External sources (Help!) tags incorporation

Similar Questions

• DAQmxCfgSampClkTiming sampling rate for external sources

  I'm looking at the example of Synchronized_AIAO_Shared_Clock.c to http://zone.ni.com/devzone/cda/epd/p/id/2352 .  This example creates a string of tension that HAVE streams at 10 kHz, and then creates a tension AO channel that is bound to the sample clock HAVE to synchronize channels.  I use this example to understand the use of DAQmxCfgSampClkTiming here.  This is the corresponding code (comments are mine):

  Create a channel of tension HAVE will work continuously at 10 kHz

  DAQmxErrChk (DAQmxCreateTask("",&taskHandleRead));

  DAQmxErrChk (DAQmxCreateAIVoltageChan(taskHandleRead,"Dev7/ai1","",DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,NULL));

  DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandleRead,"",10000.0,DAQmx_Val_Rising,DAQmx_Val_ContSamps,1000));

  Create a tension AO channel, and then attach the clock of the chain in tension of the AO for the sample clock HAVE
  DAQmxErrChk (DAQmxCreateTask("",&taskHandleWrite));
  DAQmxErrChk (DAQmxCreateAOVoltageChan(taskHandleWrite,"Dev7/ao0","",-10.0,10.0,DAQmx_Val_Volts,NULL));

  DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandleWrite,"ai/SampleClock",1000.0,DAQmx_Val_Rising,DAQmx_Val_ContSamps,1000));

  .. So what I'm trying to understand here is how to interpret (1000.0) sampling rate argument in the second call to DAQmxCfgSampClkTiming, where the canal AO is related to "AI/sampleClock.  It seems to me that this argument must be meaningless, other than perhaps to determine the size of the buffer, since by definition this AO channel will clock on a sample of every time that AI/SampleClock rises.  Then maybe someone can help me understand how this argument is used...

  But in all cases, the docs say "If you use an external source for the sample clock, set this value to the maximum expected rate of the clock."  In this case, the clock is set up a few lines earlier at 10 kHz, so is not this 'evil' in the second call to DAQmxCfgSampClkTiming, a sampling rate of 1 kHz is specified (much less than the maximum rate of sample expected)?  What is the consequence of this?

  Thank you!

  -Dan

  Hey Dan, some big questions you've got.

  You pretty much put the nail on the head with your guesses. The size of the buffer is based on the resolution of data acquisition in combination with the sampling frequency that you specify. Think of it as an implicit in the size of the buffer declaration (but it is certainly an explicitly define that, if you wish).

  As for your second question, which relates to new back to the size of the buffer, except that this time it is for the use of an external clock source. Given that the material has no implicit way to know the frequency of clock of this external source, it asks you to specify explicitly the maximum frequency so it can create a buffer of the right scale size.

• Is it possible to determine if a person has access to my computer via an external source?

  Original title: hacking

  Is it possible to determine if a person has access to my computer via an external source?

  Hello bconn07,

  You must grant permissions via remote access or they would have to introduce a software on your pc without your knowledge for them to access. The software is usually by means of malicious programs and your anti-malware application must pick up that, especially if it's a keylogger or a rootkit. Try to download Malwarebytes antimalware http://malwarebytes.org (download the free version). Install it and then run it. It's good enough to malicious software localization.

  Pirate can introduce a software called keyloggers that send information on the key, you press on your keyboard. This can help them steal passwords etc. However, I do not say that you even have apps keylogging or view on your system, so don't panic. I suggest, however, an application called Keyscrambler personal http:// http://www.qfxsoftware.com/download.htm it works by disguising and precautions that you ever install key press you. By example, if you typed "Bill" keyscrambler journal would be something like 'kl97' thuis makes it very difficult for any keylogging software interpret what keys you actually used.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• When I try to burn a music disc player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source

  I have computer aGateway running Vista Home Edition and something happened with WIndows Media Player.   I have the DVD/RW internal drive and external DVD/RW as a player.  I use them mainly to copy music files and it has always worked fine until yesterday.

  When I try to burn a music disc, the player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source (such as the CD or car drive).  Worked fine Saturday and had burned discs Saturday night recognizes the two drives as data drives.

  Is it something that needs to be reset or changed?

  In WMP, please click the button burn up and make sure that the Audio CD is selected. Then try burning the CD again, they now play on a standalone CD player too.

• Several identity AD External Sources in ISE 1.2

  First of all I guess it's possible to have several entries AD for external Sources of identity in the ISE 1.2? When I view Active Directory (AD1) it displays my four ISE servers with the connected state, but I do not see where to add anything extra. I did not originally define this figure so miss me something somewhere if possible. I have however maybe add under LDAP and then he would roll in AD or something, but I have nothing listed on LDAP either.

  What I'm trying to do is find a way to have the ISE to cover our two different areas. We have a large forest but currently that is divided into two areas AD based on our two divisions.  I'm trying to see if possibly I can just get through the existing configuration to take security on the other groups domain in the dictionary, but so far that has proved do not capable.

  Brent

  The ISE v1.3 allows you to add 50 domains diff., please update v 1.3

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-3/ISE-ADIntegrationD...

• Is it possible to have a block of text from an external source (ex. TextWrangler file) load in multiple pages (file TW exodus as an "insert" in 4 different pages on a site)?

  Is it possible to have a block of text from an external source (ex. TextWrangler file) load in several pages on a site in the 'performance' (e.g. TW file as an "insert" in various pages)

  Use SSI. If you're on a PHP server just use the PHP include, if not take a look on SSI: the command Include

• With the help of an external source via Photos on Mac app

  Hi all!

  Anyone know if it is possible to have photos of access app Photos from a different source? Currently the photos app will see what's on your device. However, I have a 128 GB Macbook so do not keep my photos out there. I'm looking for a way to access my photos through the WD My Cloud drive I have through the Photos app. The reason for this is that I was hoping to use iCloud sharing photos so I can edit photos with my iPad and then extinguished by e-mail and post them on my Mac. I also prefer the Photos app on all devices on WD my cloud application.

  I know it sounds a little confusing, but I'm happy to explain to someone who doesn't quite understand how I explained.

  Thanks in advance!

  Yyour entire library of Photos can be moved to an external drive. Just copy it to a new drive, then double-click the photo library file. This will 'learn' Photos where the pictures are stored.

  When you enable iCloud photo library on your Mac and your devices, you will indeed have access to all your iCloud files.

  One caveat: iCloud library is NOT a solution to backup for your item photos and videos. You should always set your library of Photos on your Mac to original copy. It's OK to keep your libraries on the as optimized device. It will keep the storage space on the iDevices.

• With the help of external source paths

  Hello world

  I'm quite new to Flash Builder. I created an ActionScript project and added a folder on my hard drive as a source path. This file is external to the project. It creates a folder in the Explorer window package with the small arrow showing it's related... but also, it seems to copy all subfolders and classes in my output folder... that I named dist... Why does do this and y at - it a way to not do? It does not seem to make sense to me.

  Thank you

  Kyle

  Try this:

  (1) project > properties > Flex Compiler

  (2) uncheck "copy embedded files in the output folder.

  Jason San Jose

  Software engineer, Flash Builder

• Timeline on External / Source monitor

  I am currently moving to CS5 Prod. Prem all recently installed applications.

  Prem Pro, how can I get the images placed in the chronology of the gang for the Source monitor Panel sequence or output to my external monitor? Since the source monitor Panel, I can choose the sequence, but when I manually rub back and forth through the sequence using the timeline there is no output to screen external TV only for the program monitor funds located in the PP. space

  Thanks in advance for the help. I don't know that I have many more questions. I'm above A migration / FCS3.

  -John

  I went through a Blackmagic intensity Pro HDMI/component/composite pci card.

  Okay, that's important information that should have been part of the original post. With a map of the BM, you should use their sequence presets; This should allow broadcast through the map.

• Creating a table of jpg files external, please help.

  So what I want to do is to load external jpg in an array of MovieClips and then access the main onEnterFrame function. My code is below:

  var imageLoader:Loader = new Loader();

  var imageArray:Array = new Array();

  function loadImage (): void {}
  for (i = 0; i < 9; i ++) {}
  imageLoader.load (new URLRequest ("image" + String (i) + '.jpg'));
  Demonstration [i] = new MovieClip();
  imageArray [i] .addChild (imageLoader);

  }

  addEventListener (Event.ENTER_FRAME, onEnterFrame);

  }

  I tried to add an Event.COMPLETE function, I found:

  imageLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoaded);
  
  function imageLoaded(e:Event):void {
       var image:Bitmap = (Bitmap)(e.target.content);
       imageArray[i] = new MovieClip();
       imageArray[i].addChild(image);
  }
  
  Unfortunately, I usually only ended up with 1 or 0 images, and errors. I can't seem to properly pass the i
  value, so that's a big problem because the order the images go is key to my program.
  
  Please help me get this working so my image gallery can work, thanks!

  So the problem is that you want in the table in the order I'm right on that?

  See the updated code:

  var imageArray:Array = new Array();

  var imageLoader:Array = new Array();

  function loadImage (): void {}
  for (i = 0; i< 9;="" i++)="">
  [i] var imageLoader = new Loader();

  Demonstration [i] = new MovieClip();

  imageLoader.load (new URLRequest ("image" + String (i) + '.jpg'));
  imageArray [i] .addChild (imageLoader [i]);

  imageLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);

  }

  addEventListener (Event.ENTER_FRAME, onEnterFrame);

  }

  / * function imageLoaded(e:Event):void {}
  Bitmap of the image: var = (Bitmap) (e.target.content);
  imageArray [index] .addChild (image);
  }*/

  In this case, you are unable to follow if an image is loaded or not. It's easiest to do this. If your images do not come from dynamic sources and are set in the number and the position, you can use this method too.

• Clientless VPN works internally but NOT externally. Help please!

  I have set up my VPN Clientsless on one ASA 5510 firewall and to access internal (using the IP address of the firewall internall) it displays very well.

  But when I entered the external IP address of home, for example https://232.14.14.14/ , it gives you the choice of procceed or not and wjen I choose it is a secure page to procceed then I get the following message:

  Under Construction

  The site you are trying to view not currently has a default page. It can be being updated and configured.

  Please try this site again later. If the problem persists, try contacting the Web site administrator.

  If you are the administrator of the Web site and that you have received this message in error, please see "Enabling and Disabling Dynamic Content" in IIS Help.

  To access IIS help

  1. Click Startand then click run.
  2. In the Open text box, type inetmgr. IIS services manager appears.
  3. On the help menu, click Help topics.
  4. Click Internet Information Services.

  Any ideas please?

  Great, thank you!

  Now, you have two options:

  1 remove the static translation or change to another port:

  not static (inside, outside) tcp https Firewall5510_Server netmask 255.255.255.255 https interface

  2 change the WebVPN port to something else:

  WebVPN
  

  no activation outside

  port 8443

  allow outside

  So when you sign in, you go to: https://1.1.1.1:8443

  HTH.

  Portu.

• Link from an external Source that opens my Adobe DPS

  Is - it somehow possible?

  In detail what I have to do:

  Someone else made a soft (non - Adobe DPS) which is supposed to have a link to my App. If this link is typed, the device is supposed to open my Adobe-DPS application.

  I found this: link to the URL customized by using App DPS scheme but I think that it is an outdated Version. Is there something like that for Adobe-DPS 2015?

  Hello

  You can use the external deep link to DPS 2015:

  Digital Publishing Solution helps | Hyperlinks in DPS 2015

  Best,

  Mike

• modules and help tag

  I'm back in British Colombia after a period of absence and have created a temporary site. If some changes are good, I have a terrible time to access the modules and tags. When I open the Business Catalyst Panel in Dreamweaver under Modules I have are all Modules of the Site (Pages, content owner and various), Web forms and social media. Nothing like events, Ad rotators, or Navigation, under data all I have is "No data available for this page." It is obvious that I have to do something to get the list of tags and modules, but what?

  I do not have the file base.css, ModuleStyleSheet.css, layout.css or styles of phone.css active in the html page header. What is my problem? I prefer to create my own css styles, but I'll do what I can to make this work.

  I have no way to set up an online store. Long, long ago, I was able to implement a completely custom website, example and still access all the tags and insert them. Now, I can't even find them. I need to be able to build the site quite far as my client can see what the site will look like. Right now I have a home page customized without navigation. Nothing, zip.

  After reading and reading the tutorials, it seems to me to be able to build a navigation bar in Dreamweaver and then download the file and the css to control the site of BC and make the NAV drop a custom module, but the tutorials are also nebulous that I can't be sure it will work. I'm going to anyway.

  Any help would be greatly appreciated. My skills are average to advanced with static sites. It's my first real brush with dynamics of coding using CS6.

  Thank you

  Sheryl

  Hi Sheryl,

  The admin and DW share the new tag module concept. Tags if there is no availibe to layout your in will not show anything, Modules will see the aalways as a tab.

  If your not to see the other things the Site can't be a plan that supports other functions. Basic Web is real base for examole.

  I'm not sure wha tyou mean with regard to styles. If you have chosen a model it may have any other style sheets, but a raw never BC site has the css of modulestylesheets.

  Find out here:

  http://forums.Adobe.com/community/business_catalyst/documents

  You also have links to party help resources 3rd on the right as well.

• Receiving XML from an external Source

  Hello
  
  I am using the HTTP on Oracle 11 g SOA Suite adapter to get the XML files in my BPEL.
  What is the right way? or should I create a Web service that accepts XML files and expose it on the Web?
  
  The external system wants XML files send us only by using the HTTP Post method.
  
  Please let me know
  
  Thank you
  On

  As I mentioned earlier, it's entirely your choice.

  (a) to create a Web Service (from BPEL Services) as a 'Service' and then create a WSDL?

  Sync web Services involves the request and response, and it is a real time communication. Immediate response is necessary.

  (b) should we have just an asynchronous BPEL that will become a Web Service once its on the server?

  Async web service includes the request and response, but the response may be delayed. No immediate response.

  (c) use an adapter like AQ, MQ etc...

  Adapters are used to integrate the diverse message with Oracle SOA applications/source. If you receive/send a message to an inhomogeneous system, use relevant adapter.

  Also, is it possible to receive without (FTP and SOAP message embedding) XML files?

  Many other ways like HTTP (rest) of the JMS, QA, etc. I suggest you analyze your needs clearly and on the base who choose a particular design path. You can also get feedback from the any SOA Architect in your org.

  Kind regards
  Anuj

• play an mp3 from external source

  Hello
  
  I read the clues that I could find on files external, streaming, etc.,
  
  I have some mp3s on the hard drive and a flash drive.
  I have them in a list in my film (via BuddyAPI). My jargon points directly to them.
  
  I can't play just by their SEO.
  They will play by baOpenFile() in Windows Media.
  
  Help?
  
  Thank you
  BigDaddy

  Hello

  Thank you!

  playFile channel, this file is the answer.

  A go to the framework script had my code all tied up.

  Thank you
  BigDaddy