Extract newbee question

Similar Questions

• OFR Extraction Learnset questions

  Hello

  I'm working on a POC for CAO to extract the data from the scanned drawings. It is not related to AP, so I had to start from scratch with a lot of things.

  I worked in the Guide OFR-Designer, but I hit a few questions that stopped me in my tracks.

  Here's what I have:

  -J' created a Classification Learnset and RPO is now correctly classify images

  -My class structure looks like this:

  -Drawing.sdp

  -Drawing

  -Architecture

  -Engineering

  -Generic

  -Geographical

  -Map

  -Vacuum

  Currently, I am putting in place field extraction. I only get a few fields from the images.

  I put the 'Analysis' method for the fields to be "Format Analysis", by using a simple expression.

  When I work with different images by way of definition, I gives me appropriate candidates. I therefore assumed that I was ready to go to the training.

  Here are the problems I encounter:

  -When I go to Train Normal Mode and process the images in the Learnset Extraction that I put up, I get two questions:

  -The first document gets a candidate for the first field, but all following images don't get a candidate (even tho ' they do during treatment in Def mode).

  -In addition, my second field is grayed out and I can't select it.

  -If I try to use the Mode of Train of check, I get an error on the field of Classification for the generic class definition. Not sure I should use this, but I'll try anything at the moment.

  If you have suggestions or questions, I would really appreciate the input.

  See you soon,.

  A

  Hey

  I finally got around my problems, and I thought I want to be fed in the thread that I did to solve the problem.

  In fact, I had three questions:

  1. Firstly - I shouldn't have tried to use the training mode to check, because it's only for projects using SLW.

  2. the quality of the images that I used for the training of Extraction was not as high as it should have been. OFR was not able to read a text and therefore could not identify as candidates.

  3. most important - I had tried to use "Indicator to find" in the parameters of the analysis. I tried to find the string next to the 'author', so I had to "Indicator to find" and "Author", a Format string and ignore the ': '.

  It worked intermittently at best. I finally changed it to "Find the Format" with a format of ' @[2-100]. This marked all the readable text, and once I have trained a number of images (5 +) including the text to use, OFR can then identify the well field.

  .

  Kind regards

  A

• TestStand 2012 Newbee question: How do I pass a string to a VI to TestStand to control the flow of sequence?

  I want to use a drop-down list box (or a similar control) in a VI to select from a list of strings to direct execution in TestStand.

  • How connect the channel selected in the combo box at the output of the VI Terminal so I can see it in TestStand?
  
  
  • What should I use as 'value' in the parameter module TestStand to retrieve the result of that VI?

  I tried "wiring" the result of the drop-down list box directly to a terminal of output without success.

  I tried "wiring" the exit from the drop-down list box to a wire string variable then this variable to an output without success Terminal.

  (see attached files)

  Can someone give me an example of a VI that allows you to select from a list of strings: {'Bob', 'Mary', 'Bill', 'Jennifer',...} using a

  (or similar) drop-down list box control and routing of the string selected to the output terminal?

  Also, how to reference this (result) setting within TestStand?

  It is a simple task and there can be only one solution TestStand, I'm looking for a simple direct execution sequence by the operator to select a string in a list.

  I studied this problem, but could not find instances of the digital comparisons or string canned and did not find a generic model that would return a string to a VI to TestStand result.

  Thank you for suffering through this fundamental question.

  David

  Melbourne, Florida

  Marco beat me but here is my interpretation. TS 2010, LV 2011

  Also, look at the example of demo which comes with TestStand: C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 2010 SP1\Examples\Demo\LabVIEW\Computer Test of the motherboard

  Demonstration should be a version of what you want.

  See you soon,.

• Extract XML question

  Hello
  
  I have the XML code below in a table (configbom) that has a column (DATA) that is XMLTYPE. I try to extract the value of State via SQL in SQLPLUS like this:
  
  
  SQL > Select extract(data,'/ConfigBomRequestResponse/ConfigBomRequestResult/StatusCode') from configbom;
  
  EXTRACT(DATA,'/CONFIGBOMREQUESTRESPONSE/CONFIGBOMREQUESTRESULT/STATUSCODE')
  --------------------------------------------------------------------------------
  
  
  SQL >
  
  I didn't recover. Does anyone have any ideas what I am doing wrong?
  
  Thank you
  Melinda
  
  
  
  < ConfigBomRequestResponse xmlns = "http://swagelok.com/service/tibco/2009/09/03" >
  < ConfigBomRequestResult xmlns:i = "http://www.w3.org/2001/XMLSchema-instance" >
  
  < StatusCode > 0 < / StatusCode >
  < StatusMessage / >
  < BomResults >
  
  < ConfigBomData >
  < allocation_length i: nil = "true" / >
  < cut_length
  i: Nil = "true" / >
  < description > FL UNDER ASSEMBLY < / description >
  
  < part_number > SS-FL4B-C-RF4SA < / part_number >
  
  < quantity_per > 2 < / quantity_per >
  < i: Nile uom = "true" / >
  
  < / ConfigBomData >
  < ConfigBomData >
  
  < allocation_length > 33,84 < / allocation_length >
  
  < cut_length > 33,84 < / cut_length >
  < description > 1 / 4 & quot; TUBE & amp;
  BRAID < / description >
  < part_number > SS-FL4-B-HXX < / part_number >
  
  < quantity_per i: nil = "true" / >
  IN < Glu > < / UDM >
  < / ConfigBomData >
  
  < / BomResults >
  < / ConfigBomRequestResult >
  < / ConfigBomRequestResponse >

  Hi, Melinda,

  two things: first of all, you can set the column in the table by using a table alias. This is necessary because the column is a type of object-orientation that should be treated by a Manager.
  Then, you must pass in the namespace of the element. In otherwise, extract tent to search in the default namespace contains all values at all. As a result, your query should look like this:

  
  
  select extract(x.data,
  
  '/ConfigBomRequestResponse/ConfigBomRequestResult/StatusCode',
  
  'xmlns="http://swagelok.com/service/tibco/2009/09/03"')
  
  from configbom x;
  
  

  Best regards

  Jürgen

• Newbee question: why a RTF model increases the size of the cells on the output

  We are new to BI publisher and work to the conversion of our custom reports to BI Publisher crystal. We currently use PeopleSoft 9.1 with 8.51.12 tools and are about to upgrade to 9.2 next year. Our office of BI Publisher comes bundled with peopleSoft and that our version of BI Publisher Core is 10.1.3.4.1. Then we use Office 2013. I started to look into these reports and found something that I do not understand:

  When you add a simple table to the model, the filling of a field and running an overview pdf size are increased and spacing is added above and below the text. I looked through all the spacing options I know, but can't seem to find where I can change this.

  

  Any suggestion will be appreciated...

  Thanks for the files.

  Data from the xml structure is to have a new line of character as below

  Instead of

  and if the additional lines were added in the output.

  To avoid this, you need to cut the space beginning and end.

  So, to add the syntax like

  and the result will be like this

  

• Newbee question - footer header and menus

  What is the current practice, the best for creating a web site with compatible menus, headers and the feet etc.

  I've read good and bad SSI and Dreamweaver libraries etc and would like to know where the people in the industry to turn to complete such a task.

  I made a very simple site with php, www.canvasdoctors.com , but someone told me that how I did it was exaggerated and not correct.

  I hope that I was clear.

  Thanks for your time.

  Ashley

  According to me, who replied: Server Side Includes.

• How to treat you with button interrupts on the 537 ez - lite

  Sorry for the newbee question, but I'm just familiar with the jury of 537 ex - lite.  I want to use the buttons to cause an interruption and then this interruption with a service code.  What I have to write a separate VI to handle the interrupt, or I can put it in a structure of the event in the vi that I write...?  Finally, I would like to be able to write an event-driven state machine in the fins... In the attachment, I can button scan and as he lights a led, but I would use the interrupt enable and get the number of the button as an event / box pair to do the same thing... How?

  Thanks for your suggestions.

  Hummer1

  Hummer1,

  The call library function Node (COLD LAKE) that is configured to run with the dll works with features that sees what button was pushed on the BF537. You can double-click that and see what dll it points to and what function it interacts with. Since the deployment of resources target shipped you will have to compile the code LV, in C and machine code using a 3rd part of the compiler is just to do the work of generating C for you. You could probably accumulate the feature yourself using just the screw provided but endearing tape in these support libraries is better because you do not have to reinvent the wheel and lots of screws that you would end up with are actually just wrappers for other DLLs.

• Change in gain on the PXI-6221

  Hi all

  I apologize in advance for a newbee question. I recently started to work on the measurement of force in the laboratory of fluid mechanics. We got a load cell 3 - axis with 0.5 mV/V, power per channel, which I hung on SG24, which sits on SC-2345, connected to the PXI-6221.

  As far as I understand, after the signal comes out SG24 unit, it is amplified to 500mV and powered to PXI card, which in turn have 4 possible gains of 0.2V, 1V, 5V, 10V. To keep the resolution as fine as possible, I'd be interested take a +/-200mV gain, which in turn cut my signal more then half but keep a resolution ~ 6.1uV, I like not having the range, my forces expected fall shorter reach.

  The problem is that I can't find neither manual or MAX a way how truly change the gain. If I open MAX > NOR-DAQmx devices > PXI-6221, I see no possibility to change the input voltage. I can see +/-10V in the Test Panel, but if I change to +/-200 m it resets at + /-10, after I close and reopen again.

  Can someone help please on this issue?

  Thanks in advance

  Hi Chris,

  You made my day )

  Thanks a bunch!

• Find a point of file and project name.

  Suppose I have a comp with a layer containing an apple.png. Now, I would like to replace it with orange.png. To call replaceSource(), I need to provide a point of newSource:

  App.Project.Item (index) .layer (index) .replaceSource (newSource, fixExpressions)

  My newbee question is how to navigate to orange.png if my project structure looks like this:

  -Comps

  -Solid

  -Photos

  -fruit

  -apple.png

  -orange.png

  -lemon.png

  I guess that perform looping through all elements of project and verification of the name of the item would work, but is there a smarter way to do it?

  Looping thought the collection of project items is the best way to do it. You can just do a simple function that you can provide a file name as argument. This way it'll be easier to call whenever you need an element.

• Disable the debug log

  Nice day.

  Newbee question: recommendation for the main image (for linked clone pool) to turn off the mode agent debug log like this:

  1. Open Regedit
  2. HKLM\Software. VMware, Inc. \VMware VDM
  3. Entries of REG_SZ:
     1. DebugEnabled = False
     2. TraceEnabled = False

  But there is no such key in regedit. Should I really create their "VDM ...\VMware" or "...\VMware VDM\log"? Or do I disable debugging through «...\support.bat loglevels"? And how do I know that debug really extinct?

  Thank you.

  Fix. Simply create registry entries.

  Linjo

• Capture several layers of application on a virtual machine

  Another newbee question. I'm following the VMware Horizon Mirage App layer v4.0 capture guidelines on page 9 where he describes the process if you are going to use a virtual machine, so you can capture several layers of app. I followed steps 1 - create own reference machine, install Client Mirage and centralize the unit to a CVD of reference; 2 take a snapshot of the State of cleanliness; 3. in the MMC, use the launch App layer Capture (actually called Capture App layer in the commune of assistants, unless I'm mistaken) option... Here's where I hit a roadblock. Unit is a CVD of reference, the wizard takes me to select from pending devices, and I can't access the device but it is located in the area of reference CVD. The virtual machine itself also appears in Devices.Do assigned I must withdraw from somewhere? I'm confused !

  To capture an application tier, you must have 'reference' machine in a wait state. To capture a base layer, you must have the machine of 'reference' centralized as a reference machine. It's a little confusing. You can use the same machine to capture both types of layers. You can remove the reference CVD of inventory and it will appear in the expectation of devices.

• Java User Exit - file header could not be parsed tokens

  I get an OGG-01389... The file header could not be parsed tokens.  File/u01/pump/aa000000, offset last 916, data: 0 x 394: < 256_char_alpha_num_omitted >

  The doc for OGG-01389 has just:

  Cause: There was an error during parsing of the header of the track.

  Action: Contact the Oracle Support.

  
  In my log4j, I see that javawriter.c is all com.goldengate.atg. * and the methods he is looking, with a journal entry 'burden of all classes for Java User Exit '.  I also see the following entries of javawriter.c in the newspaper, before any indication of error:

  Loading callback methods

  Call 'main' with JVM options: [blah, blah, blah]

  setProperty: key = JAVACHKPT, value = true

  Mode recovery JAVA

  Verification of checkpoint file

  Checkpoint file does not exist

  Initialized Java writer

  ... then I get the following output... good javauserexit.c log still looking:

  (javauserexit.c:389)  [INFO]: initialized User Exit

  (javauserexit.c:563)  [DEBUG]: User exit: EXIT_CALL_CHECKPOINT

  ... then back to the release of javawriter.c:

  (javawriter.c:104)  [DEBUG]: get_current_time

  (javawriter.c:104)  [DEBUG]: get_current_time

  ... and then failure... from javauserexit.c to the line indicated:

  (javauserexit.c:885)  [INFO]: User exit: EXIT_CALL_FATAL_ERROR.

  ... thinking that this might have something to do with the default values for control points, I tried the following in GGSCI before starting the extract in question:

  GGSCI > alter extracts uePump, extseqno 0, extrba 0

  Modified EXTRACT.

  GGSCI > start uePump

  UEPUMP EXTRACT from

  ... but I get the same failure as above.

  Earlier in the paper, I see that all following to goldengate properties are set by default, since I don't have values specified for them... should I? :

  GoldenGate.UserExit.rawchars... by default false

  GoldenGate.UserExit.buffertxs... failing to PAHO

  Prefix file control point value: userexit_

  ... Default GoldenGate.UserExit.includebefores to true

  GoldenGate.UserExit.noignorerecs... by default false

  GoldenGate.UserExit.NOOP... by default false

  GoldenGate.UserExit.nosend... by default false

  GoldenGate.UserExit.nosendcols... by default false

  Thanks for any info / advice.

  Too bad.  I've been 'accidentally' 'old' outdoor from srcDb exttrail and causing the pump remote extracted rmttrail.  Given that the CBC was built by the GG default 11.2 format (because it's the version of GG executed there on the DB server), extract pump that ingestion of my exit from user has also been the11.2 format remotely.  Just added the '11.1 format liberation' to the exttrail source and re - rinse my OGG-0138 and everything goes.

  Sorry for the noise!

• Debugging Javascript in Dreamweaver CC

  Hello

  This certainly sounds like a newbee question but here, it will:

  Say I start a new site. I only have one page so far: a Javascript file. I've name it wawascwipt.js. Nothing else. No HTML5, no CSS3, not nothing.

  I want to be able to debug or check my calculations from my code of wawascwipt.js with some sort of console or debugger.

  How the hell can I do in Dreamweaver CC?

  Thank you.

  Dreamweaver displays syntax in code view javascript errors, but it does not include javascript debugging. There are many development environments that include javascript debugging tools.

  You can use the Firefox plugin firebug for javascript debugging. Chrome also comes with a javascript console. You will find under Tools.

  According to Ken, you need an HTML page to launch the script.

• Check if a variable type is Object [] and only Object []!

  Hi all!
  
  Maybe that's a newbee question but a similar situation never happened to me before!
  
  I have a method that accepts an object [] parameter.
  But the peculiarity of the method, it's that I need to check if the type of the given parameter actually is Object [] only !
  
  Say that any other type of table must return false after checking... as a String [], [number] or something else...
  
  For what I know "* instanceof Object [] * ' always returns true , because all classified inheredit of the object (except the table of primitives, which actually cannot be passed as an argument here).
  So, how do I get false if the type of the given parameter is not exactly "* Object []?"

  Patcha wrote:
  (What is it?)

  A sound that I would express when I'm confronted with a question, I have not yet met before :) The lack of verbal contact, I am trying to communicate through the written word. Wrong, I might add.
  >

  private String method(Object[] o) {
       return o.getClass().getSimpleName();
  }
  

  System.out.println(method(new String[]));
  

  This would mean 'Object []' or 'String [] '? I'm not sure.

  Yes. But it was my first crack at it until I realized the best solution.
  >

  or check the class itself of course.

  array.getClass () .equals (Object [] .class); >
  This seems more comfrotable... I should test.

  I did, it works ;)

  But in fact, maybe I'll use another approach to logic in the mothod (which is not the one I posted as an example).
  So perhaps I should not more control of the object [].

  Excellent, if you can avoid having to carry out inspections of type I would certainly go for it.

• Make a PDF of the selected pages?

  Newbee question...

  How to make a PDF of a "range of sequential pages" of a large InDesign document. When I go to 'Export', I don't see an option to select a range of pages, only the whole document. Is it possible to export a range of pages from an InDesign document to PDF?

  File > export > [enter the filename] save > the following dialog box is where you specify the range of pages.

  Place commas between hyphens for consecutive and non-consecutive pages numbers.

  for example, 1,3,10 to print pages 1, 3, and 10 only. 1-10 to print pages 1 to 10 inclusive.

  It will be useful.