Failed to start the Windows XP machine.

Similar Questions

• Failed to start the Windows Audio Service on Local computer. Error 1053.

  Hello! Last week, I lost all sound elements. When you click the sound icon, I got the error 'there is no available active mixer device. To install mixer devices, go to control panel, click Printers and other devices, and then click Add Hardware . "I'm going through the Add Hardware Wizard, click on that I already added the material and select SigmaTel High Definition Audio Codec. It says "the device is functioning properly." According to Device Manager, the device is functioning properly. When I go to start, run, services.msc and try to start Windows Audio, I get "unable to start the Windows Audio service on Local computer. Error 1053: the service did not demand launch or control in a timely . »

  Can anyone advise me on what to do?

  Hello

  About the message you received, it is likely that your sound driver may be damaged. In this case, try to reinstall the driver.

  You can also go to the website of your computer manufacturer to get the driver. They should have ALL the drivers for your computer model. :-)

• Failed to check for an update. -Failed to start the windows Security Center service

  Well, as I want to check for windows update, it says that "Windows update cannot currently check for updates, because the service is not runing.» You may have to restart your computer. I alrdy restart my laptop several times that the answer is always the same. I think that this problem related to my service center of windows security. for some reason I can't why it may not be on. can someone help with the solution m.e? Thank you

  azbondz,

  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message "Windows cannot open this file 5882103.rbf" to start the Windows XP machine.

  Original title: Windows cannot open this file 5882103.rbf.

  I get this pop-up window when ever I turn on my computer or restart it... Anyone know why this is, or how to solve this problem?

  Hi presler19,

  I recommend you completely configure the computer in a clean boot state by following the article provided in the previous post. Later, check to see if the problem persists.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  original title: error 5 access denied firewall

  Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  Hi vipin sharmavg,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows search Windows failed to start the service on the Local computer

  OK, so it's a big, dirty and convoluted issue, so please bear with me. Any help is greatly appreciated! I start tearing my hair out on this one...

  I'm on Windows 7 Professional 64 bit
  UAC is set to the lowest level 2

  The other day I have problems with the search box in the start bar. It is more was to find excel or other office applications and also he wouldn't orders base as cmd or Notepad. Whenever I run a command it returns an error like this (not exact because I have the exact error message):

  Windows cannot find ': search query = cmd'
  
  I searched a little and tried to rebuild the index in Control Panel > Indexing Options. It does not work so I uninstalled Windows Search and reinstalled. What I found now, is that the indexing service would not start and if I tried manually start from services.msc I would get the following error:

  Windows search Windows failed to start the service on the Local computer
  Error 161: the specified path is not valid

  The event log showed me this Application error:

  Cannot initialize the Gatherer service.

  Details:

  The Temp folder is on a drive that is full or inaccessible. Free space on the drive or verify that you have permission write to the Temp folder. (HRESULT: 0 X 80070660) (0 x 80070660)
  

  Help!

  Thanks Samhrutha.
  Your proposed solution of editing the registry is the only solution I found to this day and still work.
  The only drawback that I want to emphasize is that this fix causes completely reset to its default settings of windows search.  Customizations to search what have been done by the user (e.g., windows search indexing user customizations options) will be lost.

  I am running Windows 7 Pro 64-bit and occasionally experienced the same error message ( windows cannot find ': search query = XXX ", where XXX corresponds to my search query) try to search through windows when start menu search box.

  Only recently, however, discovered one other cause possible/fix to this problem.
  Specifically, I discovered that the error of windows search resulting from the ADDITION of a NETWORK LOCATION on the local computer (for example, via the menu option "Add a network location" that appears when you click the file menu in a window of windows Explorer displays the contents of the local computer (corresponding to the "COMPUTER" icon). The CENTER of my computer SYNC settings have been defined to disable the synchronization of network or file 'offline' and I suspect that this setting is also part the cause of the error of research.

  To resolve this problem, simply tell windows search not to include the 'network' location in the search index.  To do this, one needs to access the settings of the windows search INDEX LOCATIONS (via Indexing Options-> change), then uncheck the box next to the network location (which on my computer starts as follows: oneindex: / / {s-1-5-21...)

  After unchecking this box, click on the OK button and then CLOSE the button to exit the Options of Index window.  After that the error message should hopefully not return.  If so, try restarting the computer and research to test again.

  Hope this helps!

  :)

  ~ rx

• Failed to start the computer over HTTP: Error 1000

  I'm testing an upgrade from version 2.9 to 2.10 so I can upgrade our 6.0u2 ESXi hosts to solve the problem of multiple appstacks slow attachment.  However, I get this error on half of my offices.  I tried both 2012R2 and for the administration server 2008R2.  It is installed with local SQL.  Desktop computers are Windows 7, floating pool linked clone.  Looks like that in the beginning it shows a "HttpInitializeRequest: status response 200 Manager (2 bytes) ': OK ' but try again"computer startup on HTTP failed: Error 1000 ".  Once virtualization fails is disabled and no appstacks cling.

  I have logs from two desktop computers, a successful failure:

  In case of failure:

  [19:24:58.937 2016-03-25 UTC] [svservice:P828:T856] OnCreateSession called (CF 000000000036, 50, Params 0000000000F6E840, context 0000000000000000 manage the ID from Session 1)

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (Microsoft format) UUID: F6A62A42-87FE-778B-EA05-F56BBADBCD04

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (VMware format) UUID: 422aa6f6-fe87-8b77-ea05-f56bbadbcd04

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP session

  [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP connection

  [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Shuffing 1 Manager (s)

  [19:25:01.892 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] Seed URL: / pre-startup? name = svservice & to uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA01 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  [19:25:02.347 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] Computer start URL: / computer startup? name = svservice & uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA01 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:30:01.666 2016-03-25 UTC] [svservice:312] WinHttpReceiveResponse the timeout of waiting for response

  [19:30:01.666 2016-03-25 UTC] [svservice:P828:T312] Retrying in 5 seconds (expected 300 seconds on 300 max)

  [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] Abandonment of application HTTP after having exceeded the time limit (300 seconds)

  [19:30:06.662 2016-03-25 UTC] [svservice:312] Failed to start the computer over HTTP: Error 1000

  [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] HttpComputerStartupThread: failure (starting the computer)

  Successful operation:

  [19:24:58.843 2016-03-25 UTC] [svservice:P820:T852] OnCreateSession called (Session ID 1, 00000000003CFB60, Params 0000000000F4E880 0000000000000000 context handle)

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (Microsoft format) UUID: 72F62A42-0EF6-DBCA-0BE1-DF5682A376C5

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (VMware format) UUID: 422af672-f60e-cadb-0be1-df5682a376c5

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP session

  [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP connection

  [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Shuffing 1 Manager (s)

  [19:25:01.265 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] Seed URL: / pre-startup? name = svservice & to uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA02 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  [19:25:02.161 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] Computer start URL: / computer startup? name = svservice & uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA02 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (34 bytes): START COMPANY\AV210TSTPA02$

  [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] HttpComputerStartupThread: managed (starting the computer)

  [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  Just curious, it's someone else is seeing this with 2.10 and if you have, how solve you this problem?

  If you are using some kind of power management on the VDI? It seems as if the machine is unable to reach the HTTP Appvolumes service for any reason any newspaper which shows success connects withion a fraction of a second if the server doesn't seem to be to busy.

  Maybe you try to join an appstack that has some sort of firewall inside rule?

• Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

  I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

  Log name: Application

  Source: Application error

  Date: 21/07/2012 10:40:20

  Event ID: 1005

  Task category: (100)

  Level: error

  Keywords: Classic

  Description:

  Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.

  Program: For the Windows service host process

  File: C:\Windows\System32\wuaueng.dll

  Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.

   

  SOLVED!

  Hello

  Follow these methods.

  Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

  To save the c:\windows\system32\wuaueng.dll file, follow these steps:

  a. click Start, type run.

  b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

  c. When you receive the following message appears, click OK:

  DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

   

   Method 2: If this does not help, you can reset Windows update components and check.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Could not start the Windows Firewall

  De :  Johan

  Hello

  My firewall gives me this error message when I try to put it on.

  "Windows cannot start the Windows Firewall service.

  I just installed SP1, but the problem started before that.

  De :  GTS

   

  Try running this command at a netsh winsock reset command prompt

  Restart, and then try to turn on the firewall.  Recently, it has worked for me during the interview of a machine of customers with the same problem.

  Another response of the community of Windows Vista discussion groups

• How to use the windows fax machine and how to open an administrator account?

  How use the windows fax machine, and how can I open an administrator account?

  Original title: activateadministratoraccount

  Hello

  Thanks for your posting in the Microsoft community

  Well, you can enable the administrator account hidden instead of an account

  You can make the win + r and write lusrmgr.msc in the start search box or in the command run and pressing ENTER. Or, you could open the computer by right clicking on computer management in the start menu and select manage.

  Expand System Tools > local users and groups > users.

  Right-click the administrator account, and then select "Set password".

  In the 'set password' click 'continue '.

  In the "set password" enter the password of the administrator twice, then click on 'Ok '.

  Then, activate the administrator account. Right click on the administrator account and select "Properties".

  n check the box "account is disabled". Click on the Ok"" button.

• Message to the computer startup «failed to start the audio driver of Dolby.» Please restart your computer or reinstall the driver if the problem persists ".

  Original title - help help help me please

  why I opened my computer it appears a message that "failed to start the audio driver of Dolby. Please restart your computer or reinstall the driver if the problem persists ". and I could not open Windows media player. What should I do now? who can help me please?

  Hello

  Go Device Manager... Sound, video and game controllers, and see if you have triangles yellow error next to your audio devices...

  My guess would be that you need to update the drivers for your audio devices.

  You should be able to find the drivers + Support Web site for your computer model...

  If not, find the number\model Audio chip and watch there chip manufacturers website for updates...

  I don't know if the audio problem is a single chip, or is part of your graphics device...

  If you don't find anything wrong in the audio, you can check that.

• How do I start the Windows recovery environment (WinRE)?

  Hello

  I have PLUA1E Satellite Pro U200 - 02802QS with Vista Business 32 - bit and the WinRE partition.
  How do I start the Windows recovery environment (WinRE)?
  I mean what key should I press during the boot process for Windows re menu?

  In my Satellite Pro A300, the F8 key during startup will run the recovery of HARD drive partition.

  Hope it's the same on your.

  Or do you possibly mean the recovery of Vista Business environment. Accessible through the Control Panel, system image recovery?

  / Torbjörn

  Post edited by: ssstsg

• DSC error: IAK_SHARED failed to start the service

  When I try to deploy a shared variable library, she fails to deploy and gives me the following message: error:-1967362042, IAK_SHARED: (Hex 0x8ABC7006) failed to start the service.  I'm using LabVIEW 8.6 with DSC 8.6.  I tried to run one of the examples (the example of the heat exchanger).  Any ideas?  I have LabVIEW 8.5 installed as well (many of my clients are still using it), and I got 8.5 installed DSC.  Shall 8.5 DSC be uninstalled everything first?

  Thank you

  Tom

  Hi Tom,

  This means that your installation is corrupted and some components SQL do not settle down with it. I would advise to uninstall completely and then put it back using the installation CD you have. I hope this helps.

  Gregory C.

• A small flag appears on the bottom of my screen that says activate security service Windows, but when I try to turn on it says could not start the Windows security service

  Original title: HELPPPPP

  My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/

  Hey ChelseaHarris,

  Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
  Could not start the Windows Security Center service.

  If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
  Microsoft safety scanner

  Hope that helps.