in the hangar when it come to tech stuff.

  The same problem. I bought edition 2015 last fall. It has a power supply problem (electrical problems). I thought it's because of my laptop. He made her crazy, but SMART was ok. Yesterday, it makes noises again and now it does not work. I saw light blue and only a little sound of pcb as start start. I saw that head of player on the Board.
  It's really a defection from the factory.

• External hard drive does not work properly

  Hi all

  It is a slightly different external HARD drive problem.  I had my faithful media ATMT bin since my first laptop with XP (2003) and I bought it in 2005.  It's a little wobbly as the fan vibrates a lot, but this isn't a problem.  What is the problem, is that I have a windows machine 7 who thinks that drive a need to put in shape, but my previous laptop which has vista on it was absolutely no problem to read the files IN ALL and you can open one of them without a hitch.  I tried to run CHKDSK I:\I (it is labeled as the I drive :) and 7 claims that it is in the format RAW.  I had a look at CHKDSK on my old machine and it is in FAT32, I since changed it to NTFS, but seems to have no effect.  I also tried the hunting of the drivers for the external hard drive, but I come only through links to Amazon as these things are always available.

  I really need to access this drive on my current computer as the older one needs a considerable cooling method to make it work therefore the latest machine.  What I also don't understand, it's that it was working absolutely fine on this machine too until quite recently.  He worked on it that I need, but have not been accessed for a while and so solutions in this regard would be greatly appreciated.

  Thank you very much for your time.

  RM

  Your drive has reached its copy by date and it works on time taken (if he is stil)

  If this does not work on another PC then it's probably dead.

  You can try the utility disk SeaTools from Seagate to check and see if it can detect and report on the drive

• Site of muse does not work in Internet Explorer

  Please help. My site bjh.dadeschools.net does not work in Internet Explorer. It works with all other browsers but not IE. Please help with this question.

  No, just to take one or the other. I used the one that ends in IE = 10 and it worked for me, but when I have a few minutes, I'll try to use IE = Edge because I think it's the best way to go. But yes, you need to add it to each affected page unless there is a way that you can add it so that it applies to all the pages... I'm not familiar with the Muse enough to say if this is possible, flippant.

  But go ahead and test it like this...

  1. go to your homepage.

  2. click on Page in the menu bar.

  3. Select the Properties Page.

  4. go to the metadata tab.

  5. in the HTML code forsection, paste the following code:

  Save that and try to republish and test this homepage you have applied that change and see if it works now. If so, then go ahead and apply it on your other pages or try and find if there is a way to implement the HTML code forcode to all your pages (maybe a master page or something.) Let me know if it works for you or if you have any questions.

• automatic redirection of the shape of the muse does not work

  I built a landing page:

  Home - Zamenhof Hebrew to English

  After clicking on tho form button, it assumes that redirect you to the thanks.html page.

  instead of this, something is happening.

  the server guy said to set up a .htaccess file... (straight ye...)

  any idea?

  by why same files work well here:

  Home - Zamenhof Hebrew to English

  Please

  The link does not work when we can test the form, the last works as you mentioned.

  Please give the link to the page where the form is not redirect, it may be a redirection problem.

  Thank you

  Sanjit

• External sound card does not work correctly

  I have a Nimbus PC music that I used for a few years. I have 2 its external cards: my main unit, which is a Focusrite Scarlett 18i8 and the backup device Steinberg CI2.

  The two devices have been works fine with my PC for a long time, but this weekend my Scarlett has stopped working, and my CI2 works with an intermittent buzzing. The two appear as audio devices and I reinstalled the drivers, checked speakers etc. configurations. I also tried both devices with my laptop and both work just fine then the issue is definitely with my PC.

  This problem started after I changed my setup for all my devices on my desk to put on a free-standing shelf so I changed USB ports and moved my PC and audio devices.

  What is the best way to try to solve this problem?

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the model number of your computer?
  2. you made any hardware or software changes on your computer before the show?

  The problem may occur due to corrupted audio drivers or the settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the audio Troubleshooter and check.
  Reference:
  Open the troubleshooting of Audio playback
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• HARD drive external "this device does not work correctly"Code 10"

  Original title: it does not recognize the external HARD drive. (Convert HDD mobile external HARD drive)

  I have a Sata Drive en-plus close card I bought, I successfully installed the HARD drive and plugged (supposed to be taken & play), it does not recognize the HARD drive and I tried the computer management and replacement of INF. USB but still does not. Also, has problems. Drive HARD Toshiba satellite came 500 GB Fujitsu HDD.

  The point of this is to clean up the cause of the car, there an OPS on it, but I have not anymore!

  Need help please!

  Hello

  Method 1:

  See the link and check if it helps:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Method 2:

  Check the link and try to run the Microsoft Fix it:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• Animation imported to the Muse does not work

  Created an animation in Animate, imported in a Web of Muse site and charge of the whole shebang on my new Web site. The Web site appears in my browser, but there is a large gray area fat where the Animate thing is. Says "we're sorry, this content requires Flash and it does not support.

  I thought that the ballyhoo all around this product because it has been working with Apple products.

  What I am doing wrong?

  If you want to use the HTML output only, start with a HTML5 canvas CC project. (or convert your existing project using Menu Commands > Convert to other document types and choose HTML5 Canvas from the option) animate.

  Once your project canvas of HTML5 is ready, export it as an OAM through publication settings.

  Place the OAM in Muse and test your site in the browser. It should all work fine this time, without the need of Flash Player.

• 3.5 "640 GB external hard drive does not work

  I bought a new 3.5 "external hard 640GO drive, but when I connect it with my laptop it came to nothing.

  The DHM light lights up blue and it makes noise...

  my laptop does not have a sign of beeing connected...

  * Please help

  Hello!

  The HARD drive is visible in disk management?
  Have you tried the drive on another laptop?

  In the worst cases, you must return the HARD drive to the computer dealer and request a new one.

  Good bye

• Equium A100-147 - Native resolution on the external LCD display does not work

  Hello

  My Equium A100-147 has 1 VGA and 1 S-Video output, so I use the VGA output on an external LCD monitor with a native resolution of 1680x1050@60hz, but integrated graphics Intel 945 card doesn t give me the correct resolution to choose for this monitor, the closest is 1600 x 1200 and some weird widescreen resolutions other that make my monitor see the scaling an ugly picture.

  So I tested another external monitor with a native resolution of 1920 x 1200 resolution closest gave me Intel drivers is 1920 x 1080, even the installation of two drivers of monitors, remove and reinstall the driver and same formatting the machine and reinstall everything from scratch gave no different results.

  I have another laptop MSI Wind with the same graphic card built in and the same version of the pilot, and the laptop detects both the monitor and the good resolutions for them, this isn't a problem of Monitor driver.

  Seems to me that is a problem with the S-video output, which makes this mess, but there is no way to disable it in the BIOS or any other place in Device Manager I still seem.

  Can someone give me some advice for what can do?
  Thank you!

  Hello

  You cannot choose the preferred resolution because the graphics chip does not support this external resolution or the installed graphics driver is not contained in this resolution. The two cases are possible.

  If you want to know if your graphic chip supports this resolution and then take a look at the user manual and check it.

  If the chip of the graphics card would support this resolution and you will not be able to choose, then that would mean that the graphics driver does not support this resolution.

  But first he must find out what external resolutions are supported by the GPU.

• HP Envy 15-j139TX: the BIOS using external storage recovery does not work.

  My HP Envy 15-j139TX got stuck (frozen) and I force closure by long pressing the power button. I tried to start by pressing the power button, it shows a black screen (display off) and the capslock continues to Flash.

  I did research on the problem and discovered that the issue was "the BIOS corruption failure" according to the information on the link below:

  http://support.HP.com/us-en/document/c01732674/

  I tried to recover the BIOS using an external storage device by following the instructions at the link below:

  http://support.HP.com/us-en/document/c02693833

  But it did not work. The lights keep flashing. I have my files b.SC. thesis on the computer and their need for pronto. (If not my life is pretty well made)

  I also couldn't find the files for version 10 of Windows (64-bit) to my laptop, so I tried with one I downloaded from another site and I got a BIOS of Windows 8.1 HP site.

  Is there anyway I can fix it soon or get my files as soon as possible. Help, please!

  Have you ever updated the BIOS before?

  If you have, you should be able to recover the BIOS using the Windows key + key B method.

  All holding the key Windows + B button down, press the power button and wait to see if the laptop responds with a message of recovery of the BIOS on screen.

  As my wife continued his mastery, I insisted on his recording of his files periodically to our home network NAS.

  You can remove the hard drive and connect it to a desktop computer to get the files from it. You can connect the hard drive to a USB to sata cable to connect it to a laptop.   Instructions to access the disk by opening the back door are on page 42 of the maintenance and service guide. The hard drive is part replaceable by the user, so you don't have to worry about voiding the warranty.

  http://h10032.www1.HP.com/CTG/manual/c03943414

  Your notebook is new enough to have the recovery key enter BIOS update available. Use the F.65 version in the Windows 8.1 driver download section. the softpaq is at the following ADDRESS.

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69886.exe

  You will need at least 256 MB usb key to create a USB rcovery to recover the BIOS with. BIOS update softpaq will offer the opportunity of creating a recovery USB. I used the method on multiple occasions and it worked for me.

• Hitachi external hard drive does not work on Sony with windows vista

  I use a Sony with Windows vista laptop. I just got a 500 GB Hitachi external hard drive today. It was detected after that I connected, but there is no way that I can access the hard drive and save the files it contains. I tried to go to the administration tool and tried to change the letters of readers and paths, but this isn't an option for me (he is gray and I cannot click on it). It showed that the disk is healthy but unallocated. Could someone help me please? I really need to back up my laptop using this hard drive external. Thank you. Irene

  Hello Irene,.

  ·         You get the error message?

  ·         Did you do changes on the laptop before the show?

  Follow these methods.

  Method 1: Run the fixit of the article.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the steps in the article.

  Tips for solving problems of USB devices

  Method 3: Try to access to the external hard drive on another computer and check if the problem persists.

• External hard drive does not work on windows 7 after using the external hard drive on a mac (osx 10.7)

  title says it all. It does not open on autoplay and does not anywhere, but is always works on mac

  http://www.Mediafour.com/products/MacDrive

  If you want to use the drive to read and save files on both mac & PC I think that you will need create separate partitions on the disk, a formatted for mac and one for the PC.

  The utility linked above only allows access to a mac formatted drive and access the data, having never had to use it I don't know if it allows you to save files PC to the mac player