Failed to start

Similar Questions

• the application has failed to start because its side by side configuration is incorrect

  I downloaded the new firefox and when I try to open it I get this message that the application has failed to start because its side by side configuration is incorrect

  Seems to be caused by a corrupt installation of Visual C++ (several versions can be installed-by-side).
  
  You can try to use the sxstrace tool to see if you can find which files are missing or damaged.

  • http://www.Vistax64.com/software/245768-side-side-configuration-incorrect.html

• Tecra A9 fails to start because of system file is missing

  Hello
  I bought tecra 1 month and now I can't open my laptop

  It has windows xp pre installed and fails to start windows
  because the file system is missing.
  What can I do?
  I don't have a floppy drive to insert the startup disk
  Help, please!

  Hello

  Why you need a floppy disk?
  As far as I know this laptop has an internal CD/DVD drive.
  I think you simply boot from the Toshiba Recovery CD and must be reinstalled the operating system!

  If all goes well it s not a serious fault because sometimes this seems due to HARD drive failure.
  But like I said above usually the new installation of operating system restore CD for this problem

  Good luck

• Re: Satellite A300 sometimes fails to start

  My Satellite A300 sometimes fails on start when displaying a logo of Toshiba.
  I don't know why. Y at - it a touch to show a p.o.s.t. tests?

  Sorry for my English.

  Hello

  You can change in the BIOS the option to boot from normal to fast.
  I think that this will disable the Red Toshiba log and show you the post screen.
  But to be honest, I don't know if this could be help full.
  In any case, if the laptop is unable to pass on the MESSAGE, something might be wrong on the motherboard; the modules, memory example or similar

• Satellite A500 fails to start

  Hello

  Once in a while (almost once a day), my A500 fails to start.
  When I hit the power button, weird lines appear on the screen immediately, and it seems that there is not a lot of power goes to the processor.
  It will stay like that until I hit the power button to stop it.

  http://img52.imageshack.us/img52/5418/20112010747.jpg

  It seems to start fine if I leave for an arbitrary amount of time before trying again.

  Any thoughts?

  See you soon.

  HM. For me, it looks a bit like a motherboard maybe hardware problem or GPU.
  You are able to access the BIOS?
  Please try this and set the default BIOS.
  In addition, I would recommend setting the notebook back to factory settings to check if an improvement is noticeable.

  But if his equipment really then issues you should get in touch with a local ASP you know

• HAB check failed for start / could not validate the boot image

  Hello

  I have neglected my E bike for a few weeks and when I loaded and it fed today, it shows a menu and:

  HAB check failed to start

  could not validate the boot image

  Tried all the menu items and none of them worked. For me, it's very odd behavior, because BONE is not affected since the last Android 5 update, several months ago.

  Are there opportunities for the device?

  If you can't make an external reset via hardware buttons, then your phone will have to service.

• Satellite P100: HARD drive sometimes fails to start or just not responding

  I have a satellite P100 on xp professional service pack 2. Sometimes it fails to start and appears as if the hard drive just stopped responding, does not require defragmentation.

  Checked all Diagnostics pass, can get it started by selecting the boot options multiple F12, HDD that appears first in the list.

  Although it seems not take a long time.
  Sometimes it seems to stall at the start to the top but picks up then after a few minutes and fortunately sometimes it starts without a problem.

  What is data corrupted in the bios? but then why it starts ok sometimes and not others? It doesn't matter if it's hot or cold.

  any ideas or help greatly received.
  David

  Post edited by: daviddean

  Hello David

  It's a very strange situation, and for me there is no explanation simply. In my opinion the laptop or HARD drive, the functionality must be tested properly. Here in the forum we can speculate just what is the problem here but mobile startup must be tested with the other HARD drive pre-installed with original recovery image.

  It will be interesting to know if the problem disappeared with new HARD drive. So what you can do now? If possible, try to get the second HARD drive and do the only testicles or make a call to the authorized service center and explain the situation. If the laptop is guaranteed to be valid, it will be better to check in service because they can replace free HARD drive (if the HARD disk is defective).

  Sorry, but I don't see another solution. Some test with the new HARD drive can help you to understand if this happens because of the HARD drive. I don't think that the BIOS can be responsible for the issue described.

• Failed to start the test

  I have a hp pavilion g7, Windows 7
  
  Starting tonight, my laptop fails to start and freezes on the "getting started" page view. After several of the recommended options, I ran the test that does not start.
  
  The display screen reads-
  Memory test: past
  Smart check: past
  Dst short: failure
  
  Failure ID: GU6E00 - 63479 L-MFPX01-60TP03
  Product ID: A7A44UANBA
  
  Hard drive 1
  
  Starting test: failed
  
  Where should I go here for this problem?

  Hello

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also compatible with startup problems you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and you want a guide on replacing the hard drive you, please let me know...

  Kind regards

  DP - K

• DSC error: IAK_SHARED failed to start the service

  When I try to deploy a shared variable library, she fails to deploy and gives me the following message: error:-1967362042, IAK_SHARED: (Hex 0x8ABC7006) failed to start the service.  I'm using LabVIEW 8.6 with DSC 8.6.  I tried to run one of the examples (the example of the heat exchanger).  Any ideas?  I have LabVIEW 8.5 installed as well (many of my clients are still using it), and I got 8.5 installed DSC.  Shall 8.5 DSC be uninstalled everything first?

  Thank you

  Tom

  Hi Tom,

  This means that your installation is corrupted and some components SQL do not settle down with it. I would advise to uninstall completely and then put it back using the installation CD you have. I hope this helps.

  Gregory C.

• Windows Update fails because TrustedInstaller fails to start due to bad road cbscore.dll

  I get error 80080005 when you try to run windows update.  I followed this to the fact that the Windows Module Installer fails to start.  Using ProcMon I could find this TrustedInstaller.exe fails to start.  It is a failure due to the following:

  TrustedInstaller.exe QueryOpen C:\Windows\servicing\0.0.0.1\cbscore.dll IO QUICK REJECTED
  TrustedInstaller.exe CreateFile C:\Windows\servicing\0.0.0.1\cbscore.dll path ACCESS not FOUND
  TrustedInstaller.exe QueryOpen C:\Windows\servicing\0.0.0.1\cbscore.dll IO QUICK REJECTED
  TrustedInstaller.exe CreateFile C:\Windows\servicing\0.0.0.1\cbscore.dll path ACCESS not FOUND

  I searched and cbscore.dll is actually under:

  C:\Windows\winsxs\x86_microsoft-Windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_0b4ada54c46c45b0

  I tried to understand where TrustedInstaller.exe gets the path for cbscore.dll, but I had no chance.  Can someone tell me where TrustedInstaller.exe gets this way?  Or, more generally, how can I solve this problem?

  Thank you!

  The McAfee free trial (which is preinstalled on the computer when you bought it) expires before you've bought & installed McAfee Security Center?

  Installed Updates lists the the system update tool... (KB947821)?

  I'm afraid things only left in my neck are (1) performs a thorough check of malware, (2) do a repair installation of Vista or (3) formatting the HARD drive & doing a new installation of Vista. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error: "the application failed to start because its side by side configuration is incorrect."

  Original title: youcam /camera fun zone

  How can I solve the problem / the application has failed to start because its side by side configuration is incorrect is the message that is displayed

  [Moved from comments]

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  1. don't you make changes to the computer before the show?

  2. which version of the operating system is installed on the computer?

  3. when exactly you get this error message?

  You can uninstall all existing Microsoft Visual C++ Redistributable Package on the system and install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.

  Uninstall existing Microsoft Visual C++ Redistributable Package

  Reference:

  http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

  To reinstall the latest Microsoft Visual C++ 2010 Redistributable Package

  Reference:

  Microsoft
  Package redistributable Visual C++ 2010 (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Microsoft
  Package redistributable Visual C++ 2010 (x 64)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Hope this solves the problem.

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Error - the application failed to start because its configuration side by side is not correct when you use Microsoft Safety Scanner

  Original title: microsoft security scanner is Guy accounts.

  It shows the following error - the application has failed to start because its side by side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. can u please help?

  Hello

  You can uninstall all existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ 2010 Redistributable Package and check if it helps.

  Method 1:

  Step 1: To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2: Download and install the latest package and see if it helps.

  Before you download, you can check am I running the 32-bit version or 64-bit Windows?

  For 32 bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 86)

  For 64-bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 64)

  Method 2:

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  In addition, after you fix the problem, you can see step 7 above to restore your computer to a Normal startup mode.

• the application has failed to start because its side-by-side configuration is incorrect for windows live messenger

  Wen I Conect live windows Messenger tray I have this massege and I can't conect to the programe

  the application has failed to start because its side-by-side configuration is incorrect

  Hello Pecky,

  Thanks for visiting the site of the community of Microsoft Windows. The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live Solution Center Messenger Portal community. Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/product.aspx?ProductID=2

  Thank you

• Application has failed to start because its side-by-side configuration is incorrect? Please help me!

  Hello world

  I just got the new Sims 3, I installed and uninstalled several times, but every time I get the same message came 'the Launcher of the sims 3 has stopped working ".
  I checked the updates, defragmentation and tried again but no joy. In addition, the system requirements exceeds the requirements of the game.
  I spoke to someone on the EA forum and they suggested to the launcher and simply load the game, so I tried this and now I get "the application failed to start because its configuration side by side is incorrect. check the log of events applications for more information. »

  In all honesty doesn't mean a lot to me, I tried to get help from EA, but they do not respond, I hope experts can help me, it would be much appreciated.
  EM

  Hello Emma,

  Thank you for posting.  As a gamer, I have an idea of what might happen.  It seems that the configuration file for the game is not correct or may be corrupt.  Unfortunately only EA support for the Sims 3 can really help you with this problem.  I suggest that you stay in control of their forums or contact their support team.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

  Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

  Hello

  I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

  Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

  See how it works for you:

  If you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:

  Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

  You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

  If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

  You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

  Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

  You also will be able to properly run a browser on the system afflicted to go on Internet download one.

  There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

  You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

  If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

  Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

  TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

  Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.