Failed to retrieve this file?

Similar Questions

• Failed to retrieve the files saved on an external HD for a restoration of Windows Vista

  My HP laptop was more able to launch Windows Vista. Fortunately, I had a recovery disk for the laptop that was created when I turned first on the laptop several years ago. When I was running the recovery disc, asked me if I wanted to save all the files before the computer was placed back in its original factory condition. I said 'yes' and asked to plug a USB key. I plugged my WD "My Passport" external hard drive with 1 TB of memory. It took more than 12 hours to copy everything (especially photos) on the external drive, then my laptop has been restored. Now my laptop works fine but I cannot access files that have been copied to the external HD Windows says there are 100 GB used on the external hard drive, but none of my files are visible in Windows Explorer. I tried the advanced restore from the backup and Restore Center, but this program does not detect as anything on the external hard drive. How can I get my old files back below the sending of my external hard drive to a data recovery company and pay several hundred dollars? Help, please.

  You perform the operation mentioned such backup in the backup when retrieving files section in the following link:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00814731&LC=en&cc=us&DLC=en

  If that's what you were doing, you need to set up your question in the support of HP that this program was designed and implemented by HP for their computers. Here is a link to the HP's Support Forums:

  http://h30434.www3.HP.com/

  Hope that helps!

• Failed to retrieve the file. The dynamic application file is not in the specified location

  Hi all

  We face below mentioned question when creating content for our portal application web center.

  I configured UCM correctly for my portal application by creating the connection of content in my application resources repository.

  Our Center web version: 11.1.1.8

  1st edition)

  Content Server request failed

  Impossible to recover the file. The dynamic application file is not at the specified location ('/ l01/oracle/middleware/user_projects/domains/Webcntr_domain/ucm/cs/weblayout/resources/wcm/custom/sitestudio/contentwizard/webcenter/contentwizard.hcsp ').

  That's what I did

  In one of my portal page I added the content presenter by entering mode(ctrl+shift+e) contribution and in content configuration presenter window, when I clicked on the button "create Web content".

  It take me to my window to center of oracle and survey web content the above error. Here's the URL that I have in my browser

  http:// < hostname >: < portNumber > / CS/Resources/WCM/Custom/SiteStudio/contentwizard/WebCenter/contentwizard. HCSP

  Just to clarify, even I tried the same thing in the spaces of the web Center as well. I created a TestPortal, adding a page, and on this page when I add the content presenter and clicked on the "Create Web content" button, I get the same question.

  Please suggest me what could be the reason.

  Studio on the Site of 2nd edition) (11.1.1.8), I created all the required element definitions and definitions of the region and they are archived as well. And content of oracle web Center (UCM), I can learn all the definitions xml for these items. But if I want to change their definitions in the site studio, I do not get is it possible to see all the definitions element or definitions of region I created previously. is this kind of bug in 11.1.1.8? Since I was not facing this problem in 11.1.1.6.

  so can anyone suggest something for the issues mentioned above.

  Thank you

  Nassim

  Hello.

  WebCenterConfigure component of the Complutense University of MADRID is responsible for the creation of the contentwizard.hcsp in the folder you specified. Please check if it is enabled, or you will need to reset it.

  In any case no problem of migration, if WebCenterConfigure been activated before it doesn't have an impact, of the contentwizard.hcsp.

  Kind regards.

• Failed to retrieve the files. Press Retry download product again (E20)

  IM USING WINDOWS 10 AND KEEP THIS ERROR download Dreamweaver cc

  Ex 20 is an extraction error.

  Adobe Creative Cloud application will download Compressed file to the Temp folder and then extract it to the same folder, where is the problem.

  Delete the Temp folder once, and then try again.

  You can also check out link below:

  Installation failure - cannot retrieve files... (EX20)

• Failed to retrieve the files downloaded in Illustrator

  I just joined the cloud and was able to install applications with the exception of the Illustrator, where I got the error message "Unable to extract the downloaded file" (U44M1I210)

  Restart Windows did not work, and research has not found the Setup log (although he finds clumps of other files with this suffix). Removing and reinstalling Illustrator didn't get the patch installed, although I was then able to go into InDesign, hit updates and update Illustrator. So problem solved now.

  Kay

• Failed to retrieve. Files - error indicating 0 * 80004005 zip

  Original title: Search search index indexing re-indexing re-index research research research service troubleshooting troubleshooting

  I can't extract the zip file. error 0 * 80004005

  Hello

  1. What is the operating system installed on the computer?

  2. What is the source of the Zip files?

  Method 1 : open the file in administrator mode and check if the problem persists or not.

  A: Right-click on the file you want to extract and select run as administrator.

  Method 2 : temporarily disable the security software and check if the problem persists or not.

  Method 3 : change the location of the extract and check if the problem persists or not.

  Hope that helps.

• Does not open my file of Muse: "this file Adobe Muse of the site requires a newer version of Adobe Muse. Please upgrade to the latest version. »

  My final project for this quarter in a web design class is due in less than a week. And suddenly, after months of work with this exact file, it will not open. I try to open it in CC (the most recent version of Muse) to school. At home, I downloaded a trial version of it. I think that the trial would be the absolute latest version... and even if it wasn't, why can't the even newer version open it? Please help me. And what do I do if my trial version has expired (I'm not home right now, so I can't check...) and I can't open it to fix it (if that's what I had to do..)?

  Note: at school we have CC, always up to date. At home, I have CS6, but downloaded a trial version of Muse. So, I think that the trial would be the most recent and CC not CS6. I don't know, though!

  Note: is there a way to extend my trial version, like, an hour, to retrieve this file? Altogether, it would suck if I can't get it back now. I spent a lot of time on it.

  Could you please send me the file muse at [email protected] along with a link to this topic. If they are more than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc..
  while I can check and help get this resolved?

• When I try to install the 'install Creative Cloud' I get this message "we encountered the following problems: Setup failed in a critical file.» Please try to reinstall. (Error code: 43)

  When I try to install the 'install Creative Cloud' I get this message "we encountered the following problems: Setup failed in a critical file.» Please try to reinstall. (Error code: 43). I tried so many times and repeat me the same mistake. Help, please!

  Please check the resolution:

  • Setup could not copy a critical file. Error code: 43
  • Error code install CC 43

  Concerning

  Stéphane

• I failed repeatedly when downloading files Acrobat_2015_Web_WWMUI.exe then I tried start click on download. but after 5 times I tried, it seems now a notice like this: "Sorry, Too many download attempts: 5. you were allowed to upload only 5 t.

  I failed repeatedly when downloading files Acrobat_2015_Web_WWMUI.exe then I tried start click on download. but after 5 times I tried, it seems now a notice like this:

  "Sorry,

  Too many download attempts: 5. you were allowed to upload only 5 times.

  If you have any questions, please contact Digital River Customer Service to the " [email protected] ."

  How can I re - download the file?

  order number: 10089840159

  Have you tried to download at the bottom of link?

  Download Acrobat products | Standard, Pro | DC, XI, X

• Failed to retrieve the configuration of database file when installing EBS on 2 nodes

  I try to install EBS 12.1.1 on two different nodes on Redhat Linux 5. After properly installing the database on node1 (ebsdb), I started rapidwiz on node2 (ebsapps) to install the application technology. When I get to the screen where it asks "Do you want to create a new configuration or load a saved?", I chose to load a saved configuration, typied in the database connection information (ebsdb.sparkdb.com:PROD:1521) and get the following error. Anyone know what I am doing wrong? I am able to ssh to ebsdb to ebsapps and vice versa, and the database and listener is in place.
  
  Failed to retrieve the database configuration file.

  user564785 wrote:
  What file must be copied from DB node to the node of Apps and what place?

  conf_.txt - http://docs.oracle.com/cd/E18727_01/doc.121/e12842/T422699g54568.htm

  You can copy the file to any place on the application-level nodes.

  Thank you
  Hussein

• Failed to retrieve the LR 5 installation files

  LR5 purchased and downloaded for PC from Amazon. Get the error message: "this is a problem when extracting the files. Check the amount of space available on your computer and the rights to write to the destination folder"when the extraction of installation files. He has more than enough space, and the destination folder is the desktop. This happens on both my Surface (Windows 8.1) and Dell (windows 7). What's wrong?

  This is an incomplete download. the size of the file must be ~871.9mb ~ 892825b

  In addition, it is a self-extracting file.  then you just click (or double click on) the exe file.  do not manually extracted.

  Another option for you, if you have problems with this file:

  If you follow the 7 steps you can directly download a free trial here: http://prodesigntools.com/lightroom-5-ddl-comparison-vs-lr4.html

  and activate it with your serial number.

  If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.

• Thunderbird is not save my password even if I continue to check the Save password box. Fails to retrieve mail when I check the box.

  Recently, I've migrated my profile of Thunderbird to a new computer. Everything works great, except that Thunderbird doesn't remember my password for the account. I am the only user on the machine, and I check only one account, so I don't want to set up a master password... I want just the program to remember my password for the e-mail account. I get the question 'Do you want to save your password?', every time I run the program... but if I check the box to do this, mail is not retrieved. (No error message, just nothing happens.) If I get the password without the box, the mail is retrieved. Even with the sending - I wonder for the time of password the first by session I have send a message. If I check the box 'Save password' send fails. If I do not check the box, sending passes.

  This has been a consistent behavior for about a month now. I'm not just randomly in the password incorrectly. It happens that way every time.

  That is what it is? Y at - it a fix for this? I want to just Thunderbird to remember my password.

  Try this:

  Make folders and hidden files visible

  • http://KB.mozillazine.org/Show_hidden_files_and_folders

  In thunderbird

  • Help > troubleshooting information
  • Click on the view file"" button.

  a new window opens showing profile_name folder.

  • Close Thunderbird now - this is important
  • Scroll down - find and delete this file: key3db
  • Close this window - upper-right X

  Restart Thunderbird.

  At the password prompt, enter the password and select the "Manager password use to remember the password" check box and click OK.

  Note: If you use a product like CCleaner, then it's probably compensation info session and password. In this case, you will need to make an exception for files of thunderbird in CCleaner to stop cleaning Thunderbird.

  Please report on the results.

• SVN: #155021. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information on this problem

  Can Hello anyone help?

  After you configure Subversion in Dreamweaver, I get this error again!

  SVN: 155021 #. You cannot update this file with the help of Dreamweaver Subversion integration because a new Subversion client application on your machine has made updates to the file Subversion meta data. For more information about this issue, see http://www.adobe.com/go/dw_svn_en.

  even after following the instructions http://www.Adobe.com/go/dw_svn_en Download the extension, python change the var in windows to say «;» C:\Python26'

  with & without quotes, with or without; before C

  command > comparability of Subversion to get the following error "the Conversion process has failed. Please make sure you have Python installed and you check Python PATH parameter'

  I managed to get all the files after the installation, I locked, unlocked and commit a file to test fact so that was all works well, the only part I'm not retrieves the latest version, this is because Subversion is 1.6.2 and dreamweaver must revert to the version 1.4.5 on local to work, the compile someone at - it an idea what to try next in order to make it work?

  Just a reminder!

  1. I configure Subversion through guidelines on http://help.Adobe.com/en_US/Dreamweaver/10.0_Using/WS80FE60AC-15F8-45a2-842E-52D29F540FED. html
  2. I managed to get the latest SVN version
  3. Lock, unlock and commit a file
  4. Installed Python in C:\Python26 change the path in windows system properties > advanced > Environment Variables > system variables > New > Python =; C:\Python26 also C:\Python26
     
  5. I also tried the same thing in the User Variables
  6. Installed the extension DW Subversion compatibility
  7. 
     Tried to run the compatibly with the command > Subversion comparability in DW
     

  Welcome any suggestion to solve this?

  Hello

  There has been a lot of problems using svn with dw, and I know many people who have stopped trying to operate correctly.

  As much as I know dw will not work with newer versions of svn (over 1.5), and even then, there are a lot of problems, a possible solution is to try subweaver (at- http://code.google.com/p/subweaver/ ), as this has solved some of the problems associated with the use of tsvn dw environment.

  PZ

• UCM - BPEL failed to retrieve the form of update process. Cannot run the service

  Hello
  
  
  I am trying to integrate the University Complutense of MADRID 10.1.3.3.3 with BPEL 10.1.3.5, I already installed the component of the UCM BPEL and updated the jar files in/custom/BpelIntegration/lib with the pot in BPEL.
  
  Also define the connection between UCM and BPEL
  
  the Configuration ID: Local
  Description: Local BPEL
  Domain: by default
  
  JNDI properties
  First factory of context: oracle.j2ee.rmi.RMIInitialContextFactory
  The provider URL: opmn:ormi://localhost:6105:oc4j_soa / orabpel
  Principal: oc4jadmin
  Identification of security information: *.
  
  When I test the connection it seems to be valid "JNDI parameters were validated successfully."
  
  but when I try to create a process with bpel configuration, the following ERROR Message appears:
  
  Content Server request failed
  Failed to retrieve the form of update process. Unable to run the 'getDeployedProcesses' of service method. (System error: runtime error: java.lang.IllegalStateException: can't replace cause)
  at java.lang.Throwable.initCause(Throwable.java:320)
  to bpelintegration. OracleIntegration.getAllProcesses (OracleIntegration.java:265)
  to bpelintegration. OracleIntegration.getBpelProcesses (OracleIntegration.java:184)
  to bpelintegration. OraBpelHandler.getDeployedProcesses (OraBpelHandler.java:224)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461)
  at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:142)
  at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:75)
  at intradoc.server.Service.doCodeEx(Service.java:488)
  at intradoc.server.Service.doCode(Service.java:470)
  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350)
  at intradoc.server.Service.doAction(Service.java:450)
  at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191)
  at intradoc.server.Service.doActions(Service.java:445)
  at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1111)
  at intradoc.server.Service.executeActions(Service.java:431)
  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:632)
  at intradoc.server.Service.doRequest(Service.java:1709)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:357)
  at intradoc.server.IdcServerThread.run (IdcServerThread.java:195))
  + [Details] +.
  + Battery service for this request is - ORABPEL_PROCESS_UPDATE_FORM (* no captured values *) java.lang.IllegalStateException: can't replace cause to java.lang.Throwable.initCause(Throwable.java:320) to bpelintegration. OracleIntegration.getAllProcesses (OracleIntegration.java:265) to bpelintegration. OracleIntegration.getBpelProcesses (OracleIntegration.java:184) to bpelintegration. (OraBpelHandler.getDeployedProcesses(OraBpelHandler.java:224) at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461) at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:142) at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:75) at intradoc.server.Service.doCodeEx(Service.java:488) at intradoc.server.Service.doCode(Service.java:470) at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350) at intradoc.server.Service.doAction) Service.java:450) to intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191) to intradoc.server.Service.doActions(Service.java:445) to intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1111) to intradoc.server.Service.executeActions(Service.java:431) to intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:632) to intradoc.server.Service.doRequest(Service.java:1709) to intradoc.server.ServiceManager.processCommand(ServiceManager.java:357) to intradoc.server.IdcServerThread.run(IdcServerThread.java:195) +.
  
  
  
  Can someone help me?
  
  Thanks in advance
  
  Carlos Pereira

  Hello

  Workaround for this problem is:

  Copy orabpel - thirdparty.jar/bpel/lib and place it in the folder/custom/BpelIntegration/lib , and add this variable in intradoc.cfg of the CS (stop the content server before performing this change):

  JAVA_CLASSPATH_bpel =/custom/BpelIntegration/lib/orabpel-thirdparty.jar

  Start content server after the steps above have been completed, and then test to see if the problem persists.

  Thank you
  Srinath

• This file is being processed. Please wait until processing is complete, to pass messages.

  When the check 6 accounts on a POP server, I get the message.

  This file is being processed. Please wait until processing is complete, to pass messages.

  This message started 14 2 6 accounts. I tried the suggestions at http://kb.mozillazine.org/Folder_being_processed and none of the suggestions correct the problem.

  Is there anything else I can try?

  Concerning
  AGMNS

  Look again at the anti-virus software, restart your computer in safe mode with network.

  This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  Unfortunately, one of the main aspects of the anti-solutions antivirus is that they are almost impossible to actually 'pause' and fail almost exclusively to disable when they say they are and uninstall when you tell them.