External JAR and run the Script

Similar Questions

• All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  All files generated by a coil in sqlplus receive ownership of oracle: dba instead of the user of the BONE started sqlplus and run the script. There's a file with users owners of BONES of the coil.

  Script launched in until OS user 'A' on the 'A' server which launches sqlplus, then connects to a remote database through a service of tnsnames.ora as another user of the database and the results of this script are spoulées on the server "A".

  The file queued on the old server is written with rw-rw-r: read write user, group read the writing, reading and possession header that is the user of the OS. The file queued on the new server is written to rw-r-r user: reading writing, reading group, public reading and ownership oracle: dba.

  "" The user then has no privileges to modify the file and continue the process of transmitting the file, editing and deleting the file for the next set of commands. This allows us to keep the possibility to migrate to the new server we are unable to process orders.

  $ORACLE_HOME/bin/sqlplus - s user/password@prd1 @./script/CustomScript/R12_OM_UFPC-oracle.sql

  Background: old server running 4.8, Oracle 10.2.0.4 OEL

  New server running OEL 6.5, Oracle 11.2.0.4

  Tested so far:

  File and update umask to 0002 instead of 0022 is now generated as rw-r-r. However, the property is still oracle: dba.

  Update of ownershipt of $ORACLE_HOME/bin/oracle.exe of oracle: oracle (edi added the user to the oracle group) and chmod 6751 oracle.exe. This created several problems where crucial scripts, that is to say of sqlplus failed to run.

  Added! chmod 755 output.file.name - OS user 'A' is not allowed to change to mod.

  Added! command cp MV output file and that generated the file as a user of the operating system: oracle. It is a potential work around in case of emergency, but the developer would have to rewrite the countless scripts.

  Any ideas?

  I have reproduced the behavior of the old server and am able to spool a file via sqlplus under OS user. No changes have been made on the remote database server. All the changes have been on the new server hosting a small 11.2.0.4 database on a server running OEL 6.5 32 - bit OS.

  (1) removed the sticky bit $ORACLE_HOME/bin/sqlplus using chmod u-s, g-s, o - s suggestion of Billy ~ Verreynne

  (2) modified the main group for the 'oracle' user match the user operating system applications, while maintaining membership in the groups 'oracle' and 'dba '.

  -We are dealing with here EDI processes, so the Group was called edi.

  (3) modified property of the files tnsnames.ora and listener.ora for oracle: edi

  (4) restart the receiver

  (5) disconnect / reconnect

  Script runs as expected, the output file contains the correct ownership and permissions.

  Thank you all for taking a look and offering options.

  -Josh

• TypeError: try to run the script compilation and go on a 'mistake' in scope cleared when message returns the transfer through images for each image. Does not affect viewing.

  TypeError: try to run the script compilation and go on a contour

  Above the error message appears when moving between images - back and forth. By clicking on the OK button removes the error message and there is no apparent problem. The window that appears refers to a JAVA Script Application (I guess that FIREFOX is the application?)

  -> Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems

  Check and tell if its working.

• Foglight initialize a command on the PC and run a script that makes a sound or a banner on hold the workstation?

  How can we get foglight to invoke a command on the pc and run a script that makes a noise or a banner on my computer

  http://en.community.Dell.com/TechCenter/performance-monitoring/Foglight-administrators/f/4788/t/19552156#14120

  The question really selectively running a sound in a JavaScript browser session, do not turn something local on the user's PC.  The Sonic equivalent of an animated GIF as an analogy.

  The most difficult part, in Java, play a sound through various types and versions of browser without opening a 'player '.  This has been an incredibly difficult task by Oracle, on behalf of the whole being.  If you really want to dive into it, here are some links:

  http://docs.Oracle.com/javase/7/docs/TechNotes/guides/sound/programmer_guide/contents.html

  One approach that seems to have some promise for very small sound files is:

  http://stephengware.com/projects/soundtoclass/

  I got no time to mess around with it yet.

  This seems to have some promise, but still once, have not figured out how to operate:

  import java.awt.Toolkit

  Toolkit.getDefaultToolkit () .beep)

• "Cannot run the script at line 1. File or folder does not exist. »

  Whenever I have start AfterEffects, I get an error as he is looking to find my recent projects.  The error is as follows: "unable to run the script at line 1. File or folder does not exist. "I haven't changed the location in one of my project files.  It's the same external drives that I use for months.  When I click on OK the same window opens several times and then finally the historic window opens completely blank and empty.  I am able to reopen projects however since the RECENT PROJECTS drop in the top bar.  It is a very strange and disturbing behavior.  In addition, I always use 13.7.2 because when I go to update it is impossible to connect and gives me this error.  I sat with Adobe support for an hour today, and we couldn't understand.  As I am in the middle of major projects, I decided to not update, but this error at startup is very worrying.  Someone has an idea of what could go wrong or how I can fix this?

  Thank you very much for your time.

  -Fredo

  

  Ok!  Just got a response and an Adobe technical support solution.  The problem is that there is a problem with these versions of sequels (and I found the same problem in first to my horror this morning as well!) and the last couple Mac OSs.  The solution is to close the window "library".  It is then normally.  Apparently they fixed in the last update, but I found the same problem on my second computer, which has been updated.  Anyway, if anyone has this problem, close your cc library window.  Voila.

• How to run the script with parameters such as alarm action .ps1

  Hello

  I know not how to configure alarms, I know that I can point to monitor cluster for changes (via the GUI), but... I have different groups and I would like to set an alarm by vCenter which monitors cluster for changes. Let's call it "RefreshCapacityInfoOnExternalDB".

  So, lets just say. I would like to run my script whenever a virtual computer is added, Reconfigured or ESX host are removed, added in a Cluster. The alarm would launch the .ps1 script written in turn the ability to update external db cluster info.

  Shortly said: ability to cluster values are changed

  What I need is this: run the script-> CapacityInfoRefresher.ps1 < Cluster_name_where_ReconfigEventsTookPlace >

  I guess that, first I need an environment variable (if it exists) that can be used as a parameter for the < Cluster_name_where_ReconfigEventsTookPlace > placeholder script. Right?

  Chapter 16 of the book of LucD & Friends "PowerCli reference" mentions some environment vars but I'm stuck. Anyone using these options?

  THX

  A.S.

  You can set your alarm on the node above in your vCenter tree, this way it will be active for all collections in the vCenter.

  These alarm environment variables are automatically available for your alarm script when it is triggered.

  These environment variables, you will be able to determine to which cluster the alarm was pulled.

  So I don't think that you need to pass this information as a parameter to the script.

  Perrhaps you could share what exactly alarm you want to set and what looks like the script which should trigger alarm.

  And Yes, I use these environment variables in scripts of alarm

• Red field when I try to run the script with 10G

  I recently installed 10G XE. I am able to create a new user and was trying to run a script for JustLeeBooks on the site of Thompson Course Technology books. I downloaded the files on my computer and then entered the new user and viewed and downloaded the script. The area where appears the script is all red. When I click on run, nothing happens. This script box are red like that?
  
  I can click on remove and delete the script, but I can't seem to run the script.
  
  What should I do to run the script for my database class?
  
  Thank you.
  Vicki

  Hello

  Pre installed Apex XE is quite old and does not take in charge all new browsers.
  Did you try to use other browsers?

  You can also upgrade Apex
  http://www.Oracle.com/technetwork/developer-tools/Apex/upgrade-Apex-for-XE-154969.html

  But be aware that you lose the database management features. But you can make those for example with the SQL Developer as above shows link.

  Kind regards
  Jari

• Run the script in local path calc

  @Hi all,

  We have a requirement in which an a certain application calc script is run to clear data. The data to be erased (months) are mentioned in a file that we receive the ETL.

  The mechanism is so that, from workday1 up to Workday4, we have a clear current and previous months and workday5 until the rest days, delete us the data of the current month.

  We were doing this manually so far and we need to automate the process. We used VBScript to read the contents of the file that is sent by ETL and change the script to calc.

  But the problem is the calc script which is getting changed is present in the local system and not on the application server.

  Please suggest some options where I can call the calc updated the script locally and executed him from maxl.

  Appreciate any help on this!

  Hello Sadhana,

  When you create a calc script VB logic on the local computer, then you can probably develop it a little and write a MaxL script with the calculation inside. Then you can run this script on your local computer where MaxL has been installed.

  Kind regards

  Philip Hulsebosch

• Unable to run the script

  Hello

  I'm playing with host character, and so far I love it.

  However after exporting my scene and then trying to import using the AE

  New model of character animator Recording.jsx

  whenever I try to import the XML file, I get an error - Impossible to run the script on line 61.

  I'm doing something wrong?

  Thank you

  Hi Phil... After you run the script, select the first PNG file from the exported sequence. The title bar for the import dialog box has similar instructions, but it is true that it is easy to miss.

• Run the Script before the opening of Outlook 2010

  We have a command to run to load an add-in in Outlook before you open it.   Us thinapp Office and it works very well but we have to find a way to run the script once when they first open Outlook.  Does anyone know a good way to do this?  I got to the point where I created a shortcut under Office tools to run the script manually but I want it to be transparent to the user.

  Basically, we need run the following command to load the add-in.

  servername AppInstall.exe

  Try using VB script. For examples, see here:

  Writing scripts in ThinApp | VMware ThinApp Blog - Articles from VMware

• Please let me know why I can not download Flashplayer because it runs the scripts on the page... I bought acrobat dc 7/10.  Thank you.

  Please let me know why I can not download Flashplayer because it runs the scripts on the page... I bought acrobat dc 7/10.  Thank you very much. @@

  Hi dmrmultimedias,

  I guess you are referring to the script error using the installer online.  If so, the DPI setting has been identified as the culprit.  If the DPI setting is not set to 100%, 125%, 150% or 200% installer will return the script error.  If your DPI setting is set to something else, please set it to one of these and Setup online should work.  The team is working on a fix for this.

  To check/change the DPI setting:

  1. start the control panel and go to control Panel\All Control Panel Items\Display

  2. in the left menu, select the custom text size (DPI)

  3. in the custom configuration Windows DPI select 100%, 125%, 150% or 200% in the menu drop-down

  4. Select OK

  5. Select apply

  6. open a session/disable

  7. online installer should now run without displaying the script error.

  This is planned which will be fixed within two 2 weeks.

  --

  Maria

• Run the script inside the virtual machine the user when the user connects or reconnects

  Hello

  is it possible to detect the user that the user has connected or reconnected to his office inside the virtual machine and run a script?

  It is also possible within the VM user to determine if the user is connected and how long?

  One way to do this is via the following powershell command, but this only works if the user is connected through PCoIP Protocol.

  Get-WmiObject-class Win32_PerfRawData_TeradiciPerf_PCoIPSessionGeneralStatistics - SessionDurationSeconds property

  Best regards

  > it is possible to detect the user that the user has connected either reconnected to his office inside the virtual machine and run a script?

  You can run scripts as user on login and reconnect, this has been a feature since 3.0. See running commands on the desktop view.

  > It is possible inside the VM user to determine if the user is connected and how long?

  I don't think that we expose, but you should be able to query Windows for the connection time, or you could write the last time to connect with a script (maybe that is the reason for your first question?).

  Mike

• No model output module custom when you run the script from another process

  Hello

  I have a following problem:

  Try to automate the video rendering. When I run extend script of the program that is launched at windows startup, there is no custom output module template. If the script is started manually, it works perfectly.

  Trying to applyTemplate output module in the results of item renderer error queue.

  I use AE 2014 (13.1.1.3) and windows server 2012 standard r2.

  Thanks for help.

  Sounds like a permissions problem, you will need to set your user contexts and escalate privileges before running the script.

  Mylenium

• Cannot run the script line of 3712

  CFFO todo o principle pra instalar o ft_Toolbar 2, very ao open o after ele cylindrical o erro cannot run the script online 3712. undefined is not and the object. O that pode ser?

  You should find the forum for any product it is and post your questions there.

  Here is a link to a page that provides links to all of the Adobe forums...

  The Forum links page: https://forums.adobe.com/welcome

• You will need to run the script for some ESX hosts.

  Dear team,

  I m connected to 4 esx host, but I want to run the script only 2 esx host asking you to help me how to do?

  concerning

  Mr. VMware

  You could start the script with the cmdlet Get-VMhost to select only the two hosts that you want to output to. For example:

  Get-VMHost host1, host2. Get - VM

  Displays only the virtual machine running on host1 and host2.