T500 fingerprint reader

Similar Questions

• T500 fingerprint reader win 8

  Someone else is having problems with the fingerprint reader on Win 8 64 bit on the T500? Windows doesn't detect all biometric devices.

  
  

• T500 fingerprint reader does not load at startup (blue screen)

  I have 2081CTO T500. Provided natively with Vista Home, but I reinstalled with XP Pro SP3. All the latest updates are installed both drivers and windows (as of March 12, 2010).

  I've had this laptop for about a year and the fingerprint reader to work properly. A few months ago it stops working for some reason any and I stoppped using it. I finally had time to reinstall the whole windows and installed. It worked well for about a day, but today I was using my computer and it suddenly froze unanswered. I turned off and when I walk back, the fingerprint sensor would not load and a blue screen came up with an error that a failure to boot and windows kept just restart at this stage and display the same message. I password protected journal and had loaded all ten fingers to use during the connection (not the Welcome screen).

  I tried power cycling, did not work. Subsequently had to connect via safe mode, disable the fingerprint sensor to connect and then reboot in normal mode to be able to connect without the Blue error screen. I tried updating the BIOS, did not work. Reinstalled the sensor of fingerprint, again the same problem. I also reset the fingerprint sensor in the BIOS and reinstalled the software, but still the same problem. Basically now I use the home screen and in this way, that I don't get the Blue error screen. It just continues to show as if the sensor is train load, never happens, so I just put a password and enter. I remember that some months ago, when I had a problem, it was similar. It worked fine, but when I turned off the Welcome screen, I suddenly had a problem with the sensor that was not resolved until I reinstalled windows. Now that I think of it, it could be the same disabling the Welcome screen things screwed up again.

  Could someone please explain what is happening? Why are there so many problems without the windows welcome screen? I know that the sensor works very well because when I am trying to scan my fingers or even connect to Thinkpad security systems, it works fine. It's just windows connect you that is screwed. I can't go back again to work at least with the Welcome screen. I'd appreciate any help.

  After a few bars, I isolated the problem to the personal firewall. I changed the settings and fingerprint reader worked very well. I hope this will help someone in the future.

• T500 fingerprint reader) for individual programs?

  I have just installed the fingerprint reader software and can now logon using my finger, which is great.

  but can I use the software to log individual prgrams? for example when I open my e-mail program (thunderbird), it could be invited to use a finger to be able to access thunderbird? and other programs too, like maybe Skype etc. ?

  Just a reminder that Lenovo has established this community for the support to users, and it is animated by volunteers like me. Although there is a presence of Lenovo, they cannot read and respond to all posts. They try to help with some of the broader issues.

  The Client Windows 7 for your T500 Security Solution is here:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-73785

• T500 in edition of Windows 7 fingerprint reader

  I recently installed Windows 7 x 64, everything was fine, except that when I disconnect / lock / watches the computer and I have try to log in using the fingerprint reader, I get the following error message: "this computer is locked. Only the connected user can unlock.

  But I am logged on (assuming that wasn't there one, after disconnection,...), administrator and user only.

  So to connect, I just enter the password and everything works, but in Vista, it worked without problem.

  When I start or restart the computer, I have no problems, the works of great fingerprint reader (in the bios and the part of Windows logon).

  Got most of the drivers through Thinkvantage System Update, but had to get the drivers of the fingerprint on the Lenovo site, released 10/22 version 3.3.0.56 (original and official version for Win7)

  Any solution to this?

  Thank you!

  Yes. You are right. The previous data fingerprint (XP or Vista) still exists in the sensor even after you format the HARD drive and instatll a new OS Win7. Then you'd better delete fingerprint sensor once from the BIOS > Security > Fingerprint > internal Reset data before installing a new OS fingerprints.

  I am fan of ThinkPad and Lenovo volunteer. FOR INFO.

• 2015 x 1 carbon fingerprint reader and Windows 10?

  Just bought the x 1 carbon, upgraded to windwos 10 and I can not install the Lenovo Fingerprint Reader software! I don't see that 8.1 avaiable. No option for Windows 10?

  Anyone?

  Too bad! Found a fix.

  https://forums.Lenovo.com/T5/ThinkPad-T400-T500-and-newer-T/fingerprint-support-on-Windows-10-ThinkP...

  In response to the reports of customer in the fingerprint reader does not not as expected on the X 1 portable carbon (20A 7, 20 A 8, 20BS and 20BT) Lenovo has released a updated driver.

  Version 4.5.505

  (Fix) Difficulty for the driver does not work when upgraded from Windows Update of OS Win10 TH2.

  Validity of fingerprint driver common v.4.5.505 can be downloaded here: http://support.lenovo.com/us/en/downloads/DS103635

  Thank you

• T420 Windows 8.1 fingerprint reader

  Lenovo Fingerprint Reader software is not Windows 8.1, any help?

  Hi all

  I found a solution for the integrated software for Windows 8.1 finger.
  So, currently, it's for my T500 but it could work with T420.
  According to Microsoft, the finger native connection manager works if the finger sensor driver is based on the 'Windows Biometric Framework'.
  Then, I remember that on the AuthenTec support site, it was possible to download a compatible driver, but since the recovery by Apple, this support site has disappeared.
  We have a chance that the internet has a backup for drivers

  From the link below, you can find the driver for Windows 8.1-compatible finger.
  If the link does not work, try searching for the name of the driver on your favorite researcher: "WBF3.4.4.1027."
  http://www.Touslesdrivers.com/index.php?v_page=23&v_code=36153&v_langue=en

• Problem with after downgrading fingerprint reader

  After downgrading from Vista to Xp business professional, I have some problems with my fingerprint reader.

  The error message is: 0xe7210005 user cannot be saved. Found no fingeprint reader.

  I have already installed the latest version of the driver software and fingerprinting, but it does not work.

  System information:

  T500 2055W2G Win XP Professional SP 3

  SMBIOS Version: 2.4

  Thx for your help

  I got the conversion kit. I just installed Win XP again and now it works

  Thx for your prompt response!

  See you soon

• Windows 7 can not get the fingerprint reader to show

  I have a T500 I removed Vista and installed Windows 7.   But now I can't the fingerprint reader will be displayed at sign in.   I think that I have installed the driver, but it does not appear.   I went into Device Manager and it seems to be responsible.   Any ideas?

  You need not fingerprint software from Lenovo. It's just another program that is running in the background.

  Windows 7 has all the functions that the software Lenovo offers. Whether you use it or not, it's up to you.

  in any case, to get the fingerprint logon to work, you must go into control panel > biometrics. Then you need to check "Allow connections to fingerprints" (or something of the sort). It will ask you to register to use fingers.

  The next time you start your computer/log, you will be asked to use your fingerprint to log. It works exactly as it would if the Lenovo program was there (with the sole exception of the sliding-finger-to-boot-computer functionality).

• Fingerprint reader does not work under Win 7

  I have a T500 which I just upgraded from Windows Vista business to Windows 7 Professional.

  Everything except the fingerprint reader and Wireless Broadband seems to work.

  The fingerprint reader is Authentec AES2810, with driver version 2.0.0.18 dated 24/11/2009.

  If I run the footprint of Lenovo software version 3.3.0.58 I get the error that the software cannot

  communicate with the probe.

  Wireless Broadband card is the Ericsson F3507g. The following drivers are installed:

  Network cards:

  -F3507g Mobile Broadband Driver, version: 1.0.0.52 dated dated 29/07/2009

  Ports (COM & LPT):

  -Ericsson F3507g Mobile Broadband minicards GPS Port (COM6), version: 1.0.0.28 dated dated 29/09/2008

  -F3507g Ericsson Mobile Broadband Device Management (COM4), version: 4.54.7103.1 dated dated 26/06/2009

  Chip card readers:

  -F3507g Mobile Broadband USIM Port, version 6.0.0.7 as of 12/05/2009

  Even if there is information about the drivers listed above says the USIM card device:

  "No drivers are installed for this device".

  Universal Serial Bus controllers:

  -F3507g Mobile broadband device, version: dated 4.54.7103.1 dated 26/06/2009

  If I use the ThinkVantage Access Connections software, I get the following error message:

  "The current wireless WAN connection is managed by another client utility.

  Close the client utility, and then try again. "But to my knowledge no other wireless broadband client is running.

  If I try Mobile Broadband Connect through Vodaphone UK interface, I get the following error message:

  "No found Wireless Broadband Mobile device."

  And finally, if I try ThinkVantage GPS I get the following message:

  "The GPS NMEA CPM port is not available. You should check the following things.

  -Another GPS application using the COM port.

  -COM port is disabled. You can activate the COM port in Device Manager.

  Windows Vista, the fingerprint reader both the wireless broadband device worked without

  all of the problems. Anyone have any ideas on how I can solve these two problems.

  Best regards

  Frode

  Hello FrodeW!

  Can you do me a favor and test this theory please (use the driver Lenovo Authentec, do not use the Microsoft Update driver):

  http://forums.Lenovo.com/T5/R-series-ThinkPad-Laptops/problem-with-my-fingerprint-reader/m-p/209486#...

  Thanks in advance.

• Fingerprint reader not working after update

  I have updated to iOS 10 and now my fingerprint reader will not work. I have a 5 s.

  You may need to setup it upward > ID use touch on iPhone and iPad - Apple Support

• Update worm 30 does not my HP SimplePass (password fingerprint reader) to Invoke

  Aargh... Just discovered another problem with this worm update. 30 my SimplePass (HP program, not an Add on Firefox) does not work. When I go to a site that requires a password, SimplePass opens and asks me to drag my fingerprint reader... I'd really like to get this working again... It still works on Internet Explorer...

  I'd appreciate any help, thank YOU!

  Firefox 30 switched many plugins "Always turned on" to "ask to activate. This change was to require your permission to untrusted sites to use plugins. However, some plugins like HP SimplePass affect the user interface, so that they do not work well with this setting. Here's how to switch back:

  Open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Look for the plugin SimplePass and change to ' activate ' "always enable".

  It may not take effect immediately in the current window, but should work in a new window, or after you exit and then restart Firefox.

  Does it work?

• In Firefox fingerprint reader

  Looking to turn my on my HP laptop fingerprint reader. This is confirmed working correctly in normal applications, and when you use IE. I'm moving and it is one of the last points with which I struggle.

  Y at - it a required plugin? It's just being blocked by FF?

  When I get to a Web site that requires a log that I put in place, I see the app HP symbol in the corner of the screen properly, however, sliding my finger does not have the information. The system then processes my shot as a new Web site.

  I confirmed several website addresses to be correct, and it seems they are being recognized, but nothing happens.

  Until someone simply recommends using a master password, this is not allowed by our IT Department.

  Thank you

  MonkeyTime Hello, unfortunately we cannot provide support for third party products which hang in the browser - you will probably get a better response and more guidance when you contact hp support. they are also the only ones who can fix bugs or make necessary adjustments in the addon to fingerprints. Thank you...

• Pavilion dv7 6051ea: how to get the fingerprint reader works on Windows 10

  Just upgraded to Windows 7 Pro for Windows 10 Pro. The fingerprintreader has stopped working. I find the possibility to set up, but the installation is grayed out as long as no driver available. Can't find one on any forum support? Anyone else having this problem and sorted it please?

  On August 11. I've been running Windows 10 updates on a daily basis since the upgrade and now after a reboot of the fingerprint reader has started working? and remembered my impression as well. I guess that Microsoft dropped in a fix for this (which works for me) then maybe something to try?

• Windows 7 RTM fingerprint reader and webcam for TX2 driver status

  I read somewhere on the site of HP windows 7 drivers for this TX2 - 1027CA won't be available until October 2009. Still I use it now, and the main system works well. There is a problem in the fingerprint reader and perhaps the webcam for me at this point. Until that HP provides drivers updated, I was wondering if there may be versions beta drivers for the TX2 I could try. I am ready to continue using windows 7, but I would try to install the drivers updated as soon as possible. Maybe it's two months away and one month after the availability of the operating system for MSDN subscribers (several companies and developers). I guess this list of reading, some other people who have found what is and is not possible on the TX2 today under 7. Could you give us a brief run down on what drivers are working or not working do not? Fingerprint reader and webcam are of great interest for beginners. My goal is to run what can work.

  The WebCam driver installation is not necessary. You can use the MediaSmart WebCam software to test

  Link: ftp://ftp.hp.com/pub/softpaq/sp43501-44000/sp43591.exe

  Driver fingerprint (beta):

  32-bit: http://win7beta.authentec.com/W7Wbf32.exe

  64-bit: http://win7beta.authentec.com/W7Wbf64.exe