failure of configuration for the service mobile ePrint

Similar Questions

• The unit 3.1 (3) change of password for the Service account

  Hi all

  I am aware of the link and procedure on how to change the password of the service account of the unit 3.1 X here: http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_tech_note09186a0080093f54.shtml#topic2

  My question is this. I have 5 unity servers that use this service account in any area, which includes Europe and the United States. If I change the password in AD all services will continue to work with the old password as long as they have not restarted with the old password? I know I need to change the password for each service that uses the account and then restart the unit, but since AD taking so long to reply, I was hoping to change the password of the account one day and then the next day or even longer when I have planned for my failure, I can then change the password for the services on each server and then restart the unit and make sure that replication is complete and the services start again with the new password.

  I think as long as I do not have to restart services can I change the password of the service account in AD a day or two before I schedule my outage can I change the password for all services, and then restart the unit. I know that I can force replication, but it would be nice to be able to change it in advance as long as it is not flexible, whatever it is. Even force the replication takes a lot of time in our environment and I want to be sure, can I change well in advance without having a negative impact.

  Thanks for your time!

  Keith

  If you change a password for a domain account, it should respond immediately through the Organization as AD treats this with the highest coastal.

• "Failure of configuration of the windows updates". error: WindowsUpdate_80070003 / 0 x 80070003

  Original title:

  "Failure of configuration of the windows updates".

  Hello

  I use Windows 8 and updated to 8.1 last month after graduating from the messages on HP laptop. As soon as I updated to 8.1 it stopped working correctly. It has become very slow and I was unable to perform any task. I went back to Windows 8, once I had this option. Since then, I get this error message «Failure of configuration updates windows.» Restoration of the changes. Do not turn off your computer. »

  I also tried the clean boot troubleshooting mentioned here: http://support.microsoft.com/kb/929135

  However, I get this error: WindowsUpdate_80070003 / 0 x 80070003

  Please help ASAP!

  Hi John,.

  I will try to help you with this question.

  Thank you for the information provided. Coming to the question I would like you try these steps and check if that helps.

  Method 1:

  Try the steps from the following link and check if that helps.

  Error code Windows Update '0 x 80070002' or '0 x 80070003 '.

  If you still experience the issue after trying the steps in the above link, try the following steps:

  Method 2:

  See the following article try the steps that you have not yet tried and check if that helps.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358 

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode. Also when you do the system restore, you will lose data and the programs that are installed on the date you make the system restore.

  Make sure that you back up the data on the computer before performing all the troubleshooting steps.

  Method 3:

  If the previous step fails then please go ahead and try the following steps:

  I suggest to rename the pending.xml file, and then change the registry.

  a. boot from the DVD of Windows 8.

  b. click on repair your computer.

  c. click Troubleshooting, and then select Advanced Options.

  d. Select the prompt option.

  e. Once you open the command prompt, enter the following command and press ENTER.

  f. type cd C:\windows\winsxs, and then press ENTER.

  g. type ren pending.xml pending.old, and then press ENTER.

  h. system cannot find the specified files

  i. type regedit and press ENTER.

  j. select HKEY_LOCAL_MACHINE.

  k. on the file menu, click on load the hive.

  l. find the following folder:
  C:\windows\system32\config\components

  Mr. When you are prompted for a name, type Offline_Components.

  n. in the registry editor, locate and delete the following registry subkey:

  HLKM\Offline Components\AdvancedInstallersNeedResolving
  HLKM\Components\AdvancedInstallersNeedResolving
  HKLM\Components\PendingXmlIdentifier
  HKLM\Offline Components\PendingXmlIdentifier

  o. quit the registry editor, type exit at the command prompt, and press ENTER.

  p., click on restart.

  
  Note: the steps mentioned below include editing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Please return to the State of the question.

• Thunderbird 38.3.0: No writable calendars are configured for the invitations with the provider for Google Calendar 1.0.4

  Hello

  I searched many hours today in the internet and your forums, but it seems that this problem is not solved yet:

  No writable calendars are configured for the invitations with the provider for Google Calendar.

  My Thunderbird is 38.3.0 and the provider for Google Calendar 1.0.4.

  I put calendar.google.enableEmailInvitations; true but it did not help. I also tried [email protected]... @googlemail.com. Calendar works fine, it syncs, I see all the entries etc. But I can't accept invitations even IF she must have write access.

  What can I do? Is there a solution for this?

  Thank you!
  Daniel

  Use CalDAV here to access Google Calendar via lightning. I have no experience with the add-on of the provider.
  In any case, it is my understanding that you must assign an e-mail address to a calendar in order to be able to accept the invitations for this calendar. I see that in your screenshot.
  You can try to remove the Google calendar in lightning and re-create it. Given that all the data is on the server nothing will get lost.
  Or you may want to try CalDAV.
  https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

• I received this e-mail supposedly on apple store.   Dear customer, this mail is sent to you as a final notice.  «To avoid a suspension of your account, please allow 2 minutes for the service to the customer by clicking on the link below: confirm my accoun

  I received this e-mail supposedly on apple store: is this true?

  Dear customer,

  This email is sent to you as a final notice.

  To avoid a suspension of your account, please allow 2 minutes for the service to the customer by clicking on the link below:

  Confirm my account now»

  Thank you for choosing us.

  Sincerely,

  The customer service

  < link published by host >

  This is a phishing attempt. Do not respond. Shall not disclose any personal or financial information. You can use the address below to the suspicious message as an attachment to the Apple. [email protected]

  The link below has information to identify fraudulent emails.

  http://support.Apple.com/kb/HT4933

• How can I get my songs Apple music on my iPod Nano? I pay $15 a month for the service and cannot listen to songs on my iPod Nano 7th generation.

  I pay $15 a month for the service of music and cannot hear the songs on my iPod Nano 7th generation. Someone must have found a way around this now? I might as well sell my iPod, because I'm not paying for the song in iTunes as well.

  You can not.  Downloads music from Apple are written songs, does not belong to him. Apple music requires an Internet connection, so that the status of your subscription can be verified (as required by the content producers).  The only iPod that can use music Apple's iPod touch, because there Internet by Wi - Fi.

• 3097 memory failure allocating memory for the Variables

  Hello - have an old Lenovo tablet of 3 year with Windows XP. Its been performing very well. I get a message that appears randomly who says:

  3097 memory failure allocating memory for the Variables

  installedapp872 = StrSub (Apps, Start, stop-stop)

  WinBatch 32 2000

  WIL Version: 3.0cbv

  has ran a chdsk

  Reinstall the memory.

  Found nothing on Google about this message.

  I appreciate your help.

  Try R.clicking my computer, properties, advanced, performance, swap file,.

  Click Change button, with C: drive selected, the value to "let the system handle",

  2 X game, close, restart the pc.

  Also, try http://oca.microsoft.com/en/windiag.asp

  Download & run the test memory microsoft...

• Product key is expired, and now I need the product ID for the service to help install... help?

  Product key is expired, and now I need the product ID for the service to help install... help?

  Hi RUSSELLDUNN270,

  Which product key you are talking about? Is it for any application or Windows XP?

  If you are referring to the product key of Windows XP, you can use the product key update tool Windows that will make changes to your Windows installation to update your product key.

  For more information, please visit this link: update your Windows product key

  Hope the helps of information.

  Please provide us with more information about the issue so that we can help you further.

• "Error 1079: the account specified for the service is different from the specifiedfor account other services running in the same process" when I try to start it manually to the top of some program services.

  Original title: How can I restore my services to the default state.

  Here is the error message when I try to start it manually to the top of some service programs.

  "Windows cannot start the Diagnostic Policy on Local computer service."

  "Error 1079: the account specified for the service is different from the specified account.

  for other services running in the same process. »

  Hi raospent,

  1. have you made any hardware changes or software on the computer before this problem?

  2. what services you try to start?

  You can follow this link & check if it helps.

  Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

  Hope the helps of information.
  Please post back and we do know.

• Registration for the service is missing or damaged

  Hello

  I ran a scan with troubleshooting Windows Update tool and it came with this error: registration for the Service is missing or damaged. How can I fix it? Any help would be greatly appreicated!

  See you soon!

  Hello

  Usually, you get this error during the installation of the software updates. If Microsoft found some problems in the digital signature of the update is when you usually get this error.

  Take a look at this and see if this helps:

  How to set recording of corruption problems MSI software update:

  http://support.Microsoft.com/kb/971187/en-us

• registration for the service is missing & windows update does not not in windows 7

  I got the error "registration for the service is missing or corrupted" when I used the diagnostic download bits of one of your answers to someone else. I can't download the updates of windows from 08/10/16 - the latest downloads on 08/02/16. I did a full scan with McAfee & there is no problem in that. Given that the system sought & found these updates 08/10/16, the fan noise has served continuously as in a loop. I managed to stop that noise will 'services.msc', choose 'windows update', by selecting Properties & stop. If I start it again, it seems to go on and on but updates still do not download. I have Windows 7 Home Premium on a laptop. Can you help me?

  1. have you ever run the McAfee Consumer products removal tool?

  • Fact: McAfee (and Norton) applications are notorious for not not upgrade (or uninstalling) itself. "Leftovers" can be here your troublemaker.

  2 - is the same computer - not necessarily the same problem - as in one or more of these previous threads of yours?

  http://answers.Microsoft.com/en-us/Windows/Forum/all/unable-to-install-Windows-updates-kb3035490-and/a2837314-dd69-422e-9798-2ff937e375d2

  http://answers.Microsoft.com/en-us/Windows/Forum/all/Windows-Update-not-working-error-codes-643/b1dee3ce-9818-4e69-93c3-7b1a9489d036

  http://answers.Microsoft.com/en-us/IE/Forum/IE9-Windows_7/Internet-Explorer-9-not-working-with-some-apps/8dd4ee4a-04F9-4021-a3f5-a3764f403852

• HOW CAN I FIX THE ERROR: "REGISTRATION FOR THE SERVICE IS MISSING OR DAMAGED?

  HOW CAN I FIX THE ERROR: "REGISTRATION FOR THE SERVICE IS MISSING OR DAMAGED?

  When you see this error message?

  IF its all in trying to make an update, then:

  Make sure that the following services are listed and started. in "search programs and files" type "services" (without the quotes). In the results, click on 'services' and the services window should open.

  Make sure that the following is listed and started:

  Background Intelligent Transfer Service

  The base filtering engine

  Cryptography Service

  DCOM Process Launcher service

  Remote procedure call (RPC)

  RPC end point mapper

  Windows Modules Installer

  Windows Update

  IF it's trying to make an update and the foregoing is listed and running, then try this fixit - https://support.microsoft.com/en-us/kb/971058 to see if it helps.

  PS - if one of the services above are not listed, or is listed but not start, then see if you can update your antivirus program and run a scan full to see if it detects malicious software. Then, run the fixit above.

• How can I remove guest account configured for the administrator?

  I tried to add a second user account on my computer and I blew it. My main user account is now defined as a standard account and no matter how many times I click the button to set it as an administrator account that he will not save these settings. The guest account (which I want to delete) is defined as an administrator account and it wont let me save it as a standard account, because there is no other administrator accounts. Even when I try to create a new account just to see what he would do he tells me that he cannot accept some of the characters that I use for the name of the account, even if it's just 5 letters, so I can't even create the new account.

  I have no idea what's going on with my user settings, but I want to just that everything back to how it was before... with a single main account configured for the administrator.

  Can someone help me?

  I bet that your administrator account is an admin account and your guest account is a regular account. Buttons that you look at don't tell you the State of the special consideration, but the change that you can apply. In other words, looking at the administrator account, the 'Administrator' button is highlighted not because it's already an admin account!

  Now you should do this, in the following order:
  1. Create a CD to repair Windows via Control Panel / backup and restore. People like you who make their own PC maintenance need.
  2. Test the CD.
  3. Create, test, and document an admin account to spare, even you have a spare House key.
  4. Disable the guest account.

• % CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported

  Hi all...

  I think % CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported

  on my 1841 which is currently set to L2L via internet cable. Anyone seen this before? I can't find anything on Cisco related to this.
  The tunnel rises and I got the same configs using DSL except interfaces are different. Thank you...
  My configs are below:
  crypto ISAKMP policy 10

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  # address a.a.a.a isakmp encryption key

  ISAKMP crypto keepalive 20 periodicals

  !

  life crypto ipsec security association seconds 28800

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac xform

  Crypto ipsec df - bit clear

  !

  10 VPN ipsec-isakmp crypto map

  the value of a.a.a.a peer

  Set transform-set xform

  PFS group2 Set

  match address CRYPTO_ACL

  !

  interface cable-Modem0/1/0

  no ip address

  Bridge-Group 1

  Bridge-Group 1 covering-disabled people

  !

  interface BVI1

  IP address 98.x.x.x 255.255.255.224

  IP virtual-reassembly

  VPN crypto card

  Hello DialerString,

  I fear that the ACL is not related to the question, so I expect not to see anything in the debug output

  Hope to help

  Giuseppe

• Configuration for the Exchange Server issue

  I have a question on an Exchange Server, I noticed that one of my Exchange servers has 4 partitions spanning 2 hard drives and a parition of M which is 55GO, but that does not appear in disk management. M partition contains the domain folder, the mailbox databases are on the D: drive. How will I know how much I really voicemails of disk space? And this configuration is supported?

  Chris

  The "M" 'virtual' drive that resides on Exchange (55 additional GB, its representation is not just messages of real exchange located on who will drive you have configured for the mail store).

  Another pattern on this drive "M":

  The default for this reader is the reader of 'm', but if you manually created a "M" drive before installing Exchange will change to another drive available. It is now recommended to 'disable' this disc.

  Run the "Best Practices Analyzer Tool" on the Exchange Server and it will find any question you should change. To turn off virtual drive is one he'll find and indicate what registry entry to change:

  http://www.Microsoft.com/technet/prodtechnol/exchange/downloads/2003/analyzers/default.mspx