(Redirected) Alienware is unresponsive and the power seems to fade in and out

Similar Questions

• (Redirected) Alienware for recording and playing World of Warcraft

  I am considering buying an Alienware Aurora to play world of Warcraft, but I also intend to record and make the game You-Tube videos, someone at - it experience with the appearance of the recording and the Aurora? Its an expensive system and I cannot spend all that money and not being able to do what I need.

  Hi Coyoteowl,

  Please repost this in the forum of the Alienware club for faster assistance.

  http://en.community.Dell.com/Owners-Club/Alienware/

• (Redirected) ALIENWARE AREA 51 AND GTX 1080

  hi, do you know if in the future there will be the opportunity to buy the Alienware Area 51 already with the GTX 1080 ? ( single double or triple )
  

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Alienware x 51 R3, the cpu fan remains constant at 9%

  Hello

  I noticed the thermal control cpu fan turns around 1.1 k rpm, even when everything warms up to 80 c. Is there a way to increase the speed of the cpu fan? Perhaps other solutions for that?

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) Alienware X 51 R2 graphic card and brick power

  Hey everyone I would like update my graphics card for a 950 witch, my father had this befor and he called for you guys to see if we can upgrade the card on it and your tech said yes sp it is possible with a power brick and a limit on the card is a NVIDIA GTX 950 and I would like to know if I can get one that has 4 GB and if I can get the power to brick it cuz they say we can, but as what we found the site only has up to 330 watts not around 400 or more this card must run the sys and the card please help

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• (Redirected) problem with the power supply on Alienware X 51

  I have a problem with the power supply. I can't run all the games with good graphics, if I try to run any game, my PC turns off and a small lamp on the power supply shuts down. It began a week ago, and before it was normal.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• The right side of my screen is unresponsive and I tried hard reseting and nothing seems to work and I can not restore because my phone is locked

  Screen unresponsive

  Probably you have a defective screen.

  Either go you to Apple for a replacement of the screen.

  Or waive your out of warranty options and go to an independent mechanic known for a replacement of the screen.

• I have a Pavilion Elite M9150F and it seems that the ignition button does not work. The power light is on

  My Pavilion Elite M9150F P/N KC880AA-ABA running Windows Vista Home Premium 32 bit. The device turns on no switch or remote control. He lite is turned on and power is running through the unit until button (checked through AC voltage detector) are there known issues with these? Are there spare parts? It doesn't hang or move the last time it was turned on. What are my options? Thanks for any help.

  Hello cello6996
  
  You are in warranty? If so, I would suggest contacting HP. If you are out of warranty, follow the steps below.
  
  How does a power button is essentially that it shorts two special pins. This short film is a signal to the power on the power supply and all components. A quick Google search reveals the most common method to do this is to disconnect the wires to the pins on the motherboard power button and then tap a screwdriver against just these two pins. Use gloves as a precaution. or a screwdriver with an insulated handle.
  How to bypass the power on button on pc
  Is there a way to bypass the power switch?
  
  If the computer starts correctly something wrong with the power button. If the problem persists, it is more than likely a problem with one of the hardware components and the problem will have to be isolated further. Let me know what happens.

• Shift of the computer; It seems that my laptop is lagging when it is connected to the power supply (AC adapter) and it works perfectly fine when it is NOT connected to the power adapter. Can someone help or diagnose the problem?

  This shift of computer thing had never happened before until about a week ago. The shift comes every 30 seconds or more and it occurs also when I switch between applications.

  Hello

  I saw this kinds of problems occur with the power strips and even UPS systems. And some similar questions have
  been solved using them actually, especially the UPS. If the power strip has important circuit protection
  He'll probably bad or you have very low power at first on this AC circuit.

  Solution is not to use the tape and maybe get a UPS with brown-out solution.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• macOS Sierra - press and hold the power button to enter the mode 'sleep'

  I recently updated my MacBook Air (13 inch, early 2015) model of El Capitan macOS Sierra 10.12. Before the update, hold down the power button / stop for 2-3 seconds, put the machine in standby mode. It does not properly after the update. Release the power button to switch to sleep mode works only once after each time you start the machine.

  I know he has an option to set the mode of sleep using Ctrl + button / stop and by selecting one of three options to restart, sleep and Shutdown, but who needs 3 more click click and is not fast. Also, independently of any application that is open, pressing the button walk / stop worked fine before the update, but now I need to be on the desktop even do Ctrl + Power button work.

  All patches available for it? Miss me the old way of put my Mac to sleep I do not remember if I did some tweak in my Mac, or was it a default feature...

  Greetings jainam2209,

  Thank you for using communities of Apple Support. It seems you want to put the Mac to sleep, but it does not always work.
  I would recommend read you these articles, the first article explains the ways that macOS Sierra is supposed to go to sleep.
  The second article can help if the computer won't sleep when you're trying to sleep.
  

  macOS Sierra: put your Mac to sleep

  macOS Sierra: If your Mac won't go or stay asleep

  Take care.

• DeskJet 932C - the power light is on and the cartridge flashing

  Hello! I know my DeskJet 932C is 'old', but it seems to be in excellent condition.  First time that I had a problem.  The power light is on and the cartridge is flashing.  When I open the cover, the plateau of the cartridge moves to the far left.  The arrow points to the unfortunate color cartridge.  The missed years ago color cartridge.  I use my printer to print B & W, so I've been printing with the empty cartridge in place for years.

  I removed a reinserted the color and B & W cartridges and turn on the power and turns off.  I used the HP print and scan doctor, and it's scan does not have something wrong, I clicked on print a test page, and nothing happens.  The test page is listed as 1 document in the queue.   Status: error - printing.

  The printer has been in its current position on my desk for years.  It was not known of any trauma... None does damage... no power failure.  It's clean.  Has been connected to 4 laptops and uninterrupted service.

  I prefer not to buy a new color cartridge.

  Would appreciate help.  I would like to know what it means and if there is a solution.

  Thank you!

  Focus21

  The printer will perform electrical cartridges to light control and a few other times.  If an error printing can be blocked to avoid damaging the printer.  Clean the contacts of the cartridge as shown in the document here can solve the problem, otherwise you will probably need to replace the color cartridge.  The 932 Deskjet will allow printing with an empty cartridge, but for years, the cartridge may fail electrically and needs to be replaced.

• My new MacBook Pro unresponsive during the whole upward. Waited 30 minutes and turn again. What now?

  LLE MacBook Pro unresponsive during the implementation. Checked the online help and followed the advice to wait for 30 minutes, but always turn. What should I do now? Very impressed!

  Stopping and restarting. If necessary, stop by pushing and holding the power button down until what it disable and then release press to reboot.

• Trying to find the plug and the power upgrade in a HP Pavilion Elite m9177c

  First time posting here so I hope I chose the right place for my question.

  I currently have a HP Pavilion Elite m9177c as a tempoarily computer until I can build my own. He was works fine but I found that this computer for all its good specs has only a 8500GT no idea why parent obtained through costco and gave it to use when my dell power supply gone bad and must be replaced.

  So I chose an EVGA 9800 GT

  http://www.Newegg.com/product/product.aspx?item=N82E16814130534

  But I discovered that my HP probably has just one power 350 watts (checked online still need to open the case to be exact, before buying it) while the card requires 400 watts accoring to the details.

  I tried to call HP support for dimensions and wattage supply type, but it was a chore. One guy said all the power supplies have the same size (maybe he meant the hp ones for my computer, but he never said so), another guy told me that without a guarantee that he could not even tell me the power and the third Lady said my dimensions are 9.6 inches by 9.6 inches or 24 centimeters. (do not know if she was trying to give me a microatx measure and I misunderstood the 3 as a 9 or what.) And the first guy claims it was a micro-ATX Power Supply, while the other comes from say atx.

  So after some googling I found these links

  1. http://www.censuspc.com/HP-Hewlett-Packard-5188-2859-350-Watt-SIRAH-350-Replacement-Desktop-PC-Power... - this seems to be what I have but he calls it the ATX 12v version

  2.http://www.911forpcs.com/5188-2859.html - this seems to be something I could go too, but I don't know if I might be better off with a full-on name brand like Corsair.

  3.http://support.hp.com/us-en/document/c01736200 - this is a different model of Pavilion Elite but so far it looks like mine how. The same video, for some reason any does not exist on the page for my model.

  I found two feeds that seem to fit the same dimensions as in link #1, but a larger 0.1 inch on a measure, but I hope that my hp case allows a slight wiggleroom.

  1. http://www.newegg.com/Product/Product.aspx?Item=N82E16817139028 - a 600 watt Corsair

  2. http://www.newegg.com/Product/Product.aspx?Item=N82E16817153151 - a 530 Watt Thermaltake

  Was just curious to know if anyone has better info on what exactly is in my case, and what is the best food to buy. I still intend opening the case before buying but just moved and such and call help tech kind of wore out me. I wanted to anyway just say that the computer has been much less the thing of the graphics card. Thank you

  Hello

  Type HP power supply (PSU) dimensions for cabinets mid-turn are: 5.9 by 3.4 by 5.5 inches.  If you get a power supply that is longer you might have problems of space between the PSU and the optical drives.  In addition, there are a stabilizing latch that cannot secure the PSU of stirring. This is a minor issue you should aware of your PC should be buy a power supply which is longer than the typical POWER HP block.

  The Corsair and both Thermaltake excellent food.  I would give the go-ahead for the CX600 Corsair ($50 after rebate) based on the cost, the total power available and the efficiency rating.

  This power supply is typical for your PC based on the part number indicated by HP PartSurfer.

• Loud beep and the power on / off power during installation of the operating system 10.11.2

  Someone else did this happen to them? My MacBook Pro (early 2011) making a loud beep sound and the power and turn off several times while he was installing the new os 10.11.2 update this morning? Everything seems to work fine, I've just been caught unawares. I've never had such a thing happened to me in updating my mac. Someone else?

  can happen

  I think the install dialog says that the mac can shut down and put into service once more.

  If its works well it should be good.

• Pagefile.sys has completely disappeared. It started when the power failed and my computer crashed.

  My pagefile.sys has completely disappeared. This all started when the power failed and my computer crashed.
  I get the message that he was away, I went to the performance and settings and tried to change custom settings & re-start.

  No matter what I do, nothing works. I lost several hours of visiting sites for tips and nothing seems to help.

  I was told when re-boots WinXP it creates the new file pagefile.sys and I should delete the pagefile.sys file may be corrupted on the C drive.

  So I put the folders to show hidden files and delete pagefile.sys. I have re-set and tried to recover with no success.

  There is now absolutely no pagefile.sys on my C drive. Anyone know how I can get back my pagefile.sys?

  I want to get my virtual memory works again?

  Thank you very much in advance!

  I'd start first with the chkdsk/r.

  Don't forget - if you have a factory installed recovery Partition, fixmbr will scan it as the Master Boot Record that written XP will equal not the MBR installed by the factory, so first run chkdsk /r (did I say that already)?

  Here are some instructions:

  http://pcsupport.about.com/od/fixtheproblem/SS/RCONSOLE.htm

  Where people have no XP bootable media, here are my instructions:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.