extract the contents of the field

Similar Questions

• extract the names of waveform plot

  Hello

  Is it possible to extract the field names from a range of waveform to a new array that contains the names of the plot.

  Kind regards

  If you use the types of waveform data to update your plot, then you can iterate over all channels and remove the name attribute or,

  You can use a loop For who uses the terminal portion to drive the property "Active Plot" of the indicator, then pull the name using a second (preferably an extended property node) and let the names pile up in a tunnel exit for automatic indexing.

  Ben

• HOW TO EXTRACT THE CONTENT INTO RECOVERY?

  Hi all

  I use HP Pavilion 5vt. My laptop is composed of 3 partitions: C, D and E (what is disk backup.).

  I decided to get my laptop to the initial state of the plant. However, before I receovered, I copied a folder of my own - no HP factory - e software (I didn't know that the E partition could not be reached). Then I successfully recover my laptop.

  The problem is, my own folder software disappeared, even if the partition of size E again proved existence of this file. When I clicked to E, no there wasn't a warning appeared which said that "this partition must not be delete alter.

  I'm not good in IT: this is why, I really need your help to extract the folder I was stupidly cut and paste for before E.

  I highly appreciate your help.

  Best regards

  Hello

  I guess the recovery procedure has recreated the E:\ partition and the folder you are looking for is no longer exists.  As you probably know, D:\ and E:\ partitions may not be changed.

  If you want to check, a utility to find files, folders, etc is called Commander free of charge, on the link below.  It displays the files that the operating system normally hides and has a search function.

  http://www.SnapFiles.com/PHP/download.php?id=107872&a=7122339&tag=601108&loc=10

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip , which can be used to open it so that you can run the Setup program.  Run the program and select the drive E:\ in the toolbar to display the content.

  Best wishes

  DP - K

• Question of feasibility: extract information from the fields to the PDF format

  I explore options to collect answers to a PDF form.  Fields of entries by the user are created, the user saves the form in PDF format and sends the return form.  The data entered by the user entered in the fields can be retrieved electronically?  I hate the very idea of renewing the data entered by the user to get it in electronic format.  For now, the question is ' is it possible - extract the entries by the user of the data in an electronic format?  If possible, then I can begin to explore the format, etc.

  It is worth noting since you stevat from the outset that it may be problematic to rely on email. Much better to send the form just like an HTML form. This needs a professional web programmer to provide web scripts, however. Also PDF forms do not work on some browsers and phones.

  It is easy to assume that the big trick is to design the form. But it's just the 10% above the water. Personally I wouldn't consider PDF forms more due to browser issues. Same Adobe move to a dynamic conversion to HTML forms then why don't no start with a? There is full form service providers that provide tools to collect and analyze. For example forms of Google - create and analyze surveys, free.

• JavaScript to extract the second line only a field of text as a PDF?  Is this possible?

  I have a PDF form created in Acrobat DC.  One of the fields is a for the name and address multi line text field.  The user between that info with carriage returns in a field named the plaintiff that ends in a format such as:

  Name

  Mailing address

  City, State Zip

  I need to extract JUST the second line of this field to complete another field of text with these data.  So, my second text field called StreetAddress and would automatically extract only the second input line in the text field named candidate.

  Is it still possible?  If so, can someone give me an example of how this can be accomplished?  I don't want to ask the applicant to each line of input in separate fields.

  Of course, it is possible. Use this code as the "StreetAddress": custom calculation script

  var fullAddress = this.getField("Applicant").valueAsString;
  var lines = fullAddress.split("\r");
  if (lines.length>1) event.value = lines[1];
  else event.value = "";
  

• Get the content of the field "Annotation" of a virtual computer

  I can get the content of the field "Annotation" in the tab "Summary" of a virtual computer using the .notes property.

  Think the contents of the field as:

  First line

  Second line

  Fourth line

  Fifth line

  In this case, the .notes property returns a single string.

  Looking inside the string I get I see the contents of the first line, a HEX '0A' character, the content of the second line, another character HEX '0A' and so on.

  How can I get the content of each individual line?

  Concerning

  Marius

  One solution is to cut the string as = $b $a.Split([char]0x0a)

  Then read the lines simple as $b.item (n) beginning with index 0. $b.count returns the number of lines.

  André

• JavaScript to remove the contents of the fields based on the checkbox disabled

  I'm writing a java script to delete the contents of the fields when a checkbox's checked to disabled.  I have a java script to fill in the field when the checkbox is enabled (which works perfectly).  But in the case where the user accidentally checks the field and wants to uncheck the box I would like the content of field that were initially filled from the first java script to be removed/disabled.

  Here is my code:

  Mouse Up Script for the checkbox (function() {}

  Do something if this check box is not selected.
  if(Event.Target.Value==="on") return;

  Copy the values from text previously filled in those other fields.

  getField("AP_Unit").value = Null;
  getField("AP_StreetAddress").value = Null;
  getField("AP_City").value = Null;
  getField("AP_Province").value = Null;
  getField("AP_ZIP").value = Null;
  getField("AP_Country").value = Null;

  })();

  Sorry it works... that make three equal signs "=" means?

  Here is my code

  If {(event.target.value==="Off)"}
  getField("AP_Unit").value =("");
  getField("AP_StreetAddress").value =("");
  getField("AP_City").value =("");
  getField("AP_Province").value =("");
  getField("AP_ZIP").value =("");
  getField("AP_Country").value =("");

  } else {}

  getField("AP_Unit").value = getField("HO_Unit").valueAsString;
  getField("AP_StreetAddress").value = getField("HO_StreetAddress").valueAsString;
  getField("AP_City").value = getField("HO_City").valueAsString;
  getField("AP_Province").value = getField("HO_Province").valueAsString;
  getField("AP_ZIP").value = getField("HO_ZIP").valueAsString;
  getField("AP_Country").value = getField("HO_Country").valueAsString;
  }

• Hide the caption only when the content of the field is empty for an Adobe form field

  Hi all

  We try to hide only the caption of a field if the content of the field is empty.

  (a) the following code allows you to hide all cru (the entire field including the legend). What we should change the code to hide the legend?

  -------------------------------------------------------

  If (this.) RawValue is nothing)

  {

  This.Presence = "hidden".

  }

  -------------------------------------------------------

  (b) another option would be to use the conditional formatting-> change of text in the caption to the text color white, if the content of the field is empty to make it invisible on print.

  Are there options available ALD or code that must be used to achieve one of the options above?

  Thank you in advance!

  Kind regards

  Roy

  Modify the script to:

  If (this.) RawValue is nothing)

  {

  xfa.resolveNode("this.caption.value.#text").value = "";

  }

• Why is the contents of a field to fill in missing?

  I enter data into the fields to fill and save the document in pdf format. I sent it to someone who opens with an iPhone or iPad and the content of the field is not visible.

  Hello

  Did you send your form as an attachment to e-mail?

  It is highly unlikely that the e-mail recipient opened your PDF form in Apple Mail on an iPhone or an iPad.

  Please note that overview of Apple Mail doesn't show data form or annotations (Sticky Notes, highlighting, Freehand, drawing, etc.) in a PDF document.  This is the limit in Apple Mail, iBooks, and Safari.

  You can request the email recipient to install Adobe Reader for iOS and use the function "open" to open it in Adobe Reader.

  Please take a look at the section of the FAQ documents for instructions on how to use 'open '.

  • For iPad, How to open PDF documents in Adobe Acrobat Reader for iOS (iPad version)
  • For iPhone, How to open PDF documents in Adobe Acrobat Reader for iOS (iPhone version)

  Please let us know if you have any additional questions.

• Content of fluid from the field adds an empty page

  I have a several page form. Pages 2-4 are lists of text fields which some have hidden field that appear when necessary. Text fields are surrounded by subforms and the whole page is a Flowed subform. Everything works well.

  However, when the content of page 2 moves down on page 3, which was 3 becoming a page 4 and page 3 is now mainly a blank page. Is it possible to have the fields in the page 3 come down only the amount of space required will rather a brand new page?

  Thank you

  MDawn

  Thank you for leading me to the Palette of the object. The "allow page breaks in content" has been selected. However, I found if I selected the paging tab and from the DataSet if you need pagination, I selected to the following content area, that solved the problem.

  MDawn

• Problems while extracting the hours of the Date field

  Hi guys,.
  
  We hope that you do well.
  
  I am facing some problems during extraction of the hours of the date field. Here is an example of my orders table:-
  
  Select * from orders;
  
  Arrival time of Order_NO product name
  1 computer Office November 20, 10 10:10
  2 November 21, 10 17:26:34 portable
  3 22 January 11 printer 08:10
  
  Earlier, it is stated that the daily number of orders take place in the roll of the order, I used to write a query
  
  arrival_time > = trunc ((sysdate-1), 'DD')
  and arrival_time < trunc ((sysdate), 'DD')
  
  The above query gives me yesterday how many orders have been been held.
  
  Now I have the new requirement to report on every 4 hours the number of orders will be held. For example if the current time is 08:00 IST then the query must extraction from 04:00 until 08:00 how many orders took place. The report will take place at 12:00 IST which will give me an order took place from 08:00 until 12:00.
  
  The report will be run every 4 hours per day and generate report of orders taken place for the past 4 hours. I have a programmer who will run this query every hour, but how to understand to get the order at the request of details who arrived for the past 4 hours. I'm not able to do this using trunc.
  
  Can you please help me how to make this happen. I checked "Extract" also, but I am not convinced.
  
  Help, please.
  
  Thanks in advance
  Aalami

  try something like

  with testdata as (
    select sysdate - level/24 t from dual
    connect by level <11
  )
  
  select
    to_char(sysdate, 'DD-MM-YYYY HH24:MI:SS') s
  , to_char(t, 'DD-MM-YYYY HH24:MI:SS') t from testdata
  where
  t >= trunc(sysdate, 'HH') - numtodsinterval(4, 'HOUR')
  
  S     T
  19-06-2012 16:08:21     19-06-2012 15:08:21
  19-06-2012 16:08:21     19-06-2012 14:08:21
  19-06-2012 16:08:21     19-06-2012 13:08:21
  19-06-2012 16:08:21     19-06-2012 12:08:21
  

  trunc (, 'HH') truncates the minutes and the seconds of the date.
  Extract the hour only works on timestamps
  concerning

  Published by: chris227 on 19.06.2012 14:13

• Clear the contents of a field to open

  Hello
  
  I want to erase the contents of a field when you open a file of the form. So, this field will be filled by the user name, V ('APP_USER'). He comes to display the user who has edited lately recording.
  
  Does anyone know how to do this? The field will be updated only if it is empty to begin with so I need to delete the contents of the field, that if you press the 'Save' button and then replace it with the current of the connected user.
  
  Thanks in advance,
  
  Kind regards
  
  Steve Welch

  The most appropriate place for me would add a calculation on the page sent.

  Who should be?

  Scott

• Alignment of the contents of the fields in Acrobat

  How to align the content of the fields which are arranged one above the other in the columns for example, a column of numbers? Currently when I insert a text field in Acrobat it automatically centers the content I want to do the right hand digit in each field to be aligned to the right of the field.

  On the Options tab of the properties of the field of a field dialog box, set the alignment to the right. You can select several fields at the same time to change this setting for them all at once.

• Help needed to extract the pipe-delimited fields in a CLOB data type

  Hello
  
  I had a table with clob field as indicated below.
  

  CREATE TABLE TRANSACTION_INFO
  (
    TRASACTION_ID  CLOB,
    LOG_ID  NUMBER
  )
  
  Insert into TRANSACTION_INFO
     (TRASACTION_ID, LOG_ID)
   Values
     ('354502002020910|000000610214609663||09/27/09 08:02:37|RNEW|DC25|MOTOROLA|8802939198', 123);
  Insert into TRANSACTION_INFO
     (TRASACTION_ID, LOG_ID)
   Values
     ('354599892020910|000000610214609663||09/27/10 08:12:47|SOLD|DC23||8802939198', 456);
  COMMIT;

  As you can see the field Clob is a pipe delimited data. Now I'm able to extract the first two fields using the below querry. But it may be the right solution as
  SUBSTRING function fails if there is lack of character in all fields.
  Also when there is a null value in all the areas, how can I be able to get as a null value? Basically, I want to get the values in a defined way.
  
  How can we achieve this?

  Select Substr (TRASACTION_ID, 1, Instr (TRASACTION_ID, '|')-1) field1,
          Substr (TRASACTION_ID, 17, Instr (TRASACTION_ID, '|')+2) field2               
    From TRANSACTION_INFO;
    
  
  output should be like as shown
  
     FIELD1          FIELD2          FEILD3                 FEILD4
    
  354502002020910     000000610214609663                  09/27/09 08:02:37
  354599892020910     000000610214609663                  09/27/10 08:12:47

  Thank you
  Rede

  SQL> with transaction_info (trasaction_id, log_id)
       as (
   select '354502002020910|000000610214609663||09/27/09 08:02:37|RNEW|DC25|MOTOROLA|8802939198', 123 from dual union all
   select '354599892020910|||000000610214609663||09/27/10 08:12:47|SOLD|DC23||8802939198', 456 from dual union all
   select '|000000610214609663||09/27/10 08:12:47|SOLD|DC23||8802939198', 456 from dual
  )
  --
  --
  select trim(regexp_substr (trasaction_id, '[^|]+', 1, 1)) f1,
         trim(regexp_substr (trasaction_id, '[^|]+', 1, 2)) f2,
         trim(regexp_substr (trasaction_id, '[^|]+', 1, 3)) f3,
         trim(regexp_substr (trasaction_id, '[^|]+', 1, 4)) f4,
         trim(regexp_substr (trasaction_id, '[^|]+', 1, 5)) f5
    from (select regexp_replace(replace (trasaction_id, '|', '| '),'^\|', ' |') trasaction_id from transaction_info)
  /
  F1                   F2                   F3                   F4                   F5
  -------------------- -------------------- -------------------- -------------------- --------------------
  354502002020910      000000610214609663                        09/27/09 08:02:37    RNEW
  354599892020910                                                000000610214609663
                       000000610214609663                        09/27/10 08:12:47    SOLD                
  
  3 rows selected.
  

• Copy the contents of several fields of text to the Clipboard

  I work in Flash Builder and Catalyst CS5 generation of a project that will help technicians to find easily the policies and instruments. An area that I want to concentrate on is the section Notes. I do want the user to enter text and then have a 'Notes copy to Clipboard' button which will collect all the data from these fields and store them in the Clipboard. This way all the agent has to do is to paste in the note appearing on their service ticket.

  Here is an example of the fields he would need.

  • Name:
  • Phone number:
  • Question:
  • Symptoms:
  • Troubleshooting notes:

  I also want the label of the text field to be included in the notes. So when someone sticks the notes, it is not only the content, but will include the name of the area of text as well. "Telephone number: 555-123-4567" instead of just "555-123-4567".

  I hope this makes sense guys! I'm not that experienced with Flash!

  This should get you:

  import flash.desktop.ClipboardFormats;

  var a: String = "name: John Doe;
  var b:String = a + "\n" + "phone: 555-1212";

  Clipboard.generalClipboard.setData (ClipboardFormats.TEXT_FORMAT, b);