F10 - create video DVDs from the recorded TV show

Similar Questions

• Cannot create an excerpt from the DVD - unspecified error. What can I do?

  Trying to create a DVD from windows DVD creation.  When I try to listen to excerpts, video the error screen appears: unspecified error.  What should I do?

  Hello

  ·         Were there any changes made to your computer until the problem occurred?

  ·         What version of Windows is installed on your computer?

  Reference: http://windows.microsoft.com/en-US/windows7/help/which-version-of-the-windows-operating-system-am-i-running

  I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.

  Method 1:

  Try to change Windows DVD Maker DVD-Video settings and check.
  Reference: http://windows.microsoft.com/en-US/windows7/Change-Windows-DVD-Maker-DVD-Video-settings

  Method 2:

  Check if the audio and video filters are causing this issue.
  Reference: http://windows.microsoft.com/en-US/windows7/Video-filters-in-Windows-DVD-Maker-frequently-asked-questions

  Also, please take a look at the article.
  Solve problems with creating a DVD-video using Windows DVD creation
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Method 3:

  Clean boot your computer performance.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to set the computer to start as Normal mentioned in step 7 in the above article.

  Method 4:

  Try to perform a SFC scan on your computer and check to see if that fixes the problem on your computer.

  Click on the link below and follow the instructions in the article.

  http://support.Microsoft.com/kb/929833

  Use / scannow command from the command prompt.

  Note:

  ·         You must be logged on as administrator to run sfc.

  ·         /scannow: Scans all protected system files immediately.

  ·         If sfc detects that a protected file has been replaced, it retrieves the correct version of the file from the %systemroot%\system32\dllcache folder, and then replaces the incorrect file.

  If the %systemroot%\system32\dllcache folder is corrupt or unusable, use sfc/scannowto repair the contents of the Dllcache directory.

  Provide us additional information, as appropriate. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?

  I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?  I just want to make a new trailer for the project.

  What you suggest is possible but it takes software and third-party quality loss.

  Instead, export a QuickTIme movie. If you have a choice of codecs, choose Apple Intermediate Codec. You can save it where you want it-maybe in the movies.

  Then import the movie into FCP as a clip.

  Good luck.

  Russ

• How to create a DVD from Movie Maker?

  I have the Windows live movie maker, which came with my new PC, but I can't find any way to burn a DVD.  How can I download this ability?

  Original title: Movie maker on a DVD.

  Hello

  Please follow the steps in the link below to create a DVD from Movie Maker.

  Burn a DVD-video using Windows DVD Maker disc

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

  You can also go through the steps mentioned by J to volunteer for more information.

  Windows Live Movie Maker-how burning the project to DVD for playback on TV

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Live-Movie-Maker-how-to-burn-project-to/dd8d264f-69f7-41A7-B67B-5eeeb9ad41b6

  You can also post your queries to the Windows Live support for more information.

  Movie Maker Portal

  http://windowslivehelp.com/product.aspx?ProductID=5

  Hope this information is useful.

• How to add a video dvd to the Windows Media Player library

  Add video dvd library for the video

  I have the same problem as new user, trying to get my video dvd in my video library so I can burn DVDs.  Is there a dvd in Windows Media Player or Windows DVD burner do? It has been suggested that he download a cd burning software.  I thought windows already have this software.  I'm totally lost, the instructions do not seem to work.

  I have the same problem as new user, trying to get my video dvd in my video library so I can burn DVDs.  Is there a dvd in Windows Media Player or Windows DVD burner do? It has been suggested that he download a cd burning software.  I thought windows already have this software.  I'm totally lost, the instructions do not seem to work.

  ================================
  Win 7 includes software for copying DVDs.
  Windows DVD Maker can create a video DVD
  clips, photos and music files, but this is another
  process.

  The freeware... CDBurnerXP can be used to copy
  Home made DVD.

  "" CDBurnerXP: how to copy a home made DVD ".

  First copy of DVD VIDEO_TS folder on your desktop.
  (or to any folder you choose)

  Now you will need some software. The free software CDBurnerXP
  may be worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  CDBurnerXP
  http://www.CDBurnerXP.se/
  (works on XP, Vista, 7)

  The following article explains how to burn the VIDEO_TS folder
  on the DVD.

  CDBurnerXP: Create a video DVD
  http://CDBurnerXP.se/help/data/create-video-DVD
  (scroll down to: video DVD burning)

  Here is a copy of the steps:

  ===
  CDBurnerXP - video DVD burning
  Start CDBurnerXP, select a new data disc.
  Go to 'File'-> "Vidéo DVD Layout" in the menu.

  Now select the folder that contains the video
  DVD files and select "Create image film.

  Now burn the disc as you normally would.
  You choose, in order to finalize the disc.
  ===

  That should do it...

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Media Center cannot detect the error DVD Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD into the drive

  Original title: why Windows Media Center does not detect my DVD?

  I built my computer motherboard ASUS P658D, Intel i7 processor clocked at 2.6 gHz, 12 GB RAM, 750W Corsair PWR. power, Windows 7 Home Premium 64 - bit & ie9. When I put or the other two DVDs in one of two DVD players, Windows Media Center appears and when I click on "Play DVD" Media Center give me a window that says:

  "Windows Media Center cannot detect a DVD in the DVD - ROM drive. Insert a video DVD in the drive." Two DVDs, I've tried are educational for DVD

  my Nikon D300 Digital camera and a family video DVD or both these very well play in a bed of same computer running Windows 7 Professional 64-bit, & ie8.

  I tried Microsoft Fixit, no help. I tried to send Microsoft Support, and I got NO HELP. I did not bring any changes, and installed any program, just

  scoured the internet. A DVD player is a Sony Optarc with Microsoft Driver, the other is ASUS. I also tried to use Windows Media Player but nothing

  rises or it returns me to Windows Media Center and it does not detect to play either of my DVD. How can I get help here, or from Microsoft? Thank you.

  No, there is no yellow warning in Device Manager and the device manager says that two DVD players work properly. Mr. Fix it's

  automated download from microsoft that is supposed to automatically fix some problems, but he provided no help here. I think it is more likely

  that there is a problem with Windows Media Center or Windows 7 Pro 64 bit and either of my two new Sony DVD drives

  and ASUS.

  I thought my way in a solution. My thought was: Device Manager indicates DVD players work properly and both are new and we're Sony, and the other ASUS so I think only an unlikely problem with readers. The problem is with Windows Media Center "do DETECTED is not the DVD. So there must be a problem with Windows Media Center. I thought that I might need to reinstall Windows 7... then I thought that maybe if I just reinstall Windows Media that will work. He did. My problem was:

  Start > Panel > programs and features > features on or off Windows activate > then uncheck the box for multimedia functions > restart the computer > and then re-check the box to restore the multimedia features > now both discs play both DVDs, I tried. Both disks are operating normally. Reinstall the characteristics of media Windows 7 resolved the problem. Thanks to all who offered solutions.

• Create a path from the pen with an action

  I can't record an action that create a path from the pen. You have an idea to solve?

  Thank you

  Marco

  With active use of the path enter the path of the menu actions panel flyout.

• U2414H DisplayPort 1.2 STD Set Up - monitors will not get video Signal from the graphics card during start or restart

  * What specific Dell monitor? 2 two U2414h monitors with MD214 - package of multi-monitor support
  * What specific model of computer, desktop/laptop? Workstation HP xw8400, Intel Quad Core Xeon CPU E 5335 @ 2.00 GHz, 4.00 GB of memory
  * What operating system? Windows 7 Professional 32-bit
  * Which video card? AMD over-pants V3900
  * Which ports are available for the video card? DisplayPort 1.2 STD, Dual-link DVI
  * Which video output from the video card port video on the port monitor do you use? Output Mini DisplayPort Display port in
  * What cable are you using to set the video card to the monitor? Adapter DisplayPort to MiniDispayPort - we came with every Dell monitor
  * You use the Dell supplied cable? Yes - two monitors

  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. This resolution should match the resolution of the default monitor. The two monitors: 1920 x 1080, 60 Hz

  * Brief description of the problem monitor? Monitors have been implemented following the instructions on page 25 of the Dell online manual to connect the monitor to function DP multi-flow (MST). DisplayPort cable is connected to V3900 output MiniDisplay port DisplayPort graphics card in the 1st U2414H; second DisplayPort cable is connected to the DisplayPort on 1 U2414H monitor output and MiniDisplayPort in the 2nd monitor U2414H. Dell U2414H drivers have been installed from the CD provided and both recognized by Windows. V3900 graphics card Driver is up to date with the EyeInfinity software. Source of input on both monitors the Mini Display Port value. Display settings on both monitors Display Port 1.2 value activate. Resolution of the screen on Windows 7 shows: (a) two separate Dell U2414H (mini Display Port) screens, with each resolution 1920 x 1080, multi (b) displays the value "to extend these displays. The two views work with Setup leading up to and acknowledged by the graphics card.

  Problem 1 - all the time - monitor power buttons are lit, the computer is turned on, then monitors lights don't - they show 'Power save mode' and then turns off. To hit the power button on the computer to shut down Windows. Only way to get these on monitors is unplug cords from the back of each monitor, wait a few minutes, plug in the power cord, start computer and then both monitors will start up and sign of windows to the screen will appear and monitors will work. Normal operations for a full day of work if you do not restart. If you need to restart during the day (like when you get a software update), the same thing happens. Start the computer to restart, but the monitors come back on not and remain dark. There is nothing wrong with the graphics card V3900. He is certified by AMD and DisplayPort.org to work in an environment of STD DisplayPort 1.2. I had previously two 215tws Samsung SyncMasters connected to each output V3900 Grahics card and they work very well in extended mode for years until a SyncMaster 215tw started shaking like crazy. A SyncMaster has been connected to the out display with a dongle and a DVI cable Port. The other SyncMaster was connected to the DVI output on the graphics card. So I decided to buy these two U2414Hs. Technical support Dell after many phone calls and e-mails finally advised me that there is a problem of "compatibility" between my computer and the U2414Hs and recommended that I return the monitors. On the web site of the U2414H AMD has not been certified by AMD to work in a DisplayPort 1.2 STD Set Up. Other former Dell monitors are certified by AMD to work in the Display Port 1.2 Setup. DisplayPort.org lists the U2414H to work with Display Port (it does not say that it will work in a DisplayPort 1.2 Set Up).

  Problem 2 - shift perceptible in the entrance of Microsoft Blue Tooth keyboard and mouse and PS2 Keyboard and mouse. All the drivers are up to date. When you type a phrase, it takes a few moments for the text displayed on the screen using a keyboard. Both the mouse connected and the Bluetooth mouse are unresponsive sporadically for a few moments until they finally react. It happens regularly during the day. The monitors provide excellent clarity when you work. The stand is ideal for office property. Before these monitors are returned if no one knows what causes these two problems and does anyone have a solution? Should I stop using the Display Port 1.2 and hang them using HDMI with active dongles? If I have to return these two U2414Hs, I considered the 2 two U2413s. Someone at - it all opinions on the last U2413s from Dell? I have read some real problems with ghosting that I just haven't the time for more. The remanence correction in the models of U2413 sold in 2014? There are very few monitors on the market with Display Port in and out to the back to support DisplayPort 1.2 STD Transport.

  Thanks for any input.

  I had to remove my VGA HDMI DV card and now the DP (display port) works very well. Don't need to use a HDMI cable. Display Port 1.1 is reported as the problem in order to remove the card solves this problem.

• My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

  My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

  There is a lot of noise from speakers as well.

  Disable the hardware accelerator or install flash player 10.

• Picture disappears from the record after a reboot.

  Original title: WHAT CAUSES PICTURES TO MIGRATE

  Windows 7 Pro: make sure that the image is in the right file. Come back next day & I do a search because it is no longer in the original file. I'm the only person who uses this computer. I heard the complaint from others, but no solution.

  Hi Gardner,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, as this image disappears from the record after a reboot.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.

  Did you the latest changes on the computer before this problem?

  I suggest you to run the fixit and check if it helps.

  Diagnose and repair Windows files and folders problems automatically
  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with the photo, I'll be happy to help you. We, at tender Microsoft to excellence.

• Message from blackBerry Smartphones: the page you requested was created using data from the form.

  While closing a link to expedia.ca a message come to say: the page you requested was created using data from the form. This page is no longer available.  If you resend the data, any action that has been specified by the form will be repeated.  You want to resubmit the data?  When I click Yes or no, nothing happens except that the message just reappears.  I can't get rid of it so I can't do anything else on my phone, except to answer a call if someone calls me.  How can I get rid of this message from my phone?  I tried to turn it works... even by leaving off the coast for 5 minutes before turning turn it back on.  I can't even check my OS because I do not what anyone on my phone.  I hope someone can help me with this.

  Have you tried a battery pull?  This should fix a problem as you described.

  With your phone, remove the battery, then replace a minute later.  This will do all sorts of wonderful things to your phone for free unclaimed memory, delete no cited source points and make your phone run smoothly.

  Try it and let us know if it does the trick.

• What is the best Adobe application to create mobile applications from the "ground up"?

  What is the best Adobe application to create mobile applications from the "ground up"?

  This might be useful:

  WEB - how to choose the best tools for your project

  • Adobe Dreamweaver is mainly for professional website developers who live and breathe the programming or for designers and project managers who have learned enough HTML at ease. Even if there are a lot of models and tools of environmental Designer, the major attraction of Dreamweaver is how it offers full access to the code, with immediate feedback (through a split screen) what look like the results. The same content can be published for a desktop browser or mobile devices like the iPhone, iPad or Android smartphones.
  • Adobe Muse is a new tool mainly for graphic designers who want to create and publish Web sites without writing code. With a cooked graphic design interface, Adobe Muse generates the HTML to publish directly to the web. Muse sites can be hosted on the hosting platform integrated Adobe Business catalyst or transferred to a third party hosting provider. Adobe Muse includes widgets, which are built features such as slideshows and albums, that you can drag and drop on the pages of the site. However, Muse currently does not support the development of sites that target mobile devices, like the iPad, iPhone and Android smartphones.
  • Adobe Edge, currently public preview on Adobe Labs, is used to create web animations. The files it produces are usually added to a Web site using a tool such as Dreamweaver. The beauty of the edge, is that animations are based on the latest standards open such as HTML5 and CSS3. With no plug-ins needed, animations work on the latest PC and Mac browsers as well as mobile devices, where the Flash technology is not universally supported.

• How to create a DataControl from the Java file

  How to create a data from the Java file control

  Hello
  Try like that after the example, you will get the answer

  1. Create Page.java

  public class {Page}
  private String pageName;
  private String pageAction;
  public Page() {}
  Super();
  }

  public Page (pageName, pageAction String String) {}
  Super();
  this.pageName = name of the page;
  this.pageAction = pageAction;
  }

  {} public void setPageName (String pageName)
  this.pageName = name of the page;
  }

  public String getPageName() {}
  Returns the name of the page;
  }

  {} public void setPageAction (String pageAction)
  this.pageAction = pageAction;
  }

  public String getPageAction() {}
  pageAction return;
  }
  }

  2. create PageList.java

  import java.util.ArrayList;
  import java.util.List;

  public class PageList {}

  private pages = new() ArrayList list;

  public PageList() {}
  Super();
  pages. Add (New Page ("Page title 1", "page 1"));
  pages. Add (New Page ("Page title 1", "page 1"));
  pages. Add (New Page ("Page title 1", "page 1"));
  pages. Add (New Page ("Page title 1", "page 1"));
  pages. Add (New Page ("Page title 1", "page 1"));
  }

  public void setPages (list of pages ) {}
  This.pages = pages;
  }

  public {list getPages()
  return pages;
  }
  }

  3. right click in the PageList.java and choose CreateDataControl

  then refresh the DataControl and focus on which a DataControl as PAgeList will be created

  Kind regards
  Felix

• Create a USB from the recovery CD recovery provided - SOLUTION

  You don't have to buy and CD/DVD external for use provided recovery CD. I guess you all have access to a computer with a CD player. Also, you can buy a 2 GB USB flash memory.

  Using any other computer with a linux or win OS - insert the CD and create the image of this CD .iso file using any application of CD/DVD writer provided. If you use Ubuntu or linux in general, you can use of Brasero CD/DVD burner. Once in the Brazier, choose Copy CD/DVD and in the drop-down menu, select image file. Brasero will create the .iso image file and save it on your hard drive in GNU as file brasero.iso.

  If you prefer to use the terminal / shell to create an iso file enter these commands:

  sudo umount/dev/cdrom

  DD if = of = file.iso / dev/cdrom

  Now we have created the image file and is sitting on the hard drive for you. Now we must create a USB bootable from this image. To do this, download Unetbootin from the link below. It is available for linux and win.

  [http://sourceforge.net/projects/unetbootin/]

  Once you have downloaded Unetbootin, you insert the USB memory (it takes 2GB). Launch Unetbootin. Now the option select the second option - iso image and browse to the location of the file on your hard drive and click Open. Below select the usb - slot Linux key something like/dev/sdb1 or/dev/sdc1 - usually it is the name of the drive selected automatically by Unetbootin.

  Click on apply or Ok. the bootable USB key will be created in a few minutes. Once it's done insert in your Toshiba NB 100 and press F12 to start the netbook, a menu option will display - select USB device and press ENTER.

  Now the machine will start and menu start Unetbootin will show - recovery SELECT, then press enter and follow the instructions - and you'll be all set. No need to spend extra money for an external CD drive.

  I tried yesterday and works like magic. Good luck.

  -----------------

  Post edited by: Admin

  * This procedure does not work correctly! *

  Please follow the instructions created and validated by the user * boandlkramer *.
  Here is the link to the site:
  http://www.georgkainzbauer.de/gtkdb/index_7_544.html

  Best regards
  Admin

  Hay Karloss

  10 points for you! If you have any tips more useful, you're welcome.
  Thank you

• Qosmio G50-12 q: no audio signal while moving the video files from the camcorder

  Hello

  I have a portable PC Toshiba Qosmio G50 - 12 q with 640 GB HARD drive, and equipped with 4 GB of Ram saw the Completed window system upgraded to the version of service pack 2

  I connected the video camera Sony PC 115 to the PC via the I.Link IEEE 1394 cable while that I import a video to Window Movie Maker in order to save it.

  At the moment where it is reproduced in the form of Movie Maker, I see the video reproduced the video camera but don't feel no audio. Then when I'm done for import video I want and he always see in Movie Maker, the program reproduces regularly or video he recorded or the audio exactly I didn't think it was important while it.

  It ' is usually?

  Working group than in the phase of import that I would have to see and feel or the audio video. Task not is defective cable because when I see the video recording in Movie Maker I feel also the audio base, means that the audio has left the video camera, is entered into the PC via the I.Link recorded it.

  To the point, I can hear the audio in the phase of transfer / import video or any other audio device from the camera / video, I have to in case of change inside of Window Movie Maker or the window given some details of formulation considers also the I.Link Jack specifically?

  Or the cable is connected between the video camera and PC with purpose there details? Even if it seems to me have connected well it boom ' as I have said, l "audio is saved."

  Thanks and greetings

  I have Sony camcorder DCR-TRV520E and in the past, I recorded several movies on my laptop.
  I used the Ulead Movie studio application and everything was OK.

  10 minutes ago that I tested it with Windows Movie Maker (Vista) too. Here a few facts:
  -My cam Sony is recognized correctly
  -Started Windows Movie Maker and chose the option IMPORT > digital video camera
  -Traveled in the right folder
  -On the next stage of the single application started rewinding videotape
  -Importing video has begun only and when finished I checked it and the sound was there.

  Later I chose the option "publish on" > this computer and after 20 minutes it was all over.

  I just use the firewire cable. Nothing special.
  I really don't understand what's wrong there.

  East - the first time do you it?