facilities of individual components might not be recognized that SP1 & SP2?

Similar Questions

• Vista updates not defective to install SP1 & SP2

  original title: Vista will be not updated

  I help my neighbor with his laptop Dell 1520 running Vista. She had some problems with IE-7 and I noticed that the laptop has not had a successful Windows at a time update long (do not have SP1 or SP2). I tried several attempts to get the updates to work and finally reloaded the operating system software Windows Vista to factory state - first of the recovery on the HARD drive partition, then a second time since the recovery disks provided by Dell. In both cases, the subsequent updates refused to stick. The first batch of 107 updates downloaded and installed, but then to restart something goes wrong and the system goes into Startup Repair which ends with a system restore. The end result is that many updates end in failure. Never can get past this, even by trying all the updated Microsoft suggested tips (mode boot, security turned off, audit, FixIt, clear temporary files, etc. of disk errors). When I run Windows updates again, I selected 107 updates to be installed again.

  I suspect that I have a HDD laminated, but thought that I would like to ask for help. Any suggestions on next steps?

  Mike T in Virginia

  Hey forum: Got it for update.  Pilots were not common.  Updated drivers and updates started flowing!  Thx for the help,

  Mike T IS

• Error when you try to play the downloaded tracks: Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

  Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file. (((PLEASE HELP)))

  I understand that this has been a matter of repetition and I made the suggestions listed and nothing works. This just started happening, although downloading songs, and once they are finished I'm not able to play them with Windows Media Player. The initial message indicates that the file has an extension that is not recognized by Windows Media Player.

  
  

  I have a Dell Inspiron Laptop with Windows Vista Home. Any suggestions? What should I chahnge how I download and save music?

  Hey Taylor09,

  You may find that you are getting this message in Windows Media Player due to one of the following reasons.

  a. you try to play a file that is not supported by the player.

  b. you are trying to play a file that the player does not support, but the file was compressed by using a codec that is not supported by the player.

  Step 1:

  Confirm that you are trying to play a supported file type. The following article lists the types of files (formats) supported by Windows Media Player.

  Information on the types of media files that supports Windows Media Player

  Note that if you tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Step 2:

  Download the necessary codec to play the file.

  For more information of Codec, see: Codecs: frequently asked questions

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I go to read some files I downloaded (films), I get an error message windows media player cannot play the file the player might not support the file type or is unable to support the codec used to compress the file.what is the answer

  I have windows vista media player 11 ultimat.windows. now, I was told to find the right codec... How do this.and where can I get the right codec from.and will it upset my computer in any way.not computer minded.so please tell me slower.

  Hey,.

  There might be times, however, when you want to read the content that is compressed with a codec that does not include Windows or the default player. In many cases, you can download the necessary codec on the web for free or for a fee. And, in some cases, the player can automatically use the codecs installed by other reading programs and the creation of digital media on your computer.

  If you know the name of the codec or its ID (called a id FourCC for video codecs or a WaveFormat identifier for audio codecs), try the search on the Internet. Often, you can go to the codec manufacturer's Web site to download the latest version of a codec.

  Warning
  Use caution when installing codecs that you find on the Internet, in particular some of the free codec packs that claim to include codecs from a wide variety of companies or organizations. Incompatibilities are known to exist with some of the components in these codec packs that can cause serious playback issues in the player and other players, lead to the corruption of the system and make it difficult for Support from Microsoft to diagnose and solve playback problems. For these reasons, we strongly discourage you from installing these codec packs, and recommend that remove you them if you have installed them and you are having problems with the player. Install only codecs, filters or plug-ins from reliable sources, authorized, such as the website of the official supplier. Even in this case, beware: some codec suppliers offer minimal customer. Before you install the components of digital media, set a system restore point. The restore point to go back to the configuration of your system, if necessary.

  Install codecs may solve the problem in most conditions.

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  $C
  God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• Qosmio F50 - graphics card may not be recognized under 64-bit Windows

  I installed the operating system Windows XP 64 on Toshiba Qosmio F50 - 10K. I have a big problem, because Windows XP does not recognize my graphics card (nvidia geforce 9600 m gt).
  I tried to install the drivers from the nvidia site, but once this graphics card still has not been recognized.
  It causes that, when I try to push and drag a window, I can see how it is re-paint.

  Could someone help me to solve my problem?

  Hello!

  I think that the problem cannot be solved. Toshiba doesn't support any laptop computer with Windows XP 64-bit because it is OS was not so popular.

  The only way I know is to use drivers from external Web sites and update your BIOS to the latest version. If it doesn't work, you must use another operating system.

  I think that the Qosmio F50 is really fast enough for Vista 64-bit. Try it and you will see too much work.

  Good bye

• My ipod 5th generation is stuck by resetting the settings and I tried holding the power and the "home" button but has just the same. Also, I tried to sync it upward, so I tunes but it has not been recognized and I can't answer on my ipod. Help, please!

  My iPod 5th generation is stuck by resetting the settings and I tried holding the power and the "home" button but has just the same. Also, I tried to sync it upward, so I tunes but it has not been recognized and I can't answer on my iPod. Help, please!

  Try the remaining shares of:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Reference any Dell is not even recognizing the camera

  Original title: sony dcr-hc26e
  I have a sony handycam tape camera dcr-hc26e and problem by capturing the vedios.i bought a cable fire for 4 t0 pins 4 pin but my any dell is not even recognizing the camera.if I connect with a usb cable it says no drivers, what can do.

  Hello

  
  If I understand correctly, the camcorder is not getting recognized on the computer. I suggest you follow the troubleshooting steps to check if this may help.
  1. don't you make changes on the computer before the show?
  2. What is the exact error message on the computer?
  3 is the issue limited to handycam?
  4. which version of the operating system is installed on the computer?
  5. the problem occurs on a different computer?
  6. don't you try to connect to a different USB port?
  
  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 2:
  You can update the drivers from the link of the manufacturer and check.
  http://eSupport.Sony.com/us/p/model-home.pl?MDL=DCRHC26&loc=3&session_id=522416127856a5fc52a0797ff81cf207#/howtoTab
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 3:
  You can try the steps in the link and check if works.
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  Note: Also apply to Windows 7
  Please follow the recommended steps and post if you still experience the problem. I'd be happy to help you further.

• Unable to play video file error: Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer

  Original title: Windows Media Player shows that the new codecs are required

  Original title: query codec and Media Player re

  Have used windows media player for many years on my dell. Usually to see the videos from Sony handycam. Just downloaded wmediaplayer and recent videos from Camcorder will not open one of the videos.

  The following message is displayed "Windows Media Player cannot play the file. The player might not support the file type or a required codec may not be installed on your computer. »

  As I have not changed anything helpful suggestions please.

  concerning

  The winemaker

  Hello

  1. What is the format of the video file?

  2. what operating system is installed on the computer?

  Method 1: Run the troubleshooter in Windows Media Player on Windows 7 settings:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: You can check if the file format of the music files are supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player

  Note: If you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Method 3: In addition, you can also download & install the necessary codec to play the files.

  For more information, see: Codecs: frequently asked questions

  (For Windows Vista)

  WARNING of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Media Player error play 3gp: the player might not support the file type or does not support the codec used to compress the file.

  The problem is that Windows Media Player cannot play the file. The error that says"the player might not support the file type or does not support the codec used to compress the file.

  The properties of the file are:

  3GP.PNG

  Hyper Text Transfer Protocol

  TYPE: A PNG Image

  How can I fix?

  The problem is that Windows Media Player cannot play the file. The error that says"the player might not support the file type or does not support the codec used to compress the file.

  The properties of the file are:

  3GP.PNG

  Hyper Text Transfer Protocol

  TYPE: A PNG Image

  How can I fix?

  Windows gives you integrated programs to open the image as png files.

  In Vista, use Windows Photo Gallery to open png files.

  In Windows 7, if you use it, you can use Windows Photo Viewer to open png files.

  If you have installed Windows Live Essentials, you can use Windows live Photo Gallery to open png files.

• You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  What does this message mean? I get when I click on the icon to evaluate files on another of our computers. "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  The other computer has not been configured to allow remote access to this folder from your account.  You'll want to go to this other computer, right click on the folder that is shared and go to properties, then set the appropriate security settings to allow access.

• my mouse is recognized that it simply does not work?

  my mouse is recognized that it simply does not work?

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

   

  The mouse does not work.

  1. What is brand and model mouse?

  2. do you receive any error messages?

   

  There could be a problem with the drivers. To check that I suggest you to update the drivers and check if the problem persists.

  Visit the site to update the driver:

   

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658?WA=wsignin1.0

  You also try to get the latest drivers from the manufacturer.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Error Windows Media Player cannot play the file because "it might not be a sound device installed on your computer.

  Original title: Media Player

  THE FOLLOWING IS a MESSAGE I GET WHEN TRYING TO DOWNLOAD FILES: "Windows Media Player cannot play this file because there is a problem with the audio device.  "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.  What "audio device" are talking about?

  Hello

  1. do you get an error with this error code?

  2 have you installed multiple audio devices on your computer?

  3. what version of Media Player do you use?

  4. were you able to play the files using Media Player without any problem before?

  5 did you a recent software or changes to the material on the computer?

  Audio device is the part that allows sound from the computer. If the appliance is used or if the drivers are corrupt, then you can get the error message.

  I suggest you go through the steps and check.

  Method 1:

  Quit other programs that may be using your sound device, and then try to play the file again.

  Method 2: Install an updated driver.

  Step 1: Firstly uninstall the audio driver from Device Manager and add or remove programs

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. to the title sound, video and games controller, check the sound card that is listed.

  d. right click on the sound card and then click on uninstall the driver.

  Step 2: To see if an updated driver is available, use Windows Update or access the sound device manufacturer's Web site.

  Follow these steps to do the same thing:

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. the title sound, the video controller and games, make sure that the sound card is listed.

  d. right click on the sound card and then click Update driver to install the latest version of the driver.

  e. visit the sound card manufacturer's Web site to determine if a newer version of the driver is available for download.

  Method 3:

  If you have multiple audio devices installed on your computer, try to use another. The selected audio device might not support Secure Audio Path (SAP).

  Additional reference on:

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317/

  Hope this helps and keep us informed if you need help.

• "[------\\[Computer name] [name of the file or folder] is not accessible." You might not have permission to use this network resource.

  I have a home network with four computers. I have some folders and files we want to share. I haveselected these folders and files in each computer and right click top of opening and then the sharing and Security tab and check share this folder on the network, and then clicking apply and OK. [However, when I try to access these files or folders from another computer on the network I get the name of \\[Computer]------[file or folder name] is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permisions. Not enough server storage is available to process this command. Increased the value of the IRPStackSize following another Microsoft kb but stil get the same message.

  How can I fix this problem so that we can share these files and folders between my wife, children and myself.

  OS Win XP Pro SP3 with all its current updates on all computers.

  Any help and asisitance will be greatly appreciated

  Sadnewbie

  Hello

  Perform the steps from the link below and see if it helps.

  Error message when you try to access a network Windows XP computer: "you might not have permission to use this network resource".

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Hope this information helps.

• Error "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file' when try to play wav or midi files.

  Original title: WMP "can't play wav or midi.

  Using WMP 11 on Windows XP SP3.

  Windows Media Player has somehow forgotten how to play wav or midi files. Doubleclicking either of these file types give an error "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file. " There is a button 'Close' and 'Web Help' which still informs me, "you met the C00D1199 error message... ". ». Following the advice given nothing less than useful.

  I can easily play these files with RealPlayer or VLC so I don't think it's a driver problem, and it wasn't a corruption right after installing the other players. WMP seems to work OK when playing music or AVI. And there is no harm to hear a sound (wav or midi) in Windows for various system events. Have already uninstalled/reinstalled WMP without result.

  Thanks for your reply.

  I have since determeined the problem comes from an updated codec package I installed a few weeks ago. These codecs were from Shark007 which I believe is a Microsoft MVP. Use the codecs from this site for a number of years without any problems so I did not initially suspect it was the source of the problem. I uninstalled the codec pack and installed K-light package and everything seems to be Ok now. Now, I'll be in contact with the members of this forum.

• "Cannot access working group on some computers running XP - ' < name of working group > is not accessible. You might not have permission to use this network resource ".

  I have a home with 4 PC network - one of them is running Windows 7 Home Premium (with homegroup disabled) and others running XP Pro.  The XP machines is called 'Server' and the server and the computer services browser running and set to automatic.  Two other computers, called "Notebook" and "Dell", as well as the machine Windows 7 have no file and sharing printers enabled and have specifically the Server service is disabled.

  My problem is that one of the two XP client machines cannot access the working group.  Let me be clear about this: I open Windows Explorer and click on "My network places"-> "entire network"-> "Microsoft Windows network", there is then a second 5-10 break and then my workgroup name is displayed.  When I click on the name of the Working Group, there is another ~ 10 second pause and then I get a message that says error " is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have permissions.  A device attached to the system does not work. ', where is the name of my group to work for other days, after some of the computers are restarted, I find that the XP client has absolutely no problem with that; but the other now has this same problem.  In other words, the problem going on between two XP clients.

  Let's analyze: I have Windows on all PC firewall and any other firewall program.  I tried to disable the Windows Firewall and my anti-virus (temporarily), program without effect.  This may not be a problem with the way I've set up my actions because the error occurs when I try to click on the task force rather than a shared resource.  This cannot be a problem with a specific XP client because at different times, each of the two PCs worked perfectly without any changes of configuration made between the two.  It could be a problem with the server settings; but I don't see what it could be.  I tried editing

  HKLM\System\CurrentControlSet\Services\LanmanServer\Parameters and changing

  IRPStackSize from 21 to 45, then 50.  I also tried to change the size of 2 to 3.  I restarted the server and the client XP and had no effect.

  I don't have the same account of user configured on all three machines.  However, this cannot be the issue because the problem occurs when I click on the task force, before the server name is still displayed.  In addition, each of these two XP clients have connected with their existing user accounts at times.

  I tried the Wizzard of configuration network running on all four machines, without effect.  I tried a lot of things, most of which I can't remember.  I'm at the end of my mind.  Help, please.

  JW,

  Thanks for the continued support.

  By the advice of IPCONFIG, I looked at the registry for all computers and found EnableProxy wasn't there.  According to the documentation by default to 0, which is what we want.  However, I added it to all the computers and left it set to 0 and restarted the computer.  The node Type still said 'unknown '.

  Thanks for the info on the master browser.

  The ""Network location cannot be reached"when you access actions."
  the article talks about Windows 2003 Server and none of the symptoms mentioned relate to this situation.

  The "network adapter advanced troubleshooting for Windows workstations" is on hardware troubleshooting.  I think that it's probably not a problem because the computer has no trouble to access the internet, which is not possible if the card network are not working.

  I went through the AutoCorrect entry to reset the TCP/IP stack, even if the article describes symptoms such as difficulty to access the internet...  And...  THIS MARKET!

  After re-booting, the PC that was in trouble can now access the working group.  All other PCs can always too (have not tried to restart all over again).  AWESOME!  I can't thank you enough!

  I re-post if the syptoms happen; but for now, we can consider this issue RESOLVED.

  Thank you 1 million,

  Adam