Failure of the Installation Windows 7

Similar Questions

• The failure of the Installation Windows 10

  I have an Acer V 17 Nitro Black Edition (VN7 - 791-G)

  I tried more than 10 times to upgrade to Windows 10. Using the application (said I was ready to be upgraded) using a USB Microsoft Media creation tool installation disc. I tried to update each time I get the same error:

  Something happened

  The Installation of Windows 10 has failed.

  This is the only error I get. I have the latest drivers, did a clean boot with no agenda and still get the same error. There are a lot of crazy ideas on how to do, but none of them worked (for example, setting the date by day in the future)

  Does anyone have an idea, what could be the cause as the technical support of Microsoft is worth nothing.

  Thank you

  Site

  [subject line changed to reflect the new topic]

  I thought about it.

  I checked the error log that was created during the installation to fail. He said that my computer name is invalid. The name of my computer's Proxy. It seems that Microsoft does not like names like the one used by your computer. I tested this by renaming my computer system and there still not with the same name is not valid error. Then, I changed the name of the computer to Nitro and the installation worked perfectly. After all this time and effort, I am happy that I thought about it.

• Failure of the Installation Windows 7 Service Pack 1 x 64 error code 0 x 80073701

  Hello, I tried to install on Window 7 Home Premium x 64 SP1 several times today, and all end up with failed with the same error code. (error code 0 x 80073701 - the reference cannot be found). I tried troubleshooting windows update, updated system preparation tools, disable security software, and even installing in safe mode, and all end up insufficient. I use the Offline Installer (Windows6. 1 - KB976932 - X 64 .exe) because the help of windows update, the download will not start even (in a first time, it starts, then stuck at 22 percent, and then it shows the same error code).

  I hope you can help...

  Additional information:

  Firewall: Windows Firewall

  Antivirus: Microsoft Security Essential 2.0

  Additional security software: Malwarebytes Anti-Malware 1.50 with real-time protection (has been disabled, but even failure), Panda USB Vaccine (I think that this has nothing to do with this problem)

  The extra TSRs: SmartDefrag 1.5, Advanced SystemCare 3.7.3 Daemon Tools Lite

  Well after hours of time, I found a solution and posted a comment here:

  http://Marcin.Malkowski.EU/2011/03/02/Windows-7-Service-Pack-1-error_sxs_assembly_missing/

• Cannot reactivate CS3 after the failure of the installation Windows 10

  I do not have the opportunity to turn off my copy of Dreamweaver CS3, after that my installation of Windows 10 went pear shaped. Now it tells me to activate by phone, but the number says: there is no support for the activation of the phone not more.

  Any advice would be appreciated please?

  Thanks Vivek. I actually tried several suggestions in the various messages of the forum before posting myself.

  The really strange thing is than the software actually ended up by activation of shortly after I posted, although I had tried a dozen times before that. I say it was weird it's because the last attempt happened only because I meant to click on cancel, but accidentally clicked retry and lo & this is, he said it had activated! go figure huh?

  Concerning

  Geneviève

• update problem failure in the installation of updates to restore changes

  I use windows 8 unique language. Whenever I have install the update and try to restart my pc, when you set up the window, there is message 'Failure in the installation of updates to restore changes.'

  Help, please.

  Thank you.

  Hi Manish,

  This problem may occur if Windows updates are not getting not properly installed or damaged.

  I suggest you try the steps from the following link:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after troubleshooting.

  
  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• The size of the installation window InDesing CC 2015 TOC

  Hello, the installation window size OCD is twice larger than my screen, all other windows are OK?

  Help, please

  Jean

  See: troubleshooting 101: replace, or 'trash' your InDesign preferences

• I don't think my CS2 is an 'upgrade', but the installation window says it's...

  I had this CS2 on my XP computer for years.  I don't remember the upgrade from a previous version, but the installation window tells me that it is an upgrade and he needs to see the original PS.  What should I do now?

  You can install is no longer your CS2 origin... Read on

  CS2 (or earlier version) software activation server replacement

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  When you install the special version of the PPro2 on a Win7 or Win8 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• Cannot cross the installation window.  Where is the actual program?

  I bought last week at 5.2.  Downloaded from the page of my Mac purchase.  Click on my downloads, open and the installation window popped up.  I clicked on Adobe Photoshop Lightroom 5. pkg and opened the window of installation process and I went through the Setup screens.  He said that the download was successful.  So, where is the program?  Whenever I click on the Lr icon, it opens the window of installation even with the .pkg and the ReadMe.pdf 5 of Lightroom.  At this point, I went through the installation of two or three times thinking that something different is going to happen (silly).  I have not been able to cross to install.  I feel extremely stupid but can't seem to understand.

  That's all that I keep seeing.  Help!

  Thank you very much.

  Linda

  Hi Linda,.

  Will try to highlight and looking for Lightroom:

  

  If it is correctly installed, you will see the Applications: Adobe Photoshop Lightroom 5

  Julia

• Link in the installation window tutorial

  Hello

  I have asked this in the forum creative suites, but maybe it's the right place.

  I just installed Production premium 5.5 and in the installation, he says "view tutorials" but I tried to launch the first first, and closed the installation window. At this stage even once, I couldn't even using the installation diskettes.

  I would like to see these tutorials. Do you know how can I see them?

  I found this link on the web, which is referred to as link? :

  http://TV.Adobe.com/watch/CS-55-production-premium-feature-tour-/Adobe-Creative-Suite-55-p a-bonus-feature-tour-preview.

  Thank you

  Hello

  The link above is one of the resources available for tutorials on Production Premium.

  You can also use http://tv.adobe.com/product/cs-production-premium/ which has the complete list of video tutorials for Production Premium products.

  You can also access the help function in individual products that are part of the suite Production Premium by launching one of the applications and by clicking on "Help" in the menu bar.

  The content of the help provides complete information on all the features of the product and is a very useful resource if you already know the basic features of the software.

  Thank you

• "Database corrupt installation" - discovered after failures repeat the installation of automatic updates of Windows

  We're running out of WinXP SP3.  Apparently, we are unable to install/uninstall anything correctly.  I think it may have something to do with "a basic installation damaged."  I got this error when trying to manually install KB972581 (a security update for 2007 Microsoft Office System).  This could have been caused by running the Windows Installer cleanup utility, I didn't have problems with Office 2007.  We were informed at all by continuing to upgrade with another program issues.

  We daily use Outlook 2007.  Multiple users, so we can't delete it.

  Same thing with KB970895 (update of security for SQL Server 2005 Service Pack 2) - another failure with the description of the error "Unable to install Windows Installer MSP file".

  Basically, the automatic updates of Windows always fail.  Comprehensive research of these forums, I found and ran the Microsoft FixIt! # 50202, without result.

  How can I fix anything that makes things installation fails?

  I had a similar problem - resolved two things actually. First make sure yu have the latest windows installer engine. Then download the package fails and run interactive mode. This will give you the 'real' error which causes the failure so that you can correct it.

  In my case it was a dependency on another file system that was resolved by running sfc/scannow - it's maybe not the question you... once again, run the full installation package and also to enablehttp://support.microsoft.com/kb/223300 logging to track down issues...

• Failure of the installation of the Windows SDK on Windows 7 x 64. "the installation failed with the return code 5100.

  I try and install the SK and it fails for Web and ISO Setup > DVD drive. Same error every time:

  12:22:50 Wednesday, July 11, 2012: C:\Program Files\Microsoft SDKs\Windows\v7.1\Setup\SFX\vcredist_x64.exe install failed with return code 5100

  The following lines are less useful because they suggest to go to a place that I did not.

  12:23:21 Wednesday, July 11, 2012: [SDKSetup:Error] Config_Products_Install: product Installation Microsoft Windows SDK for Windows 7 (failure): Please refer to Samples\Setup\HTML\ConfigDetails.htm document for more information. Fireplace: In SDKSetup.Product.ConfigureRelatedSfx () at SDKSetup.Product.ConfigureNewProduct (ManualResetEvent CancelEvent)
  12:23:21 Wednesday, July 11, 2012: [SDKSetup] Config_Products_InstallNew: complete the installation of the new product: Microsoft Windows SDK for Windows 7
  12:23:21 Wednesday, July 11, 2012: [SDKSetup:Error] Config_Products_Install: software Windows (failed) SDK installation: Installation of the product 'Microsoft Windows SDK for Windows 7' reported the following error: Please refer to Samples\Setup\HTML\ConfigDetails.htm document for more information. Fireplace: SDKSetup.Product.ConfigureNewProduct (ManualResetEvent CancelEvent) at SDKSetup.Product.SetupProduct (TaskMode taskMode, ManualResetEvent CancelEvent) at SDKSetup.ProductCollection.SetupProducts (TaskMode taskMode, believing believing, ManualResetEvent cancelEvent) to the SDKSetup.ConfigProducts.DoCurrentTask (Group TaskMode)

  Any ideas what could be worng? The rest of the log file is too big for this message but I can send it to someone who can help.

  Hello

  I suggest you try the steps listed from the link below,

  Windows SDK fails to install with the return Code 5100

  http://support.Microsoft.com/kb/2717426/de

• Power failure during the installation of Windows 7

  We had a power failure most when setting up my Windows 7 upgrade installation and it will not complete the installation. I downloaded the iso image and an installation DVD, but it does not start the machine. I checked the DVD works on another box of Windows 7, so I'm stuck. I ran the front compatibility checker I tried to upgrade and we found some good things. Any advice in addition to the upgrade of the mother/processor board?

  Remove the hard drive from the computer, connect it to another format only the Windows partition, reinstall it to the original host and try to re-run the installer of Windows...

• Failure of the Installation of M1536MFP on 99%

  Stuck on 99% for a few minutes and I get: "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. »

  What I've done so far:

  Re-download the standard and complete version of the pilot, as an administrator, connecting a different username (Administrator of the domain).

  The computer is a brand new Windows 7 Pro 64 bit with latest updates, connection to 2008 R2 domain controller running.

  In the event log, the only mistake I see is the WMI ID 10 event (something on / /. / root/CIMV2, SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor').

  The below suggestion helped me to solve my problem with the installation failure of 99% on a XP PRO machine. Thank you!

  I deleted the DRIVER of PRINTER UNIVERSAL - restarted the PC - and has been able to successfully run the installation package from HP for basic printing and scanning functions.

  "Are you having driver UPD (HP universal printer driver) installed on your system? your problem seems to be the driver of the UPD collide with M1536 driver, if it is possible, please uninstall the UPD until your new installation try with driver software M1536 clearly. »

• Assistance required after you download Sierra - locked in a spiral of failure of the Installation

  Hello - I am a student of the University who made the mistake of thinking I had to upgrade my OS system after seeing some updates new flashy in the Sierra. Long story short, that my computer is locked into a cycle where I restarts and the installation process will begin installation but end abruptly and ask me to reboot again.

  I have exams and papers due and seriously want access to my data again. I don't have a back up of my files. As such, I am looking for a method that will allow me access to my files that I need to be able to read notes, print etc.

  Details: I have an old MBPro by the end of 2011. He was on as the primary OS x Lion. I had updated some time later. More recently, I got El Capitan and it worked very well. I downloaded Sierra in the background as I did work at home and after installing it, it asked me to reboot. This was the point that I was able to come back from. Reboot after installation scenario is as follows:

  -A progress bar comes up saying 34 minutes until completion

  -The progress bar goes to 33 minutes until completion

  -Beginning of fans of my computer acting upward and the bar stops and crashes of progression

  -The installation process says he doesn't have and asks me to restart my computer

  Specifically, I get the message 'Mac OS could not be installed on your computer. File system check or repair a failure. Quit the installer to restart your computer and try again. »

  When I quit the installer of the OS, I am taken to the startup disk option and asked to choose a system to reboot my computer with. I see 'Macintosh HD macOS 10.11.4' but when I click on it and try to restart I get the following error message, "you cannot change the disk on the disk selected. Startup disk could not gather enough information on the selected disk. »

  Things I've tried:

  Internet recovery mode: I went here to do a restore of the Mac OS x comes with my computer (Lion). This attempt fails and the computer tells me I can't downgrade because a more recent OSX is already on my computer...

  Recovery mode: I tried to come back just El Capitan from here. When I try to do the process will take literally one second before I get a notification saying: "an error occurred during the preparation of the installation. Try to rerun this application".

  Disk utility: I tried to do first aid and repair on this menu on the big disk image (since some of them pop up... I'm sure that the big one is my computer and the small setup of Sierra is?). I see that I 115Gigs franco 319Gigs departure. When I click on check and repair, the process takes some time and seems as he goes to halfway through before I get errors in the two. Repair error wonder backup my data.

  -some specific stuff; the journal for the repair of first aid says something like: the Macintosh HD volume could not be completely checked. File system check exit code is 8. Update support partition for the volume as required. File system check or repair a failure. Operation failed... »

  Safe mode: I can't start in safe mode. My computer will load the apple logo, progress on 3/4ths of the way start-up and then crash on its own and not restart.

  Things I have tried:

  Constituting a new boot USB of OS Sierra - I read that in so doing I can substitute the installation process that is going on right now on my computer and start a new... I hope one that works. I was not able to do this again, because I need someone to another macbook to make it and none of my friends won't let me touch their computers after the fiasco that happened on mine... Can I get some feedback on this?

  Backup: I don't have an external hard drive... I'm willing to buy one if necessary, but I don't know how to make a backup in a world where I don't have access to the major functional sections of my computer. Also, if my computer is * session here now, I'm worried that a backup will be essentially a * a backup... is this the work of the computer?

  Other thoughts:

  -my computer was working fine before I tried the upgrade... no complaints on my end, it was a real trooper

  -Maybe the download was corrupted?

  -I learned today that the operating system installation process requires internet connection - maybe that my internet connection is bad?

  -on that note, I want to say I tried a lot of different things. Been in different parts of the campus (different parts of my dorm building, IT support across campus, etc.). My University has also 3 options of WIFI, but each requires a separate verification process. Throughout this process, I have been connected to one of these methods. Switching may help? But, if I can't do the verification step (i.e. open a browser and type in the details of my student specific to actually use the web), I do not think that this will help you a lot. In addition, I am sure that I am already using one of the less frequently used options.

  I want to avoid a permanent possible deletion because there are important things on my computer.

  Any advice? Enjoy it!

  Same problem here on my Mac Mini end of 2012. I couldn't find any fix so far. The machine worked perfectly fine before with El Capitan and had about 50 GB of available disk space. I have use any version beta of Sierra, but officially released one that came yesterday. Really disappointing to see the new system operating software with fundamental questions and no good way to solve it.

  Any help really appreciated.

• Failure of the installer: NIPathsDir property NISHAREDDIR is not defined

  I have another problem with the installer. The user gets

  "Fatal error!" The required NIPathsDir NISHAREDDIR property is not set.

  during the installation of Windows 7 Ultimate in Parallels (!).

  I have posted the file install_log_ian64.txt on the incoming FTP server. Froom what I see there is a defined NISHAREDDIR64 but not NISHAREDDIR. Is it a bug in 32 bit 64 vs in the installation program, or a quirk in Parallels?

  Thank you

  Ian

  Hi Ian,

  It seems that your username has faced a form of this question. In his case, there are several places of Windows (probably my pictures, My Documents, etc.) pointing to an inaccessible network location: \\.psf\home\*

  This is a limitation of many installers of Windows which must validate all paths to system at installation time. I hope that your user can make this accessible network location or, if not, change the system paths to point to something else to change in HKEY_CURRENT_USER folders.

  Luis