Failed connection SupportAssist

Similar Questions

• my Macbook just stop to connect to one of my yahoo email (failed connection) accounts can I connect on all my other devices

  my Macbook just stop to connect to one of my yahoo email (failed connection) accounts can I connect on all my other devices

  Delete and re add the password for that account or delete and re add this email account.

• Test the connection to the database failed: connection to the server could not

  I have one of my servers HPOV NNMi 9.23 restarted this morning and NNMi is loading is no longer.  I see the following errors in the newspapers said:

  /var/opt/OV/log/NNM/public/nmsdbmgr.log

  06/04/2015-09:28:05 connection to the database test failed: connection to the server could not: connection refused
  The server running on host "127.0.0.1" and accept
  TCP/IP connections on port 5432?

  /var/opt/OV/log/NNM/public/postgres.log

  2015-04-06 09:25:55.312 EDT: 8580:0LOG: could not translate the hostname "localhost", "5432" service at the address: name or service not known not

  2015-04-06 09:25:55.312 EDT: 8580:0WARNING: could not create listen to "localhost".

  2015-04-06 09:25:55.312 EDT: 8580:0FATAL: could not create TCP/IP sockets

  I have checked/etc/hosts and found the following entry:

  #; Local
  #;
  127.0.0.1 localhost

  The command line, I can ping localhost without problem.  Not sure why NNMi begins not at this point.

  Turns out be the permissions on the file/etc/hosts.

• failed connection

  failed connection

  Hello

  You are running Microsoft Security Essentials?
  What operating system? Prior security software? No matter what security software installed again?

  A possible reason for this problem is that you have installed entirely or partially on the PC security software conflict.

  You may need to use a cleaning tool to remove your prior security software:
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91

  If this fails to solve the problem, open an email support incident:
   
  To open an email support incident, start here:
  https://support.microsoftsecurityessentials.com/

  I would like to know if this helps

  Elvis

• "When I tried to sign on the computer, I get the following message: the user profile service service failed connection, failed to load the user profile.

  "Whenever I tried to sign up with my password to connect, do the following: the user profile service service failed connection, failed to load the user profile" when I click OK, it disconnects... Help, please

  Go to Safe Mode and do a system restore. See the link below:

  The user profile Service has not logon. User profile cannot be loaded
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-user-profile-service-failed-the-logon-user/995955f8-d9d4-4148-840D-c896c3be78b8

  Follow the links on the post.

• TAC +: TCP/IP open to 10.20.17.2/49 failed - connection has expired; remote host does not

  GANYMEDE + configured on the router and the router is in ACS.  I can ping from the ACS, but the router cannot establish a connection to authenticate users.

  AAA server Ganymede group + hq_acs-1

  Server 10.20.17.2

  Ganymede IP source-interface GigabitEthernet0/0

  !

  AAA authentication login default group Ganymede + local

  AAA authorization config-commands

  AAA authorization exec default group Ganymede + local

  AAA authorization commands by default group Ganymede + local 10

  AAA authorization commands 15 default group Ganymede + local

  nested AAA accounting

  AAA accounting newinfo periodic update 60

  AAA accounting auth-proxy default start-stop Ganymede group.

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  AAA accounting network default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  AAA accounting resource by default start-stop Ganymede group.

  BigTree_3945 #sh ip int br

  Interface IP-Address OK? Method State Protocol

  GigabitEthernet0/0 10.4.3.1 YES NVRAM low low

  GigabitEthernet0/1 10.12.10.26 YES NVRAM up up

  Serial0/2/0 unassigned YES NVRAM low low

  Serial0/2/0.602 10.12.15.10 YES NVRAM low low

  11:08:13.673 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment

  11:08:13.673 Apr 13: MORE: treatment demand beginning 79 authentication id

  11:08:13.675 Apr 13: MORE: authentication start package created for 79 (cisscdb)

  11:08:13.675 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:13.675 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout

  11:08:18.676 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired

  11:08:18.676 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning

  11:08:18.676 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response

  11:08:25.834 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment

  11:08:25.834 Apr 13: MORE: treatment demand beginning 79 authentication id

  11:08:25.834 Apr 13: MORE: authentication start package created for 79 (cisscdb)

  11:08:25.834 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:25.834 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout

  11:08:30.836 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired

  11:08:30.836 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning

  11:08:30.836 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response

  11:08:43.689 Apr 13: TAC: using default Ganymede groups ' Ganymede"list."

  11:08:43.689 Apr 13: TAC +: opening TCP/IP 10.20.17.2/49 Timeout = 5

  11:08:51.057 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment

  11:08:51.057 Apr 13: MORE: treatment demand beginning 79 authentication id

  11:08:51.057 Apr 13: MORE: authentication start package created for 79 (cisscdb)

  11:08:51.057 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:51.057 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout

  11:08:54.692 Apr 13: TAC +: TCP/IP open to 10.20.17.2/49 failed - connection has expired; remote host does not

  11:08:54.692 Apr 13: MORE: Queuing AAA accounting request treatment 76

  11:08:54.692 Apr 13: MORE: treatment of the accounting application id 76

  11:08:54.692 Apr 13: MORE: sending AV task_id = 332

  11:08:54.692 Apr 13: MORE: sending AV timezone = EDT

  11:08:54.692 Apr 13: MORE: AV = shell shipping service

  11:08:54.692 Apr 13: MORE: sending AV start_time = 1334329734

  11:08:54.692 Apr 13: MORE: sending AV priv-lvl = 15

  11:08:54.692 Apr 13: MORE: sending AV cmd = show logging

  11:08:54.692 Apr 13: MORE: request for accounts created for 76 (n20j03t)

  11:08:54.692 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:54.692 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: started 5 sec timeout

  11:08:56.058 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired

  11:08:56.058 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning

  11:08:56.058 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response

  11:08:59.693 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: expired

  11:08:59.693 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: expired, cleaning

  11:08:59.693 Apr 13: 1/HIGHER (0000004C) / 20FD90EC: the package of treatment response

  BigTree_3945 #.

  The AAA Client IP address	10.4.3. * 10.12.15.10
  Key
  Group of network devices	Test NJT AccessLink (Not assigned)
  Authenticate using	GANYMEDE + (Cisco IOS) RADIUS (Cisco Aironet) RADIUS (Cisco BBSM) RADIUS (Cisco IOS/PIX) RADIUS (Cisco VPN 3000) RADIUS (Cisco VPN 5000) RADIUS (IETF) RADIUS (Mount) RADIUS (Juniper) RADIUS (Nortel) RADIUS (Sepi)
  Connect GANYMEDE + single AAA Client (stop recording in accounting in case of failure).

  The 10.12.10. range * is listed under the HQ site.

  Your help is greatly appreciated.

  You said that you can ping the router ACS, have you tried the GigabitEthernet 0/0 interface packages (that is those THAT GANYMEDE + will attempt to use, given the configuration you have posted) supply?

  What is the network path between the router and look like ACS (IE, a firewall, NAT, etc.)?

  Can you connect to port 49 to the IP address of the router GBA, GigabitEthernet 0/0 of supply packages?

  Using VRF?

  Which version of IOS?

• External module CEAP CINEWARE SceneLayer: CINERENDER - failed connection (5027 & 12)

  Hello

  I have this error when I want to create a Maxon Cinema 4 D file.

  External module CEAP CINEWARE SceneLayer: CINERENDER - failed connection (5027 & 12)

  That do I do? Thank you

  Hello

  I had this error in after effects CC, as a result of an update.

  Site of I found a solution on the: CreativeCOW

  "Go in the effect controls panel and click Cineware Options

  Under the TCP CINEWARE PORT mine has been set at 5030 and I changed it to 5027, and now I see my CD4 layer in AE"

  It works!

• Get the "failed connection: incompatibility of username/password when you use IE accessing the page of Configurator vco.

  When configuring a device to vCO 5.5.2 I can't login the configuration page https://:8283/ using IE as your browser. I constantly get the message: ' failed connection: incompatibility of the username/password or account temporarily blocked after too many failed attempts. But not changed the error even after that I changed the password. Suresh -

  Use a different browser (Firefox or Chrome) and it will work ;-)

  Kind regards

  Marc

• javax.xml.soap.SOAPException: Message send failed: connection reset

  Hello gurus,
  
  I try to install IAM on a cluster deployment. I have a physical as a front-end load balancer, which ensures the load to alternately between the two servers where IOM managed servers are deployed.
  When I try to start an approval process, SOA server seems to not be able to connect to the servers of the IOM, which gives the following error:
  
  < 23 April 2012 12:01:11 CEST > < error > < oracle.integration.platform.blocks.soap > < BEA-000000 > < could not send request to http://identitymanagement.mydomain:14000/workflowservice/CallbackService because of the exception
  javax.xml.ws.WebServiceException: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: Message send failed: connection reset
  at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:851)
  
  where < identitymanagement.mydomain > is the host name of the cluster. Maybe SOA calls are directed in the timeout while trying to connect to the IOM (cluster balancing algorithm times), so, considering that Web services take time to answer (say 10 min), I want to know if there is such a setting on SOA to configure so that it never go into the time-out in the meantime that web services to answer.
  
  Thank you
  Carole

  Ejani,

  If you want to confugure time-out, see as follows:
  Re: Asynchronous BPEL 2.0 problem - Transaction rolled back to

  But I'm not sure that it is on the side of the soa. Try to increase the parameters of time-out on the (Bounce the server SOA) load balancing

  Arik

• Could not get the email, get the error number: 0x800CCC0E, failed connection

  Receive a msg of error Outlook Express (XP) as shown.  Just started recently. Must reboot to fix, then it repeats. Any difficulty?

  Receiving the msg to Outlook Express error as follows: failed to connect to the server. Account: 'ted.tedramsdell', server: 'smtpout.secureserver.net', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10061, error number: 0x800CCC0E.

  Any help will be appreciated.

  This account worked before without any changes:

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for many AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck e-mail scanning when the option is available.

• Unable to connect SupportAssist, save button does not work

  I installed SupportAssist, but I can't connect it. I click on the 'register' button, but nothing happens. I've tried uninstalling and reinstalling, SupportAssist to no avail. Still can not register. Can anyone help?

  Hello

  Can you tell me what version of SupportAssist are you using? In addition, it will be good if you can share a screenshot of the page where you are facing this problem.

  Concerning
  Aniruddha S

• Used to install Flash Player: "failed connection".

  Hello

  I tried a dozen times to install the latest version of Adobe Flash Player, but it won't happen. I keep getting 'connection failed. Click Retry to resume the installation', and when I click on start, nothing happens. I tried redownloading Flash Player and try again but still the same problem, as well with Firefox (43.0.2) and Safari (8.0.7). I thought that it might be Intego NetBarrier causing the problem, but even when I allow all incoming internet connections with it, the Flash problem still happens. (iMac OS10.10.4).

  Can someone please help?

  Hello

  I will need to get an installation log files from your part to continue the investigation.  Please read the FAQ where can I find the Flash Player on Macintosh Setup log? and provide all the 4 files listed (install.log, FlashPlayerInstallManager.log, Adobe_ADM.log and Adobe_GDE.log).  Download the files in cloud.acrobat.com using the instructions How to share a document or your choice of file sharing service.  Post the link the files downloaded in your response.

  You can also use the installation program offline posted at the bottom of the Installation problems | Flash Player | Mac page in the section "problems".  However, without the installer online logs we will not be able to solve the problem to solve.

  Thank you.

  --

  Maria

• Failed connection business rule

  I am trying to execute a business rule in the EA. However, when I connect Essbase and when I clcik the more in front of the business rule, it gives a message "connection failed rule Business."
  Also, when I go to HSS, I see the item called HP... tab business rule. So what could be the reason?

  It might be interesting to go through the following article in Oracle Support - "Troubleshooting Hyperion Business rules Issues [ID 763345.1]"

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• NB510 - failed connection user profile cannot be loaded

  Out of the blue my NB510 will not connect me and so to load my computer at all. When I get the password to my profile, what happens with the message error "the service user profile Service has no login, cannot load user profile".

  Any information would be massively appreciated that I have to write a thesis on my NB510 as soon as possible!

  Hello

  It is that Microsoft related question to verify please http://support.microsoft.com/kb/947215
  Googling around you can find many Microsoft articles and forums on this issue.

• Satellite L50D-B - 14 p - failed connection Bluetooth speaker

  My L50D-B - 14 p suddenly decided that it cannot find my bluetooth speaker.
  It was working fine until yesterday.

  Can anyone help?

  Well, what shall I say to that?
  I think first of all you must check if your BT external speaker system isn't defective.

  Check if you can plug this BT speaker to another computer.
  In which case it will work, the BT speakers shouldn't be a problem.

  As next, you need to check if the s mobile BT connection is enabled and that you can pair and connect other BT devices correctly.
  Where this is possible, it causes must be linked to problems of configuration between the BT speakers and laptop.

  It is very important that BT has been activated using the function key s notebook (Fn + F12) or in the settings/options Windows BT.