Failure of action in Ps cc 2015

Similar Questions

• Please help me! How to load actions in Ps CC 2015?

  I have stock to load in 2015 CC Ps, but I don't know how to do it. I tried and the same way that I used to load each time with older versions.

  Just drag your actions from the office or else on the Panel actions and possibly save the folder actions

  Terri S

• 10.11.5 install impossible to complete failure to restart on MBP early 2015

  MBP early 2015 with OS X 10.11.4

  Started the 10.11.5 update, it freezes during the restart of the installation phase. You leave by using ctrl-cmd-eject

  After that restart attempts to restart the installation ends in the same way, Frost during the restart process

  Tried to do a complete reinstall of a new USB - similar results.

  Return to 10.11 - stop/restart still suspended

  I suspect some updates of the firmware included in 10.11.5 could be the cause

  If you have a backup, start on recovery Volume (command - R on a restart, or hold down the option/Alt during a restart and select the Volume of recovery). Run disk utility, then select first aid. Reformat the hard disk using Disk Utility/Erase Mac OS extended (journaled), then click on the Option button and select GUID. Then re-install the operating system. Try the update by using the update from the drop-down list. Restore your data.

  OS X recovery

  OS X recovery (2)

  10.11.5 combo update

• Failure to export PDF in InDesign 2015

  I have problems with a document export single pages in PDF format. I read here where it might be related question from the record and instead, I took and integrated file and tried this and have even tried it with a different image. I still get the error. Any suggestions? Any help is appreciated.

  Screens below error:

  

  

  PDF settings below

  

  Figured it out. It seems that the reader of my file is stored in was still bound, but was grey out for some reason any. I got it export after I restarted again.

• What versions of ch & PS elements are actions created in 2015 of CC PS compatible with?

  When I create actions in Photoshop CC 2015 - can someone tell me (or is there a way to know) what are the versions of Photoshop and Photoshop Elements, these actions will be compatible with?

  I doubt that your actions would work in Photoshop elements, because it is a totally different program. As in standard Photoshop, it all depends on your actions, and whether they include only in 2015. Some might work, many will probably fail.

• IAM-2050243: process Orchestration with the id 498509, failed with the IAM-3051103 error message: failed to create operation on the entity user at the point of action

  Hello

  While creating a use to the IOM, I get the error below. I have to configure?

  oracle.iam.ui.platform.exception.OIMRuntimeException: IAM-2050243: process of Orchestration with the id 498509, failed with the IAM-3051103 error message: failed to create operation on the entity user at the point of action

  Error log file:

  ]]

  [2015 07-28 T 12: 53:51.674 - 07:00] [oimext_server1] [NOTIFICATION] [] [oracle.iam.identity.usermgmt.impl.handlers.base] [tid: [ASSETS].] [' ExecuteThread: ' 74 ' for queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [ecid: 77744a889dde03de:77dc1a7d:14ec20555f9:-8000-000000000099b7c8, 0] [APP: IOM #11.1.2.0.0] [IDDM: 0000KvMCNcVEoIs6wjyWMG1Lgf5y00000k] compensate the method called in a process of running User Manager CREATE with process Id 498 509 and Event Id 3 306 663

  [2015 07-28 T 12: 53:51.703 - 07:00] [oimext_server1] [NOTIFICATION] [LIBOVD-20043] [oracle.ods.virtualization.accesslog] [tid: [ASSETS].] [' ExecuteThread: ' 74 ' for queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 77744a889dde03de:77dc1a7d:14ec20555f9:-8000-000000000099b7c8, 0] [APP: IOM #11.1.2.0.0] [IDDM: 0000KvMCNcVEoIs6wjyWMG1Lgf5y00000k] conn = op 78 = basic 207 SRCH = scope = base filter = objectclass = * requestedAttributes = [] sizelimit = 0 timelimit = 0 typesOnly = false

  [2015 07-28 T 12: 53:51.703 - 07:00] [oimext_server1] [NOTIFICATION] [LIBOVD-20044] [oracle.ods.virtualization.accesslog] [tid: [ASSETS].] [' ExecuteThread: ' 74 ' for queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 77744a889dde03de:77dc1a7d:14ec20555f9:-8000-000000000099b7c8, 0] [APP: IOM #11.1.2.0.0] [IDDM: 0000KvMCNcVEoIs6wjyWMG1Lgf5y00000k] conn = op 78 = 207 RESULT err = 0 tag = 0 nentries = 1 etime = 0 = 0 mem = 2, 058, 395 728 dbtime / 4294967296

  [2015 07-28 T 12: 53:51.703 - 07:00] [oimext_server1] [NOTIFICATION] [LIBOVD-20043] [oracle.ods.virtualization.accesslog] [tid: [ASSETS].] [' ExecuteThread: ' 74 ' for queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 77744a889dde03de:77dc1a7d:14ec20555f9:-8000-000000000099b7c8, 0] [APP: IOM #11.1.2.0.0] [IDDM: 0000KvMCNcVEoIs6wjyWMG1Lgf5y00000k] conn = op 78 = basic 208 SRCH = scope = base filter = objectclass = * = sizelimit timelimit [] = 0 requestedAttributes = 0 typesOnly = false

  [2015 07-28 T 12: 53:51.703 - 07:00] [oimext_server1] [NOTIFICATION] [LIBOVD-20044] [oracle.ods.virtualization.accesslog] [tid: [ASSETS].] [' ExecuteThread: ' 74 ' for queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 77744a889dde03de:77dc1a7d:14ec20555f9:-8000-000000000099b7c8, 0] [APP: IOM #11.1.2.0.0] [IDDM: 0000KvMCNcVEoIs6wjyWMG1Lgf5y00000k] conn = op 78 = 208 RESULT err = 0 tag = 0 nentries = 1 etime = 0 = 0 mem = 2, 058, 395 728 dbtime / 4294967296

  [2015 07-28 T 12: 53:51.703 - 07:00] [oimext_server1] [NOTIFICATION] [LIBOVD-20043] [oracle.ods.virtualization.accesslog] [tid: [ASSETS].] [' ExecuteThread: ' 74 ' for queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 77744a889dde03de:77dc1a7d:14ec20555f9:-8000-000000000099b7c8, 0] [APP: IOM #11.1.2.0.0] [IDDM: 0000KvMCNcVEoIs6wjyWMG1Lgf5y00000k] conn = op 78 = base 209 SRCH = xxxxxxxxxx, dc = net scope = filter sub = orclguid = 56ca2d28625f47819064b8241ab44539 requestedAttributes = [orclguid] = 0 = 0 = false typesOnly timelimit sizelimit

  [2015 07-28 T 12: 53:51.705 - 07:00] [oimext_server1] [NOTIFICATION] [LIBOVD-20044] [oracle.ods.virtualization.accesslog] [tid: [ASSETS].] [' ExecuteThread: ' 74 ' for queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 77744a889dde03de:77dc1a7d:14ec20555f9:-8000-000000000099b7c8, 0] [APP: IOM #11.1.2.0.0] [IDDM: 0000KvMCNcVEoIs6wjyWMG1Lgf5y00000k] conn = op 78 = 209 RESULT err = 0 tag = 0 = 1 = 2 = 0 = 2 mem dbtime etime nentries, 058, 395 728 / 4294967296

  [2015 07-28 T 12: 53:51.705 - 07:00] [oimext_server1] [NOTIFICATION] [LIBOVD-20040] [oracle.ods.virtualization.accesslog] [tid: [ASSETS].] [' ExecuteThread: ' 74 ' for queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [ecid: 77744a889dde03de:77dc1a7d:14ec20555f9:-8000-000000000099b7c8, 0] [APP: IOM #11.1.2.0.0] [IDDM: 0000KvMCNcVEoIs6wjyWMG1Lgf5y00000k] conn = op 78 = 210 DEL dn = cn = afdada, cn = users, xxxxxxxxxx, dc is net

  [2015 07-28 T 12: 53:51.709 - 07:00] [oimext_server1] [NOTIFICATION] [LIBOVD-20039] [oracle.ods.virtualization.accesslog] [tid: [ASSETS].] [' ExecuteThread: ' 74 ' for queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 77744a889dde03de:77dc1a7d:14ec20555f9:-8000-000000000099b7c8, 0] [APP: IOM #11.1.2.0.0] [IDDM: 0000KvMCNcVEoIs6wjyWMG1Lgf5y00000k] conn = op 78 = 210 RESULT tag = 0 = 0 = 4 etime nentries err = 0

  [2015 07-28 T 12: 53:51.723 - 07:00] [oimext_server1] [NOTIFICATION] [] [oracle.iam.identity.usermgmt.impl.handlers.custom] [tid: [ASSETS].] [' ExecuteThread: ' 74 ' for queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [ecid: 77744a889dde03de:77dc1a7d:14ec20555f9:-8000-000000000099b7c8, 0] [APP: IOM #11.1.2.0.0] [IDDM: 0000KvMCNcVEoIs6wjyWMG1Lgf5y00000k] compensate the method called in a process of running User Manager CREATE with process Id 498 509 and Event Id 3 658 306

  [2015 07-28 T 12: 53:51.763 - 07:00] [oimext_server1] [NOTIFICATION] [] [oracle.iam.platform.kernel.impl] [tid: [ASSETS].] [' ExecuteThread: ' 74 ' for queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 77744a889dde03de:77dc1a7d:14ec20555f9:-8000-000000000099b7c8, 0] [APP: IOM #11.1.2.0.0] [IDDM: 0000KvMCNcVEoIs6wjyWMG1Lgf5y00000k] completed the orchestration with the result of the action - oracle.iam.platform.kernel.EventFailedException: IAM-3051103: failure of the create operation on the entity user at the point of action. :

  [2015 07-28 T 12: 53:51.775 - 07:00] [oimext_server1] [ERROR] [] [oracle.iam.request.impl] [tid: [ASSETS].] [' ExecuteThread: ' 74 ' for queue: "(self-adjusting) weblogic.kernel.Default"] [username: xelsysadm] [ecid: 77744a889dde03de:77dc1a7d:14ec20555f9:-8000-000000000099b7c8, 0] [APP: IOM #11.1.2.0.0] [IDDM: 0000KvMCNcVEoIs6wjyWMG1Lgf5y00000k] Orchestration process with id 498509, failed with the IAM-3051103 error message: failed to create operation on the entity user at the point of action. :.

  [2015 07-28 T 12: 53:51.784 - 07:00] [oimext_server1] [WARNING] [] [oracle.adf.controller.faces.lifecycle.Utils] [tid: [ASSETS].] [' ExecuteThread: ' 74 ' for queue: "(self-adjusting) weblogic.kernel.Default"] [userId: xelsysadm] [ecid: 77744a889dde03de:77dc1a7d:14ec20555f9:-8000-000000000099b7c8, 0] [APP: oracle.iam.console.identity.self-service.ear #V2.0] [IDDM: 0000KvMCNcVEoIs6wjyWMG1Lgf5y00000k] ADF: adding the following JSF error message: IAM-2050243: Orchestration process with id 498509, failed with the IAM-3051103 error message: failed to create operation on the entity user at the stage of the action... [[

  oracle.iam.ui.platform.exception.OIMRuntimeException: IAM-2050243: process of Orchestration with the id 498509, failed with the IAM-3051103 error message: failed to create operation on the entity user at the stage of the action...

  at oracle.iam.ui.platform.exception.OIMErrorHandler.reportServiceException(OIMErrorHandler.java:171)

  at oracle.iam.ui.platform.exception.OIMErrorHandler.reportException(OIMErrorHandler.java:65)

  at oracle.adf.model.binding.DCDataControl.reportException(DCDataControl.java:411)

  at oracle.adf.model.binding.DCBindingContainer.reportException(DCBindingContainer.java:424)

  at oracle.adf.model.binding.DCBindingContainer.reportException(DCBindingContainer.java:479)

  at oracle.adf.model.binding.DCControlBinding.reportException(DCControlBinding.java:201)

  at oracle.jbo.uicli.binding.JUCtrlActionBinding.reportException(JUCtrlActionBinding.java:2036)

  at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1680)

  at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2150)

  at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:760)

  at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:407)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:252)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:210)

  at oracle.iam.ui.platform.utils.FacesUtils.executeOperationBinding(FacesUtils.java:169)

  at oracle.iam.ui.platform.utils.FacesUtils.executeOperationBindingFromActionListener(FacesUtils.java:116)

  at oracle.iam.ui.catalog.view.backing.CartReqBean.submit(CartReqBean.java:980)

  at oracle.iam.ui.catalog.view.backing.CartReqBean.submitActionListener(CartReqBean.java:919)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at com.sun.el.parser.AstValue.invoke(AstValue.java:187)

  at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297)

  at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)

  at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1490)

  at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)

  at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:181)

  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:104)

  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:93)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:371)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:97)

  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:98)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1086)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:434)

  at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:207)

  at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.help.web.rich.OHWFilter.doFilter (unknown Source)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:117)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

  at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

  to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)

  at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)

  at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.iam.ui.platform.servletfilter.IdentityContextFilter.doFilter(IdentityContextFilter.java:50)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.iam.platform.servletfilter.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:164)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:175)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.bpel.services.workflow.client.worklist.util.DisableUrlSessionFilter.doFilter(DisableUrlSessionFilter.java:70)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:418)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.security.am.agent.wls.filters.OAMServletAuthenticationFilter.doFilter(OAMServletAuthenticationFilter.java:265)

  at oracle.security.am.agent.wls.filters.OAMValidationSystemFilter.doFilter(OAMValidationSystemFilter.java:133)

  at oracle.security.wls.oamagent.OAMAgentWrapperFilter.doFilter(OAMAgentWrapperFilter.java:120)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1485)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Thank you

  As IOM tablespace maxed out, we were receving a lot of mistakes. It was one of them.

  Thank you Anne for your contributions.

• E-mail to notify the hardware failure

  I install Assistant8.2 to the mail administrator for the detection of Dell PowerEdge server hardware failures. Actions and filters have been well settled according to the ITA user's guide.  In order to check whether the filters and actions were fine, I removed the power supply by unplugging, but I have not receive alert emails or see any newspaper in "Alert logs."  However, I can check the status of failure of the "Détails" view under the SNMP\baseboardGroup\eventlogTable path and material logs.  Is this due to no corresponding item in the categories/Sources(Alert Categories)?  If so, how to add a new Source alert SNMP or is it possible to trigger the filter with the journal of the EMS?  Your answer will be greatly appreciated.

  
  

• How can I import the filter oil pailt in ps cc 2015.

  I need filter oil paint in certain actions. But in 2015 cc filter is not available.

  Emiel cordially

  You must upgrade to the latest version Photoshop

  Adobe Photoshop Version: 2015.1.2 20160113.r.355 2016/01 / 13:23:59:59 CL 1059143 x 64

  It should be under filter - Stylize option. If the oil painting is grayed out, in your preferences under the processor performance graph avancΘs that OpenCl is checked. If that is grayed out then your graphics card does not support OpenCl and you will not be able to run the oil paint filter without updating your graphics hardware.

  Hope that helps

  Terri

• How to export my 'action' in photoshop cc2015 to another computer (PC) with the same version of photoshop?

  Hello

  I have a prob with my pc on w10, I want to reset it and I ask how to export my 'action' in photoshop cc 2015 to my new installation of the w10

  Maybe my screening are saved in the cloud, but I do not know...

  could you please answer me before as I have format my drive C: / and I porecess to the new facility.

  Thanks

  Hi nicolasp,

  Follow the steps below to record your actions:

  • Open Photoshop and go to the window actions
  • Select an action and click on the drop down at the top right and choose Save Action > select the location to be saved
  • You will need to perform the same step for all the actions that you have

  

  If your shares are purchased, they must be registered the slot location. You should check here:

  C:\Program Files\ADOBE\Adobe Photoshop 2015\Presets\Actions CC

  Kind regards

  Claes

• SpeedGrade CC 2015.0.1 is slow, train and devours RAM

  I'm on a Mac running Mac OS X 10.10.5. Each action in SpeedGrade CC 2015.0.1 (Build 9.0.1x21), when coloring a .prproj registered on first Pro CC 2015.0.1 (version 9.0.1 (36)) and open SpeedGrade, is slow and late makes it extremely frustrating and time consuming to use (for example, I'm trying to adjust the gain, but it does not seem to move and then all of a sudden moves a lot a few seconds later).

  I am currently working with images from a film camera BlackMagic 4 k in ProRes. Footage was recorded through prelude CC 2015.0. I had the same problem when working with 720 p, 1080 p, 2 k, 4 k images.

  He also seems to be a memory leak which causes each action to eat a little extra RAM until it uses all the 32GB after awhile. I have done my best to work with it by raising the program frequently.

  Is it fixed for this?

  Best,

  Jan

  Material:

  -Mac Pro (end 2013)

  -3.70 GHz Quad-Core Intel Xeon E5

  -32 GB 1866 MHz DDR3 ECC

  -AMD over-pants D300

  The leak memory on the Mac is always there... and pointed, while they would work on an update of the bug. They made no announcement to expect something. The last update at least rid the leak memory in Windows... it was a linear ramp faster up to max memory just let it sit idly same. I think that this update may have had a little help on the flight memory of Mac, but not a Mac in the House to test, so I'm not sure.

  ESPECIALLY working images 4 k, the 2014.2 release probably would give you better performance, with realism. You must use the project from the build 2014.2 equivalent of PrPro, of course. There are a number works still mainly 2014.2 while you wait for 2015 to become a better platform performance and get stable. The best job for 4 k in Sg would actually "native" mode, using created projects in Sg or coming in through EDL. However... SG is picky as all get out more on 'matching' EDL & media, so that the broken for most. I used to NOD to the Sg from time to time for some things... some things ranking heavyweights in Sg is so much faster in native mode. Unfortunately... is not really an option for me, if I know that some are still able to EDL in Sg and work that way.

  Neil

• where the actions are stored in windows

  Okay, this has been driving me crazy since cc came out. I'd love to sit down with a programmer of adobe and to make him understand.

  According to what I read in these forums and other resources. Any time you load/save a brush, actions, style etc stores PS languages in the appropriate in the presets directory. I just loaded 20 actions in PS C 2015 and my actions directory is empty, even if I close and reopen PS, the action is in the list and works but it is nowhere on my hard drive. Any ideas? Please, because I want to copy the directory place to and external care.

  C:\Users\Steven\AppData\Roaming\Adobe\Adobe Photoshop CC 2015\Presets\Actions

  I know that you know your way around PS, but just to confirm, there are predefined settings that you saved and came a dialog box for you not only name the preset, but also indicate the predefined location?  As an action defined in the drop-down palette actions, either by the Manager of the pre-selection of savings? Have you tried to save a new and see where it was recorded as you saved it, and then search for then?

• Drop Shadow problem with Photoshop CC 2015

  When I batch process drop shadow actions using Photoshop CC 2015, the decline in the shadows seem to completely mess up on some images, either hardly appear or enlarge much too big.

  All images are 184 x 184 with canvas 192 x 192, the installation program the shadow effect to use the available space.  And I even returned to CS6 using for now which works very well and CC 2014 worked very well, it happens only in CC 2015.

  What is even more strange, I have manually scroll actions step by step until I get to the drop shadow error, and if I double click on the action of the shadow, it applies perfectly well. But then, when I come back and perform the action it always creates the wrong shade.

  In my view, there is a known bug with the layer effects not putting the correct numbers in situations where you copy and paste the layer styles and executing actions, as you do. If all goes well there will be a fix soon.

• Set the failure message on the display of the results of the second attempt

  Hello

  I have put 2 attempts for the quiz of all and to customize the message of failure for the second attempt failed such as:

  • On the first attempt failed, the message reads: sorry! You can't pass this time. Resume the quiz.
  • On the second and last attempt should read the message: sorry! You do not have. Please review the course.

  I know that I can put a message of failure Quiz Préférences > settings > Quiz result Messages > Message Fail. But I can put more than one failure message (the first one) and one of the last attempt in Captivate 5.5?

  Please let me know.

  Welcome to the forum,

  Try to change the number of levels of failure (accordion Action) from 1 to 2. You will get two legends of failure in this case, you will be able to change.

  BTW, it's a good idea to mention the version of CP you use (detailed, because there is a difference between 6.01 and 6.1). Sorry, did not read you use 5.5

  Here, still too early. My workflow is to issue level, not on Quiz level. To change the legend of failure then, I don't see an easy workflow immediately. Stocks advanced and custom issues, it is certainly possible, but with test blades by default, you don't have much control over the objects on this slide of quiz.

  http://blog.lilybiri.com/question-question-slides-in-Captivate

  Lilybiri

• My iMac is slow.

  I'm on El Capitan 10.4.11.

  Heres a little EtreCheck, I ran a minute or two ago. There are a lot of red...

  Thanks for your help.

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-05-05 21:14:48

  Download EtreCheck from https://etrecheck.com

  Time 03:17

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click [delete] to remove the adware.

  Problem: Computer is too slow

  Hardware Information: ⓘ

  iMac (27-inch, mid 2010)

  [Data sheet] - [User Guide] - [warranty & Service]

  iMac - model: iMac11, 3

  1 3.2 GHz Intel Core i3 processor: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  Vacuum

  BANK 1/DIMM1

  Vacuum

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  ATI Radeon HD 5670 - VRAM: 512 MB

  iMac 2560 x 1440

  Software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

  Disc information: ⓘ

  ST31000528AS disk0: (1 TB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 999,35 go-go (583,77 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  PIONEER DVD - RW DVRTS09)

  USB information: ⓘ

  Seagate Backup + SL 1 TB Mac

  EFI (disk3s1) < not mounted >: 210 MB

  Time machine (disk3s2) / Volumes/Time machine: 999,86 (Go 184,12 free)

  Computer, Inc. Apple IR receiver.

  Built-in ISight from Apple Inc..

  LaCie P 9223 Mobile Drive 1 TB

  Volumes/LACIE LACIE ACTIONS (disk2s1): 190,04 (Go 94,11 free)

  My schedule (disk2s2) / Volumes/My Appendix: 810,17 go-go (432,66 free)

  Seagate Expansion Desk 4TB

  disk1s1 (disk1s1) < not mounted >: 134 MB

  Exp of Volumes/Seagate Seagate Exp (disk1s2): 4.00 (3.66 free) tuberculosis

  Card reader Apple

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Guardian: ⓘ

  Any where

  Adware: ⓘ

  ~/Library/LaunchAgents/com.jdibackup.JustCloud.autostart.plist

  ~/Library/LaunchAgents/com.jdibackup.JustCloud.backupstart.plist

  ~/Library/LaunchAgents/com.jdibackup.JustCloud.notify.plist

  ~/Library/LaunchAgents/com.jdibackup.ZipCloud.autostart.plist

  4 adware files found. [Remove]

  Kernel extensions: ⓘ

  / Library/Application Support/Roxio

  [no charge] com.roxio.TDIXController (1.7-2014-10-18) [Support]

  / Library/Extensions

  xxx.qnation.PeerGuardian [no charge] (1.1.8 - 2016-04-16) [Support]

  / System/Library/Extensions

  com.devguru.driver.SamsungComposite [no charge] (1.4.32 - 10.6 SDK - 2016-04-16) [Support]

  com.seagate.driver.PowSecDriverCore [no charge] (5.2.6 (26913) - 10.4 SDK - 2016-04-16) [Support]

  / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.6 (26913) - 10.4 SDK - 2013-12-19) [Support]

  com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.6 (26913) - SDK 10.5 - 2013-12-19) [Support]

  com.seagate.driver.SeagateDriveIcons [no charge] (5.2.6 (26913) - 10.4 SDK - 2013-12-19) [Support]

  /System/Library/Extensions/ssuddrv.kext/contents/plugins

  com.devguru.driver.SamsungACMControl [no charge] (1.4.32 - 10.6 SDK - 2015-06-16) [Support]

  com.devguru.driver.SamsungACMData [no charge] (1.4.32 - 10.6 SDK - 2015-06-16) [Support]

  com.devguru.driver.SamsungMTP [no charge] (1.4.32 - SDK 10.5 - 2015-06-16) [Support]

  com.devguru.driver.SamsungSerial [no charge] (1.4.32 - 10.6 SDK - 2015-06-16) [Support]

  Startup items: ⓘ

  AdobeVersionCueCS2: Path: / Library/StartupItems/AdobeVersionCueCS2

  Qmaster: Path: / Library/StartupItems/Qmaster

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loaded] 9 tasks Apple

  [loading] 157 tasks Apple

  [operation] 72 tasks Apple

  Launch system demons: ⓘ

  [operation] com.seagate.TBDecorator.plist (2013-10-11) [Support]

  [loaded] 44 tasks Apple

  [loading] 159 tasks Apple

  [operation] 86 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-29) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-14) [Support]

  [operation] com.adobe.AdobeCreativeCloud.plist (2016-03-10) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2015-10-14) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-14) [Support]

  [operation] com.adobe.adobeupdatedaemon.plist (2016-04-12) [Support]

  [loading] com.adobe.agsservice.plist (2016-04-12) [Support]

  [loading] com.adobe.fpsaud.plist (2016-04-16) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-10) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2011-03-20) [Support]

  com.apple.AddressBook.ScheduledSync.PHXC... plist [loading]

  [failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-09) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-03) [Support]

  [failure] com.jdibackup.JustCloud.autostart.plist (2015-02-08) Adware! [Remove] 

  [loading] com.jdibackup.JustCloud.backupstart.plist (2015-02-08) Adware! [Remove] 

  [failure] com.jdibackup.JustCloud.notify.plist (2015-02-08) Adware! [Remove] 

  [failure] com.jdibackup.ZipCloud.autostart.plist (2014-10-21) Adware! [Remove] 

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (05 / 05/2016) [Support]

  [operation] com.pcv.hlpramcn.plist (2016-01-03) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Dropbox application (/ Applications/Dropbox.app)

  Don't sleep!    Application (/ Applications/ne DORS not!.) App)

  Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat Reader DC.app/Contents/Helpers/AdobeResourceSynchronizer.app)

  Agent application of file transfer Android (~/Library/Application Support/Google/Android File transfer/Android File Transfer Agent.app)

  CleanMyMac 3 Menu Application (~/Desktop/CleanMyMac 3-2.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  fuspredownloader hidden Application (~/Library/Application Support /.) WAS / fuspredownloader.app)

  Other applications: ⓘ

  [performance]    OpenObject.fuspredownloader.139552

  [ongoing] com.adobe.CCLibrary.2912

  [ongoing] com.adobe.CCXProcess.190432

  [operation] com.adobe.acc.AdobeDesktopService.93152.D970BA29 - A2C8 - 45 c 5-8049-32EA11B87EE4

  [ongoing] com.Adobe.accmac.66592

  [ongoing] com.getdropbox.dropbox.172832

  [ongoing] com.Google.Android.mtpagent.189472

  [ongoing] com.macpaw.CleanMyMac3.Menu.136672

  [ongoing] com.txtlabs.dontsleep.172512

  [loading] 402 tasks Apple

  [operation] 183 tasks Apple

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.40.2.0 - 10.8 SDK (2015-01-31) [Support]

  AdobePDFViewer (original): 11.0.10 - SDK 10.6 (2015-08-26) [Support]

  AdobePDFViewerNPAPI (original): 11.0.10 - SDK 10.6 (2015-08-26) [Support]

  DivXBrowserPlugin: 1.4 (2009-09-19) [Support]

  EPPEX plugin: 3.0.5.0 (2010-09-30) [Support]

  googletalkbrowserplugin: 5.40.2.0 - 10.8 SDK (2015-01-27) [Support]

  o1dbrowserplugin (original): 5.40.2.0 - 10.8 SDK (2015-01-31) [Support]

  Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

  CANONiMAGEGATEWAYDL (original): 3.1.0.2 (2015-08-26) [Support]

  QuickTime Plugin (original): 7.7.3 (2015-08-26)

  Unity Web Player (original): UnityPlayer version 4.3.7f1 - SDK 10.6 (2014-05-16) [Support]

  Unity Web Player: UnityPlayer version 4.3.7f1 - SDK 10.6 (2014-05-16) [Support]

  CouponstarSafeCouponPrinter: Unknown (2008-12-02)

  QuickTime Plugin: 7.7.3 (2016-04-15)

  CouponstarSafeCouponPrinter (original): Unknown (2008-12-02)

  Web of Google Earth plugin: 6.0 (2015-08-26) [Support]

  JavaAppletPlugin: Java 8 update 31 (2015-08-26) check the version of

  googletalkbrowserplugin (original): 5.40.2.0 - 10.8 SDK (2015-01-27) [Support]

  Flash Player (original): 16.0.0.296 - SDK 10.6 (2015-08-26) [Support]

  AdobeAAMDetect (original): AdobeAAMDetect 2.0.0.0 - 10.7 SDK (2015-01-15) [Support]

  EPPEX Plugin (original): 3.0.5.0 (2010-09-30) [Support]

  Default browser: 601 - SDK 10.11 (2016-04-25)

  JavaAppletPlugin (original): Java 8 updated 31 (2015-08-26) [Support]

  DivXBrowserPlugin (original): 1.4 (2009-09-19) [Support]

  SharePointBrowserPlugin: 14.0.0 (2010-08-25) [Support]

  AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  Default (original) browser: 600 - SDK 10.10 (2015-08-26)

  FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

  AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-04-12) [Support]

  SharePointBrowserPlugin (original): 14.0.0 (2010-08-25) [Support]

  iPhotoPhotocast: 7.0 - 10.8 SDK (2013-05-05)

  Google Earth plugin (original) Web: 6.0 (2015-08-26) [Support]

  iPhotoPhotocast (original): 7.0 - 10.8 SDK (2013-05-05)

  CANONiMAGEGATEWAYDL: 3.1.0.2 (2015-08-26) [Support]

  Silverlight (original): 5.1.10411.0 - SDK 10.6 (2015-08-26) [Support]

  Silverlight: 5.1.10411.0 - SDK 10.6 (2015-08-26) [Support]

  AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  User Plug-ins internet: ⓘ

  Unity Player: UnityPlayer version 1.6.2 (2007-05-28) [Support]

  Web of Google Earth plugin: 7.1 (2015-08-26) [Support]

  User iTunes Plug-ins: ⓘ

  Flash Player: 9.0.159.0 (2015-08-26) [Support]

  3rd party preference panes: ⓘ

  Dashboard KickStart (2015-08-26) [Support]

  Flash Player (2016-04-16) [Support]

  Flip4Mac WMV (2012-09-15) [Support]

  FUSE for OS X (OSXFUSE) (2014-04-09) [Support]

  Java (2015-08-26) [Support]

  Seagate for Mac OSX dashboard (2015-08-26) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Macintosh HD: Disc size: 999,35 GB disc used: 415,57 GB

  My schedule: disc size: 810,17 GB disc used: 377,50 GB

  Destinations:

  Untitled [Local]

  Total size: 999,86 GB

  Total number of backups: 1

  An older backup: 04 15, 2015, 22:26

  Last backup: 04 15, 2015, 22:26

  Backup disk size: too small

  Backup size GB 999,86 < (disc 793,08 GB X 3)

  Top of page process CPU: ⓘ

  76% com.apple.WebKit.Networking

  36% com.apple.WebKit.WebContent (2)

  8% WindowServer

  5% kernel_task

  3% safari

  Top of page process of memory: ⓘ

  469 MB kernel_task

  Com.apple.WebKit.WebContent (2) 426 MB

  156MO iTunes

  Finder 143 MB

  90 MB Dropbox

  Virtual memory information: ⓘ

  66 MB free RAM

  used 3.93 GB RAM (1.04 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  May 5, 2016, 20:59:22 ~/Library/Logs/DiagnosticReports/Spotlight_2016-05-05-205922_[redacted].crash

  com.apple.Spotlight - /System/Library/CoreServices/Spotlight.app/Contents/MacOS/Spotlight

  May 5, 2016, 20:44:13 self-test - spent

  Uninstall JustCloud.

  If JustCloud is running is running:

  Finder > Applications > utilities > activity monitor

  CPU > JustCloud

  Select it and click the force quit a process in the upper-left corner of the window.

  http://www.justcloud.com/uninstall-help

  Uninstall CleanMyMac3.

  http://macpaw.com/support/CleanMyMac/Knowledgebase/how-to-uninstall-CleanMyMac-3

  Help upgrading RAM 8 GB.

• Cannot add the business to the server of Xcode Developer account

  We are recording the below error when we try to add a team of company to the server of Xcode Developer.  We contacted the developer support, but they said it sounds like a problem with the Server Support.  Our membership in the program seems to be in good and due form, can we achieve all that we do.

  24 dec 13:31:47 ROSEDCDV0074164.local xcscontrol [55041]: DeveloperPortal: 60C6D908-C089-4AEB-96EB-C43BDBB5C1FC of the completed application (failure): {}

  'DTDK_Platform' = mac;

  creationTimestamp = ' 2015-12 - 24 T 18: 31:47Z ';

  httpCode = 200;

  protocolVersion = QH65B2;

  requestId = "60C6D908-C089-4AEB-96EB-C43BDBB5C1FC";

  requestUrl = "https://developerservices2.apple.com/services/QH65B2/mac/listDevices.action";

  responseId = "41562c22-1a92-4428-b53d-ba8682b97327";

  resultCode = 4100;

  resultString = "the selected team have not a membership in the program who is eligible for this feature.  If you need assistance, please contact Apple Developer Program Support.\\nhttps://developer.apple.com/support«;»

  teamId = NWNZQY65YL;

  userLocale = 'en_US ';

  userString = "the selected team have not a membership in the program who is eligible for this feature.  If you need assistance, please contact Apple Developer Program Support.\\nhttps://developer.apple.com/support«;»

  }

  Looks like a known bug.   Can read, then dup radar 23820480 directly with Apple.  If you're not familiar, this site Open Radar is not Apple, but hosts bug reports that users have sent to connected with Apple.  Different people who are connecting to with Apple bug reports will duplicate their reports.  It is a good place to look for known problems.