extract previews, when the source is lost

Similar Questions

• which method is called when the screen has lost focus but stays on blackberry?

  Hello

  I want to know in which method is called when the screen has lost focus, but always visible BlackBerry?

  For example, a screen is in the foreground and we disply dialog box so that the screen is visible but not to focus, therefore, at this time that methos called when we close this dialog box?

  Please, help me please please

  Override the following methods in your class to screen according to your needs

  1. when the screen button to the stack

  Call

  onDisplay() or

  onUiEngineAttached(boolean attached) - so attached is true then your screen is at the top of the screen

  2. When you are in a backlight and the lcd screen turns off to your state of rest and turns on again when you actively use this form

  call

  onVisibilityChange(boolean visible) - if visible is set to true, then you get the focus when the lcd display turns

  3. when your application moves to the background by clicking the red end button (i.e. without quiting the app, yet yours is active in the background)

  call

  onExposed() - when your application comes to the foreground of the background or during any type of screen that is in the top get popped

  & call

  onObscured() - when your application moves to the background, or when a screen pushed above your current screen more

• When the phone is lost

  If the phone is lost, the password change account would disable the phone with the old password to connect and send location data?

  Yes.

• Concerned about data security when the iphone is lost

  My friend had lost his iphone and has implemented "Find my iphone" before it happened. There was therefore nothing to fear in what concerns the security of data that was on the lost iphone.

  I recently bought a new iphone so I decided to play and experiment. I erased my old iphone via 'Find my iPhone' in icloud. As soon as I turned on the old iphone, everything was erased. What a relief! Then I plugged this same old iphone on your desktop with a recovery of iphone software and all my photos and contacts, etc. have been recovered! Now, I question the safety of this function - it is not a foolproof method to ensure the security of our data when lost or stolen phones is that?

  Lock activation and to locate my phone are perfect security mechanisms. Period. None have access to your device if locking activation is enabled. iPhone becomes a useless brick for the flight or the person who steals / finds your device.

  https://support.Apple.com/en-us/HT201472

• How to decrypt previously encrypted files when the certificate is lost

  I've already posted a question and received a response. I would now like to make additional comments on what I said in my previous question. Maybe I used the wrong term and said "my computer crashed." In fact the computer has successfully started as always, so I restarted for some reason, but this time, he was able to start, displaying "NTLDR is missing". Press CTR + ALT + DEL is not started the computer. I have do not reformat the hard disk, but simply to insert the CD of the OS to set up the operating system on the existing system. As part of the implementation, I did inadvertently in my name, when asked "who uses this computer" so I became a Director. In the previous original set-up the built-in administrator is the only Director; my name appeared as a user. Now when I check the local users in the Computer Management Console the built-in Administrator, the only Admin previously, and myself ERHAN KARABEKIR are displayed as properties for each user and users lists each of the two as a member of administrators. I want to come is I think I hope the previous built-in administrator could somehow be recovered. Am I too optimistic? Today, I disconnected to switch users, hoping that the built-in administrator would appear as a user so that I could open a session to be able to decrypt the files and folders encrypted. Unfortunately, he did not show I've been to ERHAN KARABEKIR, my present administrator account. Previously, the administrator displayed in users in the Panel was 'Administrator' and the guest account, without any name. I bought the computer with an operating system already installed. Now, my name is displayed as "administrator of the computer. Sorry for the long explanation.

  If you are lucky enough to make the administrator account is the original account whose profile includes the certificate required to access the encrypted files, then simply connect to your computer as 'administrator '.  You will not be able to see the administrator account on the logon screen if you have created another account.  To connect as an administrator, when you get to the login screen, hit Ctrl-Alt-Del twice.  You can then type "Admin" in user space and the password in the password space and log in as an administrator.

  Good luck
  JW

• How can I stop Winodws 8 music to move to a low volume, when the focus is lost?

  When I play music through Windows 8 music metro App, it falls to 20% volume when I do anything else on my system. For example, I'll start playing some Nightwish, go see my mail and the music will be 20% in volume.

  The only way that to work properly, it seems to me is if I have the music app line up on one of my monitors (I have three) and use only desktop applications. If I touch any application metro except for the music, the music will be reduced to a low volume.

  I've been running Windows 8 on my laptop (screen only) for a while now and do not experience this problem. Would it be because of multiple monitors?

  I'm really at a loss because the only other fault I have with experience is not having a list of music being downloaded when you download something from Xbox Music - its almost perfect.

  It was the first thing I tried, and it has not changed the behavior of the application.

  However, I have noticed there are updates available for the included applications and after you apply the update on the implementation of the music (I had to reboot for updates to be applied, although it's telling me to do), the music app is more exposed its tendency to decrease its volume while running in the background.

• problem viewing on XP sp2 when the source is a flash drive

  I have a SanDisk 16 GB flash drive, with several stored movies.  Try to watch the movie on my laptop (Acer) and can hear the sound but no picute/video? All that it shows are the skins.  Thank you

  If they are be XviD .avi files... you probably
  need the XviD codec.

  This can be checked by using the free software GSpot:

  Download GSpot
  http://www.free-codecs.com/download/GSpot.htm
  (left-click the text: "Download GSpot")
  (on the next screen...
  left click: 'Download [GSpot 2.70]')

  You don't have to install it... just unzip the file and
  GSpot.exe left click to launch.

  GSpot Codec identifier
  http://www.headbands.com/GSpot/download.html

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  XviD Codec
  http://www.xvidmovies.com/codec/

  XviD FAQ
  http://www.xvidmovies.com/FAQ/

• When the connection is lost and order expires an unhandled exception is thrown, pt 2

  Initially the question was already asked here, but it is already archived... A bug was already open and is followed with #18336207 #18331763.

  Managed ODP Driver Release 3, beta 2 was released last week and the bug persists. This fix will be included in the final version? Is it possible to expedite this fix (f.e. opening a case of pension)?

  The bug can by reproduction the following TestMethod:

  //18336207 : MANAGED ODP.NET PROVIDER THROWS UNHANDLED EXCEPTION
  //18331763 : COMMAND TIME OUT CAUSES UNHANDLED EXCEPTION
  [TestMethod]
  public void UnhandledExceptionWhenConnectionIsLost()
  {
      object unhandledException = null;
  
  
      AppDomain.CurrentDomain.UnhandledException += (sender, args) =>
      {
          unhandledException = args.ExceptionObject;
      };
  
  
      string connectionString = TestEnvironment.IntegrationTestUtilities.OdpDatabaseConnectionString;
      const string commandText = @"BEGIN
  DBMS_LOCK.sleep(10);
  END;";
      try
      {
          using (OracleConnection connection = new OracleConnection(connectionString))
          {
              connection.Open();
              using (OracleCommand command = connection.CreateCommand())
              {
                  command.CommandText = commandText;
                  command.CommandTimeout = 5;
  
  
                  Task fakeNetworkTrouble = Task.Run(async () =>
                  {
                      await Task.Delay(TimeSpan.FromSeconds(2));
                      //we won't take down the network for the test cases - closing the connection is enough...
                      connection.Close();
                  });
  
  
                  command.ExecuteNonQuery();
                  fakeNetworkTrouble.Wait();
              }
          }
      }
      catch (Exception ex)
      {
          Console.WriteLine("This exception is ok ... : {0}", ex.Message);
      }
  
  
      //You likely won't get this far as the unhandled exception brings the runtime down...
      if (unhandledException != null)
      {
          Assert.Fail("Still happens : {0}", unhandledException);
      }
  }
  

  Although the Bug 18336207 is still in status "80 - pronounced internal development QA/Fix" - it seems it has been fixed in the final version 3 (v4.121.2.20141216)
  (at least I can't reproduce anymore).

  Thank you

• Auto DataGrid refreshing when the source of the XML file changes.

  I'm new to Flex2 and tried to look everywhere, including this forum, but I don't always have it clear.
  
  I want to auto-refresh of a DataGrid control that contains an XML data, whenever the XML file changes.
  I read something about data binding, but still the dataGrid control is not data refresh.
  The program should display data in real time all the time.
  
  I use HTTPService to connect to the XML file.
  
  I do not know that this is not the first time requested, so if you could me link to a site, or another post, that would be great.
  Thanks for any help,
  
  ######################
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < mx:HBox
  ' xmlns:MX =' http://www.adobe.com/2006/mxml '
  Width = '100% '.
  Height = "450".
  creationComplete = "memosSv.send ()" >
  
  < mx:Script >
  <! [CDATA]
  Import mx.collections.ArrayCollection;
  Import mx.rpc.events.ResultEvent;
  [Bindable]
  private var memos: ArrayCollection collection;
  private function memosHandler (event: ResultEvent): void {}
  Memos = event.result.memos.memo;
  }
  
  []] >
  < / mx:Script >
  
  < mx: states >
  < name mx: State = "memoCuerpo" >
  < mx:AddChild position = "lastChild" >
  < mx:Panel width = "342" height = "402" layout = "absolute" title = "Contenido Del Memo" >
  < mx:TextArea
  x = "10" y = "10".
  width = '304 '.
  height = "342".
  cornerRadius = "10".
  Editable = "false".
  Selectable = "false".
  .Contenido Text = "{MEMOS.getItemAt (dgMemos.selectedIndex)}" fontSize = "12" / > "
  < / mx:Panel >
  < / mx:AddChild >
  < / mx: State >
  < / mx: states >
  
  < mx:HTTPService
  ID = "memosSv".
  ' URL =' http://222.222.221.225/distefanoRIA/memos.xml '
  result = "memosHandler (Event)" "
  showBusyCursor = "true" / >
  
  < mx:DataGrid
  dataProvider = "{memos}".
  width = "301".
  sortableColumns = "false".
  ID = "dgMemos".
  a click = "currentState ="memoCuerpo"" >
  < mx:columns >
  < mx:DataGridColumn width = "190" id = "columnaTitulo" dataField = "titulo" headerText = "Titulo del Mémo" / >
  < mx:DataGridColumn id = "columnaFecha" dataField = "date" headerText = "Date created" / >
  < / mx:columns >
  < / mx:DataGrid >
  
  < / mx:HBox >
  ##################

  Here is an example:
  http://www.CFLEX.NET/showFileDetails.cfm?ObjectID=560

  Tracy

• How to edit images of intelligent preview using external editors (PS, NIK and Topaz) with the source is disconnected?

  Is it possible to use an external editor on a preview image smart when the source file is disconnected?  Advice welcome.  Thank you in advance, DW

  In general, it is better to wait that the source of the photo file is back online to change via the external editor - for this reason, the options for external editing are disabled.

  That said, if you can't wait too long (for example you are traveling and you want to download would be a Topaz or Nik copy on the web before returning home), then here's how you can change a smart preview outwardly, in such an "emergency":

  * Download and install MiscLrScripts (free, written by me).

  * Select the photos with smart thumbnails.

  To call "import Smart Previews' script.

  * Change in... (as you would for any photo online).

  Just be aware: be you editing a file dng with reduced loss of ground and changes will be NOT transportable to original photo when source file returns online.

• How to make a text box appear in a PDF file in InDesign CC when the cursor rolls over another area of text?

  I'm doing a text box appears in a PDF document in InDesign when the cursor of the user hovers over an another textbox, and I want it to disappear when the cursor moves off the coast of the first text box. I tried the following with adjustment of various, and it does everything just for me.

  Display a different button on turnover

  You can create a hotspot in which clicking or mousing over an object contains another object. To do this, create two buttons, hide one of the buttons and use the show/hide button action to show and hide the button target.

  • Create an object to use as the "source" button. In the buttons Panel, click the icon of the object to convert to A button.

  • Place the image you want to use as the button target and convert it to a button.

  • Select the target image and select hidden until this that triggered at the bottom of the Panel buttons.

    The image must be hidden in the exported document that can be displayed when the "source" button is clicked or wriggle on.

  • Click the source button and create two different actions, one for show the image target and target the other to hide the image.

    If you want the image to appear when the mouse is over the button source, use events on Roll Over and On Roll Off. If you want the image to appear when you click on the source button and disappear when you release, use events on a click and release. In both cases, use the show/hide action buttons to show or hide the target button. See the interactive buttons.

  • Use the Preview Panel to test the buttons.

  Should work...  On your last point (not 12?) I get the feeling that you have exported your doc as Adobe PDF (Print)? You must instead use (Interactive) Adobe PDF...

  

• WMM edition error message - ' cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. »

  I made a movie of 30 minutes or more in WMM, some of the videos that I imported I had to convert to wmv, to import into WMM. Once I went to publish the movie, after the publication of about 1%, an error message pops up saying something like "cannot publish to the specified location. Check the source files and the location is still available and that there is enough disk space. "I have 8 GB of free space on my hard drive and I tried to burn a cd on a dvd, and save to memory stick, none of them have worked, the same message is displayed even if they have sufficient space available. There is no red x in the videos or photos that I imported, so no files are missing. Some files have been moved when they were converted, but the movie plays well in WMM.  I want to export to is in my documents is therefore always available. I spent hours trying to figure this out and I I still don't know what the problem with it! Help! I've also spent a lot of time to their conversion to avi to see if this helped and the same message appeared again.

  What is the format of your source of debtor files and how did you convert
  TO WMV?

  I can only imagine that you are using Vista Movie Maker 6?

  It's not really about the location... error messages can be very cryptic...
  The error that you mentioned usually appears when the source files in the project
  are damaged or are not fully compatible with Movie Maker and made
  in a movie file cannot continue. In addition, large complex projects can cause
  in this issue.

  In some cases, it may be possible to record in DV - AVI, during registration as
  . WMV fails: the following article explains how to save... Publish it in film...
  6 machine and the graphic link shows where the option:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  If the recording as long as DV - AVI fails... see the following articles:

  Movie Maker - problem resolution - "cannot record a movie.
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Windows Movie Maker error
  Cannot complete the Save Movie Wizard
  http://moviemakererror.blogspot.com/

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  Sometimes, it can help if you are going to... Tools / Options / Compatibility tab...
  and uncheck all filters.

• Media Player 12 losing library when the external hard drive is disconnected.

  I have all my music from an external hard drive. If the hard disk is on and I have Windows Media Player 12 to scan the drive, he built the library very well. However, I do like to keep this external hard drive on all the time so I must say Media Player to stop monitoring the disk in order to disconnect and power off. The problem is, the next time I reconnect the drive for music, I open the media player and the library has disappeared. I make sure that the reader always connects with the same drive letter, so it can't be the problem. Is it possible to keep all the information in the library when the hard drive is not connected to the pc. I'm sure that I was able to do this with previous versions of media player.

  WMP12 does not store the music files. It stores only the location of the files. If you are using a temporary drive, files disappear when the source goes away. The only solution for this is to put the files on your disk or hard drive connected all the time.

  To store your files on your hard drive in a place where the player plays automatically, go to the icon of (i.e.: C:\users\ ) when the folder opens, there is a folder named My Music. It is one of the files that WMP reads.

  If you don't have room on your hard drive to store all of the music, you can choose a few favorites or turn the music on your hard drive. You can just leave it to refill whenever you connect the WMP player.

• Query metadata ODI to find the source and the target table for Interface

  Hi Experts,
  
  Customer heading there source of EBS 11.5.10 in R12. They are BIApps ODI. 7952 version. Since then, all mappings there are customized they may not disturb on support of Oracle BIApps is concerned.
  Now, we need to know how many ODI mappings there source EBS is the 11.5.10 in R12 migration and we can only target mappings accordingly.
  
  So, please give me with entries below:
  
  (1) any request for metadata that will give me the information of the source tables table and target them in against an if-same interface that the source of the main interface is another interface.
  (2) what are the other stuffs that I need to look at from the point of view of the mapping changes when the source is upgrading.e.g. only change the source table is enough or I need to focus on other animals. I feel she's boiling down to create a separate source for R12 adapter.
  
  Kind regards
  Snehotosh

  First open the designer-> models and check which model has got the mapping of the eBS. Get this code with this TERRIBLE application

  SELECT count (distinct i_pop) of SNP_POP_COL
  where I_POP_COL in
  (
  Select i_pop_col in the SNP_POP_MAPPING where i_source_tab
  in
  (
  Select i_source_tab in the SNP_SOURCE_TAB where i_table in)
  Select i_table in the SNP_TABLE where I_MOD in
  (select i_mod in the SNP_MODEL where mod_name = "PUT_HERE_YOUR_NAME")
  )
  )
  );

  Will not consider some other influence (i.e. the procedure), it will be an indicator of average first level.

• Don't know the source table space to use in REMAP_TABLESPACE

  11.2.0.2/Solaris 10
  
  We have a dump expdp of a related development scheme. We had dropped the source DB. Now, we want to create a new scheme in a new DB using this dump. We do not know the storage space used by the schema of the source as this DB does not exist today.
  
  To find the storage space used by the schema of the source, I can go ahead and impdp and cross errors "tablespace does not exist" in the log file impdp (need to do some research on Google to create an awk for this script)
  But y at - it another way to determine the storage space used by the schema of the source when the source database no longer exists? We do not have the expdp log file is (currently looking for it)

  I see 2 options for you.

  1. run your grep sqlfile import and then that file for the keyword TABLESPACE. This will give you all the tablespaces to be used when ordering import.

  2. start your import but with these:

  keep_master = master_only y = nom_du_travail y = my_master_only

  This will load just the main table, and then you can query the master to find storage space. If your dumpfile is important, it can be a lot
  faster than sqlfile once the import is complete, do a query like this:

  SQL > connect schema_running_job/password
  SQL > select unique object_tablespace from my_master_only where process_order > 0 and duplicate = 0;
  SQL > select unique object_name from my_master_only where process_order > 0 and duplicate = 0 and object_type = 'TABLESPACE ';

  I hope this helps.

  Dean

  Published by: Dean WINS 12 Sep, 2012 10:22