f60cgi entry still on my context file

Similar Questions

• My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files. How do I take the old bookmarks if there is no backup?

  My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files on the old drive. How do I take the old bookmarks if no backup exists, or has been completed? Does not save bookmarks of FireFox auto? If, then what is the file name and where is normally stored by FireFox?

  In fact, it can be easier...

  If you have the old drive connected as, say, drive E, go to:

  E:\Users\username
  

  Then click in the address bar and paste it after this and press ENTER to open it:

  \AppData\Roaming\Mozilla\Firefox\Profiles
  

  Normally, you have only one file, which has a random string followed by "default." In this case, click on this file and find the subfolder bookmarkbackups.

  If you find multiple profile folders, look inside to find the most recently updated backups.

  To restore the backup files, see: restore bookmarks from a backup or move them to another computer

• context file

  Hi all

  in 12.2.2 on Oracle Linux 6

  where contextfile CONTEXT_NAME.xml created by AutoConfig?

  Thank you.

  Hello

  Nom_du_contexte is generated based on the name of the instance and the name of the server.

  Try "echo $CONTEXT_NAME".

  If you want the context file, just run the following command in the apps or db level and it will show you the location of the full path to the file:

  echo $CONTEXT_FILE

  Kind regards

  Bashar

• 12.2.3 cloning - y at - there a step I'm missing? There is no patch file system context file

  Hello

  Following the steps in note # 1383621.1, I can successfully clone and start the target system. When the clone is finished, the patch file system is empty (I do not see anywhere that told me to copy the side patch, that is an error on my part?). So I guess I would need to do 'adoption phase = fs_clone' on the target after the clone, but it fails with the message

  
  

  Context file system PATCH file: /u01/oracle/PTCH/fs1/inst/apps/PTCH_jmisfindev/appl/admin/PTCH_jmisfindev.xml

  ERROR: File not found specified context.

  I'm missing something, can anyone point me in the right direction?

  Thank you very much

  -Adam vonNieda

  I found the steps that I missed, do not take into account...  Just need to RTFM a bit closer...

• My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

  My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

  My lightroom was great before the crash to work and I have a lot of work still pending.

  You will need the catalog file and all your images. If you have also stored your images on which crashed HDD you will need to copy them as well.

  The default location of the LR catalog file is in your user name folder in the folder on the ROOT of the drive users

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• Will be opmn.xml of updates to automatic configuration with the context file?

  Hello
  
  If I make a few changes in the context file in the section < oacore_jvm, and running the auto-configuration service.
  
  To update file also contained opmn.xml wirth for context file?
  
  -Thank you

  If I change what opmn.xml this change will be temporary. Such as running autocinfig crush him.

  Fix.

  So if I want to make this permanent value I need to change in the right context (*.xml) file?

  Correct, then run AutoConfig then.

  Thank you
  Hussein

• Hi there, I need to be able to read the raw files on an Olympus Stylus 1 via CS5 and Lightroom 4.  I downloaded Raw plugin v 6.7.1 file but still cannot read the files.

  Hi there, I need to be able to read the raw files on an Olympus Stylus 1 via CS5 and Lightroom 4.  I downloaded Raw plugin v 6.7.1 file but still cannot read the files?

  Read this http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html table

  The Olympus Stylus 1 was first supported Camera 8.3 crude which is compatible with the CS6 and CC.

  It is not compatible with CS5 or more and never will be.

  If you do not upgrade to CS6 or CC, then you can dwonload the free Adobe DNG converter, convert all Stylus 1 Raw files to DNG, and then edit the DNG in CS5.

  Camera raw, DNG | Adobe Photoshop CC

• How to remove the old context files after upgrade to R12.1.1

  Hello
  
  I upgraded 11.5.9 (DB 9.2.0.4) to 12.1.1 (DB 11.2.0.2).
  
  In the application manager under automatic configuration menu, I noticed that I have 4 files of context: 2 DB level and 2 for the Application Tier. Two of them are apparently old 11i system. How can delete them so I have two listed on this page. I have to add custom settings. When I tried to do it wrong by saying 'Customization is not permitted on the different versions of the configuration files.'.
  
  Thank you
  Sinan

  Make sure that none of the old context files are available on the servers (delete), make sure also that you have entered right in the FND_NODES table.

  For the error you get, please see these documents.

  Create a custom setting does not work - customization is not allowed on the different Versions of the Configuration [762590.1 ID] files
  CUSTOMIZATIONS NOT PERMITTED ON DIFFERENT VERSIONS OF THE CONFIGURATION [351969.1 ID] FILES

  Thank you
  Hussein

• What do the following entries in the following configuration file?

  What do the following entries in the following configuration file?
  Thank you
  < include > coherence-pof - config.xml < / include >
  < allow-interfaces > true < / allow interfaces >
  true < subclasses allow > < / subclasses allow >
  

  <?xml version="1.0"?>
  <!DOCTYPE pof-config SYSTEM "pof-config.dtd">
  <pof-config>
  <user-type-list>
  <!-- coherence POF user types -->
  <include>coherence-pof-config.xml</include>
  <!-- com.tangosol.examples package -->
  ...
  <allow-interfaces>true</allow-interfaces>
  <allow-subclasses>true</allow-subclasses>
  </pof-config>

  -L' allow-interfaces to indicate if the class name of the type of user can specify types of Java interface in addition to the Java classes. Valid values are "true" or "false". Default value is false.

  -L' allow-sub-classes element indicates if the user-name of the class type can specify a type of Java class which is abstract, and whether subclasses of any type of user specified name of the class will be allowed during execution and automatically map to the super class specified for a serializer. Valid values are "true" or "false". Default value is false.

  -L' user-type-list element contains zero or more elements of type of consumer. Each type of user POF that is used must be included in the list-type-user. The item of list-type - the user can also contain zero or more include items. Each includes element is used to add items of type user defined in another pof-config file.

  The include element specifies the location of a pof-config file to load items of type user of. The value is a string of locator (URL or a valid path) that identifies the location of the target pof-config file.

  http://wiki.tangosol.com/display/COH35UG/user-type-list

  http://wiki.tangosol.com/display/COH35UG/POF-config

  Thank you

  Everett Williams
  Team coherence

• Disorder of conversion of databases (PSE8 to PSE14)... psedbtools made me close (?), but I still 3 .psess missing files.

  I spent several hours trying to convert my PSE8 PSE14 database. I followed the recommendations I've seen in the forums and with psedbtools:

  1. Reconnect all the files missing and optimized (in PSE8)
  2. At ran psedbtools and addressed to a problem of serial number of volume (using volumeid.exe) and several missing files (that PSE himself, in step 1, has not set)

  Psedbtools shows still 3 missing files; These are files in my directory of catalog as .psess

  C:\ProgramData\Adobe\Elements Organizer\Catalogs\My Catalog\projects\2010 meeting: Don't Blink.psess

  Note that each of these files contains a colon in its root file name. So I can't still creates these files (in order to 'false' on the conversion program).

  All attempts to convert even the performance:

  

  I have 5000 + photos and video clips in my catalog with a lot of tags. Any help or recommended "next steps" to convert my database would be very much appreciated.

  DonPatt wrote:

  The latest entries in my pse-conversion-log file:

  ...

  index of waldo made cleaning

  Conversion log: finished

  Conversion log: coloured catalogue Original opened. Version of the organizing elements.

  Conversion log: Conversion failed

  I have no PSE8 Organizer open. Is there anything else I need to do to work around this error?

  You can try again after closing your organizer and restart the computer, and then look in the Manager of tasks for services related to the PSE8 and deactivation if found.

  If you try the conversion on a copy of the catalog file with project files deleted from the Organizer, you n ' no risk.

• Host file continues to go back to the original entry.  Impossible to update file host, questions HA

  I installed vsphere4 with a host name and then wanted to change... I've updated the host file, / etc/network and even made a "newhostname hostname" but when I go back to look at the hosts file, it just goes back to the original host name.   HA adds an entry to the host file, which makes me believe that it doesn't.    I restart the network service, the server and it still goes back host name of the i put when I installed the server.  Strangely, when I do the hostname command, I get the correct new host name. but I can only ping the server using the original host name because that is what is in the hosts file.

  any one seen this before? any help would be greatly appreciated.

  Raymond Golden

  VCP3, VCP4, MCSA,Net, was DRY.

  Change of name in vSphere client. All files will be updated automatically.

  ---

  VCP MCSA, MCTS Hyper-V, VMware vExpert 2009, 3/4

  http://blog.vadmin.ru

• BES10: Entry-Point-Name in the file descriptor META-INF/MANIFEST. MF is not valid

  Hello

  We have a Headless, built using 10.3 SDK Blackberry app. It has two parts. User interface and service without a head. We are able to package, sign (using the certificate of the company) and test it on BB 10 devices. Up to now, we use chrome extension 10 BB playbook/App manager to install the application on the device, but today when I tried to publish the App via our system's internal BES10 I get following error.

  • The "Entry-Point-Name" attribute with the value 'Background to the ExampleApplication Service' in the file descriptor META-INF/MANIFEST. MF is not valid.

  It seems that BES10 Server loved point of entry for background service but don't know why? It works fine when download us it via the chrome extension 10 BB playbook/App manager. Attaching sanitize bar - descriptor.xml for reference.

  Yes, it seems that there are limitations on the maximum length of the name of the application when published by BES (25 characters). Strangely affecting 'Point-name entry' to less then 25 characters solves the problem.

• Folders and files disappear from libraries, but are still in the original file if watched by digging c:-why?

  When I add a folder to the library he sews it is only a matter of time before the sub folders and/or files such as word documents. It just stop appearing in library view, but are still present in the "Explorer". The Explorer view would be if I'm going to the C: drive and drill down to the original location of the folder/file in question. I use the professional version. My wife has the same problem in its home version of Windows 7. I love Windows 7 but I lose patience with the file system.

  I solved the problem with "hidden" files The answer is a little embarrassing. When I imported my files in W7 in XP they missed to 'sort by date/time. Because they were alphabetically in XP, the order of the new date set match alphabetically on the first import in W7. I didn't know they were are more sorted by name because the order of date / hour now equated the name order. I opened each file the file sort order has changed and it settles at the bottom of the list that is logical, newest at the bottom. It seemed to me that I was lost files because they fell in alphabetical order and moving toward the bottom of the list. Once I clicked on sort by file name everything came back and worked well since. Sorry, I should have posted this a long time ago.

• Isolated from network, but still allow the possible file transfer

  Hello

  OK, here's my question... I was not able to find a way to do the following .iso exception which is a pain.

  I want a totally isolated network and yet the ability to copy and paste files to and from the network isolated.  I know it's a bit unintuitive sounds counter but the model I am looking for is similar to VM Workstation where you can completely isolate VM customers and yet you still have the ability to copy files on the isolated network via 'VM actions' to the host or access to CD-rom/floppy of the host.  This model provides access to files via a different mechanism than the network card.  Director of the laboratory has any means to do the same thing?

  My goal is to create a fully functional domain with DNS, DHCP, Wins, etc and I want absolutely not exposed to the public network, but I'll need to have installed the media files and other files in the isolated network.  Any thoughts?

  This may be exactly what you are looking for however it may be enough to solve your problem. Consider the diagram below.

  Set up your machines isolated on the Green Network (network emulation).

  Set up a gateway machine that affects both networks similar to the 'Router' machine above.

  In your case, the machine that affects the two networks could double as a file server which has planned its actions on both networks. Basically, this is equivalent to establishing a gateway that connects two networks.

  The illustration above came from a library of test that allows us to inject the network latency in a connection. The "Router" machine is a simple CentOS Linux box running Linux, the traffic control (tc) to change the settings of latency on each of the two interfaces Ethernet to the router. In your case, instead of putting a router, you could design your own gateway + configuration of the file server.

  In Windows networks, I also put a VPN router configurations and just used MS PPTP VPN connectivity in the network of "isolated." Both techniques work.