fan Gpu dv2 - 1044ca stopped working... I think so

Similar Questions

• Satellite L755-11j - cooling fan seems to have stopped working

  Hello

  I have the model Satellite L755-11j and I'm really happy with it, strong, fast and reliable, I have only one problem: my cooling fan seems to have stopped working.

  I don't know if it's a hardware or software (BIOS is set to dynamic switch, and in the power management is set to 'Active') delivers, because I come from Croatia, diagnostic PC is incredibly overpriced here and I can replace the fan on my own.

  I want to just make sure I don't buy new cooling fan and my problem persists. Install speedfan and Toshiba PC health monitor only confirmed what I suspected, my laptop gets hot.

  I bought the external cooling fan to help keep the temperature of my laptop down, but with the coming of the summer that I really want to solve this problem.

  To be honest, it is not easy to help you with this. Is that cooling fan works automatically and there is not a special option where you can control. Only thing you can change is the cooling method option that you can find in the advanced power options > Toshiba power saver.

  Check it please what option is set to on. Of course on this virtual path, it is not easy to tell if the cooling fan is defective or not.
  It works or not? Can you notice hot air flow when you put your hand on the cooling grill placed on the left side of your laptop?

• The GPU CUDA acceleration stops working PP CC 2015.0.1

  Hello

  I encountered a small problem with the GPU CUDA acceleration.  I've been running an EVGA GTX 570 for quite awhile.  I've relied on the GPU acceleration a bit for a smoother workflow, and recently he has virtually stopped working.  I'll drop a few clips in the timeline panel and apply color effects.  Usually, I can play for a few seconds and skip a few different points in the timeline panel, but once more the program monitor's going to be just black.  I get no error message and I can still hear the audio.  First restart will fix the problem temporarily, until it happens again.  I've resorted to just disable GPU acceleration using just the Mercury Playback Engine only, which solves the problem, but it is really too slow to work with.

  This only seems to happen in After Effects at all.  I started having this problem after one of the subsequent updates of 2015.

  I tried to update my graphics drivers, but it did not help.  Any help or ideas would be greatly appreciated.

  Computer: Windows 8.1 Pro 64-bit, Intel Core i7 3930 K, 32 GB RAM, GeForce GTX 570 (pilot 340.52), EVGA ASUS p9X79 Pro, 238 GB SSD

  Here's why, Neil:

  Version of the ability to calculate CUDA.

  You see, Premiere Pro CC 2015 now requires CUDA compute capability version 3.0 or superior for accelerating GPU of MEPS able to work at all. Unfortunately, GTX 570 your system's Fermi architecture more compute capacity is old, including the CUDA version only 2.x (in the case of the GTX 570, version CUDA compute capacity is only 2.0). In other words, the GPU in your PC is now too old to be properly supported in 2015 of CC. The latest version of first Pro CC to support properly such an older GPU was CC, 2014.

• Reference Dell MD3000i - Contoller Module 1 Stopped working, I think that

  I think that I lost my MD3000i Controller Module 1.  I'm not familiar with these devices and I donb't want to waste them.  I don't have spare parts.  Is it possible to see if I can get the Controller Module 1 working again?  The Module is NOT in offline mode.  I ping the outside management NIC of the band, but I can't view the IP information for Port 0 and Port 1 iSCSI network settings.

  Module controller 0 is working right now, but without the controller 1 I lose redundancy.

  Thank you

  PS - I have registered Support information but don't see nowhere here to tie it.

  Sam - I was able to get the module working again yesterday.  I had to put offline, cut the power, unplug the chassis unit and disconnect the NIC after these actions, I have it plugged it all back in and brought online and was able to redistribute the readers.  Everything works well again.  Backup controller order has been placed.

  Thank you!

• My keyboard has stopped working - please help!

  Hello.
  For some reason, the keyboard on my laptop Satellite 1000 series has stopped working (I think someone was able to associate some liquid above...). Device displays Manager ' easy internet keyboard "and"logitech HID-compliant keyboard"(which refers to a USB keyboard I was forced to buy).
  No luck, anyone know what is happening and how I can get my keyboard to work again? Maybe something to do with the reinstallation of the drivers?

  Hi Adam

  If somebody spilled a little liquid to hardware malfunction and I guess that the keyboard is default now. Try to contact the Service partner and pick up some information how the new costs of keyboard. You can also a Google a little bit around and find that keyboard correspond to your model of laptop.

  In my opinion you can exchange only.

• Windows Media Center has stopped working

  I get a message saying windows media center has stopped working, I also have one indicating Manager windows media center has stopped working, I think that there is also a manager of STF Windows as well. It's just so a new computer should have no probs. There is also something strange happens with my internet connection. I have all the bars of signal strength, but keep dropping out. Telstra have been of no help!

  I tried the SCF/scannow but I received a message "windows resource protection cannot perform the requested operation" achieved 63% then stopped.
  It was moved by John of microsoft, but the place where? still no answers.

  Hello Emma Howard.

  Thank you for your message.  Please follow the steps below to see if re-register components of the media centre will help to resolve the problem.
  Click on the 'Start' button > in the search box, type "Command" > right click on command prompt and select "run as Administrator".
  Once the prompt command opened in a high State, type the following shots entered after each line.

  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  Please let us know if it did or did not help to solve the problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• a lot of my 'programs' stopped working, it says change settings, but where?

  a lot of my programs 'stop working' I think that maybe I changed a setting or something, earlier. When I log into windows live hotmail, he says he has stopped working and closes. Now, I have a list of programs, they all said that they have stopped working properly

  What's happening and where, how? Can I fix it? I am a student in full-time in school online, I need this laptop for work. I don't have the money to bring it to someone else to do now
  Please help me
  Kelly

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Please repost your question specific hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

• Photoshop 7.0 has stopped working.

  My employer gave me a computer when they me off in 2009.  Photoshop has been loaded on the machine and has worked well for several years, but a year ago, it stopped working, I think that it cannot download the updates.  I get this message when it tries to download the updates from the start of the program:

  "File could not be downloaded.  http://cgi...tform=0DLLVer=2.8 3.3AOMVer = 2.8.3.3 an unknown internet error has occurred.  21 :-120 " "

  I realize even an older version is better than nothing, but it is an older version of PS.  I am running Windows XP on a Dell desktop computer.

  Well, it seems that you are right!  What happens is that after the closure of boxes, menu choices to start to work, most is ghosts, however, after reading your post I went back in PS again to test your theory.  The update has not be launched, and the menu is not ghost out.  I was able to upload a photo.  I think you're right!  It had to open a second time in a row to find out that it does not work if I just PS to close and restart the program!  I am so grateful for your help!

• Satellite Pro M70 - cooling fan stopped working

  Hello

  I have a laptop M70, I have recently identified as not very hot when in use. I have now identified that the fan has stopped working.

  Any ideas how I can get this fan, so I give it a clean and check that the connected fan isn't loose etc.?

  Thank you

  Are you sure that your cooling module has stopped working 100%?
  Maybe the cooling module is ok but cannot run with maximum performance and can not cool the CPU correctly because of the dust and debris inside the laptop?
  What do you think of this theory?

  I can tell you that I read a lot of stories and gossip on overheating problems and be more honest to these issues could be solved by cleaning fans.

  I clean my cooling fans from time to time with a jet of compressed air.
  These sprays are professional tools and can be purchased in most dealers specialized computers.

  But if the fan has stopped working and then a jet of compressed air will not help you.
  In this case, a technician must check the laptop.

  Maybe the laptop must completely disassemble to remove and replace the defective part.
  This procedure is really tricky and must be performed by a technician for laptop.

  Good luck buddy

• Satellite A110-351 - fan stopped working

  Hi, this is Michael from the Hungary,

  There is 1.5 years, I bought an A110-351, last year I had these problems:
  1.:when, I turn on my A110, he asks for a bios password. So I contacted my local toshiba authorized service center to solve this problem.
  They said that is not covered by the warranty.
  So I came and they charged me about 120 USD to remove this password BIOS-thing.
  And now when I was looking for new drivers, I noticed my problem in this bulletin (Document ID: 98082361):

  ".. The appearance of this problem on any particular computer is unpredictable - it may never happen, but it can happen any time the computer is turned on. If this problem occurs, it will be necessary to send the computer to Toshiba authorized service provider, which will fix the problem free of charge for you. »

  2: after that, I was happy that I can work with my Toshiba, then an another problem cams:
  The fan noise was weird, and after a few days, it is almost stopped working (no significant air ventilation).
  So I contacted the service center again, and the others were still mentioned above... charged me again.

  Guaranteed, Yes... I have the warranty until 2009-05-09. But I don't think that means anything. So I don't think that I would recommend to anyone I know in the future.

  Any response? I made a few mistakes, or what is normal?

  Hello

  You're talking about this document:
  _New BIOS corrects market password incorrect prompt_
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/bulletin.jsp?soID=1863789

  First of all it is a Toshiba page we and your model of laptop is not referenced, so it's really hard to say if your laptop could be affected...

  In addition, the doc also says this:
  + If this problem occurs, it will be necessary to send the computer to Toshiba authorized service provider, which will fix the problem free of charge for you. +

  So you have to pay for it I recommend contact the ASP in your country and clarify this issue.

  In addition if you warranty is still valid, then the question module cooling must be set free warranty covers replacement of defective parts

  Welcome them

• Cool fan has stopped working - laptop HP Pavilion dv7-6c95dx

  The colling fan has stopped working properly. After research, I learned that it is a COMMON problem for this laptop in particular. Of course my warranty just expired 2 months ago... so...

  I need info on this exact model fan, with that I need to replace it, as well as instructions on how to do it. It is a HP design flaw I think personally that you need security regardless, but I know that will never happen... so let me your useful insight in the matter. Thank you very much.

  HP Pavilion dv7-6c95dx laptop

  Here are the specifications of your HP Pavilion dv7-6c95dx Entertainment Notebook computer. Here is the HP Pavilion dv7 Notebook PC - Maintenance and Service of Guide for your computer. According to the specifications and guide, it seems that HP part #666392-001 is the replacement part you need.

  

  Disassembly instructions start on page 41 of the maintenance and Service of Guide.

  Please send BRAVO

• HP Pavilion dv5237cl Notebook intermittently Shuts Down Due to a thermal event, fan stops working

  Basics:

  HP Pavilion dv5237cl

  Windows XP SP3 32 bit

  PCMCIA SATA card

  1 TB WD Scorpio blue HARD drive

  Computer laptop with 200mm fan cooling pad

  Some USB devices

  Latest drivers and BIOS

  Note: This problem also occurs with Windows 8.

  For the last year my HP Pavilion dv5237cl turned off because of the fan does not work.  I have never seen the term "Thermal event" displayed prior to or on restart.  Usually just abruptly, he died.   I also saw a few BSOD that are not very descriptive to pointing to what the cause was and may be not related.  The laptop usually just stops working and goes out, maybe once every couple of days if it is caught in time.  I HAV been using a Defragmenter memory to help as appropriate the BSOD were due to low memory resources.  I am tracking the temperature of the CPU and have noticed that it is high, when the fan is not working.  I saw up to 85 C and I'm not sure but think that the laptop stops at 100 ° C.  The fan is usually always go at least to a low hum.  Usually, on startup, I get a strong burst of activity fan and if this isn't the case I'm clued in to a fan, not to exploit the condition.

  If I take a PIN regularly and carefully stitch it through the opening in the fan and cause rotate the blades of the fan, the fan will usually start working.  It sometimes takes a few tries.  I noticed the fan poll as it is sometimes wobbling and resembling a noise of ball bearing, but I think it is also maybe a hinged fan.  Some hopping may be due to the time that I used the pin code.  Fan usually settled in a low purr and lately with some ball light bering sound, maybe just wobble.  If I'm not there when the fan stops working or do not notice to try to remedy with a PIN, then the laptop stops due to excessive heat.

  Things I've tried or thought of trying:

  -J' I used canned and out air / blow accumulated debri from inside the vacuum cleaner to suck up and cleaned the vents.

  -J' I add the cooler that keeps time less around 5 c.  The laptop temperature was 55 to 62 C this winter.

  -Install the latest drivers and BIOS.

  -Tried to use Windows 8.

  -J' bought a replacement fan but did not want to disassemble the laptop to install it and also not be

  not know if it is really a material fan or a control sensor or other hardware problem or software problem.

  Thanks in advance.  Help to solve this problem would be appreciated.

  I understand that your laptop stops due to overheating.

  Given the behavior and how the fan no longer works and must be "started" once again, this does not sound like a fan failure.  Page 5-60 of this guide details the process of replacing the fan and the heatsink in Notepad.  If this is something you'd rather not do it yourself, you could contact a local PC shop for the fan and the heat sink replaced.

• Sharing printers has stopped working for me. MacBook Air "think" printer is not connected.

  Sharing printers has stopped working for me. I have an Epson Stylus Photo R340 connected by USB to my Mac Mini end of 2012, and until recently, my MacBook Air has been able to print to it. Now, he 'thinks' the printer is not connected. Computers are on WiFi. Both computers have an OS X 10.11.5 now and the latest driver of Epson printer. Printer sharing is enabled in preferences, sharing, and "Share this printer on the network" is checked in the preferences, printers and Scanners. I went through the hoops to remove the printer and add it again on the Mini and the MacBook Air.

  Of course, the Mini prints very well via USB. Someone has an idea (that I have not already tried) how to get the sharing of printers to work again?

  Other sharing services work, such as the file and screen sharing?

• Fan of 7214nr HP DV6 Envy stop working!

  Hello

  I have a HP DV6 Envy 7214-nr. It is a nice laptop. recently the fan stop working. I mean his work at first boot and then its only funtion to speed very very slow and barly... .barly you can hear it working. not like some months ago.

  usually, I heard the noise of the fan when I play games and generally it works charger if I turn on HP CoolSense. Games become very slow after the first 4 minutes and I can't hear the fan working not at all, and I can't smell even fan works when put my hand near the vents. When I restart my laptop I got this error:

  Hi there @shadad,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I looked into the issue that you mentioned in your post on the Forums of HP Support. I understand that your fan does not work on your HP dv6-7214nr Notebook PC ENVY , and you receive an error message at startup upward.

  Please take a look at this document, called System fan (90 b) error message at startup. You will find that the document said to try the following steps when you receive an error stating that "the system has detected that a cooling fan does not work correctly.

  To resolve this error, follow these steps:

• HP Pavilion DV6: at startup BIOS showing CPU fan has stopped working, but I checked the fan is in good condition

  Hello

  I bought my HP Pavilion dv6 laptop 2011 as it starts a is overheating, freezing windows with noisy fan sound etc... but now, on information in BIOS boot indicating that the CPU fan has stopped working so immediately, I checked that I couldn't hear any noise from fan and no symptoms as fan works so I disassembled my laptop and removed CPU cooler fan only. Simply with the help of the battery, I checked the CPU fan it is running perfectly alone. but it does not work with the laptop.

  Please help me and guide what is the cause of this problem and how to solve this problem.

  Gassab

  HI @Kartic

  Welcome to the HP Forums!

  This is a fantastic place to find answers and suggestions!
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  How can I find my model number or product number?

  I understand that since you had the laptop he had an overheating problem with a loud fan noise that causes freeze it.

  Recently, you have received the message that the CPU fan has stopped working and you couldn't hear the rotation of the fan to the top.

  You have removed the fan and checked, but the fan works.  It is possible that the connection was not safe in Notepad.

  Here is a link to an overheating and Auto Shutdown problem troubleshooting.

  Have you checked for an update of the bios of your laptop. You have provided the series of laptop you have, but not the exact model, so I'm not able to check it for you.

  You can run the Wizard to help HPin order to facilitate this process.

  Like a bios update has the potential to cause damage, you can contact HP technical support using this procedure.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Here is a link to the guide to maintenance and Service Guide HP Pavilion dv6000 Notebook PC for your laptop.

  You can replace the thermal paste on the processor. Here is a link to a YouTube video on this process.

  How to apply thermal paste

  Good luck!