Fade in and out on several layers of video

Similar Questions

• Can I fade in and out on the same track several times in After Effects?

  Hi all

  I was wondering if it is possible to fade in and out, on the same track, several times. Like, I have this audio I want to fade at the beginning-48db to + 0 dB, and at the end of the song I want it to go from + 0 dB to-48db. I don't know if it's possible, but I can't get it to work. Can I get more than two keyframes for the same way?

  Thank you for taking the time to read my question.

  Marco van Lindt

  I do not recommend the use of AE to do any sort of audio work, but yes. You can have hundreds of keyframes by track. If you set the value, we must add another keyframe. There is no that?

• Tecra M2 errors with screen: colors black, white & Rainbow fade in and out

  My laptop screen fades in and out with the colors white, black, grey and Rainbow. No command/function is able to accomplish. When I disable (using the power button) and back on, it goes back to wipe the screen. My laptop is currently useless. Someone had this problem? Any help for a novice? Thank you

  Hello

  The best thing you can do is to test it with the external monitor. If the external monitor shows your desktop well probably the LCD is faulty. By the same result on the external monitor, the problem may be caused by a faulty graphics card.

  That's all that I can say about it.

• Question about the reduction of noise/hiss & fade in and out

  Hello I am new to hearing. I use Audition CS5.5. I was wondering how I can remove the "whistling" singing (whenever the words with "s" or "EC" are sung as "silence" or "stones"). I have a multitrack project open and I have the vocal track selected, but the function "hiss reduction" Effects-> noise reduction/restoration is gray. Similarly, "noise reduction" and "capture point noise" is also grayed out (even if I have a section of the track selected with the time selection tool). Why are these unusable?

  Another question is how can I add fade in/out effects in multitrack view? I know that I can draw lines for the fade in and out while a single track is selected, but I always like to use multitrack view, while working so that I could easily move the vocals to match the music.

  Thank you.

  Noise reduction is an effect that only works in Edit/Waveform mode.  It doesn't have multitrack real-time.

  However what you're saying, your problem is the sibilance not "whistling" anyway.  Hiss reduction is there to get a constant background hissing like a pre amp out in noisy mic.  You may do better by using what is called a De-Esser which you find in the FFT filter under filters and EQ or compressor multiband in the effects of Amplitude and Compression.  I must be a bit vague because I've never bothered with CS5.5 in order to remember here is that it was these effects.

  On your other question, you have "volume envelopes" in multitrack view and can 'draw lines' it too.  If you do not get them, go to the view menu and make sure that "Show Clip Volume envelopes" is checked.

• Fade in and out buttons

  Hello

  wondering what is the best way to get the buttons at the bottom to fade in and out?

  the site is http://www.ntvic.com.au

  Cheers.

  Michael

  Hi Michael,

  Replace the values highlighted

  #wrapper #navigationalbar ul li a {}

  color: #FFF;

  background-color:transparent;

  text-decoration: none;

  display: block;

  text-align: right;

  font family: Titillium Web, without serif.

  Police-weight: 600;

  do-size: 16px;

  padding: 5px;

  -webkit-transition: background-color s 0.45 0 ease-in-out, s;

  -moz-transition: background-color s 0.45 0 ease-in-out, s;

  -ms-transition: background-color s 0.45 0 ease-in-out, s;

  -o - transition: background-color s 0.45 0 ease-in-out, s;

  transition: background-color s 0.45 0 ease-in-out, s;

  }

  #wrapper #navigationalbar ul li a: hover {}

  background-color: transparent;

  color: #D7C427;

  transition: background-1 s ease-in-out 0 color;

  }

• Drawn with the pencil tool seems to fade in and out

  My Nme is Allen Togwell.Case No.: 0183721415. Your type of chat line says I need a graphics card to solve my problem for my CS6. He gave a link but disconnected before I could use it. Can you help me with what type of graphics card, I need. I am 75 years old and not very literate com.

  Thank you

  Hi Allen,.

  I looked at the file number and watched a recording of you work with the agent and I am not convinced that what you see is necessarily due to the graphics card.

  This is my interpretation and thoughts around what have seen you. I noticed that you are working on an image that took a good amount of the screen seen in the zoom of 16.7%. In other words, that it was a large enough image. Then I noticed that you use the pencil tool with a piece that was 4 pixels.

  I think that the combination of these two things was the reason for which the pencil tool appeared jerky or fade in and out when establishing. This happens because you are using such a small size and are zooming back as long as the lines are barely visible. When you zoom in her resamples program appearance. This resampling can cause detail to be lost and the appearance of vary depending on what level of zoom is used, 16.7% is particularly bad, with fine detail.

  I think that there are two solutions, use a different zoom level to get a better view or use a pencil with a larger size.

  I recorded this video for you for example

  http://screencast.com/t/e9dhiHKoKbv

  I suspect the list that the agent was suggested for video cards was at the bottom of this document

  http://helpx.Adobe.com/Photoshop/KB/Photoshop-CS6-GPU-FAQ.html

  Hope that helps,

  -Dave

• How can I make several images fade in and out on a webpage using Dreamweaver cs5?

  I have a site that I maintain (www.tajmahalfinneytown.com) and I created the images fading in and out of each other, but using flash. Well, most of the people are using mobile devices, and flash is not supported! I have 5 images and you want to make a simple fade no flash in, fade on the thing. I looked at a few java scripts, but I don't know what part I put in the head and body. So the simple, the better. Thanks in advance!-Peter

  Here is a simple one - source code

  «"" "Homepage: cards by Karen: handmade greeting cards»»»"

  There is a link to the javascript that save you and upload to your server

  http://www.kardsbykaren.us/fadeslideshow.js

  There is a JavaScript block in the head of your HTML page section and

  This in the body where the images should appear:

  div >

• Fade in and out several elements

  Hello

  I have a question about fade and fade out into Premiere Pro.

  I started using the first lang Pro not there. Before that, I used Premiere Elements.

  In Premiere Elements, there was a feature where I could select multiple items and activate the "fade in" and function "fade out. I can't find in Premiere Pro. The only option I see is to apply the effect to each item. But it's a lot of work.

  Can someone tell me if this is possible and if so, how.

  Thank you!

  OP does not mean titles but items (clips, titles etc.).

  Set the opacity with keyframes for a sequence of how you want.

  Then right-click on the word opacity in the effect controls and save the preset.

  If you don't want any fancy stuff just use a cross fade.

• Audio fades in and out on m9400t

  The noise began fading in and out while watching television on my Media Center m9400t.  Has anyone seen cela or have any ideas on a fix?  I use the audio material deault Realtek, no optional sound card.

  Message edited by Big_Al12 on 04/13/2009 06:22
  Message edited by Big_Al12 on 04/13/2009 06:22
  Message edited by Big_Al12 on 04/13/2009 06:22

  I think I solved my problem.  I opened Control Panel Realtek no sound control panel and set by default and on Virtual Surround speakers.  I watched two recorded HD shows and several hours of programming with any his erasure of HD air.  This may very well be the solution!

• Fade in and out between Adobe Muse pages

  Hello

  How do I create the fade in and fade out effect between pages on Adobe Muse 2015.1 without using widgets.

  Thank you and good evening.

  https://creative.Adobe.com/addons/products/12955#.V6mMn2VT30c

• (Redirected) Alienware is unresponsive and the power seems to fade in and out

  I have an Alienware Aurora R3 of 2012 desktop computer running the updated Windows 7 which will randomly have issues (sometimes after 2 hours, sometimes after 5 minutes) where the keyboard and mouse stop working (although light on the keyboard remains lit, the light on the fades of the mouse in and out) , and I can hear one of the fans in the computer running upward and slowing down repeatedly.  The Alienhead also of the cycles of its normal color to yellow, then rehearsals, in sync with the fan turns at the top and bottom.  The computer does not seem to stay active with programs still running.

  I tried to replace the power supply with a different dell power supply (exact same model) and after a few hours, the problem started again.

  I blew all the dust out of the computer twice with no success.

  I would appreciate any suggestions and help.  Thank you!

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• How to eliminate the fade in and out between the slides in Captivate 6?

  I tried to go to the locations suggested in this same topic for Captivate 5, and my settings all appear to be correct.  Fade in and Fade out on the first/last slide are unchecked.  Each individual slide's Transition not verified; each individual element also has the Transition not verified.  When I discovered the master slide I see no option - I get only the part 'General' of the menu - even when I click on the model of slides in the timeline panel.

  I'd appreciate a lot any help you could give.

  Hello

  Glad to know it worked

  If there are answered you post, please mark it as correct.

  Thank you

  Vikram

• I want that my text fade in and out, how do I do that?

  I'm doing a title page with several text boxes that I am looking to fade at different times. Is this possible? : I could only apparently applied an animation (fade in) and wasn't able to work on the gradual estrangement. Do I have to create a duplicate title page and apply another transition?

  Each text box to place it on its own video track stacked above the other. You can then define the position, fades and opacity for each individual title.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Reading fades in and out of poor quality

  So I'm on a MacbookPro, 4 GB of Ram, running Mac OS x 10.6.6 with first Pro 5 and my reading doing this weird thing where the quality snaps in and out. It'll look exactly as it should, then the image type of split into layers. The top layer moves diagonally in worse and worse quality then snaps back to normal quality for a moment. The lower layer is simply poor quality. These aren't real layers, just trying to describe this problem very strange as best as I can.

  Any info on how I could solve this problem would be greatly appreciated and more info if you need will be willingly given.

  The value of reading full resolution; looks like the split caused by playback H.264 resolution of 1/2 or lower. Note that this will require more computer and will result probably of video frames and unmovable stuttering.

• Fade in and out how a MIDI track?

  Hello, I'm trying to fade in my gospel choir and I can't seem to find where logic to put the keys to Automation! I can't fade in with my audio usually, but not my lunch! I tried using my tools of discoloration and I also tried selecting the key to automation, but the yellow bar of automation never shows up! I also watched videos of youtube on how to fade in specific titles by hovering in the upper left corner to create a fade in... But there is never a command prompt or a change in cursor for me to do this! Helpl!

  In this first image, I chose the key to automation, but I can't find the toolbar edition for me to begin to manipulate the audio! The second photo shows that I have my gradient tool selected, but it can't create an individual fade in.

  

  

  is to use Automation track or region and automate the volume to fade out.

  Press A to open the automation parameters, set the line volume parameter and pull down where you want to fade at the beginning/end.