Failed to install RAC where format ocrdisk on RHEL 5.3
Hello guys,.I want to install a RAC 10 g on redhat enterprise linux 5.3, but I face a problem:
After Installation the Clusterware, I need to run: $ORA_CRS_HOME/root.sh
But there is a problem as below:
clsfmt: unexpected i/o error queues
skgfqio: additional information: 1
Additional information: 4
The environment is:
[root@test1 ~] # uname - r
2.6.18 - 128.EL5
[root@test1 ~] # / etc/redhat - release more
Release of Red Hat Enterprise Linux Server 5.3 (Tikanga)
and the gpfs 3.3.0.5 be install in my platform.
The ocrdisk was made on the disks, GPFS.
Thank you.
Hello
don't you misunterstood something:
You can install RAC on RHEL 5 for x 86 with no problems.
-With or without GPFS (although I recommend to use ASM instead of GPFS).
-You must place OCR and discs with right to vote directly on the block/RAW devices.
Better is probably to take clusterware 11.2, here you can use ASM for everything and could also use ACFS as a clusterfilesystem for the database files.
Although you can use OCFS2, I recommend placing OCR and discs, directly on the block or raw devices to vote. See the installation guide for more details.
You can also install RAC on AIX.
-also here, it is recommended to place the OCR and the discs out of GPFS to vote.
And you can install it on Linux on Power, but only 10.2, since there is no 11 for linux to power software.
Concerning
Sebastian
Tags: Database
Similar Questions
-
Just bought Photoshop elements 13. Failed to install. ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.Where is the 64-bit version?
PES 10, 11, 12, 13 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
PSE 13 trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements
(Info for PC vs Mac: https://forums.adobe.com/thread/1658959?sr=inbox&ru=3738552)
-
Failed to install Microsoft Flight Simulator. Will not pass the installation wizard.
Failed to install Microsoft Flight Simulator, Version Deluxe 2010. I am running Windows 7 Ult 64 bit. The program will not install, it's an error that it cannot find the file. I tried everything, but it does not install. This is the full version of three discs.
Following up on this question. I have install and it will go through the wizard of the insulation. Then, it will come with a large screen. He stays there and then says after 15 minutes. «Unable to launch vcredist_ * 86.exe.» I press ok and a error number "the system cannot find the path specified in 3. Press ok and then it states that the system has not changed except for... »
I am convinced that Flight simulator is not intended to be run on a 64-bit computer that is very disappointing. I have a program which should install without all the aggravation I had to endure. If you run them 64-bit machines do not buy this product. I tried since it first came out. I feel at the moment where I get it going it will be a version dated date out. Wait until there is a version dedicated 64-bit, you will save yourself a lot of grief. I have an Asus dual core Centrino 2, 2.6 GB h. computer laptop with 4 GB memory. I install my DVD direct program. It worked when the computer is a 32-bit computer.
Clive Ballantyne
What finally worked for me when I tried to install MSFSX Gold Edition has been that I copied the disc 1 FS to my office. Then I copied the contents of the FS 2 disc and put the files in the same folder. When're asked you if you want to replace the files with the same name on both drives say no. It seemed to work well for me when nothing else did.
I haven't read of anyone doing this exactly, it's my own invention/workaround bit AFAIK. Hope this works for all of you who cannot make it work otherwise.
System:
ASUS G50v-t
Intel Core 2 Duo Centrino 2, 2.26 GHz
NVIDIA GeForce 9800 m GS 512 MB
4 GB of Ram
Windows 7 Professional 64 bit -
need help for the automatic update of work again.has has not worked since October 16. gives error 643 and said 646.IRV 6 updates waiting to be loaded, but when I install and it does its thing, sometimes failed to install updates and gives these errors.clicked on the start menu where it says shuts down your computer and install updates but auto update still does not work
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
KB2483185 fails to install even after difficulty there 50593
I am unable to apply the update to Microsoft KB2483185 February. I think it started because of a failure of file download, but that has been corrected and now is stuck because MS of a workaround does not work.
As stated on the KB article http://support.microsoft.com/kb/2483185, I ran Microsoft Fix it 50593 (and in fact have managed to activate and deactivate in trouble several times during troubleshooting) and I tried the update again with no joy.
I contacted the support of MS, and they walked me all first through a process of liberation of the previous downloads, and then trying to apply the fix in Mode safe without using MS Update, installing got message error "Setup cannot copy the file shimgvw.dll.
MS continues to insist the that put up-to-date may be broken, despite the fact that I run and successfully installed several other fixes of update since I first tried KB2483185.
I think the parameters of access control for C:\WINDOWS\system32\shimgvw.dll are confused. I should also mention that Windows Picture and Fax Viewer no longer appears in my context menu (instead it lists 'shimgvw' but choose just gets an error message.
The original for KB2483185 web page gave an alternative manual to fix my web searches have found several different suggestions for the parameters to use with the 'Cacls.exe' command to set the access control for shimgvw and he 50593, but this info is no longer available.
Anyone know where I can find the official news of MS on the manual alternative to fix 50593?
Or does anyone have any general suggestions for my problem or specific settings to use for Cacls.exe to ensure shimgvw.dll has appropriate access control settings?
Difficulty running it 50590 would have allowed to this workaround. Difficulty running it 50593 (which you already did) would have disabled (or "cancelled") workaround.
If you would run difficulty he 50590 but have not run difficulty he 50593, KB2483185 fails to install & explain your situation:
Note that before installing the MS11-006 security update, you must cancel this work systems where you previously applied around it.
Source: the section you referenced in http://www.microsoft.com/technet/security/bulletin/MS11-006.mspxSo no, something (for example, W32/Alureon-Variant or another infection) is originally failed to KB2483185. And Yes, I want to contact you the MS Support again once (be sure to quote your case of origin or SRX): this time, you will need to firmly insist on talking with technology to 'level 2 '.
Also to give tech a link to this thread for reference.
Note: All the foregoing assumes that you have a functional application of the antivirus installed AND that there is no "leftovers" from a previous installs a Norton or McAfee application.
-
I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
For about 4 days, it says install important updates, I try and it manages not to install message says to try again, and he still fails to install important updates. When I turned off my computer, the message says installation step 1... 2... 3..., but still, it will fail to install. I never had a problem with it before. Last week, I started having this problem. It will not install updates importamnt. Please help, I need to install my updates. Thanks in advance.
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Cannot use Windows Update - KB982132 and KB972270 fail to install, error 0x800A0007
I can't using Windows Update for two 'critical updates of security". I got anumber of error messages, but the last was 0x800A0007. This is nowhere on their support pages. Can someone suggest a possible solution? (If I can solve this problem, I can get IE9 fixing.) With the help of Windows XP Edition family
The two KB982132 and KB972270 updates failed to install (twice) with error message that appears now is no longer on the 0x8007001F support page.
Since that time when I get to "check your computer for Updates" page fails to display and code error 0x800A0007, which also appears nowhere.
Norton Internet Security Firewall is disabled and the Windows Firewall is enabled.
Thank you-
Do not uninstall IE8 or IE7 before doing a repair installation leaves the two Internet Explorer and Windows in a "confused" or "broken" State - so your Windows Update (if any) problems.
I'm sorry to tell you that your only recourse now formats the hard drive & then by doing a new installation of Windows. [1]
Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636
If you need additional help with the clean install, please start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system
Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.
Wish I had better news for you. Good luck!
=======================================================
[1] PS: I learned that the hard way, too, many years ago! -
The updates that fail to install.
For several years now I have received a notice of updates and they have always failed to install. I gonored the problem since the computer was working ok (my use is very limited). Reading some of the information provided by you, dear friends, I decided to cry HELP.
For several years now I have received a notice of updates and they have always failed to install. I gonored the problem since the computer was working ok (my use is very limited). Reading some of the information provided by you, dear friends, I decided to cry HELP.
Do not jump. Even if you know that you did 30 seconds before you are about to do again because you are being asked to do things. In order... Wait as this to blow up your weekend.
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner.
The less you have to run all the time, most things you want to run will perform:
Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.
You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.
Do a house cleaning and the dust of this hard drive:
You can free up disk space (will also help get rid of the things that you do not use) through the following steps:
Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.
If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
http://www3.TELUS.NET/dandemar/spack.htm
(Especially of interest here - #4)
(Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning
How to use disk cleanup
http://support.Microsoft.com/kb/310312You can disable hibernation if it is enabled and you do not...
When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:
-Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
-Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
-Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.You can control the amount of space your system restore can use...
1. Click Start, right click my computer and then click Properties.
2. click on the System Restore tab.
3. highlight one of your readers (or C: If you only) and click on the button "settings".
4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
5. click on OK. Then click OK again.You can control the amount of space used may or may not temporary Internet files...
Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...
-Open a copy of Microsoft Internet Explorer.
-Select TOOLS - Internet Options.
-On the general tab in the section 'Temporary Internet files', follow these steps:
-Click on 'Delete the Cookies' (click OK)
-Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
-Click OK.
-Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
-Once it's done, click OK, close Internet Explorer, open Internet Explorer.You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:
CCleaner (free!)
http://www.CCleaner.com/
(just disk cleanup - do not play with the part of the registry for the moment)Other ways to free up space...
SequoiaView
http://www.win.Tue.nl/SequoiaView/JDiskReport
http://www.jgoodies.com/freeware/JDiskReport/index.htmlThose who can help you discover visually where all space is used. Then, you can determine what to do.
After that - you want to check any physical errors and fix everything for efficient access"
CHKDSK
How to scan your disks for errors* will take time and a reboot.Defragment
How to defragment your hard drives* will take timeCleaning the components of update on your Windows XP computer
While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.
Download and run the MSRT tool manually:
http://www.Microsoft.com/security/malwareremove/default.mspx
(Ignore the details and download the tool to download and save to your desktop, run it.)Reset.
Download/install the latest program Windows installation (for your operating system):
(Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
(Download and save it to your desktop, run it.)Reset.
and...
Download the latest version of Windows Update (x 86) agent here:
http://go.Microsoft.com/fwlink/?LinkId=91237
... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:Close all Internet Explorer Windows and other applications.
AutoScan--> RUN and type:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.(If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...
Reset.
Now reset your Windows with this FixIt components update (if given the choice, you * will * use the aggressive version):
How to reset the Windows Update components?Reset.
Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:
Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.
If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.
-
Original title: KB2619340 fails to install.
I installed the two recent Windows updates, the KB2619340 and the KB2596843 several times, but they do not have to install correctly. I am running WinXP SP3. Anyone know why?
Hello
You receive an error message? If so, then post back the exact error message.
Step 1: Run the following article fixit tool and check.
Diagnose and automatically fix common problems with Windows Update
http://support.Microsoft.com/mats/windows_update/
Step 2: Download updates from the Microsoft Download Center and install it.
http://www.Microsoft.com/download/en/details.aspx?ID=28469
http://www.Microsoft.com/download/en/details.aspx?ID=28530
For more information about updates:
MS11-092: Description of the update of security for Windows XP Edition Media Center 2005: 13 December 2011
http://support.Microsoft.com/kb/2619340MS11-094: Description of the update of security for the Microsoft Office for Word and Excel Compatibility Pack file PowerPoint 2007: 13 Formats December 2011
http://support.Microsoft.com/kb/2596843 -
I am running Windows Vista and Windows Update fails to install three updates... KB2686833, KB2699988 and KB2709162... the error code is 8E5E03FB which I can't find a solution for anywhere... Please help
Original title: anyone know where I can find a solution for error code 8E5E03FB
I looked in the help and the Microsoft Web site in the world. I tried to startup using MSconfig, activate and deactivate services, I tried the Microsoft Update Catalog. I started by not being able to install six updates and now got it to three and have grown tired of trying to figure it out by myself.
If you have tried everything, including a repair install as stated in this thread:
You've done everything mentioned in this article?
-
Windows updates downloading the critical updates and fails to install several times.
Original title : Updates the Windows Updates downloads, but will not install one of them. No error code, just fails to install one of them... many, many times.
It is a Dell Inspiron 1525 laptop. Windows updates downloading the critical updates, but will not install one of them. Running Vista Home Premium.
Hello
Step 1:
Try disabling the security software and then try to install the updates,
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Step 2:
In addition, perform a clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: After having apres avoir effectue done the steps of troubleshooting, follow step 7 to start the computer again normally.
Step 3:
Please try and run the steps listed from the link below,
The problems with the installation of the updates:
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
To find the error code,
a. Click Start, then in the type of research to start, Windows update and press ENTER.
b. click view update history.
c. double-click the update failed, where you can find the error code.
Reference:
What are the error codes and how can I use them?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-error-codes-and-how-can-I-use-them
-
Why the numbers KB3126593 & KB3126587repetitively updates fail to install?
Original title: Windows marchandises7 updates
Why our KB3126593 & KB3126587repetitively updates fail to install?
Ian
Please provide more information for your issue to be diagnosed.
Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.
Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.
Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.
To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.
For assistance OneDrive see paragraph 9.3:
http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm -
BlackBerry software failed to install BB link on 2012 R2 server
My iTunes works as a server on a server 2012R2 computer, I thought also to install BB link on this machine. But unfortunately it does not install correctly. Well, he moved up to the point where services must be started:
Trying to install version 1.2.3.56 of the BB link, an error message prompted [start Link Communication Manager (Service of Tunnel RIM) BlackBerry service failed. Make sure you have sufficient privileges to start system services.
Eeven if I am admin of this box, the installation program keeps saying it cannot start services and claiming the user has insufficient rights.
I have not tried the 2012 R2, but it could be similar to the solution that I found on 2008 R2.
http://anonit.blogspot.com.au/2014/07/BlackBerry-link-fails-to-install-error.html
-
KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV
KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.
Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:
-AMD/Radeon APU
-Windows 8 6.2.9200
-See sysinfo below for more details
The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update. With the exception of troubleshooting the failure of the update, none of the changes have been made. The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.
Additional troubleshooting measures to date include:
-Uninstall the software OEM AV (Norton), then by restarting.
-Temporarily disable all the features of Windows Defender.
-Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.
-Realization of an analysis of the SFC system (with no error found).
Results: The Windows Update full KB2887069 with a failed State and produced the following results.
2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
2014-11-15 19:25:08:807 3488 1 b 84 Manager:
2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
2014-11-15 19:25:08:807 3488 1 b 84 Manager:
2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
2014-11-15 19:25:13:378 3488 1 b 84 Manager:
2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
2014-11-15 19:25:13:378 3488 1 b 84 Manager:
2014-11-15 19:25:13:378 880 fa0 Agent *.
2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
2014-11-15 19:25:13:378 880 fa0 Agent *.
2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
2014-11-15 19:25:13:378 6676 1a0c COMAPI-
2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
2014-11-15 19:25:13:378 6676 1a0c COMAPI-
2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
2014-11-15 19:35:19:795 880 1-28 Service *.
2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
2014-11-15 19:35:19:795 880 1-28 Service *.I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...
ACTIONS
[You may want to print these instructions for reference offline. IMPORTANT => NO SKIP & perform all steps in one uninterrupted session! [If a step said to restart, restart! ]
1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.
4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]
4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).
Note-online scripts are good for IE9, IE10 & IE11, too,
5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.
5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.
6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737
Note => for best results, check the option Remove personal settings .
7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]
8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.
9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.
- Upgrade to Win8.1: FAQ
http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8 - The upgrade to Win8.1 tutorial
http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial - Upgrade to Win8.1: FAQ
- What's new in Win8.1?
http://Windows.Microsoft.com/en-us/Windows-8/whats-new
10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.
11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.
Good luck!
===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl
[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.
Maybe you are looking for
-
Battery not charging on my Satellite A350-220
Hey, I have a whole list of problems (some of which can be fixed) on my laptop which is 5 months old, but let's start with the most urgent issue. The battery charging all the time. Sometimes it is, sometimes it isn't, it's quite randomly... Sometimes
-
Hello I tried to find an answer to this, but so far have had no luck. I'm looking to build a vi where the user will be able to choose among two or three different menus, one after the other that will tell our machine there. I can use buttons for each
-
Computer Vista will not complete start up once the updates have been installed
Office worked well on 20 January, until the update when you restart it should start going to black screen with cursor. I tried to fix it, but it does not work. I tried the system restore to an earlier date but gives the error. Does anyone have ideas,
-
im getting this error eregent errror
Im having this error eregent when I re start the computer
-
BBM how to retrieve BBM be hacked or how to catch the pirate?
Hello everyone, I have a few requests here as member of my family comes from live be hacked:-can I know if we provide BBN, PIN, could we know email ID used to register?-How to retrieve the BBM be hacked?-How to catch the pirate?Thanks in advance!