Tecra M2 errors with screen: colors black, white & Rainbow fade in and out
My laptop screen fades in and out with the colors white, black, grey and Rainbow. No command/function is able to accomplish. When I disable (using the power button) and back on, it goes back to wipe the screen. My laptop is currently useless. Someone had this problem? Any help for a novice? Thank you
Hello
The best thing you can do is to test it with the external monitor. If the external monitor shows your desktop well probably the LCD is faulty. By the same result on the external monitor, the problem may be caused by a faulty graphics card.
That's all that I can say about it.
Tags: Toshiba
Similar Questions
-
Drawn with the pencil tool seems to fade in and out
My Nme is Allen Togwell.Case No.: 0183721415. Your type of chat line says I need a graphics card to solve my problem for my CS6. He gave a link but disconnected before I could use it. Can you help me with what type of graphics card, I need. I am 75 years old and not very literate com.
Thank you
Hi Allen,.
I looked at the file number and watched a recording of you work with the agent and I am not convinced that what you see is necessarily due to the graphics card.
This is my interpretation and thoughts around what have seen you. I noticed that you are working on an image that took a good amount of the screen seen in the zoom of 16.7%. In other words, that it was a large enough image. Then I noticed that you use the pencil tool with a piece that was 4 pixels.
I think that the combination of these two things was the reason for which the pencil tool appeared jerky or fade in and out when establishing. This happens because you are using such a small size and are zooming back as long as the lines are barely visible. When you zoom in her resamples program appearance. This resampling can cause detail to be lost and the appearance of vary depending on what level of zoom is used, 16.7% is particularly bad, with fine detail.
I think that there are two solutions, use a different zoom level to get a better view or use a pencil with a larger size.
I recorded this video for you for example
http://screencast.com/t/e9dhiHKoKbv
I suspect the list that the agent was suggested for video cards was at the bottom of this document
http://helpx.Adobe.com/Photoshop/KB/Photoshop-CS6-GPU-FAQ.html
Hope that helps,
-Dave
-
I'm in photoshop and I'm trying to adjust the pressure of my pen. However, I get this sign of error with the sign of exclamation on the side and the pressure is not resolved.
I'm running on Windows 8, I'm using the latest version of Photoshop (2015) and I have a Wacom Intuos tablet. What should I do?
Thanks, I forgot actually download wacom itself. It works now. Thank you!
-
Error on screen blue/black (cannot start pc)
In the middle of the day that my pc everything went black without reason... by the time I could still hear people talking about other software, and they could hear me fine. I restarted my computer, but when he started upward I got was a black screen with colored horizontal lines. Whenever I try to start my pc it does this or is a blue screen that has repair options. On the repair options, I try to restore my PC, but it requires a password for my account profile computers that I disabled the past few months. I also try to reset my pc everything but it says "Insert your installation or windows recovery media" who am I to all too well. but I tried to put the windows disk 8 in which he refused to take.
Help, please!
Hi Tom,
Thanks for posting your query in Microsoft Community.According to the description of the problem, I understand that your computer has become suddenly black and now in any start-up situation with the blue screen repair option, correct me if I'm wrong.Blue screen (sometimes referred to as errors or errors of STOP code black screen) errors occur if a serious problem, windows to shut down or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."To better understand this issue, I would like to know the following information:1. What is the brand and model of the computer?2 did you receive an error message before the computer went black?3. did you of recent changes to the computer before this problem?4. are you not able to start on the screen?5. When you say "I tried to put the windows disk 8 in which he refused to take", is the DVD drive on the computer that works well or not the same bed on another computer in Windows 8 support?
When you say "on the repair options, I try to restore my PC but it requires a password for my account profile computers that I have disabled months ago" I suggest you try the enter without specifying a password and check if it allows to connect to the user profile that you have disabled the password long ago.If you are not able to connect with the system restore without entering the password, and since you're telling the DVD of Windows 8 refuse to take, I suggest you to create recovery USB Windows 8 media and then try to repair the computer.Create a recovery USB diskMethod 1: Auto repair:
(a) when your computer starts, wait for the logo of the manufacturer check the option of start menu, it will usually F12.
(b) the start menu key can be different with each manufacturer. If you are unable to find the start menu button, you can consult the user manual.
(c) restarts the computer, when you see the logo of the manufacturer, continue to press the Boot option menu key to enter the boot menu and change the option to boot in DVD ROM.
(d) once you start your computer by using Windows 8 DVD or system repair disc, a black screen is displayed with the gray text "press any key to boot from CD or DVD". Press a button on any.
(e) select the exact time and the type of keyboard.
(f) click on repair your computer in the lower left corner
(g) click on troubleshooting, advanced option and then click on auto repair.Method 2: If the method above to perform the automatic repair does not help, I suggest to follow the article below and try to run the system restore.
Resolution of errors blue screen in WindowsSystem restore warning: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.
Additional reference:Repair & recoveryHope this information helps, just reply to the State of the question to get help.We will be more than happy to help. -
Hello everyone,
I bought this fantastic machine called spectrum x 360 and I love it.
Unfortunately since the early days I'm facing what I think it's a problem of driver/software (not the related material).
This problem only occurs when I'm on Windows, not in the bios or at the startup. JUST IN Windows envinroment, especially after the login, and when the computer was turned off. Sometimes when I use it after a while, randomly.
This occurs only when the spectrum is on battery. The problem does not appear on AC adapter.Problem: the screen goes black randomly for a few seconds and then reappear, sometimes the entire image on the right slide and there is a part that looks like yellow and corrupt, then goes black and reappears.
Windows Version: I'm on Windows Home 64 bit, build 14393.321 10 (update of the anniversary).
The entire screen works fine for normal operations, no artifacts.
Replication of the problem
Initially, I was able to reproduce the problem with the driver build 4360 (which is the version of the driver from the HP site). Whenever I loaded the home page of youtube and the banner has started playing on the screen went black sistematicly.
Then I updated the GPU driver through the Device Manager, which has improved my GPU driver to 21.20.16.4494, as of July 25, 2016 and the problem happens much more rarely.
Now I am facing this problem again but Edge works correctly and is not the cause of the problem, it can appear even when I don't do anything with the PC.I noticed this problem appears when saving options are enabled for the Intel GPU (I'm trying to translate this to English because the GPU driver Panel is in Italian):
-update panel houses;
-advanced mode; energy saving
If I disable these options, the problem does not appear or, better, for I've tested so far, he could not displayed when options are not in market, but I have not tested this very long to be sure.
In my opinion, there is a bug in the display driver, or some customizations made by HP causes problems with the driver.
The rest of the computer works correctly.
Any idea to solve this problem? Or should I keep these options turned off power saving?Hi, thanks for your help.
I have a passion for COMPUTING and ex-computer SCIENTIST, I am familiar in surveys on hardware/software questions and hope that this post will help some users get rid of this problem.
Black screens and screen corruption has been issued by the option called "auto refresh Panel" energy saving.
I did a lot of hours on battery (condition where this pop ups problem) in these days and the problem didn't show when it was turned off.
To verify that I tried to activate "Panel options self-identity" in certain occasions and, at random, on the first boot of the machine (after being turned off) the problem arises again.
It certainly is a problem with this energy-saving option.
Now everything works fine.
If the problem appears again, I will post more information.
Thank you for your support.
I think it would be useful to stick this post on top in this section of the forum, to be useful to other users and being more visible. -
Laptop screen turns black/inactive after being closed and reopened
When I close the lid of my laptop and open it again the screen is black or inactive. I do nothing as possible re - turn on the screen not to mention that my laptop restarts. What should I do? I have a Dell Inspiron 6000 and am running XP 32 bit.
Hello
Have you turned off the laptop before you close the lid?
You get an error message when you restart?
You can try to use the keyboard and check if it works.
If it works, then you can try to change the options for the keyboard power settings and check.
a. Click Start, click Run, type control keyboard and then click OK.
b. click on the Hardware tab, and then click Properties.
c. click Change settings
d. click the power management tab and check that allow it this device to wake the computer is turned on.
e. click OK, and then click OK again.
-
I have no idea what to do now. I have a MacBook Pro running OsX 10.9.5
uninstall all cc, clean by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 and then restart your computer.
If that solves the problem, install the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe
Test your computer again.
If no problem, install a program of cc using the desktop application.
Restart your computer.
If no problems, proceed with the installation of programs cc.
-
XPS 8300 with AMD HD 6770 white video between 5 and 15 minutes after connection.
I have a XPS with AMD HD 6770 and ST2320L monitor 8300.
The system has no hard disk formatted, so I can not only boot and use the keys F12 menu to load from CD or run the program Setup or diagnostics menus to investigate this problem.
If I boot from the DVD (System, norton bootable recovery tool restore disc), run diagnostics, or just leave the computer in the installation menu screen will go blank and enter the power saving mode about 10 minutes later. (Diagnosis show no error if executed until the screen turns)
I'm sure that the computer is running once again the white of the screen as caps lock / cd eject all still work but I can not answer of the screen.
I guess to a graphics card problem but overheating seems unlikely it has worked well for a year and restarts immediately after power turn off / turn on. Display is lost on the monitor and a HDMI TV connection so improbable it is associated with monitor.
There is no hard drive formatted as I was trying to convert from RAID to a single HARD disk after a disk failure, and only 15 minutes before the white of the screen it is not time to complete the restoration of the etc system! I do not see this pertaining to the issue of the display, but of course I had the box to open then could have dropped something on the inside. I reinstalled the card / cable...
Welcome any tool or ideas useful coming to DVD bootable - next action is to try another video card when I can get one in a few days.
Thank you
In case someone else has a similar problem the solution replaced the video card.
-
HP G42 screen is black, NEW issue, on reinstall and restart, now stuck on desktop
My notebook G42 has a black screen. I can't run, I can't boot my laptop in SafeMode either. I am very frustrated because I've only had it for 10 months, and unfortunately, it was a refurb manufacturer with a 3 month warranty. Any ideas on what to do?
I finally gave up on my windows 7 reinstall & all the problems that accompanied him. I have
downloaded and installed Ubuntu 11.10 without any problem, though.
-
Uploaded a few photos off the G12 and then charged the battery and when I reinstalled the battery I could see pictures, but when I switch them to camera mode I have brief purple lines then black. And I'm not able to take pictures. Help!
Uh oh, sounds like the processor or sensor could have retired. I have to assume that you can not access the menu to do a complete reset of the system, so I remove the battery and try to keep about an hour. With the battery, press the power button and hold for about 10 seconds. Then, reinstall the battery and see if it does the same thing. If so, you may need to contact Canon on a repair, but that could be very expensive. It could have been a static load that occurred when you changed the battery, otherwise the processor or the sensor has reached the end of the line.
I feel your anxiety that I have a PowerShot G12 and this is my favorite camera. It is used there, and some refurbished, to replace it. I hope you can get it running again.
Steve M.
-
Hello
After the re-construction of my computer with
a new card mother MSI (AMD Athlon II X 2 with 2 GB RAM DDR3 1066) and a new 500 GB hard drive and using only the edge graphics I can not finish installing Windows XP.Error code 80096001 you can see
HERE (http://sites.google.com/site/jugracamsi/)
some screenshots I took during the installation procedure. I have an original OEM licensed Windows XP CD with SP2 which I can install it easily on my old system.
What's wrong?
A quick google on the message final error "Setup could not install the product catalog" this product like the first:
http://support.Microsoft.com/kb/823303
If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog
-
Audio on inspiron 7000 13 10 fades in and out, windows with a deaf quality
Audio for all media through the speakers will become deaf to every few seconds, and then return to normal quality to become deaf again. This only happens with the speakers, though, as the helmet seems to work well.
I think I found a solution!
Right click on the speaker icon on the lower right part of your screen (sorry, don't remember the English name for it) and choose "Playback devices", you will get the sound menu. Click the Communications tab. You will find a set of options to "when windows detects the activity of communication:
Choose "do nothing".
This problem solved for me, hope it helps guys too. Sorry for my English, I'm not a native speaker.
-
Hello
How can set my screen resolution of firefox (I know zom in and outside zom, but when I restart my firefox it chanaged to perviose zoom level)Hello
Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution. There are several ways to solve this problem. See the Web pages are broad and fuzzy after update of Firefox - how to fix article for a suggestion. Here is another possible solution:
- Type of topic: config in the Firefox address bar and hit the Enter key.
- If the warning that this might void your warranty , click I'll be careful, I promised.
- Search for layout.css.devPixelsPerPx
- Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.
If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.
If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .
To adjust the font size for the user interface, you can use the extension of theme font & size changer .
This solve your problems? Please report to us!
Thank you.
-
The error occurs when I insert the game black & white 2 or command and conquer the first decade and click install on a automotive screens popping up, I am sure that these two errors are almost identical and sure if one is fixed so will the other be.
The error that says "Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »
To try to fix it already I found a page here which tells me how to install drivers different installshield, and I installed everything that have been listed. My operating system is Windows Xp home edition
Hello
Were you able to install these games without any problem before?Step 1: Install all updates of windows on your computer and check the number.
Reference: http://support.microsoft.com/kb/306525
Step 2: Copy the game on your computer, then check the issue.Step 3: Perform the clean boot your computer.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135Note: To restore your computer to a Normal startup mode, follow these steps:
1. click on start in the box start the search.
2. type msconfig and press ENTER.If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
4. When prompted, click on restart.Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Desktop screen, only black and white
My office is a blank screen, only black. I have Avast and Spyware Doc protection against viruses and having the most recent analysis of virus, that's what I get. Help, please.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not it, make a repair disc to start on another computer and use it on the failed computer:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
Apple tv remote app for my ipad 2 can't wake up Apple TV
My remote with Apple TV 4th generation bought a few months ago emissions very quickly. So I installed the remote app on my ipad 2. Works fine, but only after I turn on the Apple TV with the remote control. Once the Apple TV went sleep there is no way
-
For a single site only, the message that the page does not load. Clear my cache/cookies, according to the suggestions, but it allows me to access the site once, so I need to delete the cookies/cache again.How can I solve this problem?
-
Support for Windows 7 to VGN-SZ49
Where can I find Windows 7 support and drivers for my VGN SZ491N? I waited for a year! My S1/S2 special function buttons do not work. Help, please.
-
How to: install a printer
Original title: print a Document How can I install a printer in the menu printing. What to do when he says: a spooler problem.
-
Access to weapons of mass destruction via computer
I'm trying to figure out how to access my weapons of mass destruction wireless via Windows, Mac OS X and Ubuntu (I know that it is not listed as compatible in the specifications). I can connect to my DMP without problems via wifi, but I do not see i