Failed to get old data from vista HD win 7

Similar Questions

• How can I get the keys to recharge my upgrade from Vista to Win 7 HOME, then to Win 7 Pro?

  I upgraded my laptop Dell from Vista to Win 7 Home using WUA, and then to Win 7 Pro.  The laptop is in the shop, after an automated Win update it would not turn stay in "Repair" mode  I took it for repair and the technician asked for the keys of the upgrade.  The information that I have are on the laptop broke.  I can't connect to my account.

  Can anyone help?

  Thank you

  Hi Clancy,

  You can get in touch with Microsoft Customer Service team to receive a product key. You may also provide information about your computer or product purchasing information when you talk to the customer service representative.

  For more information, you can consult the following articles:

  Contact Microsoft

  How to identify, locate, and replace a product key

  Get a new Windows product key

  Hope this information is useful.

• upgraded from VISTA to WIN 8/8.1 and I get hardware failure NMI shocks every day

  upgraded from VISTA to WIN 8/8.1 and I get hardware failure NMI shocks every day:

  problem started when I upgraded to WIN 8.  I get the dmp file but I don't know what to look for.

  I tried an error: see attachment

  I use a DELL optiplex.

  John

  Hi John,.

  Thank you for your response.

  This issue may occur if a computer hardware component is damaged, malfunctioning, or if an incompatible driver is installed on the computer.

  I suggest you follow the methods and check them off below if it helps:

  Method 1: I would say that you want to run cleanup start and check if it helps.

  https://support.Microsoft.com/en-us/KB/929135?WA=wsignin1.0

  Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of Kb to start the computer in normal startup after's article have solved the problem.

  Method 2: I suggest you install the latest video drivers on the manufacturer's Web site as below.

  http://www.Dell.com/support/home/us/en/19/products/?app=drivers

  F or make reference to follow the article below you.

  http://Windows.Microsoft.com/en-us/Windows/install-upgrade-activate-help#install-upgrade-activate-help=Windows-8&V1H=winrttab1&V2H=win8tab1&V3H=win7tab1&v4h=winvistatab1

  Hope this information is helpful and let me know if you need additional assistance.

  Thank you.

• Is it possible to see/get the data from the table to a dump file

  I have files dmp generated using expdp on oracle 11 g...

  expdp_schemas_18MAY2013_1.dmp

  expdp_schemas_18MAY2013_2.dmp

  expdp_schemas_18MAY2013_3.dmp

  Can I use a settings file given below to get the data from the table in the file sql or impdp the only option to load the data of table in database.

  VI test1.par

  USERID = "/ as sysdba".

  DIRECTORY = DATA

  dumpfile=expdp_schemas_18MAY2013%S.dmp

  SCHEMAS = USER1, USER2

  LOGFILE = user_dump_data.log

  SQLFILE = user_dump_data. SQL

  and impdp parfile = test1.par.

  No,

  DataPump cannot retrieve a dumpfile data in a flat file.

  Dean

• Get the data from a virtual computer store

  I'm looking to get the data from a virtual computer store, but format to be used with vmrun.  My current vmrun statement is:

  vmrun t CR h < IPAddress > https://: 443/SDK u & lt; username & gt; Pei & lt; password & gt; runProgramInGuest "[& lt;. datastorename & gt;] & lt; datastorefolder & gt; / & lt; virtualmachinename & gt;. VMX' c:\myscript.bat

  The idea is to replace & lt; datastorename & gt; given with the name of the LUN that is running on a virtual machine.  In this case, I'm running my statement vmrun from inside a script PowerCLI.  I can use a variables powerCLI, if the vmrun instruction can take and use all escape sequences are needed to adapt the format vmrun to this argument.

  That is right.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Errors running SQLIOSim - Simulator/o SQL - error: 0x8007045D error text: the request could not be performed because of an i/o device error. Description: failed to get the info from cache drive to C:\

  When we execute SQLIOSim on a Server Windows 2003 VM hosted on an ESX 3.01 or 3.5 server, you get the following messages:

  Error: 0x8007045D

  Text of the error: the request could not be performed because of an i/o device error.

  Description: Failed to get the info from cache drive to C:\

  Anyone know what is the cause or how to solve the problem (if it is a question)?

  Thank you

  Had the same error and found this blog:

  http://blogs.msdn.com/psssql/archive/2008/01/14/SQLIOSim-error-request-could-not-be-performed-unable-to-get-disk-cache-info.aspx

  It will be useful.

• Upgrades from vista to win 7transfer Windows Mail as well

  Original title;

  upgrade from vista to win 7

  I have win vista, win the transfer of mail if I update for win 7

  Sorry, but Windows Mail is not included in Windows 7. Your mail will not transfer, you will need to find an another e-mail client.

  Read this post: http://www.vistax64.com/vista-mail/256636-upgrading-vista-windows-7-using-windows-mail.html

  J W Stuart: http://www.pagestart.com

• How to erase old data Window Vista PC?

  I have a personal desktop computer and you want to format the hard drive, but fail.  I use Vista.  Right-click of the mouse to format drive C alow.  I have the Vista of entry and try to re - install the Vista, it finally road at the request of message buy Windows 7.  Because I want to throw the computer and donate to other people because I already have a new. So I have, then how format or erase all data from the old computer to office?

  Hello

  Can't delete/format Windows itself.

  @@@@@@@@@@@@@@@@@@@@@@@@

  To reinstall Vista and remove the existing partition from Vista with all your data during this process:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  @@@@@@@@@@@@@@@@@@@@@@@@

  Or use Dban that erases everything what he finds, including any operating system on the hard drive.

  http://www.DBAN.org/

  See you soon.

• How to add new data and delete old data from a custom text file?

  Hi guys!

  Well, I'm in a bit of trouble.

  I need to make a request to some GPS tools. Split data in indicators, generate coordinates (google maps format), and so it goes.

  One of the functions of the systems is the calculation of oscillation of coordinates. The formula should be: latitude 1 - latitude 2 = latitude AND longitude 1 - 2 = swing longitude longitude oscillation.

  Since I'm on two values, I thought: "Oh, if I connect these data in a file, I just pick up and do all the calculations part." Yes, this idea is adapted to my needs (even if it is not the best, the computer part solved my problem).

  BUT I don't see a way to write the current value of the loop and erase the old results.

  For example, suppose that loop 1 gave me 1.00000, 2,00000 coordinates and loop 2 gave me the coordinates 3.00000 and 4.00000. Right?

  My log file is similar to: 1.00000,2.00000; 3.00000,4.00000;

  Well, it works. However, we will look forward to loop 3: coordinates 5.00000,6.00000.

  If the program connects to it, I would get the chain: 1.00000,2.00000; 5.00000,6.00000; When I really need 3.00000,4.00000; 5.00000,6.00000;.

  For this reason, when I apply the calculation of oscillation, it will always take the most recent value and do all the calculations with the first result (from loop 1).

  Well, I wonder that there is a way to add new data to a file and replace the old values, with simple code. If anyone knows how, please respond here!

  Considerations:

  (1) I want to do it as simple as possible. My code is kind of great, and it is not appropriate to insert structures or library now.

  (2) maybe the explanation is not as simple as it is for me. Really, I couldn't find a better way to say what I need.

  (3) if someone has doubts as to my doubts, please just comment and I'll try to be as specific as possible.

  Thanks in advance!

  I guess my question is why write a file just to delete.

  If you pass an array of points from one iteration to another, you will have to take extra time to open the file, read the file, delete the old data, writing the new data, save the file, and then close the file.  It would be pretty much the same thing, but without having to go through the hard drive.

  Just a thought.

• How to get the data from more than 100 domains in bulk API V2.0?

  Hi all

  I try to get data from Eloqua by APIs in bulk because of big data.

  But my Contact 186 fields (more than the majority of export limitation 100). I think I need to get all the data by 2 exports.

  How could I corresponds to 2 parts of a line and join together?

  I'm afraid that any change of data between 2 relative to exports 2 synchronizations would make different order.

  FOR EXAMPLE:

  1. any document is deleted or modified (if it matches do not filter) after obtaining data of the first part and before getting the second part, then everyone behind it would have back in part result.

  2. the data in some fields (included in both parts) are changed between the 2 synchronizations, then the values of the second part are more recent but the values of the first part are old.

  All suggestions should.

  Thank you

  Biao

  bhuang -

  I don't know that you ever go to work around the fact that things will change in your database while you are synchronizing the data. You have to have a way to create exceptions on the side of the synchronization.

  If I pushed Eloqua data to a different database and had to contend with the problem of matches change while I'm syncing, I would create a few additional columns in my database to track the status of synchronization for this folder. Or create another small table to track the data map. Here's how I'd do.

  1. I would have two additional columns: 'mapped fields 1' and '2 fields' mapped. They would be all two datetime fields.
  2. I would do only one set of synchronization both. First of all, synchronize all records for email + 99 fields. Do the entire list. For each batch, the datetime value of the lot in 'mapped fields 1' column.
  3. I would then synchronize all folders of email + other 86 fields. Repeat the entire list. For this batch of the datetime value of each batch in their 'mapped the 2 fields' column to now().
  4. For all records that had only 'mapped fields filled, 1' but' fields mapped 2' was empty, I would be re - run the second query Eloqua API using e-mail as the search value. If no results were returned, I would remove the line. Otherwise, update and the value 'mapped fields in 2' now
  5. For all the records that were only "fields mapped 2', I re - run against the first email query API Eloqua, fill in the missing data and define 'mapped the fields of 1' of the current datetime object." If the record has not returned, remove the line because it is probably not in the search longer.
  6. Finally, the value 'mapped fields 1' and 'mapped 2 fields' empty for all records, since you know that data is synchronized. This will allow you to use the same logic above on your next synchronization.

  Who is? It is not super clean, but it will do the job, unless your synchronizations take a ridiculous amount of time and your great data changes often.

• move old data from the mysql table

  I have a Web page that retrieves the content in a database. The table are filled via a restricted page that was created for the data entry. I just want to know is anyway we can push the old data to another table after so long. For example if the data was created in table1 for seven days, the eighth day, I like the data that have been put on the day 1 to table2 kind that table1 will have room for the data that will be created to update 8. I would like to only 7 days worth of data in table1. Also how to remove completely from table2 data after 90 days. Also, what must you do to have the last entry in the table of row1.of

  Thank you

  keramatali wrote:

  what I need to do to display the data of the day 2 to day 7 instead of shoiwng given from day 1 to day 7

  It's a simple matter of logic. Get the last seven days is to retrieve dates that have overtaken less seven. To get days 2 to 7, you need to dates that are less than or equal to today less than 1 AND greater than or equal to 7 today.

  SELECT column1, column2, column3FROM myTableWHERE date_created <= SUBDATE(NOW(), 1) AND date_created >= SUBDATE(NOW(), 7)ORDER BY date_created DESC
  

• Whenever I call a VI I get old data with new data in the table

  I selected 'clear indicators when it is called' in my properties VI, execution. Yet, whenever I call the VI, the table of data is growing. My main VI implements my USE, and then call the sub - VI, which sets up an instrument measurements, then reads the results and transmits data. I then change the UUT to the next State and repeat the same task sub - VI to get again the same measures. The main VI changes the mode of WEAR it three times, so call the sub - VI three times. The last call of the Subvi back all three sets of data together, which is OK. My problem is, when the main VI ends and I run another USE, I get the new set of data as well as the complete list of data from the previous run. I found a similar problem answered here on the forum who suggested I should 'clear indicators when it is called', and so I did. It still has not fixed my problem. Any idea?

  Try this, for example:

  

• Get the data from the current quarter

  Hello

  I was wondering how I would go about getting data from a table that is in the current fiscal quarter?

  It's the simple query to get all the data:

  $q_calls_sql = "SELECT * FROM renewal_contact WHERE userid ='". "." ' $user_id. "'";

  $q_calls_query = $con-> query ($q_calls_sql);

  $q_calls_numrow = $q_calls_query-> num_rows;

  Here's what I currently show the quarterly data, but only shows do not all data:

  $q_calls_sql = "SELECT."

  OF renewal_contact

  WHERE the timestamp > = GETDATE(), DATEADD (qq, 1, getdate ()) & & timestamp < GETDATE(), DATEADD (qq, 2, getdate ()) ';

  $q_calls_query = $con-> query ($q_calls_sql);

  $q_calls_numrow = $q_calls_query-> num_rows;

  All I have to do is show the num_rows of the above query.

  MySQL QUARTER() function deals with calendar quarters rather than the fiscal quarters. In the United States, first by the federal Government's fiscal quarter begins October 1, dealing with MySQL as in the fourth quarter. The first fiscal quarter in California begins on 1 July, that MySQL considers (rightly) as of the third quarter.

  A way to get the quarter is to use a custom like this function:

  function getFiscalQuarter() {
    $month = date('n');
    $year = date('Y');
    switch ($month) {
        case 1:
        case 2:
        case 3:
            return ["$year-01-01", "$year-03-31"];
        case 4:
        case 5:
        case 6:
            return ["$year-04-01", "$year-06-30"];
        case 7:
        case 8:
        case 9:
            return ["$year-07-01", "$year-09-30"];
        default:
            return ["$year-10-01", "$year-12-31"];
    }
  }
  
  $quarter = getFiscalQuarter();
  
  $sql = 'SELECT * FROM renewal_contact
          WHERE `timestamp` BETWEEN "' . $quarter[0] . '" AND "' . $quarter[1] . '"';
  

• How to insert into a GLOBAL TEMPORARY TABLE and get the data from it?

  The requrement is
  Split the string ENTRY point on the base and store it in a Collection. And the values of the collection will be stored in a global temporary table. Then, I'm updating some other table based on the data from the temporary table.
  
  There is in fact no error message. But there is no data in the temporary table and also no change in the update statement
  
  First of all, I'm creatiing a global temporary table only once outside the procedure.
  
  CREATE GLOBAL TEMPORARY table GLt (data_element number)
  
  
  create or replace procedure test_proc (p_in_string VARCHAR2) is
  i the number: = 0;
  number of POS: = 0;
  CLOB lv_str: = p_in_string;
  p_delim VARCHAR2 (1): = ', ';
  
  TYPE t_array IS TABLE OF VARCHAR2 (20) INDEX directory.
  t_array channels;
  
  BEGIN
  
  -cutting of string input and store in the strings (i) collection
  
  POS: = instr (lv_str, p_delim, 1, 1);
  WHILE (pos! = 0) LOOP
  i: = i + 1;
  Strings (i): = substr(lv_str,1,pos-1);
  lv_str: = substr (lv_str, pos + 1, length (lv_str));
  POS: = instr (lv_str, p_delim, 1, 1);
  IF pos = 0 THEN
  Strings (i + 1): = lv_str;
  END IF;
  END LOOP;
  
  run immediately "drop table TWG;
  run immediately ' CREATE GLOBAL TEMPORARY table (data_element number) TWG on commit preserve rows ";
  
  FORALL i in strings.first... Strings.Last
  INSERT INTO VALUES TWG (strings (i));
  commit;
  
  Update first_tbl set PIN is "XXX" where first_col in (select data_element from TWG);.
  commit;
  
  END test_proc;
  
  Published by: cedric b on January 25, 2013 12:59

  Remove the two execute immediate line. They are wrong.

  And then use the table in your code that you created at the beginning. The name is GLT.
  And delete the first commit. This validation would empty the temporary table of GLT.

  You get an error? Or it does not work as expected?

  Also, show how you call the procedure.

  Published by: Sven w. January 25, 2013 14:45

• Query to get the date from

  Hello everyone,
  
  How can I create a query having 2 date and 2 variable of the type:
  

  from 1 date 05/06/2004 
  to   2 date 15/06/2004 
  yes for 2 days
  no for  1 day
  that is, 
  
  i wish get the date with yes for 2 days and not for 1 day, this is, that I want
  
  05/06/2004 sabato
  06/06/2004 domenica
  08/06/2004 martedì
  09/06/2004 mercoledi
  11/06/2004 venerdi
  12/06/2004 sabato  
  14/06/2004 lunedi
  15/06/2004 martedi

  Thanks in advance

  Hello

  The WHERE clause controls the lines will appear.
  If your needs change, change the WHERE clause to reflect their.

  For example:

  DEFINE     from_date     = "TO_DATE ('05/06/2004', 'DD/MM/YYYY')"
  DEFINE     to_date          = "TO_DATE ('15/06/2004', 'DD/MM/YYYY')"
  DEFINE     yes_cnt          = 3
  DEFINE     no_cnt          = 2
  
  SELECT  &from_date + LEVEL - 1        AS dt
  FROM     dual
  WHERE     MOD ( LEVEL
           , &yes_cnt + &no_cnt
           )          BETWEEN  1
                     AND      &yes_cnt
  CONNECT BY  LEVEL <= 1 + &to_date
                       - &from_date
  ORDER BY  dt;
  

  This will work as long as you want the first & yes_cnt lines to display (assuming that there are many) and the following lines & no_cnt don't step to display, and then another & yes_cnt lines to display and the other & no_cnt lines not to display and so on.

  I guess & yes_cnt is a positive integer and that & no_cnt is a non-negative integer. (I.e. & no_cnt can be 0)