Failed to retrieve the kernel symbols.

Similar Questions

• Failed to retrieve the kernel symbols does not have not to initialize the monitoring device can not find valid peer to connect to

  Hello

  I use vmware fusion 5.0.3 on osx 10.7.5. When I start the VM I get these three messages.

  Following this article, I opened the package VM and deleted the .nvram file.

  Still no go.

  I'm a fool. I had renamed some time ago mach_kernel file to test the caching of kernel from loading. This article Impossible to retrieve the kernel symbols gave me the idea to check the file mach.

• Mavericks 10.9.1 with Fusion 5.0.4 cannot retrieve the kernel symbols

  I used my VM yesterday and opened my laptop today for the following errors.

  Failed to retrieve the kernel symbols

  Failed to initialize the device monitor

  Cannot find a valid peer to connect to

  
  

  Here are the steps of troubleshooting, I found other posts.
  

  uname - a

  Darwin private-mbp-2 13.0.0 Darwin Kernel Version 13.0.0: Sun Sep 19 22:22:27 CDT 2013; root:XNU-2422.1.72~6/RELEASE_X86_64 x86_64

  system_profiler SPSoftwareDataType

  Software:

  Presentation of the system software:

  The system version: OS X 10.9.1 (B 13, 42)

  Kernel version: 13.0.0 Darwin

  Boot volume: Macintosh HD

  Boot Mode: Normal

  Name of the computer: MacBook Pro of Rob

  Username: Rob

  Ensure the virtual memory: enabled

  Since the start time: 05:25

  ls-l /mach_kernel

  
  

  -rwxr-xr-x @ 1 root wheel 0 18 Feb 09:35 /mach_kernel

  
  

  I noticed that the mach_kernel was missing and I touch /mach_kernel.

  
  

  Any suggestions on how to get this working again?
  

  beyonder74 wrote: How do I replace the mach_kernel file?

  If you use Time Machine you could restore it from there, but you will first need to use the following command in a Terminal to show hidden system files.  Tip: Copy and paste the commands vs type!

  write QLEnableXRayFolders AppleShowAllFiles TRUE; Killall Finder

  Then, go to Time Machine and restore it and use later...

  write QLEnableXRayFolders AppleShowAllFiles FALSE; Killall Finder

  To hide hidden system files.

  If you do not use the Time Machine , normally we can (re) install the latest Combo update to restore it but there wasn't one, but for OS X 10.9 Mavericks so you'll need to get a copy of another OS X 10.9.0 or 10.9.1 install as it is the same in both.

  Worst case scenario, take a look on: OS X Mavericks: reinstall OS X

• Fusion 7.1.0 obtained just hit with "unable to retrieve the kernel symbols.

  Hello

  7.1.1 that did not work, I tried update

  tried to come back with TM on VM file, no luck.

  Pointers would be appreciated!

  ilandmac

  If you use Fusion 7.x for Mac OS X 10.9.x, almost certainly your host OS is in an inconsistent state.  Merger depends on some very low level of the Mac OS X host, and the error you see suggests that these low-level features do not work as expected.

  See my post on the subject here: Re: impossible to recover the kernel symbols

  See you soon,.

  --

  Darius

• Failed to retrieve the configuration of database file when installing EBS on 2 nodes

  I try to install EBS 12.1.1 on two different nodes on Redhat Linux 5. After properly installing the database on node1 (ebsdb), I started rapidwiz on node2 (ebsapps) to install the application technology. When I get to the screen where it asks "Do you want to create a new configuration or load a saved?", I chose to load a saved configuration, typied in the database connection information (ebsdb.sparkdb.com:PROD:1521) and get the following error. Anyone know what I am doing wrong? I am able to ssh to ebsdb to ebsapps and vice versa, and the database and listener is in place.
  
  Failed to retrieve the database configuration file.

  user564785 wrote:
  What file must be copied from DB node to the node of Apps and what place?

  conf_.txt - http://docs.oracle.com/cd/E18727_01/doc.121/e12842/T422699g54568.htm

  You can copy the file to any place on the application-level nodes.

  Thank you
  Hussein

• Failed to retrieve the mappings for the server. Reason: null

  I get the following in the Console error when I add or update my server

  [oolocal], (07 / 14 at 04:40:11): server is available. Get the settings from the server to the server
  [oolocal], error, 07 / 14 at 04:40:12, impossible to fetch Server mappings. Reason: null
  [oolocal], error, 07 / 14 at 04:40:12, failed to get the logs directory. Reason: null

  Standalone CF8

  Webroot in c:\inetpub

  RDS works (so I can browse the datasource)

  Kind regards

  Aaron

  This problem is known. Failed to retrieve the mappings for the server. Reason: null. We fix it.

  Just to check the parameters are collected successfully from the server. Create the project and join the server to the same. CFM open and type must identify the data sources.

• UCM - BPEL failed to retrieve the form of update process. Cannot run the service

  Hello
  
  
  I am trying to integrate the University Complutense of MADRID 10.1.3.3.3 with BPEL 10.1.3.5, I already installed the component of the UCM BPEL and updated the jar files in/custom/BpelIntegration/lib with the pot in BPEL.
  
  Also define the connection between UCM and BPEL
  
  the Configuration ID: Local
  Description: Local BPEL
  Domain: by default
  
  JNDI properties
  First factory of context: oracle.j2ee.rmi.RMIInitialContextFactory
  The provider URL: opmn:ormi://localhost:6105:oc4j_soa / orabpel
  Principal: oc4jadmin
  Identification of security information: *.
  
  When I test the connection it seems to be valid "JNDI parameters were validated successfully."
  
  but when I try to create a process with bpel configuration, the following ERROR Message appears:
  
  Content Server request failed
  Failed to retrieve the form of update process. Unable to run the 'getDeployedProcesses' of service method. (System error: runtime error: java.lang.IllegalStateException: can't replace cause)
  at java.lang.Throwable.initCause(Throwable.java:320)
  to bpelintegration. OracleIntegration.getAllProcesses (OracleIntegration.java:265)
  to bpelintegration. OracleIntegration.getBpelProcesses (OracleIntegration.java:184)
  to bpelintegration. OraBpelHandler.getDeployedProcesses (OraBpelHandler.java:224)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461)
  at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:142)
  at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:75)
  at intradoc.server.Service.doCodeEx(Service.java:488)
  at intradoc.server.Service.doCode(Service.java:470)
  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350)
  at intradoc.server.Service.doAction(Service.java:450)
  at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191)
  at intradoc.server.Service.doActions(Service.java:445)
  at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1111)
  at intradoc.server.Service.executeActions(Service.java:431)
  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:632)
  at intradoc.server.Service.doRequest(Service.java:1709)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:357)
  at intradoc.server.IdcServerThread.run (IdcServerThread.java:195))
  + [Details] +.
  + Battery service for this request is - ORABPEL_PROCESS_UPDATE_FORM (* no captured values *) java.lang.IllegalStateException: can't replace cause to java.lang.Throwable.initCause(Throwable.java:320) to bpelintegration. OracleIntegration.getAllProcesses (OracleIntegration.java:265) to bpelintegration. OracleIntegration.getBpelProcesses (OracleIntegration.java:184) to bpelintegration. (OraBpelHandler.getDeployedProcesses(OraBpelHandler.java:224) at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461) at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:142) at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:75) at intradoc.server.Service.doCodeEx(Service.java:488) at intradoc.server.Service.doCode(Service.java:470) at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350) at intradoc.server.Service.doAction) Service.java:450) to intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191) to intradoc.server.Service.doActions(Service.java:445) to intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1111) to intradoc.server.Service.executeActions(Service.java:431) to intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:632) to intradoc.server.Service.doRequest(Service.java:1709) to intradoc.server.ServiceManager.processCommand(ServiceManager.java:357) to intradoc.server.IdcServerThread.run(IdcServerThread.java:195) +.
  
  
  
  Can someone help me?
  
  Thanks in advance
  
  Carlos Pereira

  Hello

  Workaround for this problem is:

  Copy orabpel - thirdparty.jar/bpel/lib and place it in the folder/custom/BpelIntegration/lib , and add this variable in intradoc.cfg of the CS (stop the content server before performing this change):

  JAVA_CLASSPATH_bpel =/custom/BpelIntegration/lib/orabpel-thirdparty.jar

  Start content server after the steps above have been completed, and then test to see if the problem persists.

  Thank you
  Srinath

• Error running code system. Failed to retrieve the configuration information

  I get this error:
  
  Error running code system. Failed to retrieve the configuration information for the content Terminal item. Unable to load locale 'American English '.
  
  Details:
  
  An error has occurred. The stack trace below shows more information.
  
  ! csSystemCodeExecutionError! csUnableToGetConfigInfoForCheckIn! csLocaleNotFound, English-US
  intradoc.common.ServiceException:! csUnableToGetConfigInfoForCheckIn! csLocaleNotFound, English-US
  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1760)
  at intradoc.server.Service.buildServiceException(Service.java:1997)
  at intradoc.server.Service.createServiceExceptionEx(Service.java:1991)
  at intradoc.server.Service.createServiceException(Service.java:1986)
  at intradoc.server.ServiceHttpImplementor.determineParameterizedLocale(ServiceHttpImplementor.java:609)
  at intradoc.server.ServiceHttpImplementor.initLocale(ServiceHttpImplementor.java:408)
  at intradoc.server.Service.initLocale(Service.java:333)
  at intradoc.server.Service.initDelegatedObjects(Service.java:201)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:358)
  at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
  
  Anebody has an idea
  
  
  Thank you
  REDA

  Hello

  Add the SystemLocale = American English variable in your config.cfg, restarting the CS and then see if the same problem persists.

  Srinath

• WS TP fails to compile the kernel 3.10.0 - 0-generic [SOLVED]

  Host: Ubuntu 13.10 kernel 3.10.0 - 0-generic

  VMware modules fail to rely on this core

  The end of the vmware Installer log

  2013-06-28 01:56:35, 080] stop VMware services:
  Demon of authentication makes VMware
  VM communication interface socket family is
  Virtual machine communication interface is
  Virtual machine monitor makes
  File system is blocking

  [2013-06-28 01:56:35, 542] Starting VMware services:
  Virtual machine monitor failed
  Virtual machine communication interface is
  VM communication interface socket family is
  File system is blocking
  Virtual Ethernet failed
  Demon of authentication makes VMware

  The vmware Installer full log attached as a .tar file.

  Kernel engineers can work on that?  Guess it must be done before the final release, but it would be much sooner.

  There is a patch for the kernel rc 3.10 posted WS 9.0.2 forum but the author (if I read him correctly) seems to say that he didn't need the vmblock module which does not work for me.

  Follow thisL

  https://wiki.archlinux.org/index.php/VMware

  Host: Ubuntu 13.10 Kernel (sallets) 3.10.0 - 2-generic

  Client: Windows 8 x 65

  Comments have VMware Tools installed and has been fully patched.

• Failed to retrieve the target data system for FDM 11.1.2.3 HFM adapter

  Hello gurus,

  : Server 1 HFM

  : Server 2 FDM

  Server 3: Database server

  1. I have managed to create an application of FDM using FDM web client.

  2. later I imported the FDM adapter - FM11X-G6-C in the Workbench of FDM and also saved the file fdmFM11XG6C.dll successfully.

  3. We then defined the Machine profile and also specified with the custom sizes available in our HFM application.

  4. we have then configured the adapter with success.

  5. we get the following question when browse us the metadata -> control tables

  Cannot retrieve the data on the target system

  6 log has the following entry

  Error:

  Code...-2147220966

  Description... System.Runtime.InteropServices.COMException (0x8004021A):

  {0F677127-F815-4495-8290-AF2899C9482F}1-2147220966010/16/2013 07:41:57< servername FDM >CHsxClient.cpp282011.1.2.3.000.4045Unknown error

  at HSXCLIENTLib.HsxClientClass.OpenApplication (String bstrClusterName, String bstrProduct, String bstrApp, ppIUnkServer, & object object & ppIUnkSession)

  at fdmFM11XG6C.clsHFMadapter.fConnect)

  Process... clsFMAdapter.fConnect

  Component... D:\FM11X-G6-C_1002\AdapterComponents\fdmFM11XG6C\fdmFM11XG6C.dll

  Version... 1116

  Identification:

  ... The admin user

  ... Computer name < servername FDM >

  Connection of FINANCIAL MANAGEMENT:

  Name of the application...

  Name of the cluster...

  Field...

  Connect status... No open connection

  * Start the journal entry for the Runtime Error FDM [2013-10-16 07:41:57] *.

  -------------------------------------------------------------

  ERROR:

  Code............................................. 10054

  Description... Adapter function [fConnect] failed.

  Process... clsBlockProcessor.DimensionList

  The component... upsWBlockProcessorDM

  Version.......................................... 1112

  Thread........................................... 80304

  IDENTIFICATION:

  User............................................. admin

  ... Computer name < servername FDM >

  Name of the application... < name of application of FDM >

  Client App....................................... WebClient

  CONNECTION:

  Provider......................................... SQLOLEDB

  Server data... < database server name >

  Name of database < database name >

  Trust connect... Fake

  Connect status... Open connection

  GLOBALS:

  Location......................................... Sample

  Location ID... 748

  Location Seg... 2

  Category......................................... WLCat

  ID of the category... 12

  Period........................................... Oct - 2013

  Period ID........................................ 10/31/2013

  POV Local........................................ Fake

  Language......................................... 1033

  User Level....................................... 1

  All Partitions... True

  Is Auditor....................................... Fake

  * Start the journal entry for the Runtime Error FDM [2013-10-16 07:41:58] *.

  -------------------------------------------------------------

  ERROR:

  Code...-2146818234

  Description... Adapter function [fConnect] failed.

  Procedure........................................ ObjScriptReturnMarshaler.GetDimensionList

  Any help will be much appreciated.

  Thank you all for your help...

  It was a problem with the Machine profile configuration, where I had updated the username and password and it had to remain a Virgin.

  Keep the username blank password in the configuration of the machine profile has solved the problem.

• Failed to retrieve the DIAdem DataFinder research data, using data-finder toolkit LabVIEW 2009

  I am facing problem to retrieve the DIAdem Datafinder data.

  At first, I developed this project in LabVIEW 2010. But because of a problem that I met in LabVIEW 2010, I thougth to work on the project in LabVIEW 2009.

  Then, I reused the project that I created using LV 2010 using option economy for the previous version.

  When I tried to retrieve the data from the tiara using data finder toolkit. I got a 305505 warning. Please see the attached message of Warninig.

  But I have not seen this warning while I was working in LabVIEW 2010 and also, I was able to get the data from the tiara.

  Please suggest me a way to solve this problem.

  Hi Nanda,
  There is a bug when using the SDK use in combination with DataFinder Toolkit 2009.
  This bug is already fixed in LabVIEW 2010 and use SDK 2010. But as you said there is another question in LabVIEW 2010, forcing you to LV 2009.
  I suggest you use LabVIEW 2009 with use SDK 2009 and DataFinder Toolkit 2009 and instead to use the "Waveform.vi results" to read the search results, I would recommend to use the screw storage. I spread your example VI and it attached to this message. You will still see the dialog box to search for "lvStorage.dll" but it will automatically disappear and the VI works anyway because in this case LabVIEW will find the dll itself.
  My extended VI uses the '_openWithRoot.vi' to open a file with a different use than CT or PDM. This VI is also described in the following knowledge base article: http://zone.ni.com/devzone/cda/epd/p/id/4181
  With LabVIEW 2010 use support has been enhanced and fully integrated in the standard palette of storage screws. So in LabVIEW 2010, you can replace the "_openWithRoot.vi" with the 'Open Data Storage.vi' standard but with LabVIEW 2010, you can also use "Waveforms.vi results" to read the search results.

  I hope this helps.

  Kind regards
  Eva

• Failed to retrieve the site definition for the ATG 11.1 site id

  Hello

  I'm trying to access a page /browse created under the site of siteStoreUs in the experience Manager. If I try to access the page of the application, observe the error with the blank page below.

  We work with ATG 11.1

  Please help me to solve this error.

  18:08:32, 401 SEVERE [atg.endeca.assembler.multisite.ExtendedSiteManager] (http-/0.0.0.0:8080-6) unable to retrieve the site for the site id of the site definition: /siteStoreUS: com.endeca.store.exceptions.

  PathNotFoundException: No node found at path: [pages].

  at com.endeca.store.configuration.InternalNode.getNode(InternalNode.java:153) [_DAF. [Endeca.Assembler_slib_sendeca__assembler__core - 11.1.0.jar:11.1.0]

  at com.endeca.store.configuration.InternalNode.getNodeInfo(InternalNode.java:221) [_DAF. [Endeca.Assembler_slib_sendeca__assembler__core - 11.1.0.jar:11.1.0]

  Thanks in advance,

  Ravinder Pogulakonda

  The resolution is here;

  Set storeFactory = / atg/short/assembler/cartridge/manager/DefaultFileStoreFactory in /atg/endeca/assembler/cartridge/manager/DefaultWorkbenchContentSource.properties

  Make sure of course below are configured correctly

  -Site of short Id to the element of site must correspond with the name of the site in the Manager(Ex: If the site name in XM is "homeSite", then Endeca site id in the site item should be "/homeSite") experience

  -Set configurationPath=C:/Endeca/ToolsAndFrameworks/11.1.0/server/workspace/state/repository/ /atg/endeca/assembler/cartridge/manager/DefaultFileStoreFactory.properties

  -Create the user segment in XM to /homeSite as site.homeSite.

  I hope this helps

  Thank you

  Ravinder

• Failed to retrieve the ATG Segments in the short experience Manager

  I am unable to retrieve the segments of ATG users that are created using the BCC in short experience Manager. It shows the error message as 'the user list segments can not be recovered. Contact your system administrator. Unable to load the information in http://localhost:8006/ifcr/sites/CRS.profileGroups.json I just hit the url http://localhost:8006/ifcr/sites/CRS.profileGroups.json then it shows file not found exception as

  java.io.FileNotFoundException: http://localhost: 8080/rest/model/atg/userprofilin... (500) the requested URL /ifcr/sites/CRS.profileGroups.json gave rise to an error in com.endeca.ifcr.profilegroup.ProfileGroupServlet.

  I registered the url to a string of Action REST registry as well. We can not trace of the error. Everyone please help in this regard.

  
  

  Note: ATG Version: 11 short Version: 11.0
  

  • This problem is solved. Solution: no repository group is present in the production instance PublishingAgent. In this case, we have to do the full deployment then PublishingAgent will be produced again all the post data. Already the repository groups are not present. Some sites are disabled. We have completed the full deployment, allowed all sites through dyn/admin. After that, we made the indexing. This solves the problem. Now, the segments are accessible from the Manager of the experience.

• How to deal with the error "failed to get the kernel function pointer".

  I was running smoothly first Pro CC all day today. I stopped at the end of the day and now when I try to launch first yet, only a few hours later, the program will not open and I get the error "unable to get the kernel function pointer.  Help!

  I run first on a Macbook pro i5 processor at 2.3 Ghz with 16 GB RAM, graphic card 512 MB intel HD 3000 running OS 10.10.3.  It worked well (although sometimes a little slowly) for one year. I keep the project file on the portable hard drive, media files on a port firewire 800 Gdrive.  It has been working well.

  The only thing that happened between the first success today and refusal to open the first tonight, I ran something of card/holiday calendar interactive multimedia for my son that I had installed a few days ago but not yet opened. When he installed Abobe AIR opened and did the installation.  To see if this can help, I uninstalled the holiday card and rebooted the computer a couple of times. No dice.

  Help!  Luke

  I have the same problem on several machines. What seems to be the case is first is losing track hence basic audio filters are on the system. The only solution that works for me is uninstalling first, then put it back. I found myself to do this every day or almost.

• Failed to retrieve the value of fnd_profile.value ('ORG_ID') in the custom schema

  Hi all

  I'm recovering the value of profile with below calling a custom procedure created in the custom schema. But it always retrieves NULL.

  v_prof: = fnd_profile.value('ORG_ID');

  But when I create the same procedure in APPS Schema, it retrieves the value.

  I gave all grants to the schema customized for the apps.fnd_profile package. Help, please!

  Kind regards

  Patricia K.

  in the package/proc/func add property 'authid current_user' - using of PL/SQL subprograms

  runtime fnd_profile.value('ORG_ID'); will extract the default apps