Failed to read the scanned text

Similar Questions

• Media Player 11 - fails to read the MOD files

  Using Media Player 11 - had previously played MOD video files from a JVC Everio camera.  Recently, the MP is unable to play the video file.  Do not lock or freeze - just fails to read the file.  (Works with AVI or other files).

  Trying to install a pack of codec as the pack k - lite codec to fix: http://download.cnet.com/K-Lite-Mega-Codec-Pack/3000-13632_4-10794603.html

• Read the question text

  Hello, I've attached all the images needed and screw/chopsticks.

  Question: I'm checking my text of reading/writing (what is written errors in an XML format, but also a corresponding timestamp) right after that I wrote the error in the XML file.  The code does is to make sure that the error is not a mistake I am allowing, then goes to write the error in the XML.  There is a box structure which then manages a first time entry.  The idea is to review the data from the XML, then insert the new error in the table and then write back in the xml doc after flattening.  I understand the issues in the long term this 'solution '.  Now, please don't comment on it.  What bothers me, is that when I try to re - open and read the document, I can't seem to ever display element of the array, even if the read/write function (which is essentially the exact same thing) can do it very well.  I circled the items.  The code is in 2011.  Be sure to insert text in the name of the document.  Run it a couple of times and I think you'll see what I'm driving at.  Anyone have an explanation for it?

  

  

  Open your base to replace file read and ends with reading XML file and Write functions, and I think it will work in the desired manner.

  You must use XML reading and writing files functions to serialize the data in a way that LabVIEW can reconstruct the table clusters and timestamps.

  http://zone.NI.com/reference/en-XX/help/371361H-01/Glang/read_from_xml_file/

  

• Downloaded SP3 of XP on a USB to update XP computer without internet connection, computer, failed to read the iso file?

  I downloaded the SP3 of XP on a USB to update an XP computer that is not connected to the internet.  The computer cannot read the file, any suggestions on a download that will help you... the file is a. ISO file

  Hello

  Install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  You can ignore the text which says that it is for network installations and also ignore the text informing Windows/Microsoft Update If a single update of a PC.

  It is an executable file (.exe) that must just run and install, i.e., it is not an iso file that will be used to create a CD which included the executable.

  Just like the iso file, it can be saved to a Flash DRIVE on another PC before running on the PC to update.

  So try and get up-to-date with the Windows updates.

  Tricky

• Failed to read the sticker product key on the bottom of the laptop.

  I had to get a new hard drive and reinstall windows, but was unable to read the product key at the bottom of my laptop. I used a download called "Magical Jelly Bean Keyfinder" and received the key from my old hard drive. When I type in it says it is invalid. What can I do?

  I had to get a new hard drive and reinstall windows, but was unable to read the product key at the bottom of my laptop. I used a download called "Magical Jelly Bean Keyfinder" and received the key from my old hard drive. When I type in it says it is invalid. What can I do?

  Your laptop probably came with Windows preinstalled. If so, the key, it was installed with is not * your * key. ; It is a General key used by the manufacturer for the preinstallation of Windows on * several * computers. This key, which got you with "Magical Jelly Bean Keyfinder" is not the same color as the NCB on the sticker on the laptop, and it is not the key you need to reinstall Windows.

  Contact the manufacturer of the laptop to know what to do.

• Failed to read the WSDL to the URL after upgrade to CF9

  We have just upgraded our server ColdFusion MX 7 to version 9, and now we can no longer call local web services. Instead, we get an error "Unable to read the URL... WSDL". Error: 401 Unauthorized. »

  I tried this:

  "< cfhttp url ="http://dw3/test/sayhello.cfc?wsdl "/>"
  < cfdump var = "#cfhttp #" >

  and get this result:

  < h1 > you are not authorized to view this page < / h1 >

  You are not authorized to view this directory or page due to the (ACL) access control list that is configured for this resource on the Web server. < hr >...

  < h2 > HTTP error 401.3 - Unauthorized: access is denied due to an ACL on the requested resource. < br > Internet Information Services (IIS) < / h2 >

  We have not changed any of the permissions. on directories. and I tried to run the EFA to other directories without luck.

  We have improved by uninstalling MX7 and do a new installation of CF9 at the same place (config mutliserver in both cases). Wonder if that may have something to do with it.

  Any ideas?

  Windows server 2003 IIS 6.

  Thank you

  Bob

  The Hospital for Sick Children

  Looks like an IIS config issue rather than a CF one: it's IIS refusing to serve the file, not of CF.  According to the msg of error, did you check that there is nothing untoward with file system permissions?

  --

  Adam

• Failed to read the WSDL to the URL

  It is my first web service. I thought I read that the service registers itself when it is run first, but it is simply not jump for me. I would try to save it, but I don't know how to fill all the holes in the form of registry of Web Service in the CF administrator.
  
  I think I'm doing this pretty plain and simple. Any ideas why it does not work? Tried both methods, both give the same error-"Unable to read the URL WSDL.
  
  The call URL: http://prod.trollsoftware.com/echotest.cfm
  Look at: http://prod.trollsoftware.com/trollws.cfc?wsdl
  which seems good to me, but what do I know? This is my first...
  
  RLS

  AHA! It is not often that a 'eureka moment' happens, then I will celebrate it a bit.

  I started to think about the fact that I could pass the service works with domain name of my ISP for my server, but not with my own and the fact that cfSearching could execute aok but I couldn't. I threw my colleague cannot run, and I don't exactly have a response for that.

  But with all the mappings and trapping and what-not in place, I started to experiment with different variations on the URL that was called, suddenly realize / assuming that I had to specify only the name of path because it was all internal. That's when I realized that when you're inside (firewall?) network of the ISP, the IP number is radically different from the one who sees the rest of the world. When a local domain name I call a service on the same server, it is not going to get outside the firewall looking for this service (http requests are different, I learned; web services a few twists along the way and do not follow the normal rules.)

  When I changed the URL to use the address IP INTERNAL (10.x.x.x), Voila! Worked like a charm.

  Here is the problem now in coding: when I call the service from a domain to the INSIDE of this same server, I need to use the internal IP address, otherwise, I need to use the external IP address.

  My guess is that this may very well be the solution for a number of you experience the same problem.

  Hope that helped.

  RLS

• Failed to read the WSDL file in GOSA

  Hi all
  IAM trying to record the process BPEL on GOSA, but it gives me error saying unable to find the WSDL error.
  When I test the Web Service directly from the Web Page, it loads the WSDL on the Test Page.
  But the moment that the wsdl is wrapped with virtualized wsdl, it gives the following error
  
  Cannot read the WSDL for http://192.168.190.47:9700 / Cnoyau/TestGateway/services/SID0003003? WSDL:WSDL not found
  
  According to the document troubleshooting, this error can occur for 2 reasons
  1. If the door is not properly registered on the Gateway.properties file.
  2. If there is proxy or firewall problem.
  
  Given that the Service is local to the same server I don't see any problem of firewall or proxy and I checked the gateway properties file where the ID of the gateway is register. I see this ID on file.
  
  
  Does someone can tell what could be the problem?
  
  Concerning
  Sabir

  Hi Sab2

  Please go through this thread

  GOSA gateway problem

  In your case, maybe you need to redeploy the gateway

  Kind regards
  Squirrell

• hard to read the fuzzy text files

  With the new CD player, I find that the files are very difficult to read.  The text is small and fuzzy.  What should do?  Large and heavy fonts as in some titles to show bright along the pixels.  A way to solve this problem?

  Repair failed

  I have the latest version.

  Dan

• Web design resource who reads the entered text in html file

  Hello

  I have a Web page that displays the contents of a JSON array published by a Web Service in LabVIEW currently. The web page also accepts input from the user. See attached extract entries. The HTML code associated with entries is fixed also. Currently, when the page is refereshed the values entered in the text fields disappear. So, I want to be able to store values entered in the space of memory of the web service in some way. Perhaps through the use of NPSV? If so, the page is refreshed, the input fields can then be re-populated rereading the information stored inside the NPSV.

  I started the position down the path of creating a resourc web which would read as follows in these values, but I don't know how to do this job.

  Someone you will suggest a way that this could work? Perhaps refer to examples?

  I'm using LabVIEW 2015 SP1 on a cRIO-9068.

  See you soon

  Conrad

  Hello

  Have you seen the following:

  https://decibel.NI.com/content/docs/doc-41659

• Failed to read the HTTP HDL-hds-live/livepkgr flow

  Dear Sir

  I am just turn into FMS 4.5 and want to broadcast both Flash and iOS.

  I installed FMS 4.5 and streaming to the direct application and works very well.

  As you already know, to offer both Flash and iOS, I use livepkgr for HTTP streaming, but reckoned he won't play when using the tool of suggested reading.

  I have well configured Flash Media Encoder for synchronization, rtmp://localhost/livepkgr in the FMS URL field and livestream? adbe-live-event = liveevent in the text box of the flow for only HTTP streaming. When you try to play the streaming via this HTTP URL:

  http://localhost:8134/HDS-live/livepkgr/_definst_/LiveEvent/Livestream.F4M

  It shows this message: we have problems with playback. We apologize for the inconvenience.

  If I type http://localhost:8134/hds-live/livepkgr/_definst_/liveevent/livestream.f4m directly in the browser address bar to see if the file exists, this is what I got:

  "< manifest xmlns="http://ns.adobe.com/f4m/1.0">"

  < id > livepkgr/events/_definst_/liveevent < /ID >

  < streamType > Live < / streamType >

  < duration > 0 < / duration >

  "< bootstrapInfo profile="named"' url= '... /... /.. /Streams/livepkgr/Streams/_definst_/livestream/livestream.bootstrap' id="bootstrap8547">< / bootstrapInfo >

  "< media streamId="livestream" url= '.. /.. /.. / Streams/livepkgr/Streams/_definst_/livestream/livestream" bootstrapInfoId= "bootstrap8547"> "

  < metadata >

  AgAKb25NZXRhRGF0YQgAAAAAAAV3aWR0aABAhAAAAAAAAAAGaGVpZ2h0AEB2gAAAAAAAAAx2aWRlb2NvZGVjaWQCAA RIMjY0AAxhdWRpb2NvZGVjaWQCAAQubXAzAAphdmNwcm9maWxlAEBTQAAAAAAAAAhhdmNsZXZlbABANgAAAAAAAAAP YXVkaW9zYW1wbGVyYXRlAEDVfAAAAAAAAA1hdWRpb2NoYW5uZWxzAEAAAAAAAAAAAAl0cmFja2luZm8KAAAAAwMACX RpbWVzY2FsZQBAj0AAAAAAAAAIbGFuZ3VhZ2UCAANlbmcAAAkDAAl0aW1lc2NhbGUAQI9AAAAAAAAACGxhbmd1YWdl AgADZW5nAAAJAwAJdGltZXNjYWxlAECPQAAAAAAAAAhsYW5ndWFnZQIAA2VuZwAACQAACQ is

  < / metadata >

  < / media >

  < / manifesto >

  Please quick help is really needed.

  Installation directory to check if you have the crossdomain.xml policy file in root FMS webroot folder. If the file is present and you are still not able to play, then you can try the following steps:

  • Stop the publication of Flash Media Live Encoder and disconnect from the FMS.
  • Delete the folder of waterways under /applications/file livepkgr and .stream under /applications/livepkgr/events/_definst_/liveevent folder.
  • Connect to the FMS of Flash Media Live Encoder and start publish it. And then check the reading.

• Failed to read the configuration file. New installation on windows 7

  I just downloaded and installed firefox on my windows 7. No error on installation. When I try to launch Firefox I get this dialog box. Configuration - the configuration file cannot be read. Please contact your system

  administrator.

  Note that you must delete the Firefox program folder to do a clean reinstall to remove the file that is trying to access the mozilla.cfg file which probably does not exist.

• Failed to read the docs epub, cannot install the epub reader (not compatible with Firefox 8.0.1)?

  I downloaded a Smashwords.com manuscript to EPUB. This is my manuscript, and I must be able to read in this format. However, it is incomprehensible. I tried to install the epub 1.4.1.0 drive, but got the message that it is not compatible with Firefox 8.0.1. I also tried to install digital Adobe and Adobe 7.0, but Firefox is not letting me. I need to be able to read this epub document! Thank you.

  Please install this Add-on . This should dispel the compatibility issues.

• Satellite A200 - issue USB ports - failed to read the USB

  I have a Satellite A200 series - and when I insert a dongle in the USB Ports - nothing is read or seen when I go via explores.
  In this case for an external mouse or my USB storage - yet it will recognize my Ipod when I need to recharge the battery.

  All of the suggestions, I'll be very grateful.

  See you soon

  Li Li

  Hello

  First of all, it would be interesting to know if you are using the OS preinstalled Toshiba.
  Second, you must check the status of the USB controller in Device Manager.

  I recommend you to unplug all external USB devices to the laptop.
  Delete all the USB root hubs and Device Manager USB host controllers.
  Then restart the laptop and wait until Windows will reinstall all USB ports again.
  Then you can plug in a USB mouse or USB again.

  Check it out

• CD/DVD players in two different tours of HP fail to read the Cd or DVD after update of race to the computer through Microsoft Update. How can I fix it?

  I tried Microsoft Fix - It and the PC-Doctor siftware that accompanies my laps. Is it not a little bit unlikely that they both quit at the same time? Please help if you can.

  Hi E.J.Berry,
   
  -Do you remember the number of the Knowledge Base (KB) of the update has been installed recently?
   
  View the history of facility to check the installed updates.
  To view the history of installation, follow these steps:

  a. click Start, point to all programsand then click Windows Update or Microsoft Update.

  b. on the Web site, click view update history.

  c. find the latest entry for the specific update.

  d. Note the color of the icon in the status column. If the icon is green, the update has been installed. If the icon is red, the update is not installed.

  Run the troubleshooter from this link and check if it helps to fix the problem:

  Your CD or DVD drive cannot read or write media