Failure of a file registry - A32 Satellite running on Microsoft Windows XP

Similar Questions

• Trying to access Windows XP on a Mac, receive stop error. failure of a file registry c000218 registry cannot load the hive (file)

  I have a Mac OSX, leopard, parallel 5 and Windows xp.   When I try to access Windows, either through boot camp or at the same time, I get the error message "stop. failure of a file registry c000218 registry cannot load the hive (file).  I bought Windows 7 but cannot get Windows Installer.

  The hard drive may be replaced . Or something is not compatible

• Can I run the Microsoft Windows Malicious Software Removal Tool w / Kaspersky AntiVirus with/without any problems?

  Can I run the Microsoft Windows Malicious Software Removal Tool w / Kaspersky AntiVirus with/without any problems?

  Can I run the Microsoft Windows Malicious Software Removal Tool w / Kaspersky AntiVirus with/without any problems?

  Yes.  It is a tool on demand and not in real time thus creates no problems or conflicts with the other application in real time, including Kaspersky Antivirus.

• STOP: failure of a file registry c000018

  Original title: help please... You will need to fix... Not my computer

  what I do with the error STOP: failure of a registry c000018 file? It won't let me load mode without failure or 19.ne last known good configuration.

  Do you mean C0000218?

  See http://msdn.microsoft.com/en-us/library/ff560172(v=VS.85).aspx

• How an analysis of a file downloaded before you run using Microsoft essentials

  I download a file in the downloads folder and want to scan it to ensure that it is free of viruses before I RUN it. Can and how do this?

  It should already have been digitized at the stage of download - but if you want to scan it again, right-click on the file and select "Scan with MSE.

• How to find a way to open and run the Microsoft Windows tool remover malware?

  I downloaded it from microsoft, they give no instructions to use it.. ??? HELP AS SOON AS POSSIBLE PLEASE

  Double click on the download save or right click on it, then "Run as Admin" > next > next > what type of analysis you want to make your choice:

  1. quick Scan

  2 full Scan (may take several hours)

  3. Custom Scan

  Then do the scan.

  See you soon.

• Run the Microsoft Windows Cleanup Utiliy tool and can only install Silverlight to 0.04 MB why?

  In addition to running Windows cleanup Utility Tool I uninstalled Silverlight, or at least mb of 0.04 that it is installed at the end of all the other steps to remove all these Silverlight. I'd like to get this done because I'm really not completely restore my complete system that I'm disabled and watching movies is more often what I do > PEASE HELP!

  Hello

  ·         What operating system is installed on your computer?

  ·         You have uninstalled silverlight completely?

  ·         Why do you want to uninstall silverlight?

  If you have any question uninstalling silverlight. I would suggest to run fix the link and check if the problem persists:

  http://blogs.msdn.com/b/rpomeroy/archive/2008/06/10/how-to-manually-clean-up-a-bad-Silverlight-installation.aspx

  If the problem persists, you may contact support for Silverlight to get help:

  http://support.Microsoft.com/common/international.aspx?rdpath=1&Gprid=12929

• 1.4 ore can run on the Windows Server operating systems?

  We plan to install Oracle 12 c on Windows 2012 64 bit, with ore 1.4 operating system.

  I checked the condition sine qua non of 12 c, it runs on Windows, 2012 but for ore, it was mentioned that it is running on Microsoft Windows XP, Vista or Windows 7 64-bit only.

  We also plan to install Oracle Big Data Connectors after this installation.

  Can anyone confirm what operating system that we should finally install?

  2012 Windows Server 64-bit is not yet a than oracle Enterprise R supported platform, but we invite you to try.  See the Big Data connectors User Guide for supported platforms.

  Sherry

• Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated

  Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated. Tried all posisible boots and no joy, continues to turn it back on! Frustration...

  Hey James,.

  I does no change, I didn't download a document from my email (from a sender of confidence). I tried to start in safe mode, just, it restarts and goes back to the corrupted checksum display... Last known good config was the same result! The only error message is one that is in the title of this post, not others. Another detail, that I forgot to add is that it does not get insofar as a logo windows before it fails, just the toshiba start screen, then either passes the corrupt message checksum or a blue screen and restarts before I can read the text on the blue screen. Thanks for your response! Any additional help would be excellent if you can. In the meantime, I'll try your methods. Thanks again
  OK, I have now managed a Startup Repair trying over and over again. Restore all settings and now looks very good, thanks for your help!

• Failure of a file error message registry

  I have a Dell Dimension 5150 (Windows XP) that until recently was working fine.   When you turn on now I get the following error message:

  STOP: c0000218 (registry file failure).  The file of registry cannot load the hive (file): \systemRoot\System32\config\SOFTWARE or its log or replacing.   It is damaged, missing, or not accessible in writing.   Beginning physical memory dump.  Total physical memory dump.  For more assistance, contact your system administrator or technical support group.

  Can you help / tell me what I need to do.  I'm not particularly computer literate so feel free to give me an idiots guide.

  Thank you

  I have a Dell Dimension 5150 (Windows XP) that until recently was working fine.   When you turn on now I get the following error message:

  STOP: c0000218 (registry file failure).  The file of registry cannot load the hive (file): \systemRoot\System32\config\SOFTWARE or its log or replacing.   It is damaged, missing, or not accessible in writing.   Beginning physical memory dump.  Total physical memory dump.  For more assistance, contact your system administrator or technical support group.

  Can you help / tell me what I need to do.  I'm not particularly computer literate so feel free to give me an idiots guide.

  Thank you

  Hey markandamanda

  I'm sorry, but these are vista forums

  help for the best possible try reposting in the Sub forum of repair xp

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads?filter=AllTypes

  Walter, the time zone traveller

• C0000218 failure of a file record

  Here is the message I keep getting. I'm trying to fix my dad's computer and have had no luck. I tried to use the restore disk, and the computer does not start. I tried using F8 and it will not draw the menu, so I can restore last known good configuration. I'm really confused at this point. If someone could help me I would be very happy! I'm not a computer genius, so please be patient. Thank you very much. The operating system is Vista Basic and I think it's 2 GB memory...? Dell Inspiron 1525. Sorry I don't have a lot of details... but I don't know a lot about computers.

  c0000218 Registry file failure
  Registry cannot load the hive (file)
  SystemRoot System 32 config system or its log or alternation
  corrupt absent not writable

  Hello travislwilburn,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try following the steps in this article:

  This is one of the main reasons that I prefer to do a clean install from CD, rather than just do a system restore. There is less chance that something can go wrong with a clean install. Unfortunately, many computer manufacturers no longer provide a complete CD, but you can always be able to completely erase your disk rather than using the restore option. Stop: c0000218 error is usually associated with one of several things, depending on how far through the recovery process, as you did before you encounter the error.

  The first possibility is simply the corruption in the Windows registry. A second option is a component of your hardware is not compatible with Windows XP or your hard drive has some kind of issue. Because you re - install Windows XP by using the system restore, it seems unlikely that the system hardware is not compatible, even if I will not rule out the possibility altogether. The third possibility, a hard drive damaged, is possible, even if the windows appeared to run smoothly before your relocation. Before you throw in the towel, we'll take look at nearly every opportunity

  Assuming that the Windows registry is simply corrupted, the first thing to try is a recovery via the automated recovery system for your particular installation. As you try to do a system restore, it is possible for you already tried this and had it fail. If this isn't the case, follow the detailed instructions in the Microsoft article 307545 Knowledge Base.

  If you tried your system restore using the provided OEM or CD restore partition and received this error, make sure that you do not have the connected hardware components that were not part of the initial version on your computer. System restore disks look for specific hardware components. Is he missing the original components it sometimes introduces errors in the process of restoration.

  A third possibility is that the hard drive is damaged in any way. Many disks have bad sectors and you will not know about them until you try to write on the sectors in a specific operation. If you can boot from your installation CD, you will be presented with the option to repair or recover the Windows XP installation. By pressing R lance the Microsoft Recovery Console which then asks the administrator password. After entering the password, run the chkdsk command to check the disk for errors by typing chkdsk/r to the command line. If chkdsk finds errors, you may need to use chkdsk /f to fix the errors before continuing.

  As you attempt to restore your Windows installation, return to the base line, the best solution is to make a completely new install because it will prevent any potential corruption that already exist in your current installation by installing a new copy of Windows instead of reusing existing kernel components that can now be altered.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible to have full control for all users in the directory/files/registry?

  Can I have a lot of control (read, write, change) my specific file / registry for all users, you have any program or script for this reason?

  as 'cacls '. Because I can't use cacls.

  is it wrong?

  C:\>Cacls "program * Files\NETAS" / c/r users: «F»»»

  Displays or modifies access control (ACL) of the files lists

  CACLS filename [/ t] [/ e] [/ c] [/G user: permission] [/R user [...]]
  [/P user: permission [...]] [/D user [...]]
  the ACL file name.
  / T changes ACLs of files specified in
  the current directory and all its subdirectories.
  /E Edit ACL instead of replace it.
  /C continue on access denied errors.
  /G user: permission Grant specified user access rights.
  Perm can be: R read
  W write
  C change (write)
  F full control
  ...

  Perhaps you could elaborate a little bit on "this command is not running"...  What happens when you try?

  I'm not knowledgeable about Windows 7, but Windows XP, I found the registry permissions must be put in a file.  So in your example, you can create a file named "z.txt", and in this file, you put the line:
  [1 5 7 17] \registry\Machine\Software
  Then call you the command line:
  Regini z.txt

  HTH,
  JW

• After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista

  After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing.  It is on a Toshiba Satellite running Vista

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ------------------------------------------------------------------------------------------

  If no joy, see Toshiba Support and/or their forums:

  Toshiba support and drivers
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Support Forums
  http://laptopforums.Toshiba.com/

  Contact Toshiba
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• Cannot copy the files in my Satellite Pro A210

  I recently removed some files from my satellite pro A210 (don't know if this is related to my problem). I have a Samsung digital camera - when I try to upload photos directly connecting the camera to the laptop, I get an error message that says "cannot read file '-if I remove the card and put it in the holder of the card on the laptop I get nothing. Any help would be appreciated...

  John

  What operating system do you use? Have you full access to the yout phone using the usb connection?

• Satellite A205-S4707 - cannot run camera on Windows 7

  Hi all!

  I have Toshiba Satellite a205 s4707, with Windows 7.

  It has the latest drivers Toshiba bios is after update, but I can't launch the camera. I tried everything I found on the internet but not worked for me.
  I tried to install a different software (not later), reinstall, update...

  I GIVE UP!

  Pls help someone! Show me that there is another way that it will run my camera!

  I have the driver installed, but in Device Manager, I have warning with "Chicony USB 2.0 Camera" - code 10.

  Help! PLS!

  Hey,.

  Error code 10 in Device Manager means usually only it s a driver problem...

  Which Toshiba page you downloaded the latest webcam driver?
  Using Windows 7 32-bit or 64-bit?

  In your case, I would like to delete the current version of the software of the webcam. Then restart your computer and install the latest version of it.