Failed to trigger PXI with DAQmxCfgDigEdgeStartTrig

Similar Questions

• PXI with MXI Exp 8370 1078

  Hi all

  I use chasis 1078 pxi with mxi 8370 exp card. Now the problem I don't seem to understand is that if my computer before running the chasis 1078, NOR Max does not seem to recognize the chassis and all the modules in it? After doing a little research on NEITHER I found the chasis should be on before turning my computer but is there a way around it?

  Second question once everything is started if I plug cables MXI 8370 and Initialized then the matter which card in the hunts using Daqmx CreateChannel (DI or), but it does not give me errors like any communication is made by 8370 MXI. So, how can I detect this comunication with 8370 and chasis error?

  Best regards

  Ali Asad

  The chassis must be powered on before the PC host, so that when the BIOS loads... the PC can find all the material from your system.  In reality, PXI hardware just needs to be on "in time" and not literally "before".  Therefore, if it is difficult to turn on/off the front chassis as the PC, you can configure the SMU-8370 to power on when it detects that the PC is on.  This is done via a utility OR that you find on the link below.

  http://digital.NI.com/public.nsf/allkb/F645F5669E9D4B568625716A007D22DB

  Robert

• recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  Hi mikedav,

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.

  Method 1:

  Follow the instructions in the link below which will help you solve the problem.

  Tips for solving problems with Internet Explorer

  http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx

  Method 2:

  Follow the instructions in the link below to optimize Internet Explorer.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Error blackBerry software - synchronization failed, impossible to deal with organizing data

  I had a Q10 Blackberry last week.  I downloaded and installed the PC of Blackberry link 1.2.2.13 version.  Two-way sync USB worked fine.  Now, all of a sudden, I get the error message "synchronization failed, impossible to deal with organizing data."   I tried to reset the synchronization options, but not joy.  Also tried to uninstall and reinstall the software Link 1.2.2.13, once again no joy.  Any suggestions?

  UPDATE: I spent 4 hours on the phone and the remote session with the help of Blackberry last night.  After doing some troubleshooting to isolate the problem, determined that something on the device caused the problem of Outlook synchronization. One thing I've learned, it's that it can take a long time to synchronize and even though the progress of the screen may appear frozen, let it go until the end - sometimes it took 20-25 minutes, but eventually completed. Here's the process we went through - I would recommend appellant help BB and work with them to make sure you have not accidentally delete Outlook contacts and calendar of important information of your PC or BB device!.

  (1) we tried an uninstall/reinstall the PC Link BB software and that did not fix the problem.

  (2) to isolate the problem of synchronization.  We first did a synchronization of 2 channels 'contacts' and 'calendar' and who was a failure.  Then did a synchronization of only 2 channels 'contacts' and managed.  Then did a synchronization of only 2-way 'calendar' and that was a failure - so the problem was linked to calendar data and something on the device has been the cause of the problem or corrupted.

  (3) link BB allowing us to make a backup complete unit.

  4) then decided to do a 'Wipe security' on the device of BB Q10 to erase all the data and settings and return to a clean boot device configuration.  I was nervous about it - make double sure that Outlook all contacts and calendar data on the device and the PC are completely backed up in case something bad happens.  Nothing serious happened, but I was gald, we made the backup!

  (5) has the 'Security Wipe' feature (on the device, the settings > Security and privacy > wipe security) and phone rebooted without problems (takes a while to do).
  

  (6) then used link BB to do a sync test 1 channel 'contacts and calendar' from PC to device.  It worked without problem.

  (7) we then used BB link do a "restore" full backup of device, as we did in step 3 above.  It takes a while to make and was a success.

  (8) once the restoration of the aircraft was complete, BB link configured to perform a synchronization of 2 channels of the two 'contacts' and 'calendar '.  Does the synchronization and was a success.  Did a test by adding the new entry of the calendar on PC and did another 2-way sync - all worked very well.  Seems that the problem has been corrected, but will follow in the coming days.

  Lessons learned:

  (1) If you have a lot of Outlook contacts and calendar entries, the synchronization may take a long time.  Be patient and let it run - even if it seems stuck, etc!

  (2) save all Outlook data on the device and the PC to make sure that you have a backup something bad happened during troubleshooting.  We had not something bad happens, but I was gald we made a backup anyway.

  (2) call BB help - support person, I worked with was fabulous, even if it took some time to work through a patch.

   

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• I can't uninstall all programs and it says fail to uninstall, even with the cleaner and I don't know how to reinstall

  I can't uninstall all programs and it says fail to uninstall, even with the cleaner and I don't know how to reinstall

  Moving to the cloud creative download & install

  Hello

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena

• Computer memory virtual is increased from 6 to 8 GB and now vm fails to power on with the error massage not enough resources to meet the HA failover, attached screenshot

  Computer memory virtual is increased from 6 to 8 GB and now vm fails to power on with the error massage not enough resources to meet the HA failover, attached screenshot

  The message is usually due to the Admission HA and reservations control configuration memory set on one or more virtual machines. With the default configuration HA calculates the sizes of slot based on the memory and CPU. Any reserve on a virtual machine could increase the size of the slot and lead to fewer available seats. What you can do is either to reduce (or eliminate) reservations about the VM (s) or set admission control to a percentage rather than the host failures tolerated.

  André

• Conversion of physical Windows 7 machine fails during the reconfiguration with converter.fault.FileCreationFault

  Hello

  first of all, thank you for providing tools such as vCenter Converter for free.

  I tried to convert a physical machine to Windows 7 using the current vCenter Converter Standalone (version = 4.3.0 build = build-292238). The target of the conversion is an external USB disk. I am to convert the entire machine, including a disc of about 280 GB in size.

  The conversion takes more than 24 hours, but seems to work quite well. Right after training is converted (to about 98% of the whole process), the conversion fails during the reconfiguration with the following error message:

  Unexpected exception: converter.fault.FileCreationFault

  -ERROR - convert: converter.fault.FileCreationFault

  {(converter.fault.FileCreationFault)

  dynamicType = < unset >

  faultCause = (vmodl. NULL in MethodFault),

  file ="
  .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$ «»

  MSG = ""

  }

  There is no other message log of the recent in the converter - server.log. The converter - worker.log says:

  from reconfiguring the system...

  using temp dir C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig

  ReconfigurationTransaction: cached reviews system volume

  LocalPathToGuestSystemFolder:
  .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\

  LocalUndoFolder:
  .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$

  Cannot create undo file

  Cleaning up the C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig temp directory...

  TaskImpl failed with MethodFault::Exception: converter.fault.FileCreationFault

  Task failed:

  Scheduled timer cancelled, succeeds StopKeepAlive

  Completed task: Task 3

  InternalTask2VmomiTaskAdapter updates, States: 4, percentage: 0, xfer rate (Bps): < unknown >

  Creation of vmx file Analyzer

  BaseParserImpl::Parse Config info is not cached

  F:\VM\wartberg\wartberg.vmx analysis

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  Registry hive
  . \vstor2-mntapi10-shared-468030AD0004C435020000000C000000
  Boot\BCD is responsible under the name mntApi397493888030118019

  Error 13 read the value of the element of key mntApi397493888030118019\Objects\ {9dea862c-5cdd-4e70-acc1-f32b344d4795} \Elements\24000001

  MntApi397493888030118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi398445489630118019

  2 error reading value CSDVersion key mntApi398445489630118019\Microsoft\Windows NT\CurrentVersion

  2 error reading information SP

  CurrentType key is multiprocessor free

  2 error reading CurrentType mntApi398445489630118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value

  2 error reading 64 bits of information, probably not a 64-bit system

  the product name is Windows 7 Home Premium

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi404763500730118019

  Error reading the mntApi404763500730118019\ControlSet001\Services\vmxnet - 2.

  Error 2 vmxnet information, assuming that vmxnet is not installed

  MntApi404763500730118019 hive unloaded

  MntApi398445489630118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi406994304730118019

  MntApi406994304730118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi419224726130118019

  2 error reading value CSDVersion key mntApi419224726130118019\Microsoft\Windows NT\CurrentVersion

  2 error reading information SP

  CurrentType key is multiprocessor free

  2 error reading CurrentType mntApi419224726130118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value

  2 error reading 64 bits of information, probably not a 64-bit system

  the product name is Windows 7 Home Premium

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi425417937030118019

  Error reading the mntApi425417937030118019\ControlSet001\Services\vmxnet - 2.

  Error 2 vmxnet information, assuming that vmxnet is not installed

  MntApi425417937030118019 hive unloaded

  MntApi419224726130118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi427773541230118019

  MntApi427773541230118019 hive unloaded

  Failed to get the volume mount points 640 (03 = * 00 > 7000000000000: 4146 (type = 2, code = 259))

  VMOUNT library: 1450 error communication error with the pilot while

  Error 1016 (hive to load error: unknown error 1016 (0x3f8) (1016)) temporary hive loading
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE under the name of the mntApi367215230118020 key.

  Unable to load the registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE, error 0x3f8.

  Error 16258 when you open the software hive

  Failed to get the volume mount points 640 (03 = * 5320000000:00404, 16258 (type = 2, code = 1016))

  MNTAPI Info OS: Microsoft Windows 7 Home Premium edition: root of home: Windows Service Pack: worm 0: 6.1

  OS resides on the disk partition 2 F:\VM\wartberg\wartberg.vmdk path

  BaseComputerImpl::Open configuration file: F:\VM\wartberg\wartberg.vmx

  WorkerConvertTask: production bundle task agent for task with id = 'task 3 '.

  bundle of newspaper http://Converter.Agent.DiagnosticManagerImpl[task-3] Generating task.

  http://Converter.agent.DiagnosticManagerImpl creation bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."

  http://Converter.agent.DiagnosticManagerImpl adjusted bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."

  WorkerConvertTask: recovery agent special newspaper bundle to "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip".

  http://Converter.agent.DiagnosticManagerImpl recovery bundle of newspaper with key ' task-3 - qfyxaphl.zip "at offset = '0' and max size ="11155.

  WorkerConvertTask: Bundle successfully retrieved from "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip"

  Task failed:

  Scheduled timer cancelled, succeeds StopKeepAlive

  Completed task: task-1

  bundle of newspaper http://Converter.Worker.DiagnosticManagerImpl[task 1] Generating task.

  As the conversion took more than 24 hours, I would be happy to learn how to avoid this problem or even how to save the VM already created (I don't know if this is possible, but at least the virtual machine appears to be underway, but then crashes saying that a required device is not present).

  Any help is appreciated!

  Thank you

  nepper

  OK - I'll upload versions changed in maybe 15 minutes

  muss weg kurz

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Failed: WARNING: execution completed with warning - when compiling

  Hi all
  
  I Googled it before posting here.
  
  One of the packages (package body) become invalid on the diagram of the test after installing the update.
  
  I tried to recompile it:
  
  modify the body of package zoom.pkg_bagrcl_card_pts compilation;
  
  or
  
  dbms_ddl.alter_compile exec ('BODY of PACKAGE', 'zoom', 'pkg_bagrcl_card_pts');
  
  Received the message:
  
  SQL command: package ZOOM. PKG_BAGRCL_CARD_PTS
  Failed: WARNING: execution completed with warning
  ZOOM on the package. Modified PKG_BAGRCL_CARD_PTS.
  
  I tried to see updates in custody help
  
  ALTER session set plsql_warnings = ' ENABLE: ALL ';
  
  But it did not help me.
  
  How can I see in custody?

  Try the all_errors view

  SQL> desc all_errors
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   OWNER                                     NOT NULL VARCHAR2(30)
   NAME                                      NOT NULL VARCHAR2(30)
   TYPE                                               VARCHAR2(12)
   SEQUENCE                                  NOT NULL NUMBER
   LINE                                      NOT NULL NUMBER
   POSITION                                  NOT NULL NUMBER
   TEXT                                      NOT NULL VARCHAR2(4000)
   ATTRIBUTE                                          VARCHAR2(9)
   MESSAGE_NUMBER                                     NUMBER
  

• Deeper debugging on the "deployment operation failed on the agent with an error...".

  I tried to deploy a very simple plugin, a couple of settings with Snmp Fetchlet. Nothing complex.
  
  ILINT pass (although I'm not specifying a file of target.xml as examples and models do not seem to correspond to what expected the DTD), here is the result:
  -bash-3, 00 #... /emctl ilint d 0-i sysman/emd/no_targets.xml m sysman/admin/metadata/my_storage.xml - c sysman/admin/default_collection/my_storage.xml
  Oracle Enterprise Manager 10g Release 10.2.0.1.0
  Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
  Not analysis Instance file target (targets.xml)
  Validate the Collection target sysman/admin/default_collection/my_storage.xml file
  Validating target metadata file sysman/admin/metadata/my_storage.xml...
  Target the sysman/admin/metadata/my_storage.xml successfully validated metadata file
  
  The plug-in is imported into Oracle EM GM 10 5 correctly.
  
  When I try to deploy, I get an 'error '. I go to the screen deployment errors and warnings and that's:
  Deployment operation failed on the agent with an error state
  
  Where can I find some sort of journal or information more deeply in the error state?
  
  Paul

  The preferred credentials you set for the agent where you try deploy it, are the same identifying information for the user who owns this agent install? During the deployment, files that are placed on the agent receive the same permissions and owner as install other files on the agent.

• Unable to trigger pxi-5105 exported signal pxi-4461

  Hello

  I use a chassis PXI-1033 with a PXI-4461 (daq) in slot 2 and 4-PXI-5105 in slots 3-6.  I want to use the 4461 to export a reference trigger signal to of the 5105, but when I try to run my program I get the following error:

  Error-89126 occurred at DAQmx Read (Analog DBL 1Chan 1Samp) .vi:1

  Possible reasons:

  Trigger line asked could not be booked because it is already in use.

  Property: RefTrig.OutputTerm
  Property: RefTrig.Pulse.Polarity
  Target unit: PXI1Slot2

  Task name: _unnamedTask<89>

  The Subvi I use to export the signal is built off an example I found.  At the moment it is only under the scope of my code mode (I'll take care of the datalog part later).  I'm not sure what I'm doing wrong, any help is greatly appreciated.

  Thank you

  John

  Hi John,.

  T Clk select a PXI_Trig lines used to deliver pulses of synchronization between devices.  Since that you configure T - Clk before configuring the signal to destination, the driver doesn't know that you plan to use PXI_Trig0 to export the reference trigger.  I guess that's to select PXI_Trig0 as the line to book the pulse of synchronization.

  I recommend that you try to export the signal to one of the other lines PXI_Trig - this should I hope to correct the problem but keep inform us if it is not.  Thanks for posting and have a great weekend!

  -John

• Bird fails via enet/100 with ELCK on all other attempts

  I use my own code (C/C++) on linux which reads data from a RF Boonton Electronics 4300 running talkmode via a power meter box GPIB-ENET/100.  The first Bird command returns data properly but the second fails, and this trend continues thereafter.  Change in the amount of delay between the orders of Bird does not appear to have any effect.

  Ibsta shows ERR, TIMO, CMPL, and the error seems to be ELCK whenever he fails.  There is only one instrument connected to the box ENET/100 and that a copy of my program interact with it.  My program is multi-threaded, but I keep a mutex on the gpib lock of in the thread making the reading of the instrument.

  I connected one committed GPIB to ENET/100 box and I can only see good handshake and transfers of data from the instrument to the listener at the same frequency that I get good data in the application.

  Using a packet sniffer, I see what I guess it's the error response coming back from the box of ENET/100 on all other Bird attempts.

  Does anyone have an idea what could be the problem?  I would try to run the power meter in another mode where I could ibwrt and get a unique response from the Bird, but I don't think that this mode exists.  Thank you.

  Jim

  So I think I thought a solution to my problem... maybe someone could explain why this works?

  If I execute a command ibtrg before each Bird, I never receive any errors.  What confuses me, is that I thought that the talkmode supported by the instrument does not require an external trigger, but apparently he... half the time.

  BTW, I use older drivers or-488 to the situation above.  I also tried to use reminders ibnotify with 488.2 without success.

  Jim

• The iOS to iPhone 4S 9.3 installation fails during the audit with the message "...". iOS 9.3 failure of verification because you are no longer connected to the Internet"even if the phone is connected.

  Greetings, Installation of iOS 9.3 to my iPhone 4S (model MD234X/A with iOS 9.2.1 (13D15)) fails when checking with the message "...". iOS 9.3 failure of verification because you are no longer connected to the Internet"even if the phone is connected. as I can browse with Safari ok. I tried "Retry" several times, has waited several hours and "Try again" and turned the phone off and then on again then "Retry", all with the same problem! Help, please?

  Hi Bloggsj,

  Thank you for using communities Support from Apple.

  I see that you get an installation error when installing iOS 9.3 OTA.  I suggest that you try following the steps below to download the latest version of the update:

  If you have downloaded iOS 9.3, but you can not install it, you will need to download the update again. First of all, remove the update of your device:

  1. Go to settings > general > storage & use of iCloud. Under storage, click on storage management.
  2. Find iOS 9.3 in the list of applications.
  3. Press on iOS 9.3, then remove the update.

  Now you can go to settings > general > software update and download the latest iOS update.

  If you can't put day to iOS 9.3 on your iPhone 5s or earlier, iPad Air or an earlier version, or iPod touch

  Take care.

• Remote access for PXI with DAQmx

  I have a PXI chassis with a real-time embedded (PXI-8186) controller and some modules DAQ (PXI-6259) x 2. I've been programming this via LabWindows with a kind of client-server of RT - UI thing by using network variables and others. For some applications, it would be enough and more convenient to be able to interact with the PXI hardware directly from a connected PC network DAQ.

  The controller running a VISA server, it seems that I could connect to a remote machine with a kind of viOpen ("visa://pxi.somewhere.com//PXI0::15:INSTR"); ") and then contact a particular data acquisition card. But I can't find any information on the programming of the 6259 in any way other than DAQmx or similar.

  First question then: is the interface PXI - 6259 VISA described anywhere?

  More practical would be to continue to use DAQmx, through something like DAQmxCreateDOChan (taskHandle,"pxi.somewhere.com//Dev1/port0/line0:4",...)

  I found references to what we call 'Remote access appliance', for example:

  http://digital.NI.com/public.nsf/allkb/5CC9792C6CD4A34C862565BC0072D5DF

  that seems to put in place something equivalent, but I don't find it to watch it in MAX:

  Start-> all programs-> National Instruments-> NI - DAQ-> the remote device access server

  and I've seen suggestions that maybe it isn't that for traditional DAQ or only pre 7.0, or in any other way was no longer applicable.

  Second question: "Remote device access" are always and how to I install/activate it on my PXI controller?

  Someone at - it clues as to the foregoing, or any other way to get the same kind of features?

  Thank you

  Mike Schacht

  LANL

  Hello Mike,.

  Remote device access was a feature in NOR-DAQ traditional long just now.  This feature was not worn on OR-DAQmx because the framework it was built on does not really correspond with the need of modern times for network security.

  Unfortunately, there is no functionality you describe by saying to DAQmx.  Currently, this type of control is limited to deploying applications to the target of RT.  While the VISA is used for some parts of the DAQmx interaction, these function calls are not documented.  Someone else on the forums may be able to help if they tried to implement something like this in the past.

  Good luck!

• LyncVDI.exe installation fails on the t610 with WES7

  I tried to install LyncVDI.EXE on a t610 with WES7.

  I have looged on administrator, disabled the filter entry and I just got a message "installation failed."

  Any hint to someone?

  You must ensure that your TEMP folders are not z:\temp.

  z:\Temp is a based RAMdrive folder and the RAMdrive is 32 MB by default.

  You can use a temporary folder on C: (for example, c:\temp), a network of road; a USB key.

  You can temporarily change the folder temp with the following commands in a Command. The EXE window:

  If not exist c:\temp\nul mkdir c:\temp

  Set temp = c:\temp

  the value of the tmp = c:\temp

  [PathToLyncvdi] \lyncvdi.exe

  If you want to use something other than c:\temp, change the commands accordingly.

  [PathToLyncVDI] should be replaced with its actual path.

  Tell me if it worked for you