Thunderbird - fails to connect to a hosted system of Google Mail

Similar Questions

• Failed to connect to client host vsphere and Vcenter also esxi.

  Hi all

  I am trying to connect to the ESXi 5 of vsphere client host. I get the error message:

  vSphere client cannot connect to < ip > an unknown connection error has occurred. (The request has failed because the remote server has taken too long to respond. (L'opération a expirer)).

  and of VCENTR I am trying to add this host. I get the error. Of"request timed out".

  I can connect to the shell of ESXi and restart the vpxa services and spend. I can ping to esi IP host. but just cannot connect to it.

  earlier, he the host showed as disconnected in Vcenter. I tried to plug it failed. so I took it off I think can re add back. It did not work.

  I can just connect to client as esx host.

  kindly advice.

  Thank you

  Hello

  I am able to connect now.

  I noticed as I said previously, unable to connect to the localhost error when running esxcli. Unable to connect using the vsphere client. Unable to connect using VCenter.

  So I started to dig that's wrong with the OS esxi. and began running a few commands information esxcfg etc file system use of space, inode inconsistency, a few other commands such vdh, df to check the file system.  . and but has not changed anything. network configuration is correct.

  in these I run services.sh reboot, restart vpxa, pass reboot, restart host, check the logs, vmkernel, vpxa newspapers spend., check the date and time of the host.  I couldnot Firewall check since esxcli did not work. I haven't checked listed above step on the SSO.

  If you type esx and double tab, you will see many orders. I started testing on these orders.  so esxcli was a single command I tried later. It worked all of a sudden.

  Once esxcli has started working, I checked vsphere client to connect to esx host that it worked. then I was able to connect in Vcenter also.

  Thank you for your support

  -Caroline

  UNITED ARAB EMIRATES

• Failed to connect to the host as the user administrator

  Hi all
  I am not an oracle DBA, but must fulfil a task on the oracle server.
  
  
  Hi all
  I have a problem when you use host of credentials (operating system login
  credentials) for utility like backup, recovery setting.
  When I entered the username and the word occurred then as 'connection '.
  "to the host as a user 'username' failed: ERROR: wrong password for the user.
  
  The user name and the word is true, I used it to connect to (my windows
  window is Windows XP Professional)

  Chop the line ' NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)' know-how ' #NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)', then try the fourth step described above.

  Kind regards
  S.K.

• Failed to connect to the server? Windows Live mail error.

  I get this message:

  "The connection to the server failed.  Subject ' Fw: xxx' server: 'smtp.verizon.net' Windows Live Mail error ID: 0x800CCC0E Protocol: SMTP Port: 25 secure (SSL): Yes Socket error: 10060 "
  What can I do to send this email e-mail? I have a digital but still cannot send ID. I receive email fine.

  Use the settings recommended from Verizon. Right-click on the account name in the folders pane, and then select Properties.

  Under the servers tab, make sure that my server requires authentication is selected.

  On the Advanced tab.

  • Make sure that this server requires a secure connection (SSL) is selected for both servers.
  • Make sure that the outgoing mail port is 465 and the incoming mail port is 995.

  When you are finished, click work offline and delete all messages pending from the Outbox (below the records of account in the folders pane). Now, create a new test message and give him a single topic (e.g., trial 1). Send it to yourself and post a new message in your response.

• Oracle Grid11g on Linux el5 connection to the host as a user failed

  Hello
  
  I have 11g Linux oracle grid control.
  I have configured to monitor a target (Oracle 10 g server) on solaris 10, but I'm not able to plan backups.
  "" I get error * "failed to connect to the host as a user."
  I provided the oracle for the solaris user account details.
  
  I tried to connect to normal Enterprise Manager for the oracle 10g database and the identification of the host information has been validated.
  
  Can you advice why even host credentials failed on the grid?
  
  Help, please.

  Did you run root.sh after the installation of the agent software?

  If this is not the case, stop the agent and run the root.sh as user root script. Then, start the agent and try again.

  Concerning
  Jomon

  Published by: JohnJomon on November 10, 2011 11:42

• Get the "Failed to connect to server" error after having my hosting of emails expire and reconnected. Using the latest version of Thunderbird.

  Hi, I am probably doing something really basic and easy to fix but facepalmingly pls have patience with this n00b...
  My emails with Crazy Domains Hosting has expired a couple of months, I've just managed to get it reconnected.
  When I open Thunderbird once again, I kept getting the error msg "Failed to connect to server".
  I checked all the settings for the account, they are all fine as far as I KNOW. Updated to the latest version of Thunderbird, tried to restart the program and doesn't have the obligatory IT Crowd "troid torning it and turn it on again", still get the same message.

  Plaaaaiiss... Halllp!

  Regardless of my fault for typing. What is important is that there is nothing in the DNS or whois on the domain.

  Look at their own whois server it shows pending deletion, expired in April. http://www.crazydomains.com.au/WHOIS/littleredfoxdesign.com/#result

  Until these public information are corrected your not likely to be able to connect because Thunderbird can not find the server. There is no DNS records to point to it.

• Unable to connect to the host server: a connection attempt failed because

  Hi all

  I install my host ESX server in vmware workstation.  It works fine except when I am creating virtual machines.

  I'm not able to install the operating system on the virtual machine and I get this error that appears inside the virtual machine.

  Unable to connect to the host server: a connection attempt failed because the connected party did not respond after a certain time, or established connection failed because connected host has no

  to answer.  Do you want to retry?

  My ESX server hosts have static IP addresses.

  I've seen a few similar posts on this issue, but their solutions have not worked for me.

  Best regards

  Nathan

  I think we confuse you.  ESX server is running like a machine virtual within the workstation, correct?  If Yes, then you must edit the vmx esx server with these entries monitor configuration file *.  They can go anywhere in the file.  Once those have been added, you should be able to run 32-bit virtual machines within the esx server.

  -KjB

  VMware vExpert

• "Unable to connect to the MKS: unable to connect to the host [servernamehere] failed on vSphere 4.0 and client.

  Anyone have this problem?  I loaded vSphere 4.0 host ESX 3.5 and everything seems to work very well yesterday, after sleep more testings and this error arose:

  "Unable to connect to the MKS: unable to connect to the host failed on vSphere 4.0 and client.

  After a google search, I could it is resolved by placing the DNS entries on the client machine c:\windows\system32\drivers\etc\hosts file point to my ESX host name and domain name FULL name runs and it worked fine.  I'm curious to know why this went well?

  What is MKS mean in this case?  Server key from Microsoft or the key management server?

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

  When you click on the console of a virtual machine, the server that hosts the vm responds back with its host name for your client to connect to.  Thus, the MKS console could not be connected to, and you could not see the virtual machine console, until you updated name resolution.  Given that the ESX host is back with a name, the customer could not resolve the name, if your client could not connect to the virtual computer mouse, keyboard, screen.  Hope that makes more sense.

  -KjB

  VMware vExpert

• Cannot connect to the system Windows - user profile service failed to connect

  I can't connect my laptop for the 1st time

  I get an e-mail from the user profile failed to connect

  User profile cannot be loaded

  Ideas please

  If you have a Toshiba SSD in your laptop there is a problem in windows 7, making it impossible to connect to the system when the storage TOSHIBA utilities are installed. In this case, you will need to find a way to get the system and uninstalling.

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• migrate storage fails with 'unable to connect to the host.

  I'm trying to migrate storage of a virtual machine to a different data store. (on the same san)

  When I start work, I see the task:

  Moving the virtual machine / status 'in process '.

  After 10 minutes, I get 2 pop-up windows:

  -

  ---

  Error

  -

  ---

  Unable to connect to the host.

  -

  ---

  Ok

  -

  ---

  I tried to move the storage of another virtual machine, but I got the same error.

  Also tried a different vmhost (but same cluster), but also the same error.

  When you try to a host in a different cluster, it works without problem (same san/store data used in the cluster where I got the errors)

  There is no difference in the profile of security on the host computers.

  Any tips?

  Logfile attached (vpxd - 353.log) when I was running the migrate storage.

  Part of the error:

  2009-11-03 16:49:07.035 02464 info "App" (1257263347020035) VMotion began

  2009-11-03 16:58:35.903 02464 error "App" (1257263347020035) VMotion failed: vim.fault.HostConnectFault

  When it works ok:

  2009-11-03 17:29:49.470 02456 info "App" (1257265789470153) VMotion began

  Hello.

  See KB 1010837.

  Good luck!

• Deployment models for the new cluster - "A" failed to Connect to Host

  Hi all

  I reorganized my ESX 3.5 2 130756 machines in a new cluster (they were already members of another cluster & lt; - this can be an important factor here).  When I try to deploy new virtual machines from templates to the new cluster, almost immediately, the task fails with the error "failed to Connect to Host."  Here's what I did on troubleshooting:

  -I confirm that nothing has changed on the console host IP and DNS service on the ESX host configuration

  -restart services on the ESX host management - tried again, failed.

  -removed and added hosts in cluster - tried again once, didn't

  -disabled DRS on cluster - tried again, failed.

  -confirmed I can deploy templates to other clusters

  -confirmed I can deploy a new virtual machine custom again cluster manually

  -restart the ESX and vCenter server hosts

  -removed ESX cluster hosts and destroys Cluster and file

  -recreated cluster and added guests, same error

  I think I've tried all the basics, but please let me know if you think something else to try.  In the VirtualCenter newspapers, there are the following entries whenever the task fails:

  Unexpected exception received during the NfcCopy

  (SERVER_Template) (vim.fault.HostConnectFault) unexpected exception during clone. Abandonment.

  from the log restore

  Cancel GenericTask... Home: host-2112, task: task-19380

  Cancel CopyVmFiles... Home: host-6900, filesCopied: sanfs://vmfs_uuid:48ea35af-7a62a749-537f-001372f99c97/SERV01PILOT01/SERV01PILOT01.nvram, sanfs://vmfs_uuid:48ea35af-7a62a749-537f-001372f99c97/SERV01PILOT01/vmware-1.log, sanfs://vmfs_uuid:48ea35af-7a62a749-537f-001372f99c97/SERV01PILOT01/vmware.log, sanfs://vmfs_uuid:48ea35af-7a62a749-537f-001372f99c97/SERVER/SERVER.vmdk,.

  Cancel CreateInvtVm... vmPath: /vpx/vm/#6905 /, inDb: true, onHost: false, onDisk: false

  Cancel ReserveName... Home: host-6900, name: sanfs://vmfs_uuid:48ea35af-7a62a749-537f-001372f99c97/SERVER/SERVER.vmx

  GetPropertyProvider failed for vm-6905

  GetPropertyProvider failed for vm-6905

  Cancel CreateInvtVm... vmPath: /vpx/vm/#6905 /, inDb: false, onHost: false, onDisk: false

  Cancellation of transaction made available VM

  VDB::IsRecoverableErrorCode Unable to retrieve from HY000:0

  Clone failed: vim.fault.HostConnectFault

  FINISHING special-28370-vm-6545 - vim. VirtualMachine.clone--239A954E-3A34-435C-8F45-5DCE0F4089C2

  -ERROR task-28370-vm-6545 - vim. VirtualMachine.clone: vim.fault.HostConnectFault:

  {(vim.fault.HostConnectFault)

  dynamicType = & lt; unset & gt;

  MSG = «»

  }

  -BEGIN tache-interne-3294--hote-325--vpxdinvthostsynchostlro.synchronize

  Thanks in advance for any help!

  It seems that the model does not really know where he lives.  I am trying to convert a virtual machine model and try to run a migration on it to a host.

  Otherwise, you may need to remove the inventory model and look for the data store that it is and resave.

  -KjB

• The TCP/IP connection to the host localhost, port 1433 failed.

  Hi, im using sql Server2000,
  I said this in my program:

  Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
  String url = "jdbc:sqlserver://localhost:1433;databaseName=Factura";
  Connection conn = DriverManager.getConnection(url,"sa","");

  and gives me this exception:
  

  run:
  Got an exception! 
  The TCP/IP connection to the host localhost, port 1433 has failed. 
  Error: "connect timed out. 
  Verify the connection properties, 
  check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port, 
  and that no firewall is blocking TCP connections to the port.".
  com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host localhost, port 1433 has failed. 
  Error: "connect timed out. Verify the connection properties, 
  check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port, 
  and that no firewall is blocking TCP connections to the port.".
          at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(SQLServerException.java:171)
          at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(SQLServerConnection.java:1033)
          at com.microsoft.sqlserver.jdbc.SQLServerConnection.login(SQLServerConnection.java:817)
          at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(SQLServerConnection.java:700)
          at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(SQLServerDriver.java:842)
          at java.sql.DriverManager.getConnection(DriverManager.java:582)
          at java.sql.DriverManager.getConnection(DriverManager.java:185)
          at factura.FacturaView.conexion(FacturaView.java:317)
          at factura.FacturaView.jTextField1KeyPressed(FacturaView.java:268)
          at factura.FacturaView.access$900(FacturaView.java:41)
          at factura.FacturaView$5.keyPressed(FacturaView.java:150)
          at java.awt.Component.processKeyEvent(Component.java:6225)
          at javax.swing.JComponent.processKeyEvent(JComponent.java:2801)
          at java.awt.Component.processEvent(Component.java:6044)
          at java.awt.Container.processEvent(Container.java:2041)
          at java.awt.Component.dispatchEventImpl(Component.java:4630)
          at java.awt.Container.dispatchEventImpl(Container.java:2099)
          at java.awt.Component.dispatchEvent(Component.java:4460)
          at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1850)
          at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:712)
          at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:990)
          at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:855)
          at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:676)
          at java.awt.Component.dispatchEventImpl(Component.java:4502)
          at java.awt.Container.dispatchEventImpl(Container.java:2099)
          at java.awt.Window.dispatchEventImpl(Window.java:2478)
          at java.awt.Component.dispatchEvent(Component.java:4460)
          at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
          at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
          at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
          at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
          at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
          at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
          at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
  BUILD SUCCESSFUL (total time: 34 seconds)

  How can I solve this?
  
  Thank you...
  
  Edited by: derok December 8, 2010 13:31
  
  Edited by: derok December 8, 2010 21:14
  
  Edited by: derok December 11, 2010 13:51
  
  Edited by: derok December 11, 2010 13:52

  There's a sqlservr.exe is listening on port 1025:
  What is the process (sqlservr.exe) that I need to connect to?

  Obviously. Have you tried?

• C# examples fail with "Failed to recognize the type of server or the version when connecting to the host"

  I am currently submitting work for P2V conversion from a c# application. I tried to run the application remotely and on-site, but I get this error message (here is the full error):

  "< detail > < InvalidArgumentFault xmlns =" urn: Converter ' xsi: type = "vim25:InvalidArgument" xmlns:vim25 = "urn: vim25" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" > < vim25:faultCause > < vim25:fault xsi: type = "ConverterNotSupportedConnection" > < hostName > RSMITH < / hostName > < / vim25:fault > < vim25:localizedMessage > impossible to recognize the type of server or the version when connecting to the host "RSMITH". " < / vim25: localizedMessage > < / vim25:faultCause > < / InvalidArgumentFault > < / details >

  RSMITH is the name of the machine with the VCenter Converter Standalone (5.0) and where I wan the VM to go. It's a Windows 7 SP1. I'm under .net 4.0 winform.

  Any suggestions? I'm pretty much run the sample out of the box, except for wrapping a winform around it instead of an application console.

  Cannot you telnet from your Converter machine on the source IDE oucederomsurlesecondport 9089 machine?

• PXI: no device (MAX), fail to connect or deploy

  Hello

  I tried to use an SMU-8135 and MAX status is "connected - Running ', but once I try to connect or to deploy from the project it opens a box dialog saying"fail to connect to the target. Also, I don't see no modules currently in PXI on MAX under devices and Interfaces.

  Note: I use LabVIEW Professional 14.

  Thanks for the help!

  I just wanted to update this discussion because I finally solved my problem and it can help people in the future.

  Here's what I did to make it work:

  (1) traded on the SMU ethernet cables

  (2) checked with the cmd I could ping the target

  using MAX:

  (3) uninstalled all the software that was already on the SMU (because I had some questions of dependencies)

  (4) reinstalled the LabVIEW RT module on the system (ensuring that download the PXI components)

  (5) installed the necessary components on the SMU (check that the two LabVIEW RT on the target and the host have the same version)

  After all these, I added the target of a project and could connect without problem.

  I hope that helps!