Similar Questions

• What is the problem with the police in Google Chrome? How should I do?

  I use a Toshiba laptop Satellite 2009 that is running the 32-bit version of Windows 7 Ultimate. My favorite browser is Google Chrome. A week ago, I noticed that about 40% of the text displayed in Chrome seems quirky and hard to read, as shown here ---> http://i.imgur.com/uEPcy.png . This question arose from nowhere and persistent since last week. I searched on the internet long and hard for a solution to this irritating problem. I've never seen, heard talk where experienced this problem before. Interestingly, this problem is present in Google Chrome. Safari, Internet Explorer, Microsoft Word and other applications on my laptop never displayed the text in this way. Although I can always start using another browser, which displays the text correctly, I'm asking help and advice because I became frustrated with this problem and because I am very sedentary to chrome. So what is wrong with the police in Google Chrome? How to fix it? I appreciate all help. Thank you.

  1 https://productforums.google.com/forum/?fromgroups#! Chrome/IUbn05Lnq9g/section

  2. http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=95416

  3. http://support.google.com/chrome/bin/answer.py?hl=en&answer=95290

• Firefox and serious problems with the police on the websites bloglike.

  Firefox on my computer has some serious problems with the police on some sites, such as: twitter, tumblr and a few other bloglike.

  Images:
  Twetter / thumblr / other

  Yes, it is more likely a hardware acceleration problem or a problem with the specific fonts (rendering).

  You can do a test of fonts to see if you can identify the corrupted fonts.

  • http://BrowserSpy.dk/fonts-Flash.php?detail=1

  You can use this extension to see what fonts are used for the selected text.

  • FontInfo: https://addons.mozilla.org/firefox/addon/fontinfo/

• faced with the front camera

  When the superior auto mode, you can not use hdr for the rear camera. But faced with the camera before the automatic mode allows you to choose hdr in the settings. Is this a bug problem or software?

  This isn't a bug. Unfortunately, the HDR is not available in this mode. If you want to use HDR for the rear camera, you must use the manual mode.

• Faced with the question to URI on jsp page

  I have a URI on my JSP and I found the tld with jar. JSP and tld has same URI but I get the following error
  
  Error (3.5): no tag library could not be found for this URI. Possible cause could be that the URI is incorrect, or there are errors during the analysis of the .tld file.
  
  In JSP, it looks like this
  
  < % @ taglib uri prefix = "http://xmlns.oracle.com/adf/faces/rich' = 'af' % >
  
  and tld sound like that
  
  tlib < version > 11.1.2.3.0 < / tlib-version >
  < short name > af < / short name >
  < uri > http://xmlns.oracle.com/adf/faces/rich < /uri >
  
  I'll you give more details for my application, see currently, I'm working on the kind of the migration of the thing, my current application is in JDEV TP4 and we use now ADF R1(release 1) jar with the same directory structure, I'm going to migrate my application with JDEV last 11.1.2.3.0 and I need to use the library with this last JDEV R1 not R2 , I tried with R2 I am able to resolve the error, but my requirement is that I must use R1 with JDEV last, and I am facing this error... what approach I need to follow it please suggest me... and also in the IDE, we can add jar from anywhere...
  
  Thanks in advance.
  
  Published by: 982899 on January 20, 2013 22:35

  Hello
  Check project properties > JSP tag libraries.
  more likely is that you have lost the library.

  You can´t use the libraries of adf R1 R2.

• Faced with the question while with ATG Cybersource integration

  Hi all
  
  I am facing problem with address verification while integrating cybersource with ATG.
  Any integration with cybersource is still work correctly.
  
  If I used addressVerificationProcessor VerifyOrderAddresses and mention to use CyberSourceAddressVerify, I get the error associated with the below houseno. box not found
  addressVerificationProcessor = / atg/commerce/payment/CyberSourceAddressVerify
  
  Can someone help me on this please.
  It's urgent. Pls let me know if need more details
  TIA,
  MILIN
  
  Error log:
  
  12:03:01, 992 INFO [ShoppingCartModifier] DEBUG 0 gifts to collect there
  12:03:01, 993 INFO [ShoppingCartModifier] DEBUG add order credit card
  12:03:02, 075 INFO [ShoppingCartModifier] DEBUG error form - stay on the same page.
  12:03:04, 942 INFO [CyberSourceAddressVerify] DEBUG - request-
  12:03:04, 946 INFO [STDOUT] ship_to_state = CA
  bill_state = CA
  ship_to_city = San Jose
  bill_city = San Jose
  bill_country = we
  bill_zip = 95131
  ship_to_country = we
  ignore_avs =
  merchant_id = mykkaushik
  bill_address2 =
  ics_applications = ics_dav
  ship_to_zip = 95131
  bill_address1 = 1, Main Street
  ship_to_address2 =
  client_lib_version = Sun Microsystems Inc./1.6.0_31/Windows 7/6.1/-/Java/5.0.3
  ship_to_address1 = 1, Main Street
  merchant_ref_number = pg460011
  12:03:06, 320 INFO [CyberSourceAddressVerify] DEBUG - response -
  12:03:06, 320 INFO [STDOUT] dav_rcode = 0
  ics_rcode = 0
  ics_rmsg = number of House/box found on the street.
  request_id = 3539115850040180464524
  dav_us_info = S00000
  dav_us_error_info = E421
  request_token = AhijLwSRf7YylSTvL7cYIJ + 1EEDyqAJGlwtJMsXXwMhEAAAA/ED@BGF7'¢
  dav_rflag = DINVALIDADDRESS
  ics_rflag = DINVALIDADDRESS
  merchant_ref_number = pg460011
  dav_rmsg = number of House/box found on the street.
  12:03:06, 364 PipelineError DEBUG INFO [ShoppingCartModifier]: key = InvalidAddress; error = {pg460011 = home
  12:03:06, 367 INFO [ShoppingCartModifier] DEBUG add form exception: InvalidAddress: House/box number
  12:03:06, 367 DEBUG INFO [ShoppingCartModifier] origin of exception: null
  12:03:06, 368 INFO [ShoppingCartModifier] DEBUG Transaction marked as Rollback - redirect to: billing
  12:03:06, 369 DEBUG INFO [ShoppingCartModifier] afterSet sees currentTransaction TransactionImple < a
  nStatus.ABORT_ONLY >
  12:03:06, 369 INFO [ShoppingCartModifier] DEBUG afterSet validation transaction TransactionImple < ac, B
  TUS. ABORT_ONLY >
  12:03:06, 494 INFO [ShoppingCartModifier] DEBUG released the local write lock using id 270000

  There is a problem with the entry that you gave in the field: House / box

  Cybersource error return:
  Home/box number found on the street.

  could you please valid number here who is the number waiting to Cybersource service.

• When I go between words to fix in my message, apparently never with the police who are currently using.

  Original title: fonts

  In the documents, I usually use a large number of fonts, but the problem is when I corrected my message, I'm between words to be corrected, but it never appear in the police I currently use, I have to go to do it manually.

  Here is an example,

  I do it well.

  I want to go between the 'doing' and 'good' to add a 'very', the problem is when I jump in here, I type the word 'very', the 'very' fate another font, it is not the same as the 'practice' and 'well' he pop always some another police, but, please help me solve the problem.

  1 million thanks!

  Hi EdnaSiu,

  1. this happens with all programs or only when you type emails?

  2. this phenomenon only occurs with a specific e-mail program?

  3. If so, the question does not work with any webmail like Hotmail or Gmail or any customer e-mail like Outlook?

  If it's specific to any webmail, you can try to change the font to compose an e-mail to another and check if it helps.

  If you need help change the s parameter in the e-mail program, you may need to contact the courier service provider.

  You may also refer to article and check if it helps:

  Change your font settings

  If you change the font in Internet Explorer, and then see the article:

  Change the colors and fonts used for webpages

• Faced with the installation of XP SP3 and XP SP2 on HP mini 210

  Hello

  I followed the steps on my computer, HP mini 210, which was completely unusable:

  (1) Mini Partition Master tool used to boot the system.

  (2) remove all partitions, including HP recovery and everything.

  (3) create a new primary partition NTFS and label c.

  (4) restart the system with the bootable XP SP3 or SP2 CD.

  (5) Windows copies all the files and go to "Start Windows"

  ((6) I select one) to install a new Windows XP

  After that XP is not able to identify the partition on the hard drive. It says no hard drive detected or something it starts and asks to press F3 to exit.

  I tried to enter F9 at startup, and it does not show the hard disk; I mean that the HARD disk is not damaged or corrupted.

  Can you get it someone please let me know what to do?

  Hello:

  You must integrate the NM10 chipset Sata driver controller that I zipped and attached below, then XP installs fine.

  Info on how to integrate the driver, please read the guide at the link below, read the Intel section, and read the document that is "slipstreaming" all drivers from Intel.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

• Faced with the simple series comms

  Hi all - summer tweak something that should be simple for hours now, so I'll ask for help...

  I have a RS485 device connected to COM5 via a USB adapter, work at 9600 baud, 0,8,1, no - fundamentals of series. I can talk to the device using the terminal software native and even using hyperterminal with the above parameters. It seems obvious, and so I thought that LabVIEW and VISA would connect without too much effort.

  So I use the following simple sequence into LabVIEW:

  -VISA set up the serial port, 9600,0,8,1, none (no error)

  -VISA defined the size of buffer, 4096 with a mask of 48 (no error)

  -Stamps of Ras VISA, the two buffers (no error)

  -VISA write, chain of command is 'PR C2\r\n", which should be echoed and return a numeric value (normally 0)

  -check the bytes to the port property; returns 12

  -VISA read, returns the string of command only, 7 bytes

  why I can't read the full buffer?

  To be honest, I thought that it will work only with a trivial series program: set-read-write. But which still generates an error. I added the size of the buffer since then do a little research and makes without error at least, if not in one of the published examples.

  I don't think it's a matter of time, since I add a lot of late, when I'm debugging, and I tried to put delays read before. The fact that the number of bytes in the buffer is 12 seems to indicate that my answer is here somewhere...

  I also tried a second reading, but it returns nothing.

  Kind regards

  Lamb

  Just disable the tank of the termination.

  This is the reason why you get only one line.

  Or do a second reading at the end.

• Faced with the form validation

  I tried a few days get my code works but I'm not entirely understand error messages.

  I want to do what follows but can't make it work:

  1. validate the fields defined and checkboxes

  2. Enter personalized messages to find errors in a table

  3 display an alert detailing any errors

  If the fields contain data and the checkboxes checked;

  4. save the form in a temporary folder with the name of requisition -' + this.getField("workOrderNumber") //(which contains a javascript script autonumbering)

  5. If all required is supplied attach the form to an email as provided for in the background code

  Event.RC = true;

  msgArray = new Array (errorMsg [0], errorMsg [1], errorMsg [2], errorMsg [3], errorMsg [4] errorMsg [5], errorMsg [6], errorMsg [7]);

  If (this.getField("workOrderNumber").value = "")

  {

  errorMsg [0] = ' you can not pass without an application number, please click in the field to the right top of the page to generate a number. "

  }

  ElseIf (this.getField("DelAddressRow1").value = "");

  {

  errorMsg [1] = 'Please enter the full delivery address;

  }

  ElseIf (this.getField("DeliveryContactName").value = "");

  {

  errorMsg [2] = "Please enter the contact of delivery."

  }

  ElseIf (this.getField("SupplierNameRow1").value = "");

  {

  errorMsg [3] = "Please enter the full name of the proposed supplier."

  }

  ElseIf (this.getField("SupplierAddressRow1").value = "");

  {

  errorMsg [4] = 'Please enter the street number, name and type. "

  }

  ElseIf (this.getField("SupplierAddressRow2").value = "");

  {

  errorMsg [5] = 'Please enter the suburb, State, and postal code. "

  }

  ElseIf (this.getField("SupplierContactName").value = "");

  {

  errorMsg [6] = 'Please enter the name of the supplier contact. "

  }

  ElseIf (this.getField("SupplierContactTelephone").value = "");

  {

  errorMsg [7] = "Please enter the phone number of suppliers."

  }

  else if (msgArray! == "");

  {

  var msgArray = 'there were some mandatory fields, you need to complete...\n ";

  for (var i = 0; i < errorMsg; i ++) {}

  numError = i + 1;

  MSG += "\n" + numError + "". "" + errorMsg [i];

  }

  Alert (MSG);

  }

  on the other

  {

  var cToAddr = [email protected];

  var cReqNum = this.getField("workOrderNumber").value;

  var cSubLine = "request:"+ this.getField("workOrderNumber").value; "

  var cbody = "thank you for submitting your form. \n' + 'save the attachment of the completed form for your records.

  Send the PDF as an attachment to an e-mail

  this.mailDoc ({bUI: true, cTo: cToAddr, bassujetti: cSubLine, CMSG: cbody});

  }

  OK, that makes more sense. The piece of information you miss, it's that the default value of a checkbox when it is not checked (a group or, if none are selected) is 'Off '. Another thing that you're doing wrong is your stop"" command. There is no such thing in JS. If you want to stop a bidding process then it should be part of the script. You can't stop a command to "Submit a form" (not directly, at least, you can stop it by clearing a required field).

  If your code should be something like this:

  if (this.getField("WO").value=="Off") {
      app.alert("Please check a checkbox");
  } else {
      this.mailDoc({cTo: "[email protected]"}); // replace with actual email address
  }
  

• Faced with the hard disk installer...

  Hey, this is my first post.  I tried the trawling through the various forum posts, and other Web sites and videos however I am having a bit of trouble to the where I want to go regarding them have Windows Home Server up and it works perfectly in ESXi.  I have attached a diagram of installation old as running WHS on my HP Server but I wanted to upgrade to WHS 2011, I had and I thought that it is the best time to try virtualization as well.

  I have a physical machine with 3 hard disks.  1 x 250 GB, 1 x 2 TB and 1 x 100GB.  I intend use the 250 GB HD to install my s VM, IE.  WHS 2011 (already completed and running), Linux, XP etc.  However, what I want to do, is when you are logged in WHS, I want to be able to store all my music, photos, media, etc., on the 2 TB drive and to be able to access them in not only WHS, but other BONES as well.  I've read about RDM however, I get nowhere with her.

  On my old configuration, I also had a few runnign programs that would automatically download episodes of TV series for me and place them on the 100 GB hard drive, which was not part of the pool of storage in WHS.  I would then move them manually in the actions concerned.  Basically, I want to be able to do all this in the virtual environment.

  The scene, I am at this time, is that I have esxi installed with WHS 2011 installed on the hard drive of 250 GB.  I can log on and get the WHS Office ETC.

  Can someone help me with this?

  Welcome to the VMware forums communities.

  With the RDM vSphere client are limited to SAN lun.  For a local SATA device, you'll want to use this method - http://vm-help.com/esx40i/SATA_RDMs.php.

• Yet faced with the contact form

  Hey DWers-

  From another thread, I've added form osgood (thanks for posting that). The form appears on the page, but does not work and I do not know because I macerated the code along the way.

  I think it's clashes with the < html > tags existing, but I'm not sure what I can/can ' t get out existing code because it's a little more complicated that I'm used to. It's a delicate design, so I don't want to fix something (e-mail form) and destroy the other (the sensitivity).  I'm ready to knock a Facebook link on the page and say see ya!

  Anyway if anyone has some time, the link is http://www.dirtbikes101.com/contactform.php

  Thanks, thanks and thanks again!

  PS - the error message is

  Internal server error

  The server has encountered an internal error or misconfiguration and was unable to respond to your request.

  Please contact the administrator of the server, [email protected] and inform them of the time, is the error occurred and anything you might have done that may have caused the error.

  More information about this error may be available in the server error log.

  Apache/2.2.3 (CentOS) Server at www.dirtbikes101.com Port 80

• Faced with the difficulty to obtain the logic...

  Hello..
  I have a table called rate that contains...
  
  RATE
  PERKM FROMKM TOKM
  
  0 0 15
  2 16 100
  1 101 300
  
  Now, I want to create a procedure with the distance as a parameter and fareamount as OUTPUT parameter...
  
  I tired logical creation for her... I managed, but whenever a user enters a new record in the table of rates... the logic below does not work...
  
  3 301 400
  
  
  PROCEDURE get_fare_amount)
  v_i_ndistance IN route_master.ndistance%TYPE,
  v_o_nfareamount ON fare_Master
  )
  AS
  CURSOR c1
  IS
  SELECT nrateperkm, nfromkm, ntokm
  OF fare_master
  WHERE v_i_ndistance > = nfromkm AND nactive = 0;
  
  nrate NUMBER;
  fromkm NUMBER;
  tokm NUMBER;
  tot (NO.2): = 0;
  BEGIN
  FOR temp IN c1
  LOOP
  IF v_i_ndistance > = temp.nfromkm AND v_i_ndistance < = temp.ntokm
  -If distance between fromkm tokm n...
  THEN
  IF = 2 tot
  -If total archives digitized is 2... to get the rate and km for previous record...
  THEN
  
  -For the 100 first kms use 2 perkm rate and for remaining kms we 1rs perkm.
  v_o_nfareamount: =.
  (((v_i_ndistance-tokm) * temp.nrateperkm))
  + (nrate * (tokm))
  );
  ON THE OTHER
  v_o_nfareamount: = v_i_ndistance * temp.nrateperkm;
  END IF;
  END IF;
  
  tot: = tot + 1; -To get the number of records
  -To store values of the last record analyzed variables
  nrate: = temp.nrateperkm;
  tokm: = temp.ntokm;
  END LOOP;
  
  Dbms_output.put_line (' Total fare for ")
  || v_i_ndistance
  || "" kms:-".
  || « R. »
  || v_o_nfareamount
  );
  EXCEPTION
  WHEN NO_DATA_FOUND
  THEN
  Dbms_output.put_line ('NO DATA FOUND');
  WHILE OTHERS
  THEN
  Dbms_output.put_line (SQLERRM);
  END get_fare_amount;

  The logic that I gave took:
  -The rate for the first 15 km 0
  -The rate of 2 for between 16 and 100 km
  -The rate of 1 for between 101 and 300 km
  -The rate of 3 km between 301 and 319

  Easy you need?

  your sample data said rate = 0 for the first 15kms and not rate = 2 for the first 100 km as you said later.
  For me, it would be:

  Scott@my11g SQL>exec :nbkm := 303 ;
  
  PL/SQL procedure successfully completed.
  
  Scott@my11g SQL>with fare as (
  select 0 perkm, 0 fromkm, 15 tokm from dual
  union all select 2,16,100 from dual
  union all select 1,101,300 from dual
  union all select 3,301,400 from dual
  )
  select :nbkm nbkm, sum(perkm*(least(:nbkm,tokm)-fromkm)) total
  from fare
  where tokm <= :nbkm
  or (fromkm <= :nbkm and :nbkm<=tokm)
  / 
  
        NBKM      TOTAL
  ---------- ----------
         303        373
  

  373 = (rate0 * (15-0)) + (naturel2 * (100-16)) + (rate1 * (300-101)) + (revenu3 * (303-301))

• Faced with the question to record Photoshop CS3

  

  The registration of photoshop cs3 I think is no longer works, but if you really want to register, go here

  https://www.Adobe.com/sea/products/register.html

  Choose Photoshop the menu drop down and click Go

  We will ask you to sign in, then you will be redirected to a page with any adobe stuff, that you have registered before.

  If you do not see photoshop cs3 already there, at the bottom of the page under Save an older product

  Enter your serial number of photoshop cs3.

• Faced with the question all by merging two variable result sets in BPEL 2.0

  I am facing problem while merging the response of the two variables (operations and list of objects) in BPEL 2.0

  My code snippet is as below:

  <assign name="AssignJobList">
   <extensionAssignOperation>
   <bpelx:copyList>
   <bpelx:from>$InvokeJobDetailsPSGetUpdatedJobObjectsResponse.JobProxyResponse/sfabmabo:Job</bpelx:from>
   <bpelx:to>$MergeJobListResponseMessage.JobProxyResponse/sfabmabo:Job</bpelx:to>
   </bpelx:copyList>
   <bpelx:insertAfter>
   <bpelx:from>$InvokeJobDetailsPSGetEffectiveJobObjectsResponse.JobProxyResponse/sfabmabo:Job</bpelx:from>
   <bpelx:to>$MergeJobListResponseMessage.JobProxyResponse/sfabmabo:Job[last()]  </bpelx:to>
   </bpelx:insertAfter>
  </extensionAssignOperation>
</assign>

  
  

  For CopyList operation, its updates the target variable but for the insert after operation on its merger nor her raise an error.

  Could you please help me in the same.

  Thank you

  Hello

  The above problem can be solved by adding a tag for each operation of bpelx as shown below:

  $InvokeJobDetailsPSGetUpdatedJobObjectsResponse.JobProxyResponse / sfabmabo:Job

  $MergeJobListResponseMessage.JobProxyResponse / sfabmabo:Job

  $InvokeJobDetailsPSGetEffectiveJobObjectsResponse.JobProxyResponse / sfabmabo:Job

  $MergeJobListResponseMessage.JobProxyResponse / sfabmabo:Job [last ()]

  Kind regards