Failed to connect to client host vsphere and Vcenter also esxi.
Hi all
I am trying to connect to the ESXi 5 of vsphere client host. I get the error message:
vSphere client cannot connect to < ip > an unknown connection error has occurred. (The request has failed because the remote server has taken too long to respond. (L'opération a expirer)).
and of VCENTR I am trying to add this host. I get the error. Of"request timed out".
I can connect to the shell of ESXi and restart the vpxa services and spend. I can ping to esi IP host. but just cannot connect to it.
earlier, he the host showed as disconnected in Vcenter. I tried to plug it failed. so I took it off I think can re add back. It did not work.
I can just connect to client as esx host.
kindly advice.
Thank you
Hello
I am able to connect now.
I noticed as I said previously, unable to connect to the localhost error when running esxcli. Unable to connect using the vsphere client. Unable to connect using VCenter.
So I started to dig that's wrong with the OS esxi. and began running a few commands information esxcfg etc file system use of space, inode inconsistency, a few other commands such vdh, df to check the file system. . and but has not changed anything. network configuration is correct.
in these I run services.sh reboot, restart vpxa, pass reboot, restart host, check the logs, vmkernel, vpxa newspapers spend., check the date and time of the host. I couldnot Firewall check since esxcli did not work. I haven't checked listed above step on the SSO.
If you type esx and double tab, you will see many orders. I started testing on these orders. so esxcli was a single command I tried later. It worked all of a sudden.
Once esxcli has started working, I checked vsphere client to connect to esx host that it worked. then I was able to connect in Vcenter also.
Thank you for your support
-Caroline
UNITED ARAB EMIRATES
Tags: VMware
Similar Questions
-
Unable to connect the client via vsphere ESX host
Dear team,
Once I tried to connect to client host via vsphere ESX I m getting following error.
VCenter version: 4.1.0 345043
vSphere client: 4.1.0 345043
ESX Version: 4.1.0 721871
You help me on the same request.
concerning
Mr. VMware
It is usually advisable, but not an obligation, to have the build of your version of vCenter client correspondence.
You can see the Interopabilty matrix for supported configurations
http://PartnerWeb.VMware.com/comp_guide2/SIM/interop_matrix.php
-
client vSphere and vCenter server
The vsphere compatibility page 14 OS compatibility tables. I see that Windows 2000 server sp4 has no compatibility with client vSphere and vCenter server. This means that if you have 2000 servers in your current VMware environment you must upgrade the operating system or?
Hello and welcome to the forums.
Information on p.14 means that Windows 2000 SP4 is not compatible with (in other words, you can not install) the Client vSphere, vCenter Server and VMware vCenter Update Manager.
Specific versions of Windows 2000 Server can be verified to support in the Compatibility Guides. As long as you plan to run the Client vSphere, vCenter Server or VMware vCenter Update Manager on Windows 2000 virtual machines, you'll probably be fine. It depends on which version of Windows 2000, you have, but just check the compatibility guide to be sure.
Good luck!
-
I have a Canon 7 d Mark II and I'm using Lightroom version 5.7.1 on a Mac computer. My question is, I can't get attached to my computer. Lightroom and my computer recognizes my camera, but the connection did not last long and she also gets lost connected, then lost several times until the capture of attachment option is closed. I tired buy new cables, lightrooom and call Update to Canon support, but still nothing works for me please help?
Hi Martin,
In order to make shooting with the Canon 7 D Mark II captive, you need Lightroom 6 and higher.
Please visit the following link: a list of cameras that can be attached to Lightroom.
Kind regards
Tanuj
-
Desktop vSphere and vCenter Desktop
The Horizon Suite includes Desktop vCenter and vSphere Desktop?
I see in the description of the product Horizon Suite includes 'View of the Horizon', but we know not if it's the 'Horizon view Bundle', which includes vSphere and vCenter, or the "Horizon view add-on", is not.
Anyone can clarify that for me?
Thank you
Yes more horizon will include office and Desktop vSphere vCenter.
This will give you a better clarification
-
Known issues with running ESX, vSphere and vCenter Lab Manager on a Windows Server?
I'm on a project that is currently planned to install ESX, vSphere and vCenter Lab Manager on a Windows 2003 R2 Enterprise x 64. Anyone know if there are known problems with their performance on a beefy Server?
http://communities.VMware.com/community/VMTN/vSphere?view=overview and take a look at podcasting.
-
One migrated from my virtual machine to another host VSphere and it does not start
I have a virtual machine that I've initially converted to Hyper-V to host VSphere. After I did it would start very well, but I got up two errors when starting.
"An IDE controller is found but the VM does not support the option" and
"A plate supporting the option not found."
When I looked at the hard drive in the settings it looks like it is not supported. Is it because I badly converted to Hyper-V to VSphere using VMWare Converter?
But now, I configure VCenter Server and tested a migration of these machines to another host and using the VSphere Client. It does not start now. I get an error message that says.
"Device 'drive hard 1' uses a controller that is not supported." This is a general limitation of the compatibility of the virtual machine with the selected host ESXi version. »
Remember that it is the same VSphere host it is running on initially. Any suggestion would be appreciated.
If it works now - is that correct? n ' forget not to award points useful and/or correct
I removed these entries;
ide0:0. FileName = 'PIC-JVM-v0001 - 000001.vmdk ".
IDE1:0. Present = 'TRUE '.
IDE1:0.clientDevice = 'TRUE '.
IDE1:0. DeviceType = "cdrom-raw"
IDE1:0.startConnected = "FALSE".
ide0:0. Redo = «»
IDE1:0. FileName = ' / usr/lib/vmware/isoimages/windows.iso '.
scsi0:0. DeviceType = "scsi-passthru.
scsi0:0. FileName = ' / vmfs/devices/cdrom/mpx.vmhba1:C0:T0:L0 '.
scsi0:0.allowGuestConnectionControl = "FALSE".And added to them;
ide0:0.clientDevice = 'true '.
ide0:0. DeviceType = "cdrom-raw"
ide0:0.startConnected = "false".
scsi0:0. FileName = 'PIC-JVM-v0001 - 000001.vmdk ".
scsi0:0. DeviceType = "scsi-disk" hard
scsi0:0. Redo = «»Although there is a high probability that the other six you have to do will be similar to this, they will have to be assessed individually and modified accordingly.
See you soon,.
Jon
-
who can tell me the most recent version number of the Client vSphere and vCenter.
who can tell me the latest version number of vShpere customer and vCenter?
The previous issue are the latest version (4.0U1).
A way of knowing the last build number (for a version of Ux) is to check the download site (in the Download details):
http://downloads.VMware.com/d/info/datacenter_downloads/vmware_vsphere_4/4
For works build and see also version number:
Version number and compile ESX
André
-
languages in vSphere and vCenter
Hello people,
I installed the vCenter and vSphere Client so I had to find out there is no prompt for languages. I am of the Germany, and when I finished to install vShpere on German Windows 2003 Server OS everything was in German (terrible). How these products recognize install in German? Local version of the OS, locale (those which exactly)?
However, now I've read in the description for und vSphere ESX 4.0 there is a command line option to change this:
vpxClient -locale en_US
First of all, how to run this command, because I have no experience with CLI?
Secondly, it sets the language settings for each client that will connect in the future and vCenter itself?
Thirdly, this fix, the language setting in the Client vSphere for each text, because I also saw phenomena, that most of the text is in English, but the description of the task and vSphere lLogonscreen is in German.
Hello.
First of all, how to run this command, because I have no experience with CLI?
In Windows, you can start-> run the following command:
vpxClient.exe - local-en - U .S.
VpxClient.exe running in Start menu-> Run would be the equivalent of the double click on the shortcut on the desktop or the Start Menu. You can also create a shortcut with these included switches, or changing the text already there.
Secondly, it sets the language settings for each client that will connect in the future and vCenter itself?
Each customer must launch the application with the above switches.
Thirdly, this fix, the language setting in the Client vSphere for each text, because I also saw phenomena, that most of the text is in English, but the description of the task and vSphere lLogonscreen is in German.
It probably won't fix everything. Plugins and other items may present as expected.
Good luck!
-
vSphere and vCenter license price is based on the YEAR?
Hello
Even if I already know as the product of vSphere and so forth and I am familiar with other virtualization technologies (I will avoid to mention here), I would like to ask about the license costs.
Currently, we use various stand-alone vSphere servers (sometimes evaluation license and a free license for 5.5), but I would like to have vMotion Metro and subnet rather than in private solutions like 'Veeam' quick migration, etc.
I went to see the costs... which are generally extremely high, but then I realize that the cost is basic 1 year or 3 years, which means that all VMWare license costs are billed ANNUALLY?
I mean, if I have 3 hosts ESXi and a cVenter with cost € 4000 will be € 4000 per year? I think it's crazy.
Can anyone confirm?
Concerning
Hey,.
When you buy the license first, you pay X amount, which includes the license to base 1 or 3 years Support and subscription (SnS).
After this time, you pouvez renew your SnS for amount Y. For vSphere, one year basic Support is about 10% of the initial report and if I remember correctly.
But you don't have to renew the SnS, your software will continue to work.
SnS assets allows you to call VMware and leader in applications for support and very important: you can upgrade your license to the new major version keys when it comes out.
If for example you can improve your keys of vSphere vSphere 5 6 keys subsequently.
Tim
-
I7 2600 k P8H67-i Deluxe MB and vCenter Server ESXi 5 appliance
I7 2600 k P8H67-i Deluxe MB and vCenter Server, 16 GB, and ESXi 5 device
One has been able to run vCenter Server Appliance on this material?
vCenter Server Appliance does not start
I run ESXi 4.1 on a server and more office built a user-friendly machine for ESXi 5
ESXi 5 start ok, installs and runs a test VM ok.
But after downloading appliance vCenter server and deployed the ovf, the virtual machine will not start.
I'm reasonably confident that the deployment was OK, as I've done it before on ESXi 4.1 (but on a server with Xeon processor).
The message of the console is
Message of the Virtual Machine
This virtual machine is configured for 64-bit operating systems. However, 64-bit
operation is not possible.
Longmode is disabled for this virtual machine
For more information, see http://vmware.com/info?id=52
Continue without 64 bit supportYes
NO.
If I select 'No', I get 'not enough video RAM.
If I check the box 'Yes' I get
This kernel requires an x 86-64 processor but only detected an i686 CPU.
Could not start - please use a kernel suitable for your CPU.I've been through settings and advice re longmode, but just can't get the right settings.
Thanks in advance for any response
In order to run the 64-bit clients, you need to enable 'VT - x' in the system BIOS. In addition to this I also recommend you activate "Execute Disable Bit" and - if necessary - disable "VT - d" as well as "Trusted Execution". Once done, save the BIOS settings and the power of the system (power power off) cycle. If this does not resolve the problem, thanks for posting the latest vmware.log of the virtual machine.
André
-
Thunderbird - fails to connect to a hosted system of Google Mail
OS: Win 8 / Thunderbird 31.5.0
A few nights - all on the Thunderbird IMAP connections failed with the error: "connection to server < email name > failed.
Since then, I have:
- tried to remove the account and add it again
- tried to reinstall Thunderbird
- Delete the profile and the profile manager used to create a new.
Nothing did.
I've pasted below the imap log output:
4148 [ea26e60]: ImapThreadMainLoop enter [this ed7b800 =]
0 [250f140]: ed7b800:imap.googlemail.com: NA: SetupWithUrl: IMAP_CONNECTION_IS_OPEN of compensation
4148 [ea26e60]: ed7b800:imap.googlemail.com: NA: ProcessCurrentURL: enter
4148 [ea26e60]: ed7b800:imap.googlemail.com: NA: ProcessCurrentURL:imap://user%40google-hosted%[email protected]:993/select%3E%5EINBOX: = currentUrl
4148 [ea26e60]: ReadNextLine [stream = e6e5428 nb = 0 needmore = 1]
4148 [ea26e60]: ed7b800:imap.googlemail.com: NA: CreateNewLineFromSocket: compensation IMAP_CONNECTION_IS_OPEN - rv = 804b000e
4148 [ea26e60]: ed7b800:imap.googlemail.com: NA: TellThreadToDie: close the socket connection
4148 [ea26e60]: ed7b800:imap.googlemail.com: NA: CreateNewLineFromSocket: (null)
4148 [ea26e60]: ed7b800:imap.googlemail.com: NA: ProcessCurrentURL: abandoned in queue URL
4148 [ea26e60]: ImapThreadMainLoop leaving [this = ed7b800]
3964 [885ec50]: ImapThreadMainLoop enter [this 8ce4800 =]
0 [250f140]: 8ce4800:imap.googlemail.com: NA: SetupWithUrl: IMAP_CONNECTION_IS_OPEN of compensation
3964 [885ec50]: 8ce4800:imap.googlemail.com: NA: ProcessCurrentURL: enter
3964 [885ec50]: 8ce4800:imap.googlemail.com: NA: ProcessCurrentURL:imap://user%40google-hosted%[email protected]:993/select%3E%5EINBOX: = currentUrl
3964 [885ec50]: ReadNextLine [stream = 8 d 47108 nb = 0 needmore = 1]
3964 [885ec50]: 8ce4800:imap.googlemail.com: NA: CreateNewLineFromSocket: compensation IMAP_CONNECTION_IS_OPEN - rv = 804b000e
3964 [885ec50]: 8ce4800:imap.googlemail.com: NA: TellThreadToDie: close the socket connection
3964 [885ec50]: 8ce4800:imap.googlemail.com: NA: CreateNewLineFromSocket: (null)
3964 [885ec50]: 8ce4800:imap.googlemail.com: NA: ProcessCurrentURL: abandoned in queue URL
3964 [885ec50]: ImapThreadMainLoop leaving [this = 8ce4800]
3056 [ea26a70]: ImapThreadMainLoop enter [this 7deb000 =]
0 [250f140]: 7deb000:imap.googlemail.com: NA: SetupWithUrl: IMAP_CONNECTION_IS_OPEN of compensation
3056 [ea26a70]: 7deb000:imap.googlemail.com: NA: ProcessCurrentURL: enter
3056 [ea26a70]: 7deb000:imap.googlemail.com: NA: ProcessCurrentURL:imap://user%40google-hosted%[email protected]:993/select%3E%5EINBOX: = currentUrl
3056 [ea26a70]: ReadNextLine [stream = 8 d 47888 nb = 0 needmore = 1]
3056 [ea26a70]: 7deb000:imap.googlemail.com: NA: CreateNewLineFromSocket: compensation IMAP_CONNECTION_IS_OPEN - rv = 804b000e
3056 [ea26a70]: 7deb000:imap.googlemail.com: NA: TellThreadToDie: close the socket connection
3056 [ea26a70]: 7deb000:imap.googlemail.com: NA: CreateNewLineFromSocket: (null)
3056 [ea26a70]: 7deb000:imap.googlemail.com: NA: ProcessCurrentURL: abandoned in queue URL
3056 [ea26a70]: ImapThreadMainLoop leaving [this = 7deb000]Any help - greatly appreciated.
After that - it's so the router!
It turns out that the router has a 'Firewall' really lame and lazy. In "high security" mode, it allows HTTP/HTTPS.
When "medium security" mode it allows IMAP, SSH, etc. -
Failed to connect to the host as the user administrator
Hi all
I am not an oracle DBA, but must fulfil a task on the oracle server.
Hi all
I have a problem when you use host of credentials (operating system login
credentials) for utility like backup, recovery setting.
When I entered the username and the word occurred then as 'connection '.
"to the host as a user 'username' failed: ERROR: wrong password for the user.
The user name and the word is true, I used it to connect to (my windows
window is Windows XP Professional)Chop the line ' NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)' know-how ' #NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)', then try the fourth step described above.
Kind regards
S.K. -
MSVC ++ 2008 error "Failed to connect to server" error 0x800703FA and error 1601
Visat SP1 32-bit computer. Tried to install MS VC ++ 2008 redistributable and got
Unable to connect to the server. Error: 0x800703FA
MainEngineThread returns 1601
Hello
I suggest you to manually install the updates in a clean boot state and check if it works very well.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a troubleshooting follow step 7: reset the computer to start as usual
32-bit version was updated link
link to updated version 64bits
Concerning
-
Hello world
I'm new on this and am frustrated at this point because most of the time, the documentation is not exhaustive. After a week that I managed to install my drive of vSphere ESX, create a vm Server 2008 and install vCenter then install and configure Orchestrator. Had a little trouble with SQL "surprise surprise" then comes into conflict with the server web and IIS. Now that things are settled nothing seems obvious or apparent.
ESX was installed directly on the server with any Microsoft OS, as I learned its more effective this way. I can't find anything on how to make backups and, especially, the converter. It is installed but is not found. Click right on the host and no Assistant import, according to the inventory tab/host anything. So again I have ESX 4.1 installed directly on my server with any MS OS, I connect via vSphere client and a virtual machine called vCenter. On this vm Orchestrator is installed and SQLEXPRESS. I saw all the tutorial there, video making repeat and I installed and configured but don't see not what Im supposed to see HELP!
Thank you for reading my rant and hiope someone can shed some light on my situation
Looks like you need to install the converter on your vCenter server. Just insert or attach the vCenter vCenter VM media you created. Launch the installation and you should see an option like this:
Once it is installed, you should be able to see it in the plugins section as follows:
Right-click on it and select activate.
If you have found this helpful at all prices please points using the correct or useful! Thank you!
Maybe you are looking for
-
Show only the time and a red relief
My watch does not show the clock face. If I press the bottom button, it will display the time and a symbol of red light.
-
Satellite P850 - Bluetooth - wireless in same range of radio frequencies
Hello world My laptop has received the following message for a while: Devices Bluetooth (TM) and WirelessLAN function in the same radio frequency range and may interfere with each other. If you use Bluetooth devices and WirelessLAN simultaneously, yo
-
I have a T60, model 1952-CTO, I work for a friend. The history of computing: belonged to a member of the family company has worked for. The company has updated / update of many laptops. The employee using the old coin had the opportunity to buy it. B
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: Why is this 100% CPU use? You have problems with programs Error messages Recent changes to your computer What you have already tried to s
-
Hello I have a COMPAQ PRESARIO CQ61 and suddenly wonder the bios admin password After 3 tries from failure, it shows a code "76317137". Anyone can calculate the right password with these data? Thanks in advance.