fade and STOP images

Similar Questions

• How can I get all the control in one place in 3.6.16 buttons, as they did in previous versions? Have the refresh and stop between address buttons and windows search and the home button on the far right is terrible.

  In 3.6.16, the buttons are all over the place. In previous versions, forward, back, refresh, stop and home buttons were all together. In this version, the refresh and stop buttons are between the address and search windows and the home button on the far right.

  I'd love to have them all together as they used to be - much easier to use that way. I tried to install other themes, but the coding of this version too roll themes.

  All the buttons can be moved to the toolbar by right-clicking anywhere that isn't a button or the address bar on the toolbar and choosing Customize...

  You can then drag the buttons around the toolbar to position them toy our taste. When you click Customize... Favorites and Refresh buttons will temporarily turn into regular buttons that you can move around. If you place them to the right of the address bar, they will merge with it. If you move them somewhere else, they will become the normal buttons. You can use this to move a button on the toolbar anywhere you want.

  Themes do not set the order of the toolbar buttons and so will not replace it.

  See the images below for reference:

• use of an input signal to start and stop screws

  IO have a Vi that must be started and stopped by a signal from a sensor on an automated production line. the problem is that the Vi I created to capture and compare images from a webcam placed on a robotic arm that is used to fasten the screw in part needs to be started and stopped a man using the screw that is "run" buttons located at the top left of the façade of the screws. How can I use an input of probe signal (+ 5 V for 10 ms) to statrt and stop the Vi? The Vi cannot be allowed to run when there is no room for the robotic arm work, it would consume electricity that costs money.

  No program in any language can be started by an external signal.  Some software must be running in order to detect the signal.  If this software is an integrated program running on a microcontroller or a multiprocessor supercomputer it still works the same way.  The power required by the computer is probably low compared to the power consumed by robots and other manufacturing processes.

  As you have described your system, you will need a computer that runs all the time while waiting for something to happen on the Web site, which indicates that a paypal transaction has occurred.  What is different from having a computer running LV with a VI in an idle state?

  If your process needs to be thrifty, you expect better have enough orders that you turn the whole sytem market very often.  The cost of automation of all would be excluded by the income of sproradic.

  It is certainly feasible to have a master computer that controls the power of certain parts of the system that are not needed at all times.  PLCs are used to control the State strong relays or contactors put different subsystems.  Make sure that time is allowed for systems comes on and initialization before you begin production.

  I would focus first on getting the automation of a condition but inactive of working before trying to go to the complete power down and control.  I think you will find that the power process will require sitting in a State of inactivity for some parts of the system while the other parts are being initialized, you will need to do in a State of rest.

  Lynn

• Emulator CVS displays bitmap color black and white images

  I use a VBAI2009 inspection on 1454 CVS which uses a camera firewire AVT Guppy F - 036C. This system is on a production machine inspect the product we make. VBAI uses the legacy IMAQ for IEEE 1394 on a CVS not the driver IMAQ-dx cameras. The VBAI script contains several steps function color inspection. To get the AVT camera to display the color, I had to install the files of MAX camera using the Bayer color tab because Bayer settings are not accessible from the driver on the CVS IMAQ. I'm no adjustment of the camera of the VBAI. This configuration works well and has worked for 6 months on the machine of production without any problem.

  Now, I need to edit the VBAI script but can't stop the machine to make the changes and test the program. I captured images bitmap using MAX during the inspection was installed 6 months ago and they stored on my host for just such an occasion. I am using these captured images and the CVS emulator in VBAI to make the changes to the program offline. I performed the inspection under the CVS emulator and the acquisition stage is configured to point to the captured bitmap images using the button Configure Simulation settings. The problem I have is that bitmaps are displayed as black & white in the emulator, even if these are images of color seen with paint. I can't find a way to fix this. Is - this problem as a result of using the parameters of Bayer to create the image color or something else in the emulator? The emulator, no installation of color image treats?

  Any help would be appreciated,

  Mark

  The stages of acquisition camera record video mode information used to acquire images. If you use these steps in emulation mode, it converts the type size and the image to match what has been gained for calibration and processing step use the same type of image. Looks like than the stage thought that the image was mono, even if you got it to be color. I will consider how it could have be saved incorrectly when you use the settings of Bayer. In the short term, you can disable the acquisition stage (don't delete so you do not lose the camera settings saved in step) and use a stage of acquisition of simulation or a new phase in the acquisition of 1394 and won't force the image size/type.

  Hope this helps,

  Brad

• How can I prevent the shutdown task scheduler engine, get the new display detected to work and avoid receiving the message "Internet Explorer has encountered a problem and stop"? __

  My laptop is a Dell Inspiron 1520, running Windows Vista Home Edition Premium and Internet Explorer 9.  My extra monitor is a Sharp Aquos LED HD - TV, the model LC-46LE700UN.  I've been using a VGA cable to me onnecter the laptop and TV.

  The laptop seems to operate normally when not connect to the TV.

  As soon as the VGA cable is connected to the laptop (without being connected to the TV), the following message appears:

  'Microsoft Windows - Task Scheduler engine has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is found. »

  When initially, I connected the laptop to TV, "new display detected" was automatically acti EV.  Soon, it was activated is no longer automatically.  I was able to activate manually using Windows Mobility Center during automatic activation failed initially but now Windows Mobility Center no longer detects the new view.

  Using Fn + F8, I can view the image on the laptop or TV, but not both simultaneously.

  The message "Internet Explorer has encountered a problem and stop" appears intermittently, but I can still make internet sites and show the content after the message.

  I have download software, myp2p.eu, a site for watching TV programs "streaming", including PPStream, Sopcast, Live, Stream Torrent Sina, a Swarm, TVAnts, UUSee, VGO and Veetle player and canceled downloads for PPL (who failed an integrity check), PPMate (corrupted) and (blocked) TVKoo.

  Norton Security quarantined the installer of UUSee, indicating that it was a high risk of program with many users.

  To a computer repair shop and using a different additional display flat screen, I could not duplicate the problems yesterday (4 October 2010), when the "new detected display" has been activated automatically, and I could see the photo or the other and both screens.

  I tried to restore the system to a date (on the list) before when the problems occurred first - failure of the restoration of the system.  I tried to use scandisk, but received no indication that he had performed and corrected all errors found after restarting Windows.  I looked at responses from forum, the display setting and the new display detected support literature.

  How can I avoid these problems?  Help!

  Hello

  Restoring the system end up with any error message?

  This could also happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To troubleshoot error messages and other issues,
  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Steps-
  1 log on to the computer using an account with administrator rights
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services.
  If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  See this article-
  http://support.Microsoft.com/kb/929135

  This should solve your problem.

  -Robert

• WMP will open the VTS_01_1.VOB and stop at the end of this file

  I don't know if this is the place to post this question, but it's here.

  I created a web page that lists the cover images all my DVDs that I have on an external hard drive and each cover image is related to the first file VTS_01_1.VOB for this DVD.

  I test page to see how it works for each device I have.  The page works perfectly with my tablet from Samsung, the player on the Tablet, I installed automatically go VTS_01_1.VOB, VTS_01_2.VOB and so on until the movie is done.

  If I use my pc Windows 7, WMP will open the VTS_01_1.VOB and stop at the end of this file, how can I get WMP to continue to the next file automatically?

  Personally, I would check the source code of the Web page of the first.

  Paste the full path to the video_ts.ifo file in a new MS Word document and save it as htm.  Then run the file [it should open in your default browser], then right-click on the page and select view source.  Find the link - it should look like

  href ="... / SomeFolder/VIDEO_TS. IFO "> D:\SomeFolder/VIDEO_TS." IFO

  assuming that D:\SomeFolder/video_ts.ifo is the text that is displayed for the link

  Then go to your actual Web page and discover its source to verify that the link contains this model.

  If the solution is not as simple as that, then you will need to post a question in the section Web & networks of this forum I don't know enough about writing for the Web page.

  To increase the chances of getting there help please include a description of what happens when you try to click on the link - rather than 'will not work.

• Webcam has stopped working. It works and stops himself making a noise to plug and unplug the webcam

  Original title: webcam problem

  Hi, I bought a new sony vaio sve14118fxw and I have webcam stopped working actually, it works and stops by itself, it makes a noise like u Plug and unplug the webcam

  Hi Monachehab,

  Thanks for posting this question in the Microsoft Community!

  I understand that you are facing problems with webcam on the computer. I'm sorry for the inconvenience caused to you. Rest assured that I will do my level best to help you.

  It would be helpful if you could answer these questions as well before that help out us on this issue.

  (1) you get an error message?

  (2) did you of recent changes to the computer before the show?

  Method 1: Run Hardware troubleshooter
  You can run the hardware and devices Troubleshooter built into Windows 7 and check if it helps.
  For more information about how to open the resolution of problems in Windows 7, visit the following Microsoft Web site.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Uninstall and reinstall the driver for the webcam
  a. click Start, in the start of type Device Manager search bar and press enter.
  b. in the Device Manager window, please check if you see the webcam under imaging devices. If it is listed, right click on the webcam, and then click Uninstall.
  c. restart the computer, the webcam will be automatically installed.
  d. check if the webcam works. If this does not work, then download and reinstall the latest version of the driver on the manufacturer's Web site.

  http://eSupport.Sony.com/us/p/model-home.pl?MDL=SVE14118FXW&template_id=1&Region_ID=1&tab=download#/downloadTab

  For more information, see the links below:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I would also ask you to contact the manufacturer of your computer for any other assistance.

  VAIO support:
  http://eSupport.Sony.com/Perl/select-System.pl?PRODTYPE=1, 24,26,66,9,70,5,72

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Twice in loop and stop at a record label?

  Hello community,

  
  My question:

  How can I loop my entire animation twice * and after that judgment to label a frame?

  It's the same question about it , but this time to animate the CC.

  Example:
  A banner has 100 images. It must be a loop twice from 0 to 100, then plays entre0 and stop at frame 80.

  
  Thank you

  Michael

  * Copy the following code loops all the animation twice:

  {if(!this.alreadyExecuted)}

  this.alreadyExecuted = true;

  this.loopNum = 1;

  } else {}

  this.loopNum ++;

  {if(this.loopNum==2)}

  This.Stop ();

  }

  }

  You can place this code in the frame of 80, and he would do what you ask for. Make sure that in the publication settings, you have the chronology of verified loop box.

• Need help with keyframes for start and stop an effect

  I use a mask and blurred for a few seconds. I understand that I must use keyframes to indicate when to start and stop this effect in the video, so that the same area is not trimmed for video full.

  The problem is, I can't find help by correctly setting the keyframes. When I opened the menu keyframes in the effect, it seems that I must together for both the mask took and the blur effect. I did... to start and stop at specific times, but the rest indeed throughout the video, so of course miss me something by using keyframes. The manual to create effects is not useful. I need assistance with keyframes as what I'm doing is clearly not working. Help!

  If the mask does not move that you don't have to set the keyframe. For the blur, click the stopwatch next to 'bluriness' add keyframes as below, the Reds don't blur and blue those maximum blur this fade effect.

• Goto and stop using the keys on the keyboard?

  Hello

  Is this possible...

  Got a simple presentation keys to access to and stop on the image tag. It scrolls the pages presenting the front button and back.

  However it is possible to use the keyboard forward and back buttons to control walking forward and backward movement of the pages.

  This is an application for my client's last-minute... If you are looking for a simple solution if possible.

  Thank you

  You can assign a listener to the keys, although I'm not sure what you consider to be front and rear buttons to keyboard...

  var keyListener:Object = new Object();
  Key.addListener (keyListener);

  keyListener.onKeyDown = function() {}
  If (Key.GetCode () == Key.LEFT) trace ("left");  Replace the traces of your commands goto
  If (Key.GetCode () == Key.RIGHT) trace ("right");
  }

• I can't do Activation, my real account and stop true bassword

  I can't do Activation, my real account and stop true bassword

  Someone was owner this iPhone before you bought it?  Lock activation request most likely their information.

  The former owner must unlock the iPhone, or it will be useless to you.

  Find my iPhone Activation Lock - Apple Support

• iMac 27 inch overheats and stops

  27-inch iMac processor intel core duo two overheats and stops, what is the best way to clean the dust to cool properly?

  Remove the RAM cover and vacuum any dust. Do NOT blow air into the opening!

  Are you sure that it is overheating, if that's why need you!

• I've been upgraded to El Capitan and electricity went off and stopped the session.  I don't have time to continue for 12 hours.  It is the CV.  How can I cancel until I have more time?

  I've been upgraded to El Capitan and electricity went off and stopped the session.  I don't have time to continue for 12 hours.  It is the CV.  How can I cancel until I have more time?

  Hello nancy milano,.

  Thanks for this info and choosing the communities Support from Apple. I know how important is able to complete your update to El Capitan at a later date! The good news is that you can simply delete the "install Mac OS X" install app in the Applications folder on your Mac. Then you can open the Mac App Store when you're ready to update and restart the download from the tab updates or searching through the Mac App Store for El Capitan. This is a resource that explains the process of update more:

  Update of OS X El Capitan

  See you soon!

• iOS 10 times to start and stop the music messed up

  I'm running a SE 64 GB iPhone with iOS 10. Many songs from my iTunes library has some moments of power, but after update, they are all mixed. Songs don't start or stop when they're supposed to, or they're going to start and stop at a random time, which is annoying. The same problem was in the beta, causing me to backup on iOS 9. I assumed that this bug would be fixed in the final version. All the solutions in addition to remove and re - download my library?

  Hello Carnage1215,

  Thank you for reaching out to the Community Support from Apple. I understand your music has had some problems and I want to help him. By the sounds of things that your songs start may be delayed or in the middle of the piece, is that correct?

  Before you make too much trouble shooting, it's a good idea to make a backup of your iPhone If you don't have it already. If you do not know how to save your phone from this article will guide you in the process: the backup of your iPhone, iPad and iPod touch

  Once you have made a backup, I would recommend to reset all the settings on your iPhone. This will ensure that all old data of a version of iOS parameter are removed and reset default. This removes all data and applications, photos or contacts, but it removes all of your preferences for the Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, contact ID, brightness & paper painted and privacy, then you may need to define these things upwards after this reset.

  Do this please go to settings > general > reset > reset all settings.

  If you always use the same behavior after you restart your phone, please inform the community. We are all here to help.
  Best regards.

• My home button is really hot and stop working

  I don't know what is happening with my iphone 6. When I woke up, my iphone already hot as * and my id as warm touch and stop working. Can someone give me an advice what to do?

  Make an appointment at the Genius Bar in Apple for the service. If you need a Apple Store - find a store - Apple.