Failure of the mouse on laptop

Similar Questions

• How to put running or OFF controls the mouse on laptop or how do I get rid of modules and toolbars like conduit, spirit and friend spark Checker?

  Hi, are two quick questions, there any settings of the mouse on laptop computers. I use a mouse usb right now about this because the finger mouse does not work.

  are there ways to activate and deactivate? and how can I get rid of modules and toolbars as auditor of conduit and friend and spark of spirit? any help would be great. Thanks in advance

  Original title: CONTROLS the MOUSE for laptop

  Hello

  Thank you for your question to Microsoft Community.

  Quick questions:

  1. What browser version are you working?
  2. What is the brand and model of the laptop?

  Case 1:

  Mouse, touchpad and keyboard problems can have several causes:

  ·         Cables that are not connected correctly

  ·         Incorrect device settings

  ·         Missing updates

  ·         Corrupt or incompatible drivers

  ·         Hardware problems

  As a first step, you can check the status of the devices by following the steps mentioned below:

  a. click Start, type Device Manager in theStart search box and press ENTER.

  b. Locate the mouse and other pointing devices and expand the same.

  c. click Pointing device and check its status.

  Method 1:

  To enable the touchpad try these steps:

  a. click Start and select Control Panel.

  b. Select mouse.

  c. click on Device Settings.

  d. Select the touchpad device.

  e. click on turn on.

  Note: The steps above are generic to any model of laptop. The parameters may vary depending on your model of laptop.

  Method 2:

  If activation touchpad does not help, you can go ahead and uninstall the drivers of the touchpad and re - install the same thing again.

  To uninstall the touchpad drivers,

  a. click Start, type Device Manager in the Start search box and press ENTER.

  b. Locate the mouse and other pointing devices and expand the same.

  c. right click on the Touchpad driver and select Uninstall.

  d. restart the computer, if prompted.

  Also I suggest you to consult the following link.

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Case 2:

  Now for the question of the toolbar, if you use these methods follow Internet Explorer:

  Method 1:

  If an unwanted toolbar appears in Internet Explorer, you can turn it off using the Add-ons Manager. Sometimes, however, the problem may be more persistent. If the problem persists, start Internet Explorer in no add-on mode and then use the add-on Manager to disable all add-ons that you have not intentionally installed.

  You can see the following link for more information:

  Manage Add-ons in Internet Explorer

  http://Windows.Microsoft.com/en-us/Internet-Explorer/Manage-Add-ons#IE=IE-8

  Method 2:

  Most toolbars can be removed using Add / Remove programs.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 3:

  You can also use the specific toolbar removal tool to uninstall or remove the toolbar from the computer.

  WARNING:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thanks for posting the result and let us know if you need assistance on Windows.

  We will be happy to help you.

• Satellite A30 - button of the mouse on laptop

  Hello

  Do anyone know where I can get a new button left mouse for my satellite, it seems be worn with all usage, its rubbed on her silver medal.

  Thank you

  Hi Richard,

  My SA30 did exactly the same thing. I was not able to find someone who can provide just the button. The normal suggestion is to replace the whole of the touchpad. I guess that I'll just have to put up with it.

  Kind regards

• The mouse is feezeing

  Hello there: here is my problem I have a Toshiba accounting NET nb505 with windows 7 starter. I had two updates in a row after the two updates that my mouse froze twice. I had to restart my computer by pressing the Start button, then press it again to restart. That is the wrong way to do it. I use the mouse for laptop not a separate mouse. I did system restore which seem to fix the problem, but now my computer wants to update again and I'm having the same problem. Any suggestion would be appreciated. Thanks Jenmoon1

  PS. Sorry for the questions of grammar and spelling. Here, very hard for me.

  Hello

  What you have to do is to know what those are updated and if you need.

  Read this piece of information about updates, how to find the problem, and then hide it:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• I have a big problem in my laptop, this damage, next to the mouse, I have a swelling of the inside of the manufacturing unit. And it doesn't work now! What to do!

  I have a big problem in my laptop, this damage, next to the mouse, I have a swelling of the inside of the manufacturing unit. And it doesn't work now! What to do!

  It's probably a battery issue.   Take it in your local store to apple for review.   It is still under warranty?

  By the way, fill out your profile before asking questions, it is impossible to identify which mobile version otherwise.

• Laptop of HP 2000: LEFT of the MOUSE CLICKER

  Hello - I have a laptop HP 2000 and released the left click of the mouse.  The guarantee is exceeded of 2 weeks.  Is there something I can do to fix this?  Click works, but the part of the cover comes off.

  Thanks Bumchs!

• Laptop screen stays black with the mouse cursor only after that comes the HP and Windows logo

  Hi all

  No, my laptop model is HP Pavilion dv6 1337tx. My OS is Windows 7 Home Premium 32 bit. So, today, I shut my laptop down by force by pressing the power button because it did not at this time. Then the next time I turned it the wrong problem started. Whenever I'm on the HP logo sometimes and then the Windows logo comes also. But then the screen stays black and the mouse cursor appears. So, what can be the cause of this problem? I also tried to open with 'safe mode' and 'safe mode with command prompt', but they did not help either.

  Note - I tried the method of discharge after taking off the battery and holding down the power button. He could not help. All LEDS are working properly. I have no extra monitor, so I can't check the display elsewhere. Also, I ran the memory test which shows that everything is fine. Please suggest what I can do now as I can not enter the laptop now. What can be the reason?

  Black screen with blinking cursor:

• Is there a key on my laptop to immobilize the mouse in order to to fix a mobile mouse?

  Original title: itasha

  Is there a key on my laptop to immobilize the mouse in order to to fix a mobile mouse?

  It depends on the laptop. Some laptops have a button somewhere or even have an option in the touchpad settings to automatically disable the touchpad when a USB mouse is connected. You will need to consult your manual for more information.

• Cannot use the mouse with the laptop wireless

  I just bought a laptop. I bought a wireless mouse, but I don't know why it won't let me use it.

  Hello

  1. What is the brand and model of the mouse?

  2. What is the brand and model of the computer?

  3. what operating system you have installed in the computer?

  I suggest you follow the steps described in the methods to solve the problem with the wireless mouse:

  Note: the instructions are applicable to Windows Vista and 7.

  Method 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Bluetooth devices. Bluetooth devices, the steps may be a bit more detail, and you will need to follow the steps listed in the documentation provided with the device. For additional help with Bluetooth devices, see Add a Bluetooth device to your compatible computer deviceand Add a Bluetooth device or other wireless or network device: frequently asked questions.

  Please post back with the result.

• Mouse on laptop is not working properly since the installation of USB mouse.

  Original title: cusier will not work

  Hello asked a mouse on my labtop the arrow move might turn into that something off arrow moves when the mouse is taken, but not when I unplug the mouse

  Hello

  1. for how long are you facing this problem?

  2. don't you make changes before this problem?

  3. what operating system do you use?

  4. What is the brand and the model number of your laptop?

  Method 01:

  I suggest you check in safe mode.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  I also suggest you to reinstall the drivers for the touchpad from the manufacturer.

• How can I disable the Mouse / touchpad - Lenovo, laptop XP pro SP3

  I want to disable the touchpad on a laptop Lenovo G530 with XP pro, SP3. 
  I always use a USB wireless mouse, but while I'm away from striking, the touchpad gets moved or dragged - send me to places that I don't want to be.

  I tried the mouse settings in the properties panel of design, uninstall the drivers of synoptic and software Manager (they have just reinstall at startup).

  I tried how hard (as usual). Please can someone tell me the simple way?  Thank you

  If you have the correct driver installed, Fn + F6 must disable the touchpad.

  Consider that for some reason you do not have the box 'Disable TouchPad when USB pointing device is present.' --> How to disable the Touchpad on IBM/Lenovo ThinkPad Laptops | eHow.com http://www.ehow.com/how_5647892_disable-touchpad-ibm_lenovo-thinkpad-laptop.html#ixzz2EVhswpov

• The left button, scroll, zoom 5 x does not at all for the optical mouse for laptop Microsoft 4000 wireless

  Original title: laptop microsoft 4000 wireless optical mouse (1000 dpi) responding left button, scrolling, 5 x zoom works quite... tried to change the batteries, installed the app again and again and all, but do not get any results.

  the left button, scroll, zoom 5 x works at all... tried to change the batteries, installed the app again and again and all, but do not get any results.

  I noticed that if I press those buttons problematic that the laser is not blink / works as like other work button done.

  (tried mousinfo in program files, on the left the button does not)

  I thought to open for cleaning before I found you I can send help or advice...

  What should I do?

  far I could found the exit of microsoft or repair center

  I liked the 5 X zoom option which miss me most...

  Microsoft wireless notebook optical Mouse-mouse 4000 (1000 dpi)

  very appreciated

  Hello Rabbi,

  1. you remember to make changes to the computer before this problem?

  2 have you tried the mouse on another computer?

  Method 1:

  Alternatively, you can try to uninstall and reinstall the mouse and check if that helps:

  a. Click Start, point to settings and then click Control Panel.

  b. double-click system click on hardware and then click Device Manager.

  c. click on the PLUS SIGN to expand unit

  d. double-click on the mouse driver.

  e. tab driver, click on uninstall

  f. restart the computer and check

  See the following article:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Method 2:

  If the problem persists, test the mouse on another computer in a different environment. If you can replicate the problem in a different environment, you have a defective unit. If this is the case, see the section "More information" for more information on how to contact Microsoft Supplemental Parts for a replacement unit.

  See the following article:

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer HP Compaq laptop and a wireless model 1359 mouse. I need how to do to activate the mouse.

  I need the place where Microsoft go to activate my wireless mouse mouse model 1359.  HP Compaq laptop.

  You are simply wanting to install?

  Install the driver on the cd that comes with it. Just follow the directions

  Install the batteries in the mouse.

  Connect the receiver to your computer.

  You are finished.

• Reverse the mouse buttons on a laptop running Vista Ultimate

  I use Vista Ultimate on a laptop. I want to reverse the mouse buttons.  When I check the control panel to reverse the buttons on the touch pad works like a 'right click '.  How can I reverse the buttons without messing up the keys.

  I use Vista Ultimate on a laptop. I want to reverse the mouse buttons.  When I check the control panel to reverse the buttons on the touch pad works like a 'right click '.  How can I reverse the buttons without messing up the keys.

  I want to assure you that I understand what you want...
  You want with your mouse, click LEFT to open and do a RIGHT click to select?
  If so, right-click on a free space of the desktop > customize > mouse pointers > now here is the tricky part. I use a Dell computer. If you do not have a Dell, I'm not sure that you can follow from here. > you have a tab button? If so, click on it > under button Configuration, select "Switch primary and secondary buttons" > apply/OK
  See screenshot...
  

  t-4-2

• The mouse pad on laptop XP always settings reset after reboot

  Pad parameters (touchpad), I put the mouse on my laptop Dell running XP Home edition. When I reboot all my settings are gone, and I'm back to the default value.

  I found the answer for Vista that says remove startup KHALMNPR, but I don't have anything like that in my startup.

  How can I get these settings to 'paste' beyond a reboot?

  Thank you

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner