No start-up of the thread when changing the HARD drive

Similar Questions

• How can I configure my computer to start automatically on the hard drive?

  When I connect to my desktop does not start as it tries to boot from the floppy drive. I have to press F9, then when I see "Select first boot device" scroll down to the hard drive. How can I re set my computer to start automatically on the hard drive?

  How can I re set my computer to start automatically on the hard drive?

  It would depend on the BIOS you have.

  What is the brand, model and model number of your PC?

• Satellite L40 cannot start or recognize the hard drive

  Hi all

  I bought a new Satellite L40 without windows or CD come with him,
  so now when I put the Xp CD, the drive cannot recognized the hard drive or a CD-Rom.

  error message
  Reboot and select boot device prober, or insert boot media in selected boot device and press a KEY.

  I'm not saying any key LOL
  It suppose to be all LOL key to

  Please your help in this matter

  Here another thread about the installation of the SATA drivers!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

  You must include the * Intel Matrix Storage Manager * during the XP installation process.
  As far as I know you have to press the F6 key to include the external USB FDD drive driver.
  Once you have included the SATA driver * DON T format the drive HARD * or create all partitions because that would erase the included driver!

  Another possibility to include the SATA drivers is the use of the * software to nLite.
  By using this software, you could include the SATA driver in the new created XP CD.
  And then you could boot from the new CD.

  > no initialization of SPARCFichiers of hard disk
  > can not load hard drive
  > Insert systemdisk and press a key

  This error message appears because you didn't boot from the bootable CD and/or the operating system has not been installed on the HARD drive and the laptop I wanted to boot from the HARD drive.

• Satellite L505-13U and "quick start" - boot from the hard drive bbs appears

  Hello

  I just bought this laptop
  When I changed the startup on "quick start" method
  now the laptop will not boot
  I have the stack screen see just "bbs-hard disk... boot. »
  I can't enter to the bios f12 f2 does not work
  tried the keyboard and remove the hard disk without result

  Someone help me please

  Hello

  Read this thread, the Andrusito guy explained how he has disabled it:

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=208999#208999

• Could not initialize and I need to recover the data on the hard drive.

  Original title: computer MOM will not start and I need to recover the data on the hard drive.

  It's an old computer and I do not know what version of Windows it was running.  I guess I need a bootdisk of exploitation, but where can I download that?  Or would it be easier to pull and make a secondary drive in my computer that I just replaced?  It works under Windows XP.

  Hello

  If the old system does not start could be the hard drive. Put the hard drive in another computer as a 2nd drive and then access the files. If you use a computer XP, Vista or Windows 7, you should be able to access the files, unless the drive has failed.

  You can save your files by putting the drive in another computer as a 2nd drive (better) or a USB external drive case and then save up to removable media such as CD, DVD or other USB drives. Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data. (This will not work if the hard disk is defective or other issues preventing the system from booting from the CD/DVD drive.)

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite 5100 503: change the HARD drive and start questions

  My hard drive in my Satellite 5100 broke down and I want to change it.

  According to various posts in the forum, it is not possible to start the 5100 from a CD when there is a (new) hard drive in the machine. And the only way to change the boot sequence is via Windows - what does more - there is no other way to change the settings of the BIOS within Windows.

  I looked in the manual - I find no mention after pressing F12 C or any other combination to change the boot sequence (of course I tried yet without result). The only thing I found possible is to press ESC + F1 for BIOS settings default _restore_. And turning the power on by pressing on the left of the space bar gives me the opportunity to Flash a new BIOS.

  Is this really so? Because that would mean I'm stuck. And in this case I will just save the money for the new hard drive and throw my laptop... (and probably by another brand next time - but I sincerely hope that is not so much...)

  Thanks in advance.

  Best regards
  Thomas

  Nice. ;)
  To my knowledge, it was always possible to boot from the CD. Also, after replacing the HARD drive

• Computer lockout windows laptop 7 - can't access bios or change start-up. Even change the hard drive has failed

  HELP! @ I got locked out of my laptop with a password that appears immediately at startup.   nothing works to get around,

  cannot enter bios setup or change your startup.  3 tries, then "System Halt" appears.   I even tried to change the hard drive to reformat

  He and restore again.  No change.  It must be a bios password that I never have.  Any ideas how to get control of my back to laptop?

  Moved to Virus and malicious software Forums.

  Hello

  For problems of BIOS passwords, you will need to contact the manufacturer of your laptop.

  We can not help you because of Microsoft's policy.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Envy 15-j059nr: Envy 15-j059nr would not start Windows after update to win10 now the hard drive is missing

  This system worked before Windows 8.1 it has been upgraded to Windows 10 last year. It's my boyfriends computer and last night it kept getting blue screen dreaded with errors on his hard drive. He kept ignoring. Then, his computer's battery died and when he started upward, he could get a blue screen and act as if it would repair itself and would just start all over again. He was going in a loop. He did not know what he was doing, but searched on the Internet and ended up messing around any more.

  Its installation was 850 GB HD 3 partitions, it was set up as a Raid was one the main C drive, one was the restore disc and the other hides. He changed the disk. He changed a few things in bios too, but I don't know exactly what.

  The problelm I have right now, is that when that I boot without the USB bootable media, I created, I'm stuck at a screen that says there is no startup disk and no installed operating system and press F2 to run Diagnostics. When I run the diagnostics, just fine, no errors.

  When I try to recover, repair, reimage or anything other that to reinstall, it goes back to the screen I mentioned above which does not allow me to do anything about this either, with the exception of past at the command prompt, which is X and not C. I did a dir/w and only seen the windows files are here , but under the users directory, documents and images are empty, so don't know if it's even watch what I think it is.

  When I want to install Windows 10, everything goes smooth and then bam, he wants that pilots. I can't find the drivers for this laptop who don't have the .exe and require installation. This notebook is not a CD/DVD player on it. I don't mind doing a reformat and start all over, if I could recover his pictures on his hard drive. They are his grandfather.

  Help, please!

  Thank you in advance!

  AggieFan378

  You are the very welcome.

  Unfortunately, I woudn't be able to help you with that.

  I'm afraid that the PC is now a useless paperweight because of the BIOS update has failed.  There is usually no recourse other than to replace the motherboard.

  If all goes well, you were able to recover the files before that happened, and if not, get a SATA cable adapter USB and read the hard drive on another PC.

• CD-ROM error at the start after replacing the DVD drive - Qosmio F20-574

  OK, so I have a Toshiba Qosmio F20/574 and I am trying to replace the factory DVD player (TEAC DV-W28E) with a Liteon DS-8A1P (f/w CX12). With or without a DVD Im reader get a CD-ROM error at startup. The only time where what I don't get, is when I start with the factory DVD player.

  Here are the things I've tried...
  -Cleared CMOS memory
  -Remove the bezel to ensure his grip at bottom
  -l' utility EEPROM set the drive to slave.
  -tested the portable player in another
  -uninstalled the factory dvd player via the Device Manager and tried to boot with the new dvd drive

  Here are the things that I found bizarre...
  -in the BIOS (BIOS 1.30 ACP) under IO device, it shows the hard drive and cd, but it is not listed by name, his watch only the IRQ of the primary and secondary IDE controller (integrated drive HARD IDE primary (1F0H/IRQ14), CD-ROM (170 H/IRQ15) secondary IDE). This does not change, even if I start without a DVD player.
  -There is no update available for this laptop BIOS. It is a Toshiba of the Japan and the Ive tried using Qosmio F20 BIOS 1.40 to another region, but this does not work.
  -I can't find a firmware for the Liteon DS-8A1P (CX17) update

  I can't think of anything to try. I really need help! Any ideas?

  I'm afraid that you are using the optical disc drive not compatible and there is nothing you can do. Check it please s user guides document for your model of laptop and you will find a list of all compatible ratings.

• Windows XP start error after access to the hard drive from another computer

  Computer laptop Windows XP went bad because of a bad graphics card.  Bought a new computer at the same time with Windows 7.  Pull the hard drive of the laptop to get the files back.  Had to change the permissions to grant access.  Now when I try to start the windows XP laptop, I get a "windows cannot load the user's profile but you has logged on with the default profile" and then a "windows Explorer has encountered a problem" appears and I can't do anything with it.  When I select 'close' the screen goes gray, then the same message appears.  I have to use the Task Manager to restart.  I did a repair of my XP install disc and also a system restore and still the same problem.  Help!

  Also, running service pack 3 before the repair.  Now on service pack 2 that I cannot access windows update to get updates.

  Computer laptop Windows XP went bad because of a bad graphics card.  Bought a new computer at the same time with Windows 7.  Pull the hard drive of the laptop to get the files back.  Had to change the permissions to grant access.  Now when I try to start the windows XP laptop, I get a "windows cannot load the user's profile but you has logged on with the default profile" and then a "windows Explorer has encountered a problem" appears and I can't do anything with it.  When I select 'close' the screen goes gray, then the same message appears.  I have to use the Task Manager to restart.  I did a repair of my XP install disc and also a system restore and still the same problem.  Help!

  Also, running service pack 3 before the repair.  Now on service pack 2 that I cannot access windows update to get updates.

  You have another administrative user you can connect to the system with and change the owner and permissions on the folder Documents and Settings of the other user with?

• When you try to re - install Windows XP, it does not detect the hard drive.

  Hi all. I tired to do a reinstall of Windows XP today. It seems to take a lot of time, and then I did a very stupid thing. I turned off the laptop that I had to go. Now when I try to start the laptop on the cd, I get as far the screen where I have to press on enter to install Windows XP pro on the system or press R to repair. The problem is that there is now no facilities to choose from in the box below and the system is not recognizing the hard drive. I can't even as much as the screen to format the drive. When I press ENTER to install windows xp, then I get a blue screen telling me that the system shuts down to protect my pc. Is anyone able to tell me what to do to solve this problem please. Thank you very much in advance for your help. Noel

  original title: I did a stupid thing... Windows XP Pro

  Sounds like a hard drive problem then. Your drive is maybe defective. First of all, you can use the partition of diagnostic Dell (F12) for its determination.

  In case there is a SATA problem, press F2 to enter the BIOS and change the setting of hard disk SATA to legacy. (Might as well try this first.)

• XP does not start from the hard drive

  I have an old pc under win xp. It does not drive start hard when it starts. I always have a cd/dvd in master dvd for it to start windows players. Can anyone help?

  herikhi

  Hi herikhi,
   
  Change the start of the base system (Input Output) BIOS setting to boot from the hard drive.
   
  Consult the manual of the manufacturer, to do the same thing.
   

  NOTE: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

• Changed the hard drive and stays of Windows vista is not genuine

  Original title: why do need me a new product key
  My computer stopped working and a new hard drive has been implemented. Now my computer asks for a product key and my computer says that I am using a windows vista that is not authentic. My background goes black and won't keep any substance I put in place.

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  This problem occurs because you changed the hard drive. When a change is made in the hard disk of the windows vista system will ask you to activate.

  To activate Windows Vista by using the automated telephone system, follow these steps:

  a. Click Start, and then click computer.
  b. click System Properties on the toolbar and then click here to activate Windows now in the Windows activation section.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. click Show me other ways to activate.
  d. click on use the automated telephone and then follow the instructions.

  You can also navigate to the link below and try to follow the steps to reactivate the copy of Vista.
  http://support.Microsoft.com/kb/950756

  Reference link:
  What is activation?
  http://Windows.Microsoft.com/en-in/Windows-Vista/what-is-activation

  Activate Windows on this computer
  http://Windows.Microsoft.com/en-in/Windows-Vista/activate-Windows-on-this-computer

  Please respond with the information. I'd be happy to help you further.

• I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor.

  I have an Acer Aspire One Netbook.  (No DVD player).  From the start on the hard drive, I get a black screen with a blinking cursor.  The cursor does not type.  For me, maybe I need to reinstall windows 7 and startup tasks are corrupt.  I have my product key genuine for the computer, but no way to get to windows.  How to restore windows on a netbook that won't start?

  original title: Netbook Windows 7 problem

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  Borrow a 32 bit Genuine Windows 7 friends DVD disc if you know someone who has one.

  Make an image of the DVD, you can use a program like ISO Recorder to do.
  http://alexfeinman.com/

  If you don't have a Windows 7 DVD to borrow, try to upload a picture:

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  You change the content of the. ISO file and delete the ei.cfg file. After having edited burn it to a blank DVD disc or put it on a USB key. Startup, it will reveal all editions of Windows 7, select the Starter edition. More information in the following article on how to change the file ei.cfg

  Utility delete EI.cfg allows you to use a product key
  http://Lifehacker.com/#%215438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-Windows-7-disc

  You can create a bootable USB stick with the following:
  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key (this is the key of Windows 7 Starter, which would be located on the COA sticker at the bottom of your laptop)

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

  Once activation is complete, enjoy yourself, make a backup of your installation of Windows 7 Starter please? You will need to do this an external hard drive, but its worth it. Because if your installation is messed up, all you have to do is to restore from a backup.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Once the backup is complete, you can do an upgrade to Windows 7 Professional by using the product key that you have, if it's a full key, Windows 7 Professional Anytime Upgrade retail or upgrade license key.

  Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key of Windows 7 Professional on demand, click Next and restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained.

  Reactivate the installation, you may also do it by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

• Change the hard drive of my Inspiron 9300

  Hello!

  This is my first post on this forum.

  Since July 2005, I have a Dell Inspiron 9300.

  As it is now out of warranty, I would change the hard drive in it.

  So I have a few questions, I'm looking for answers to if possible.

  I will present my questions in two different parts, the first is on the material, the disc itself and then the software thing.

  (A) material:

  (1) should what equipment I expect? I know it's a hard disk IDE, so I guess I have to get the same kind, in parallel ATA works?

  (2) I read here and there that the BIOS is limited to hard drives 120 GB, because more is not supported by the latter. You know a way to expand this capacity? (Only a medium chest!)

  (3) what kind of drives advise you? (Brand, speed, etc...)

  (4) I read on description hard drive 'IDE ATA 100' or ' IDE ATA 133 "in online shops, you know what it is?

  (B) software:

  (1) I would like to be sure that I will install the same things as when I do "Ctrl + F11", for the utility norton Ghost (want to keep this option!), which reinstall the entire computer with factory settings. I will get this during the installation with the recovery CD? Or you have a way to get this? (I want the same computer I have today, except a different HDD only!)

  (2) do you know how to create a D: partition, so that I have a part for programs and a part for the storage of the files?

  (3) how to install, is it: replace drive HARD; start the computer while starting on the recovery CD, Partition the disk HARD C: and D: (with the D: partitioned within the C: drive, I guess) and complete the installation of windows with the included Dell factory settings?

  I hope that I won't bore you with my questions, and you'll be able to answer. It would be nice, because I'm not a pro from the computer, only an amateur.

  Thank you very much

  Vincent