External power supply for node 3202
Hello
I would like to design a solar energy system to the 3202 end node. But I'm not sure how to determine energy 3202 needs?
The external node power input is labeled with 9 - 30V, 2 w max. However, NEITHER provides funds (among to the 3202 node accessories) power which provides the power of 12 VDC up to 1.25 by 15 w.
If I use the 12V battery, that the current rating (or power) should be? 2W or 12V, 12V, 15W.
Thank you
Ahmed
I got the answer of the team of Technical Support OR Arabia.
Here is their response:
The 3202 node would be damaged if it takes more power of 2W. But when you connect a 12VDC with 1 battery. 25 a nominal current max, then the node 3202 draws much less current according to their needs.
Tags: NI Products
Similar Questions
-
I have HP 8200 elite CMT CPU in which 320 watts PSU is installed. I want to use AMD Radeon HD 7770 requiring more power (minimum 400 watts power supply) for maximum performance. But the fact is, the higher Watt PSU is not available for my cpu because its cables do not match that. So I ask if I can use the external power supply to power my GPU instead of the CPU power. Will be this harm to my PC?
Kindly help me to solve this problem.
Thank you
Thank you for the information, @haseebkhan7310.
I'm not a fan of using a separate power supply to power a video card. It can cause problems. However, here is a video that will show you how it can be done:
-
Connection RPS720 redundant external power supply for DELL 5548
Hello
We have two DELL 5548 network switches.
According to the manual of the switch, we can buy the RPS720 external redundant power supply connection to DELL 5548 current to reach the power supply redundant network switches.My question is how to connect this external RPS720 of redundant power to the existing DELL going on?
I only buy the external RPS720 of redundant power, including the power cable connect to switch existing or I need to buy any item to achieve?
I try to search on the internet but it is altogether less information regarding on this.
According to the QuickStart guide, all cables are included. Page 4 ftp.dell.com/.../powerconnect-5524_Setup%20Guide2_en-us.pdf
-
The upgrade of the power supply for a HP Pavilion 500-054
Hey people,
I'm changing the 500-054 flag so that it can play a few games, not a hardcore gamer, just want to be able to play the occasional game. I want to get a lower end external video card, but this requires a power supply greater than 300. I am looking for a new power supply for my computer, but I couldn't find one for the 500-074. Are the ones that will work for my computer or I am a hopeless case?
Thank you
A standard ATX power supply will work. Please look at the Corsair CX430, CX500, CX600, or their variations of modular cables for your needs.
If you have any other questions, feel free to ask.
Please click the White Star of KUDOS to show your appreciation
-
No internet with an external power supply on L20
Can connect to internet when my L20 runs own PSU, but when the battery level is low and demand for external power, internet connection is lost when my power adaptor attatched. In addition, internet does not connect if the external power supply is used from the outset. Disconnect the external power supply and run on battery, the internet connection can now take place! All thoughts.
Try to check the polarity of the DC power coming out of the AC adapter is correct. In fact, make sure you have any dc voltage coming out of the adapter.
I don't really understand what you describe. Do you really mean that ONLY the internet connection is affected. Everything works well on outlet. The power lights and disc are all about; the battery OK charges; the screen is lit; the fan is running and that these things will continue to work if you then removed the battery? (Except for the battery charge of course).
-
I made an update of the system to the original settings and everything seems to go as usual. While performiong the many windows updates, I noticed that the battery indicator indicates "no battery installed. I found a few solutions dealing with this problem (none of the other solutions worked) and that which is shown updating BIOS. I checked and the BIOS is F.07 and the current version is F.41. I downloaded the update and begun the process of Windows. The system restarts to start the process, but when the BIOS updated starts I get the following message:
"A significant update of the BIOS of the system is available, but the computer is not connected to the external power supply. Please connect the external power supply and then press Enter to continue. »
The computer is connected to the power of HP to the original address since it is the only way so he can turn it on. I tried removing the battery and from the update only the connected power and get the same result.
Either way, I tried to insert a different battery, I have more than one of these laptops.
Sorry
Please test the battery after boot press F2 HP Diagnostics
http://support.HP.com/us-en/document/c00821429
and calibration of the battery for laptop
-
HP Pavilion 500-326na: upgrade of power supply for HP Pavilion 500-326na
Last year, I bought a HP Pavilion 500-326na. I now want to update its graphics and to do this, I need to power level. I want to upgrade to a CX500, but the specs say that his current power is "external". I don't know what this means, and indeed, I don't know if I will be able to upgrade. I see no reason why I shouldn't be, but everything I've seen only offers assistance on internal types.
Thanks for any help.
Hello
Look at the power supply cord. If you have a device of black brick similar to those for portable computers, then you have an external power supply. PC with external cannot be upgraded with the installation of an internal power supply as a Corsair CX500 according to HP internal.
-
Propeller works only with external power supply
Hello
Just got my Helix and I have some published, one of the biggest problem so far is that it will only fuel upward and stay on with external power supply, when I dock this works very well, if I disconnect it it stops, if I plug the power supply into the Tablet light it up, but as soon as I remove the power cord it will turn off I checked and the batteries are charged, any advice at 100%?
Thank you
Thanks for the reply, I called Lenovo technical support and they thought it was the motherboard, technology has changed and he made similarly he suspected a defective battery, it replaces and it works fine now, so it was a defective battery on the Tablet, was not getting charged, Lenovo technical support was great, fast and very apologetic the laptop so far, thank you for all the help that love.
-
External Power Supply PHD 2.5 x camera
Hello
Does anybody know, if there is a power supply available for version 2.5 external x camera?
and perhaps also the order number?
The customer got offered with PSU-CAM-V, but I guess that's one for the 4 x and 12 x PHD Cams...
Best regards, hans
Hi Hans.
See is one the PrecisionHDMC camera User Guide on pg 9, 2.5 x camera has a power connector as well as the 4 x and 12 x cameras of. It does not say that the power connector is for future use, so it doesn't seem like it supports an external power supply at the moment.
-
Qosmio X X 770-11 - new motherboard and power supply for sale
Brand new motherboard and power supply for sale
Also Intel® Core i7-2670QM CPU
4 096 + 4 096) MB, DDR3 RAM (1 333 MHz) memory
1 000 hard drive (Solid State hybrid 4 G Drive with 500 GB and 4 GB of memory NAND flash + 500 GB) GB
Jim Kerr sent from my iPad -
I need power supply for HP Z220 CMT workstation up to 500 watt
HI everyone I want to improve my diet is 400 watt, this does not work with my new graphics card, it's Asus GTX 770 Nvidia GeForce DirectCU II OC 2 GB GDDR5 he needs a minimum of 500 watts...
Thank you very much for everything give me it please link or model power supply for hp workstation z220 up to 400 watt.Hello:
Power supply in the z220 belong to someone, which means that you can not install any other food but the 400W provided by HP.
You can also ask your question on the HP Business Support Forum - z section of jobs to see if anyone knows if one different PSU from another series of z that Workstation will work for your model.
http://h30499.www3.HP.com/T5/workstations-z-series-XW-series/BD-p/BSC-272#.U5nJ2f1OXGg
For example the z600 has a 650W power supply, but I have no idea if this P/S will work in the z220.
Perhaps someone on this forum will have some alternatives for you, but don't get your hopes up.
-
Power supply for use in the UNITED Arab Emirates
Hello
I just bought a Time Capsule of the airport and an Apple TV (4th gen). I'm moving to Dubai for work and I intend to take with me. I can't find out how to replace the power supply for use in Dubai (plug type G).
- Can I just buy a travel voltage converter?
- What is the frequency difference (US is 60 Hz and UNITED Arab Emirates is of 50 Hz)?
- Could I just buy a 'EnergyPal travel Charging Station ETCS04' and connect directly?
Thanks for any help!
The airport Time Capsule and the Apple TV work on 100-240 Volts and 50/60 Hz automatically, so they'll work pretty much anywhere in the world if you have the map of the right ankle. A voltage converter is NOT necessary.
You can buy the cards you need to any store from the airport, luggage, in Dubai store, etc., most of the hotels the. If I remember correctly, Dubai uses the same type of plug that she used in the United Kingdom, as well as should work as well.
I do not think that the higher 5 GHz channels are permitted in Dubai, so be sure to put the time Capsule to use a lower numbered GHz 5 channel... 36, 40, 44 or 48.
-
Power supply for Officejet 4500
The power supply for my Officejet 4500 packed. Someone knows how to get a new or old get that fixed. I tried several shops local computer without success.
Here are the details of the part you are looking for:
Power cord: 8121-0889
Power supply: 0957-2269You can call HP (1800-474-6836) to place an order, or there are many editors who have these parts.
-
HP 15-AC184TX: power supply for laptop HP 15-AC184TX
Hello. I need to buy a new power supply for a 15-AC184TX HP laptop.
The page support Web HP heredoes not tell me what specifications is feeding.
(I have no original power to compare).
I hope that someone more competent than I can help you!
Thank you, JER.
Maintenance and Service Guide. HP part number is at the end of each)
-
Security concerns about the external power supply connected to the my map of 9401 TTL inputs
I have an external power supply (5V DC, 500 my) that I use to test my card 9401 count entries and check my LV code is working properly. Power + 5V is used as high signal and ground as a weak signal. I haven't done the link yet because I wanted to know if there is any concern to burn my card.
Hello
Normally, if everything is OK, it shouldn't be a problem.
But in the real world "things" happen
My Advisor is to add resistance series (in this case 1 k) to protect your device if Murphy enters the room something goes wrong.
Maybe you are looking for
-
How can I configure numerical Lock ON when the computer starts?
I have a new laptop HP G70. In the User Guide HP G70 on keyboards - C01540939.pdf, paragraph 3 using keyboards & pointing devices, Page 8 there is a note "the function of the keyboard that is active when the computer is turned off is restored when t
-
Skype does not recognize the built-in webcam
Hello world hope someone can help me. I used Skype with no problems until today. Skype does not have a webcam built-in to my probook 4330 s with Windows 7 more. I'm sure that the webcam works just because I tried with other applications. I tried agai
-
Satellite L850-1V7: MS Word 2013 - keyboard shortcut SHIFT + F3 question
Hello When you use Microsoft Word, a very useful shortcut is SHIFT + F3.This allows to change the case on a (current) Word or phrase, it encircles between all CAPS - caps first - without a ceiling. On the Toshiba L850 1V7 - 2013 using Word from Micro
-
another computer on my network has the same IP as my computer
Hi - I started my laptop computer and received the message saying that above, and that Windows has detected an IP address conflict. What does that mean? Someone else is using my WiFi signal? What should I do to solve it? Thank you
-
The RAW files on the SD card "appear to be damaged or not supported" but JPEG work very well.
When I use my Rebel T3 SD card, jpegs load very well but lightroom 2.7 will not load the raw on a SD card files. Anyone else having a problem with that?