ReadyNAS 102 e-mail notifications

Similar Questions

• How do I just get messages from the Inbox to show the new mail notification?

  I install Thunderbird with Gmail and it works like a charm. The only complaint I have is that the new mail notification seems to grasp a selection of emails unread from different folders and often it does not show the new relevant emails in my Inbox. ESP. the all mail folder seems to provoke the doubling of message notifications, but this isn't the only one.

  All I want is my Inbox for new e-mail notifications. Is there anyway to change the current behavior?

  And there is no solution to limit the mail in a particular folder Inbox or other, so I suggest ur stuck.

  This add-on could help https://addons.mozilla.org/en-US/thunderbird/addon/xnotifier/?src=search , but I have really no idea.

• When I get the message/e-mail notification, my camera flashes

  When I get the message/e-mail notification, my camera flashes

  Hello

  Follow the instructions to turn off the alerts of Flash LED here > http://www.imore.com/how-to-turn-on-led-notification-light-iphone

  Or tap Settings > general > accessibility > Flash LED for alerts.

• Mail notification on phone family member

  I have family and a member receives my email notifications and can actually access only if they slip. However, they have no access to my email otherwise. How can I stop this from happening?

  The family has nothing to do with email.   E-mail account which you are referring?   The only way to e-mail notifications occur is if this account is installed on this phone

• ReadyNAS 102 and 5 BT business hub

  Hello world

  I moved to BT Business Monday. I have connected my ReadyNAS 102 and I can access it ok on my mac via the finder and Explorer on my Windows PC 10.

  The problem I have is when I have access to the net via readycloud.neatgear.com. The unit will display offline.

  I have disabled the firewall on the BT Business Hub 5, but he was showing always offline.

  I can log in as admin ok when I connect via IP address directly.

  Can someone tell me what I need to do?

  Thanks in advance.

  He fixed everyone - the readynas has the old IP configured DNS.

• Sonos and ReadyNAS 102 v6.4.1 compatibility

  I use a ReadyNas 102 to serve files from music for a Sonos system.

  Everything worked perfectly under firmware 6.4.0, but after upgrading to Sonos 6.4.1, is no longer able to index or see about two-thirds of the content (files flac and mp3).

  Decommissioning of 6.4.0 snaps back and Sonos works as expected and is able to index my entire collection.

  the upgrade of ReadyNas is the only thing that's changed.

  Any ideas what's happening?

  righteye wrote:

  I use a ReadyNas 102 to serve files from music for a Sonos system.

  Everything worked perfectly under firmware 6.4.0, but after upgrading to Sonos 6.4.1, is no longer able to index or see about two-thirds of the content (files flac and mp3).

  Decommissioning of 6.4.0 snaps back and Sonos works as expected and is able to index my entire collection.

  the upgrade of ReadyNas is the only thing that's changed.

  Any ideas what's happening?

  I use my RN 204 to broadcast my Sonos system files and it still works after that I updated to 6.4.1.

  You have active Antivirus?

• E-mail notification of silence Droid4

  How to transform the sound e-mail notification?

  I actually think that the sounds of notifications for Gmail are hidden in a ridiculous way.

  Open Gmail > Menu > more > settings > [If you have multiple Gmail accounts, choose a] > labels to notify > Inbox > ringtone.

  Not only is this really buried but -"tags to notify! Who thought this would be an excellent checklist?

  (Sorry. Stuff like that makes me crazy...)

• ReadyNAS-102 (6.4.1) disconnects randomly

  Hi all

  Over a year ago I bought a NAS readyNAS-102 as replacement for my old configuration by using a media player with external drives. From the beginning I was very happy with the way everything worked, it was so good!

  I was able to access my files across using FTP, I could listen to my Samsung Smart TV and all devices (laptops, ipads, you call it) could access the database, I created.

  This has stopped recently. For some unknown reason my readyNAS-102 with firmware 6.4.1 randomly disconnects after a while to load. It doesn't matter if it is used TV, laptop or tablet.

  For example, when you watch a movie on the TV, the laptop or Tablet the device disconnects from the SIN after a random delay. This may be 3 or 30 minutes in the film. Strange thing is, it is not peripheral wide, so when the laptop is disconnected (I can't access it storage network or via static ip address) I can still access the NAS with my ipad.

  The same thing happens when you look at photos etc. I already tried several things but can't seem to find the missing piece of the puzzle.

  Perhaps people with more knowledge have a hunch where the problem may be.

  Kind regards

  Tomas

  I am pleased to announce that for the moment, the problem disappeared.

  I updated the firmware to the latest version beta 6.4.2 - T72 and tested by watching a movie.

  For 1 hour and 15 minutes the NAS has run smoothly so I am happy again.

  Thanks for the quick and clear answer y ' All!

• How to enable curl on readynas 102

  How to activate curl on my readynas 102. I find no answer anywhere.

  I tried to install curl via winscp through the command apt but failed. Please help me with this

  Ah. What of it? :

  # apt - get install php5-curl

  You can try adding

  extension = curl.so

  in your php.ini file.

• E-mail notifications

  Our company uses UTM25 and strive configure the system to use mail notifications settings. I read in several other threads, it requires the use of the SMTP port 25, which does not seem to be supported by a large number of major email service providers (gmail, hotmail, etc.).

  What I have to put in place a special Exchange Server just to send an e-mail from this router? Why can I not use other ports? The admin for our society, it is important that every day I receive alerts of the UTM without having to log on and run them manually.

  BTW: I use an outdated firmware version, but as far as I can see the update notes, new versions of firmware have nothing to do with the SMTP port used for the email notification.

  Thanks in advance!

  dwhittington wrote:

  Our company uses UTM25 and strive configure the system to use mail notifications settings. I read in several other threads, it requires the use of the SMTP port 25, which does not seem to be supported by a large number of major email service providers (gmail, hotmail, etc.). What I have to put in place a special Exchange Server just to send an e-mail from this router? Why can I not use other ports? The admin for our society, it is important that every day I receive alerts of the UTM without having to log on and run them manually. BTW: I use an outdated firmware version, but as far as I can see the update notes, new versions of firmware have nothing to do with the SMTP port used for the email notification. Thanks in advance!

  Try upgrading to 1.3.7 - 0 and then do an update to 1.3.14-0. offline
  You should be able to specify the port now.

• ReadyNAS 102: Problems with 3TO discs?

  Hi all

  I have a ReadyNAS 102 with two WD 1 TB drives, but I'm getting closer to full and upgrade to hard drives of 3 TB. I see a lot of discussions here on the 102 and 2 discs to 3 TB. Is there a problem with discs on the 102 3TO?

  Thank you

  Reference Dell

  3 TB works very well, I had a WD30EFRX in the mine for awhile (2 1/2 years for the first hard disk).

  I recommend readers NAS proposed (in the case of WD, which would be RED or RED Pro).

• Cannot install Firmware on ReadyNAS 102 v6.2.5

  Hello world

  I tried to install the new OS version 6.2.5 on my ReadyNAS 102 but each time it restarts, it always goes back to 6.2.4. I tried to do the manual install, as before, but nothing helped. Does anyone have a solution to this?

  Thank you

  I had been looking for ways to install v6.4 now and earlier I came across this thread: https://community.netgear.com/t5/New-to-ReadyNAS/Unable-to-Uograde-to-NASOS-6-4-0/td-p/993406 which led me to this FAQ about v6.4: http://kb.netgear.com/app/answers/detail/a_id/29961 which then leads to this workaround: http://kb.netgear.com/app/answers/detail/a_id/29961

  The workaround solution "works".

• ReadyNAS 102 no access to the files either

  Hi, I need help!
  Let me try to describe the events that led to this.

  1. I discovered yesterday that the ftp did not work on my readynas 102 suddenly

  2. I went into the admin page and tried to turn off and restart the ftp service. (he has not solved)

  3. I accidentally disabled the http service to uncheck "Admin HTTP"

  4. all access to my nas was suddenly unavailable. ? Shared folders no longer appear in my network. -I got tvmobili installed all this while and strangely tvmobili can still access my files via dlna on my TV.

  5. I tried os reinstall, but in vain.

  6 willing Raidar to a management service is offline error and I am also unable to download all the newspapers. (Failed)

  No browse button, Admin leads to a page that will never load.

  7 diagnosis indicates Disk 1 has 2 timeouts of command

  8. I tried to take the drive out and put it in an external hard drive enclosure. OS x is unable to read the disc. I tried it on debian via parallels and it has a hard drive tb 5 complete with unknown partition (PMBR) and impossible to climb. (How can it be empty if I can still access my files through dlna via tvmobili?) What format is the hard drive in and how can I get on osx or any os?

  9. If I boot the nas as usual, the power button keeps blinking.

  I am currently using Mac in my household. I owe too much in the hard drive just do a factory reset. any ideas anyone? I'd really like to get the files inside!

  Thanks for any help!

  
  

• ReadyNAS 102 - cannot install applications (all)

  The evening

  I bought a ReadyNAS 102 in January, after an initial installation, I installed OwnCloud and decided that I didn't want so I uninstalled. This had the unusual side effect of uninstalling the main web server for the device, after having met the support team, I took the action at the factory reset my device, which has restored the main web server

  Since then I was able to install all the applications. Whenever I try to do, I get the error "unable to install ."

  I've recently updated to 6.2.2-> 6.2.4 firmware and I'm still having the same issues. Although now I also have the message "Apps operation failed: list of applications can be missing or out of date." You want to update the list now? ' - choose 'Yes' to this fact appear a message "update list" box

  I then get a response "list of the application updated successfully. You can now install applications", however, any application I try to install still does not work and the guest above is provided again.

  I would be grateful any advice anyone can offer to fix this issues.

  Thank you

  Chris.

  It turns out that the DNS has been set incorrectly and the NAS could not connect to the internet. Refreshing DNS on the Server NAS has solved the problem.

• ReadyNAS 102

  Hello

  After several years of working perfectly, my ReadyNAS 102 has the following problem:

  • I can't access the Administration Web page, it says only: he is in charge and eventually times out.
    Although it either in this state that RAIDAR said the device starts up - but it never happened that. The power light blinks slowly
  • When I boot it in mode read-only, there is no problem, and both drives are reported in good health.
  • Whe in read-only mode, I can copy data off the coast on a USB drive or eSATA. I can also SSH to the machine
  • I noticed in the newspapers that he has recently upgraded to 6.4.2.
  • I saw a few posts about disabling the add-on - the only one I have is "Supersync" and it is not executed. The instructions in the messages do not seem to apply it is to say

  I initially thought one of the drives died - but it seems that there is a problem with the operating system.

  If anyone can help solve me this I woud be very grateful

  Andrew

  Your data volume becomes quite full and there is a lot of fragmentation.

  We recommend that you keep the volume of use at least 80%. If you want to go a little higher that regular maintenance of regular volume is important.

  The disk with ATA errors looks like it is a failure.

  It would be advisable to back up your data, perform a factory reset, be more selective about which actions to use bit - rot protection and instant and restore your backup data.