Fan Dell XPS PC upstairs with no start-up of the thread

Similar Questions

• XPS 420 Fan upstairs with no start-up of the thread

  Hello world

  I have a Dell XPS 420 and whenever I turn it on, the fan goes really high, and Vista does not start. Sometimes I can turn it on normally, but this is rare, and most of the time the fan will continue at full power as soon as you push the button. I use a moment when the computer works for this, type that Vista has started today. I took the power supply cord and recovered many times and I turned off and turned it back several times too, but usually, it's the most unexpected times when it actually starts. If anyone else has had this problem or does anyone have a solution?

  ----------------------------------------------

  Intel Core 2 Quad Q6600 @ 2.4 GHz

  3.25 GB OF RAM

  Dual 300 GB drives

  NVIDIA GeForce 8600 GTS 256 MB

  Windows Vista Home Premium 32 bit

  1,3,4 lights if they stay on and get each time are not documented HERE the NOTES of the ADMIN: broken link has been removed from this post by Dell >

  in general, this means a motherboard failure. Since you say that you can get this to do several times, then I suggest this.

  Remove all external devices other than keyboard, mouse and monitor. try to start.

  If no change starts from within. remove all ram, cards, disconnect the readers. Press the powerbutton. Not all indications, listen to the beeps, watch the lights, look at the power button. the fact you are saying keep it blue indicates it is not a power supply problem.

  Now, we must reduce it to a component or the motherboard.

  Yes, I'm aware that the diagnostic lights sequence during startup. Its when they stop it is important.

• Laptop Dell XPS 13 L322X: 8 beeps start after replacing the screen

  Hi all

  I have laptop computer Dell XPS 13 L322X (serial number: CC2YVW1).  I use an external monitor because the screen is flickering with vertical lines and ghosts of the colors. I've updated the Bios and the driver video and tried the diagnostic mode (power and the D - key... and) without success.

  I just bought a new replacement compatible screen but the I cannot start using the new form and meeting the 8 beeps are heard. I tried to start with the external monitor and using power on the laptop with the D key, the new screen of the laptop began to switch colors four times and return the sound signal.

  I tried to disconnect the battery and the AC power and maintain the power to drain the left stored energy from capacitors without success.

  Thanks in advance for your help,

  Sala

  In this case, return the set of sieves of replacement - it's probably the cable is bad (but since it is an integral part of the screen, the set should be replaced.

• Audio not working Dell XPS 720 H2C with Windows 7

  Buy a Dell XPS 720 H2C with XP in 2008. Last week made a new installation to upgrade to Windows 7 (made by Micro Center). Have tried to get help through Dell... a lost... cause the last time I buy Dell. The audio card is a card OEM, "Driver Creative Labs Sound Blaster X - Fi XtremeMusic (D). Everything else seems to work very well. Diagnosis of device driver shows that everything is OK.

  Any ideas where to go from here?

  Answer was not helpful, but I appreciate the effort. Found the second site was a bit Advanced for me but looked interesting enough to sue later. Finally chased the problem to map its; called Dell and ordered a replacement. Let's see if that fixes the problem.

• Can't find the Insert key on Dell XPS 10 tablet with keyboard docking station

  Original title: Windows RT Question

  I have a Dell XPS 10 tablet with keyboard docking station.  I can't find an "Insert" button anywhere on it. I use a remote connection which has a login screen that requires a combination of keys Ctrl-Alt-Insert to initiate. Searched high & low online and off. Can't find a way to generate the Insert key race in this environment on this tablet. Someone at - it the answer?

  Hi Kerry,

  You can consult the manual provided by Dell, namely the architecture detailed on the keyboard. Also, you can get in touch with Dell support. Check out the link to post the same query in the Dell forum:

  http://en.community.Dell.com/support-forums/laptop/

  In the meantime, you can use the onscreen keyboard. Check out the link to use a keyboard on the screen under Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/type-with-the-on-screen-keyboard

  Please let us know if you have more queries on Windows.

• Dell XPS 9100 compatible with Nvidia GTX 980/970?

  All the world either of these new cards video 980/970 series installed in a dell xps 9100? Or whether they will work with the 9100, in particular motherboard/bios original card?

  I plan to upgrade my studio xps Dell 9100 (2010 I7 930 12 GB of ram, motherboard Dell 05DN3X Intel X 58 Intel ICH10R) with a new video card in replacement of the Radeon HD 5870. My choice of card is the new Nvidia GTX 970.

  The GTX 970 and 980 GTX are based on the new Maxwell Nvidia cards with high specifications on page and good price. While they are not suitable for the power of the XPS 9100 (two GTX cards consume less energy than the 5870), I don't know if my original xps 9100 motherboard (with a bios updated from July 2014 on the site of dell driver) is compatible with the gtx 970. BIOS office 8700 recent Dell was not compatible/created a problem of black screen, and Dell has released a updated Bios updated for the 8700 in December 2014 that apparently works fine now with the 980/970 series. I wouldn't drop the $350 on a video card that didn't work with my 9100

  I use the Dell 9100 for video editing (Sony Vegas Pro 13, Hitfilm 3, NewBlue and other programs based GL/CL) works more 3d animation with iclone (who prefer Nvidia). I could probably get another year or two out of it with a newer video card... otherwise I'll put all useful to a construction of the self.

  I'd appreciate any comments on it. Maybe Chris from Dell of this forum would know that he shares the fix for dell bios enabled the 980 work with 8700.  Thanks to Chris if he answers or if he can answer my question gtx 970 for me and other 9100 owners.

  Just this moment installed a MSI gtx 970 in my 3 1/2 years, xps 9100. Original motherboard. The only thing I've really updated over the years is the memory.

  Processor Intel Core i7-960 @3. 2 GHz (8 MB L2 Cache)
  16 GB OF RAM, DDR3 PC3-10600, DDR3 PC3-12800
  NVIDIA GeForce (r) GTX 970 4 GB
  Dell XPS 9100 desktop
  Windows 7 Home Premium (64-bit) SP1

  525 Watt POWER supply was more than enough. You must use both the point 6 and point 8 plugs not one or the other. Biggest problem was to find a second source of power. The 6 + 2 plug, but don't think that the other was there. He was and is buried in the middle of a wire harness. A sheet of plain to 6 points. Just enough.

  It works like a charm. Not at all of the start-up problems

• DELL XPS 8700 compatible with the monitor Samsung Syncmaster 2232 office

  HI - can anyone confirm that the DELL XPS 8700 desktop computer is compatible with the monitor Samsung Syncmaster 2232.

  Already, I have the monitor, but need a new processor unit.

  Thank you...

  Hi yydelilah,

  The monitor has VGA and DVI ports.

  By default, XPS 8700 comes with HDMI and display port.  If the system is configured with a discrete card, and this card has DVI/VGA port, you will be able to connect to this monitor.

• Dell XPS One 2710 does not start - should I all reasonable options?

  A few weeks ago, my 18 - month, Dell XPS One 2710 has started to act up.  Still not start correctly.

  Ran the Dell diagnostics on their Web site.  Everything was fine - no detected hardware problem.

  Yesterday, the computer completely stopped working.  It would be start, after a sweep of drive long, finally on the desktop, but can hang after 10 minutes.  I'm on Windows 8 (not 8.1).

  Today, I thought I would do a system restore to a point a month ago.   But today I can not get a startup complete, impossible to get on the desktop.  Therefore, can't do a system restore.  Instead, I see this screen.

  I have the options to continue?   I don't have a recovery disk.

  

  You can install 8.1 on top of what you have by a 16 GB or more usb flash drive as a bootable recovery media.

  If it does not recognize the key to your Bios, you can use a generic key for install but not activate.

  All the pre installed 8.x are 64-bit so make sure you download the correct version.

  XHQ8N-C3MCJ-RQXB6-WCHYG-C9WKB (Windows 8.1 Pro)

  Windows 8.1 334NH-RXG76-64THK-C7CKG-D3VPT (home)

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• Problem with XNET start VI after the creation of sessions

  I have a timed loop sending CAN messages via XNET screws. It works great, but I always lose the very first message. It matters little, I send the first message immediately after you create the XNET session or after a few milliseconds.

  The attached screenshot shows the initialization of my four sessions XNET. Although I am starting before the session with an XNET start VI, there is without success to get the first message.

  It seems that the sessions/CAN (selectable cards and HS CAN) interfaces are initialized only after the first call to write XNET. XNET write seems to imply XNET start (see documentation), but the appellant XNET start manually after the creation of sessions does not help.

  What I'm missing to get the interfaces online and ready before you send anything?

  I was able to solve this problem because they did not actually XNET screw sorry for this post.

• No start-up of the thread when changing the HARD drive

  My hard drive was broken and I had to replace it.
  I have a new hard drive HP (thanks for the quick support & delivery!) and he succeeded.
  Now, I want to start my laptop but it says the following:

  Not found boot device
  Please install an operating system on your hard drive.
  Hard drive (3F0)
  F2 System Diagnostics

  Should not the operating system is already installed on the hard drive?
  What should I do now? I have all the disks to install an operating system...

  More information...
  Model number:
  G6-2274sd

  Product number:
  C5B55EA #ABH

  Oh and he passed control of the short DST I ran, so there is nothing wrong with the hard drive...

  Hello

  Unfortunately, provided by HP HARD drive replacement will not have the operating system installed - you will need one set of recovery disks/usb media.

  If you have not created your own game, you must order a replacement of HP - start by using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  The procedure for using this media to reinstall the operating system on your new drive is detailed in the HP document on the following link.

  http://support.HP.com/us-en/document/c03489643

  Kind regards

  DP - K

• Dell xps 15 l502x with graphics gt540m planted constantly?

  I continue to have this problem where my laptop hangs on the games themselves. There is no stuttering or twist audio and the screen does not black, the game freezes on the last thing I was looking at. I can alt + tab out of it and everything.

  I'm currently using the stock drivers because I sent my laptop to the issue where the computer would crash and would loop the sound, so when I sent it they told me that the problem was because I was using the new drivers, so they are back to pilot actions. I'm almost certain that it is a driver problem, if yes is there a solution to this?

  just to follow up, I got my motherboard replaced on my laptop now it works perfectly well :)

• DELL XPS ONE 27 - no HDMI is not detected with a xbox 360. Help!

  Hi,
  

  I have a problem:
  

  I have my Xbox360 connected to a desktop computer all in one Dell XPS One 27 "with an HDMI cable and when i change the input from Computer to HDMI the monitor does not recognize the Xbox360 and get a screen black and a sign saying "No video on HDMI input detected".
  

  The issue is that my monitor has a resolution of 2560x1440 and I think the maximum resolution that gives Xbox360 is Full HD (1980x1020). But I read that the Xbox360 still have to re-scale the image until it is appropriate (ergo, leave black edges to complete the remaining pixels or, failing enlarge reducing the quality of it), right?.
  

  Anyway, I have also tried to change the resolution of my computer and neither detects Full HD HDMI (and I'm not sure that the Computer resolution remains once I make the switch to HDMI, but in principle, yes).
  

  That's it. I have asked in shops and specialists and everyone tells me that it is possible, but I do not see where it may be bad or failure.....
  

  Thanks in advance. :)
  

  PS: The cable I use is standard HDMI cable and the Xbox is FAT Xbox360.
  

  Hello.

  To resolve this problem, you will need to check that the HDMI cable is ENTIRELY in the HDMI PLUG! Believe it or not! The HDMI on the back of the OIA 2710 is a tight fit, and I thought I was going to break the taking, but he won entirely, and the xbox was on the screen.

  THE SOCKET IS A TIGHT FIT!

  MAKE SURE THAT YOUR HDMI SOCKET IS * ENTIRELY * IN.

  SHOULD THERE HAVE NO HDMI METAL SHOWING!

• Dell XPS 8500 with 1 GB AMD Radeon HD 7570 - how to connect two monitors or?

  Hi, I got my Dell XPS 8500 today with the 1 GB AMD Radeon HD 7570.

  Before buying the office, I read online that the AMD Radeon HD 7570 supports Eyefinity.   Eyefinity is supposed to be capable of supporting 4 monitors using the HD 7570 map by the description here: http://www.amd.com/us/products/desktop/graphics/7000/7570/Pages/radeon-7570.aspx#2

  When you look at the photos of the Dell XPS 8500 online I thought that Eyefinity support was to use a display in addition to the DVI port Port.   Specifically, I thought that a monitor has been supported by DVI monitors while 4 thru two supported using an active connection to the view port using a product like the DisplayPort Accell UltraAV K087B-005 / 3 x multi-monitor DVI - D single-link adapter.

  To my surprise the graphics card came with an HDMI port, not a display port and I believe that HDMI port is a connection from one to the other, and not one of many display connection.   Maybe someone can correct me if I am wrong on this point.   But if I'm not wrong then, this would imply that, at most, the Dell XPS 8500 with the AMD Radeon HD card 7570 can support up to only 2 monitors (one DVI port) and the other HDMI port instead of 4 monitors as described on the above link.

  Others would agree with this statement?

  Note that the Dell XPS 8500 also has a VGA connector on it but I tested it using a monitor on VGA and a monitor on the DVI connection and the computer that reported as an invalid monitor config.   Probably because the VGA and DVI connections are originally the same video display as connect two monitors to display even has no logical sense.

  I have not tested the HDMI port for the second monitor again mainly because I don't have a spare HDMI cable on site at the present time.   I'll probably buy one tomorrow unless I see the comments of my post, specifying that a second monitor can be moved through the HDMI port on the AMD Radeon HD 7570 map...   I'd be surprised if that were the case (1 monitor system would be quite restrictive), but it is difficult to say with certainty, because the VGA and DVI connections at the same time have been marked by the computer as an invalid configuration...

  Any thoughts on the different ways to configure multiple monitors with the XPS 8500 and the 1 GB AMD Radeon HD 7500 is appreciated.

  Thank you.

  Doug

  If the card is not a display port is not an eyefinity card and cannot stand 3 monitors... it will be 2 monitors, no problem... I couldn't find anywhere on the site of Dell, where he says that the card was eyefinity... If you want 3 assumption of monitors you can buy a video card that supports.

• Dell XPS L702X with Nvidia 3D Vision - HDMI problems

  Hello

  I recently bought some Dell XPS L702X 64 with Nvidia 3D Vision (NVIDIA GeForce GT 555 M).

  1. it comes with Windows 7 Home Premium 64 bit and I've upgraded to Windows 7 64 bit Utltimate.
  2. I downloaded the Version of Windows 7 and I've changed the language to English, French.

  Everything works like magic with the exception of the exit HDMI from the PC to the TV (Sharp Aquos HD Ready - 2005 model).

  The TV recognizes the signal between PC and it displays 768 WXGA and immediately the computer laptop & TV Pale white display screens.
  To return the display on the laptop, I need to get out of the PC HDMI cable.
  HDMI works fine on my TV while he receives an input signal of the «TV decoder»

  Waiting for your valuable contributions.

  Kind regards
  Clement

  Please update your NVIDIA graphics driver, the latest version for GT555M is 340.52, hope this will solve your problem

• Hi, I have dell xps with getforce 525M graphics card but my system video memory 0 MB and I am unable to play the game please help me solve the problem

  I have a dell xps 15 laptop with 1 GB graphics card but every time I try to play any game it shows that not enough video memory.

  my system configuration
  6 GB of ram nvidia getforce 525M last pilot, directX11
  Please help me to solve

  Its a laptop, and so the graphics drivers from this manufacturer of laptop, such indicated on the pages of the Nvidia driver update