DVD player always causes the reboot and hardware failure

Similar Questions

• On Windows 7, by pressing the eject button on the DVD player sometimes causes the monitors to twinkle

  My PC works fine for just about everything, except when I need to pop in a CD or DVD. It seems random, but when I hit the eject button on the DVD player, my screens sometimes twinkle. It happens about once every 5 times as the button eject. I'm running a dual monitor, with a monitor on a DVI input and the other on a HDMI input. Both monitors sparkle.

  The only things I can think of that can cause the problem are of my diet or my graphics card. My PC has never stopped on me during other operations, including executing some more processor intensive tasks. This seems to be a problem with my graphics card, but why my graphics card would randomly hitting the eject button?

  Windows 7 Enterprise SP1 (64-bit)
  Intel Core i5-2400 s Sandy Bridge 2.5 GHz (3.3 GHz Turbo Boost) LGA 1155 65W Quad - Core Desktop Processor Intel HD Graphics 2000 BX80623I52400S
  G.SKILL Ripjaws Series 8 GB (2 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800) desktop memory model F3-12800CL9D-8GBRL
  ASUS black drive Blu - ray SATA model BC-12B1ST/BLK/B/AS - OEM
  ASUS P8H67-M PRO/CSM (REV 3.0) LGA 1155 Intel H67 HDMI SATA 6 Gb/s USB 3.0 Micro ATX Intel Motherboard
  XIGMATEK NRP - PC series ACXTNRP-PC402 400W ATX12V Ver.2.3 80 PLUS BRONZE certified Active PFC power supply

  I found the solution to my problem of graphics. Wow, really?

  So after the video driver updated, he set a maximum resolution on my HDMI output to 1600 x 900. That's if access you the resolution settings through the control panel > display > adjust resolution. Is not that how most people set the resolution?

  The update of the driver has replaced the max resolution by default setting, but it can be given via Intel display control panel (no was not yet aware, I had such a control panel). This control panel option is available for the Intel graphics controller hardware. To set the resolution, right click on the desktop and select "graphics properties." Select 'Advanced Mode', and then configure the resolution 1920 x 1080. Once the parameter is committed through this control panel, the Windows 7 Control Panel settings to work as you would expect, and the monitor is the 1080 p display.

  It is delayed. Pardon my French.

  Well, at least now I'm back where I started, IE still has the problem with the eject button causing the dual display to flicker. It happened only twice since the update of the video driver, then perhaps that these events were flukes?

• Mouse and keyboard Centre 1.1 64-bit (Win7) causing the reboot and without sleep

  Mouse and keyboard Centre 1.1 64-bit (Win7) has recently been installed and since the machine will not regularly sleep, will restart automatically and has projected blue several times during these reboots.  I went back to a previous point and everything seemed fine.  Then reinstalled mouse and keyboard Centre 1.1 64-bit as it was downloaded as part of the automatic update.  Same problems reappear.  Could not find this as a known issue or patches.  Help.

  Hello

  I suggest you to visit:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  You can go to the section to perform a restore of the system.

  Note:  When checking a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.

  Note: Formatting a disk deletes all the data in there. This is why make a backup.

  It would be useful for us to identify the problem, if you could upload the dump file.

  You can use the Sky-drive to download the dump file. See the link below for steps on how to download Sky-Drive.

  http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65.

  The location of the dump file is C:\Windows\Minidump\.

• My Windows Media Player only burns the 1st and last titles, nothing in between, anyone have a solution?

  My Windows Media Player only burns the 1st and last titles, nothing in between, anyone have a solution?... the titles of the first and the last burn, but the tracks between say ERROR OCCURRED, it was working perfectly last night!

  original title: Windows Media Player does not burn!

  Hello

  1. What is the exact error message you get during combustion?
  2. were there any changes (hardware or software) to the computer before the show?

  Method 1: Run the Fixit and see if it helps.
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2: perform the steps mentioned below and see if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Click on the link mentioned below as reference.
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Hope this information helps.

• I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor.

  I have an Acer Aspire One Netbook.  (No DVD player).  From the start on the hard drive, I get a black screen with a blinking cursor.  The cursor does not type.  For me, maybe I need to reinstall windows 7 and startup tasks are corrupt.  I have my product key genuine for the computer, but no way to get to windows.  How to restore windows on a netbook that won't start?

  original title: Netbook Windows 7 problem

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  Borrow a 32 bit Genuine Windows 7 friends DVD disc if you know someone who has one.

  Make an image of the DVD, you can use a program like ISO Recorder to do.
  http://alexfeinman.com/

  If you don't have a Windows 7 DVD to borrow, try to upload a picture:

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  You change the content of the. ISO file and delete the ei.cfg file. After having edited burn it to a blank DVD disc or put it on a USB key. Startup, it will reveal all editions of Windows 7, select the Starter edition. More information in the following article on how to change the file ei.cfg

  Utility delete EI.cfg allows you to use a product key
  http://Lifehacker.com/#%215438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-Windows-7-disc

  You can create a bootable USB stick with the following:
  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key (this is the key of Windows 7 Starter, which would be located on the COA sticker at the bottom of your laptop)

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

  Once activation is complete, enjoy yourself, make a backup of your installation of Windows 7 Starter please? You will need to do this an external hard drive, but its worth it. Because if your installation is messed up, all you have to do is to restore from a backup.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Once the backup is complete, you can do an upgrade to Windows 7 Professional by using the product key that you have, if it's a full key, Windows 7 Professional Anytime Upgrade retail or upgrade license key.

  Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key of Windows 7 Professional on demand, click Next and restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained.

  Reactivate the installation, you may also do it by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

• Jump in the middle of an audio track streaming on various sites causes the stuttering and audio glitch

  Hello

  Please refer to this thread for support on the technical support of SoundCloud forums. The thread contains all relevant information, including videos of the screenshots problem and console, made by myself and others. https://www.soundcloudcommunity.com/SoundCloud/topics/skipping-to-the-middle-of-a-track-causes-stuttering-and-glitchy-audio-chrome-Firefox

  In short, when you try to move forward for streaming audio, there is a memory buffer/stuttering problem that prevents a correct reading of the track. This problem is confirmed on SoundCloud and Traxsource and other people in the support thread mentioned Mixcloud and other streaming sites. In other words, it is not the special streaming service fault or another.

  The problem does not occur in Microsoft Edge, Internet Explorer or Chrome. Well, to clarify, when the issue was published on SoundCloud support forums, Chrome was having the same problem. However, they made a version a few days ago thrust, that fixed it.

  Here's my original on the SoundCloud support post (less), which has the relevant details. Note that we have updated both Flash and Firefox recently, so although I have mentioned earlier in my original post, everyone involved has since updated their browsers and Flash.

  From now on, the only solution for the problem is to go back to Firefox 40.0.2. Thanks for any help =)

  Matt

  Original message =.

  Jump in the middle of a track causes the stuttering and audio glitch (Firefox).

  I am running Windows 10 Pro.

  There seems to be a problem of caching that affect reading - I started noticing this problem three or four days ago. Previously, I could jump through my feeds at will, go straight until the middle of the tracks or mixes of listen seconds and determine if I liked the track. Now, I can't do it on Firefox 41.0.1. The problem is simply annoying on songs that are 3 or 4 minutes in length, as I must leave "cache" maybe ten seconds before jumping. Unfortunately, the problem is a game-breaker on mixtures which, for example, are 90 minutes long. If I jump to a point directly in the middle of the combination, nothing happens. The play button alternates between the 'Play' symbol and the symbol of 'Caching' ('... "), and so audio resumes, it is glitchy and consists of different parts of the track being played at the same time.

  I've eliminated my internet connection as the source of the problem by loading on board. On the edge of 20.10240.16384, the problem does not exist. I can scroll down to any mix of 2 hours in my stream, click on the middle of it, and the audio starts right up. No caching, without stuttering or glitching.

  I drove back Flash version 18 to see if it solved the problem in Firefox, but it did not. The problem persisted, so I re-updated to Flash 19.

  Yes, I understand how all versions and updates to work. I meant it as a generation of powder magazine. My bad.

  I consider this problem to be solved. Several different pre-release versions of Firefox have solved the problem; I have personally used both of them that work perfectly. A representative of Bugzilla stated that the patch will be integrated into Firefox 42, which will be released on 3 November.

  https://www.soundcloudcommunity.com/SoundCloud/topics/skipping-to-the-middle-of-a-track-causes-stuttering-and-glitchy-audio-chrome-Firefox?topic-reply-list [Settings] [filter_by] = all & question-answer-list [parameters] [reply_id] = 16269116 #reply_16269116

  I now consider this private matter. Thanks to all of you who have been here =)

• My dvd drive opens at the beginning and will not be closed.

  My dvd drive opens at the beginning and will not be closed. How can I solve this problem?

  Hi Showme66,

  A. from when what happens?

  B. what happens when you try to close the drive?

  C. recent changes made on the computer?

  D. the DVD drive opens automatically at startup?

  This problem may occur if one of the following scenarios is true:

  • Drivers filter in the CD and the DVD storage stack are not migrated successfully to Windows Vista.
  • You have uninstalled the CD software that fails to withdraw properly in the registry.
  • You have installed software that adds filter drivers in the CD and the storage stack of DVDs that interfere with existing filters.

  To resolve this issue automatically, click the fix this problem link. Then, click run now button from the Automated Troubleshooting Services page and follow the steps in this wizard.

  http://support.Microsoft.com/kb/929461

  Please post back the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] Marking a post as answer, or relatively useful, you help others find the answer faster

• His grave suddenly on a DVD player, but in the first, still and WM Player

  Hello

  The sound on the DVD I burned in still suddenly falls to almost inaudible--but only when played on a DVD player! The problem does not occur on a computer (well in the first, still and DVD sounds good on all players like windows media, real player, etc.).

  Drop noise happens in the same place, about 40 seconds in the 1/2 hour video. Then, the sound blasts at full volume for the end credits I inspected the 2 audio tracks in the first and track volumes do not change, nor my knots of volume control in the securities themselves explain the problem.

  Why it would sound good in all applications on a computer, but not on a DVD player... and why the first 40 seconds would sound good on the DVD player?

  I could hear volume of 'regular' dialogue in the left and much softer, but not absent, in the right. I can't guarantee this isn't an artifact on this end.

  I think you have solved the audio problem at first. Looks like you have a stereo audio track from a source who had a microphone in a single channel. Instead of panning, "fill right" (or left, I always have to check myself on this) so that you get the dialogue on both sides.

  I don't think that you dismissed a phase problem. But I suspect that when solve you the problem of the track, your audio will be correct.

• Satellite L500 - CD/DVD player has stopped playing CDs and DVDs

  I was with Windows Media Player yesterday to copy music to my MP4 Player. It read 2 cd, but on the 3rd, it stopped working. I thought it was because it was a CD however, burned my CD store, I tried buying and everything and even DVD and it takes forever for the driver trying to read, and then in the my computer window, it pops up a message: "Please insert a disc into drive D" and ejects the CD or DVD.

  I checked the properties and it says that the device is functioning properly.

  I even ran the PC DIagnotistc tool on the D drive, but he jumps right over him.

  Any ideas? My phone is only a month or 2 old.

  Remove the optical drive from the list of Device Manager and restart your laptop.
  After reboot, the device must be installed again.
  Check the feature using different CD and DVD.

  What model of laptop do you have exactly?

• DVD player always checks when wmediaplayer opens

  I have notebook Probook 4730 s, Windows 7 Home premium 64-bit, the problem is that whenever opens mediaplayer 12, it is something check the dvd player and it makes noise. I would really like to get rid of it because I can't stand it. Can anyone suggest me how to disable the verification of dvd disc? He has been the first boot of windows, it does not any of third party software, and it also does in the other mediaplayers not only in wmp 12.

  Hello

  Try this and let me know if it makes a difference to the question.

  Click on the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the drive and restart the laptop.

  Kind regards

  DP - K

• DVD Player cannot read the DVDs (but can read busy DVD)

  Hello

  I have Hp Pavilion dv6-6140us, a 64-bit engine and is running windows 7... I wanted to burn the iso of windows 8, but my dvd player is not able to read blank dvd, but it can read the non-empty disc and can also play movies... Please help... want to try to win 8 preview release

  Hello

  Follow these steps to reinstall the Beats Audio interface.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52658.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are done, reboot the laptop and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• DVD ROM disappeared from the computer and VISTA Device Manager

  Hello

  I know there are a lot of discussions on the same topic, but I read everything and still my problem persists.

  I'm pretty sure that the problem occurred after installing iTunes. The DVD ROM is no longer accessible on my laptop. The light flashes and the attempts to start a disk, but then nothing.

  I was in the high register looking for filters and bass to remove (such as published in the number of threads). I found only UpperFilters which I deleted but still nothing. I also tried Microsoft FixIt but does not have the ROM either.

  What to do next? Can anyone help? He began to depress me now.

  Well, I have solved my problem. After trying everything I read and was advised to try.

  I simply unplugged the laptop and handed. Then, I reviewed the reader noticing only so slightly, I could see the silver housing of the reader. So I applied a bit of pressure, pushing the player to the laptop so that I could see is no longer the silver case.

  I have not for a minute think that might be the problem. Once the laptop is started, Windows immediately installed the driver and open computer it was. DVD ROM restored.

  Not sure if this may help someone of you guys, but if I post my "fix" :-)

• DVD Player opens to the grey screen - audio is OK

  iMac 7.1-480 GB SSD, 6 GB RAM, 27 "screen. You try to view DVD DVD player. Program starts normally, but when playing DVD we get grey screen, no video at all. However, audio plays normally. Have tried this with several DVDs, all have the same answer. See screenshot, below.

  

  The Mac has run DVD player very well in the past, no problem.

  Computer works fine in all other respects. Any help/recommendations would be appreciated.

  A screenshot from the DVD player would be grey like that but obviously it should play ok on the screen.

• Picking and Portege M400 displacement causes the crash and locking of the

  I have a new problem with Portege M400, which began a few days ago.

  If I pick it up or move it, then it will crash or lock up. I wonder if anyone has any idea as to what may be the cause of this and what can be done?
  My only guess is to replace the hard drive?

  Thank you
  Greg

  > Turn off accelerometer does not help. Internet research indicates that it is possible a motherboard problem. Replacement motherboard solves problems for about 6 months to a year, then it returns.

  I doubt that it could be a motherboard problem, what the gbaniseter say this happens when it pick up or move the m400, then it will crash or lock up.
  This seems to be a problem of HARD drive and it s nothing uncommon who, after a long period of use of the disk HARD start HARD drive malfunction is a sensitive device and can die because of the physical restraint
  Replace the HARD drive and check if the problem would happen!

• Satellite P20: Device DVD Player reads only the DVD but cannot burn CD & DVD

  Hello

  I have a toshiba P20, and I'm having a lot of problems with it. One of them is my DVD UJ811. I don't really know what is happening, the drive was already replaced and a few weeks later, it was exactly like the front, and the service provider made me pay almost 70EUR for a budget of 400EUR rejected.

  I would like to know what really should do, I can't read the CD and I can not burn CD/DVDs, I can just read DVDs, nothing else.

  I have seen some forums on the net, too many people in the world has the same problem I have and I really need to know what is the best solution for me.
  Thank you

  Hello Rafael

  I'm very surprised by your post it here because I've used Satellite P20-303 (a red) about two years. Laptop is now used by my brother and it works perfectly. I don't really know what problems you have, but I never noticed anything suspicious. Up to now I removed the cooling Grill on the bottom twice to clean the unit, and that's all. After that laptop computer cleanup runs a lot more quiet then before.

  Back to ad: I have to be honest and say that I traded with TEAC DV - W22E DVD - rom. original drive was DVD - RW and TEAC DV-W22E DVD-RAM. My brother use it pretty extensively, but until now there is no problem at all.

  I don't really know what the service is doing, but if possible replace the drive TEAC one. I can tell you with certainty, it works very well. Moreover, according to the description of your problem, I am sure that the drive is faulty.
  You can replace one. It's very simple to do.