Fan sostitutiva Poweredge 1900

Similar Questions

• PowerEdge 1900 and Poweredge 840 and NO hardware RAID SATA HD, FreeNAS with ZFS

  I searched these forums and the web in general a concise my questions answer, but nothing is done.  I just happen to find someone who is using 'old' technology and it retarget as much as you might think (I am a broke student by the way).

  I bought a Poweredge 1900 Server & server Poweredge 840 ebay about last year.  I've been busy and have yet to work with these two units.  I wanted to use the PE 1900 as a file server and then push a backup of these files on the server off site, the PE840.  I intended to buy four 1 TB or four disks SATA 2 to (WD Black or RED WD) for each system, respectively.

  I've been through a few videos on youtube the other day and discovered FreeNAS.  This seems to be a much better solution than the use of Ubuntu Server, but it also made me think about the hardware Raid with these systems.  If FreeNAS uses ZFS (software raid controller), you want to avoid a hardware raid controller.

  My current assumptions, please correct me if I'm wrong on any of the following:

  I think that each of these systems to support drives up to 2 TB?, I think that I can use the SATA drives and not SAS, four discs in each system drives.

  I believe that I can boot from USB flash drive (a quick, which I intend to install FreeNAS on which they recommend)

  I think I can connect readers to the Perc/Raid Controller controller (& just turn 'off' RAID), or simply directly on the motherboard.  (What woud be the advantages/disadvantages of the use of the card or simply by using the Council)

  I intend on working with what I have right now (cheap and available), then once I get this configuration work that I take it out of the sand/lab sandbox, upgrade the processors and ram up my budget will allow and go live with the installation program (if it is still possible)

  From now on, they are sitting in a corner, begging to consume energy, and fans of polute the soundscape with their cries (PE1900 precisely).  I know that I could pursue other options but I already these two units.

  I really want to utilze FreeNAS its serving capacity file and ZFS for its reliability.  Is it possible with this camera?, or should I junk them and move on?

  Thank you for your answer!

  I've done some research more and since FreeNAS is built off of FreeBSD supported hardware is the same.  I couldn't find a list for FreeNAS specifically so I looked to FreeBSD.  I was still confused about the material and decided to go forward with the poweredge 840, for two reaasons, there already 8 GB of ram and it is not as heavy to move on (from 1900). I shoot the raid controller (for simplicity) and I plugged in three 250 GB SATA drives and a 40 GB SSD.  I had to set the bios for the usb key is recognized and also due to adapt to be considered as a hard drive, then had to define the sequence of boot to the usb drive, acting as a hard drive.  Once all that has been said and done, I wrote my FreeNAS image on my USB and booted up.

  It took maybe 10 minutes and I was up and running (once I had configured the hardware and bios), I created a RaidZ (as proposed FreeNAS) and with my three 250 GB drives, it produced 453 GB of usable disk space.  The 40 GB SSD is used as L2ARC (from my cache of understanding), I tried the installer with and without the 40 GB SSD.  The difference was impressive, just opening the photos or streaming video on my laptop Win 8.1 (Dell 17r) is almost flawless, as if the files were stored locally.

  I was impressed by how quick and easy to use FreeNAS, simple and fast network shares can be configured with permissions that works quite simply not in less than 5 minutes.  I don't have Windows Server down, but generally configuration active directory takes a little more effort.

  I am satisfied for the moment and continues to experiment with the Poweredge 840 until I commit to a processor upgrade.  Once I acquire 16 GB memory for my Poweredge 1900 I will perform with her, as it has only 1 GB now, crazy.

  Thank you for your help.

• request intervento Técnico poweredge 1900 Server

  Buongiorno,

  Abbiamo need intervento di UN vs. Técnico by individualization of e riparazione di guasto Server PowerEdge 1900 2P5XL3J

  He server no if starts.

  Restiamo in attesa di una vs cortese risposta.

  Saluti

  buongionro, sto contattando by mail.

• PERC 4/Di in Poweredge 1900?

  Hello

  You can use the PERC 4/Di from a PowerEdge 2600 server in a PowerEdge 1900 or it is not compatible?

  Thank you.

  No, the PERC 4/Di is a built-in controller (RAID logic is on the motherboard) and is activated by the RAID key (otherwise, it's just a SCSI disk controller). The 1900 doesn't have the built-in ability to take a key or manage the RAID. You need a card. Get the PERC 6 / i.

  If you're talking about the PERC 4/DC (which is a card), it can work, but I still wouldn't use it.

• PowerEdge 1900 & WS2012r2

  Gents

  I decided to migrate my old WHS2011 about her inherited PowerEdge 1900.

  I have 10 SATA drives to transfer (sizes 1 to - 4TB). I started by moving the 3 x 2 TB SATA B, C & D Port drives so that they know. SATA is occupied by the SSD.

  Now, everything went sooth (hardware wise) all disks are recognized, to 3 x 2 disks are added to WS2012r2 Essentials Poll.

  I started the migration of data to free the other drives which I hope for you connect to Perc 5 and other PCIe SATA card, but what I've noticed, it's as writing speeds (when moving data on GBit NIC) 33.5 MB/s with occasional spikes 67.4 MB/s.

  I think it's because one of the SATA Ports (B, C or D) is ATA and limited at 33 Mbps. unfortunately I am struggling to find info on this.

  Someone knows the speed of the built-in SATA ports? or how to improve transfer speeds?

  As mentioned, I have some readers go so behalf of all ports.

  Thank you

  Daniel

  You are right. the bottleneck is not caused by SATA.

  I forgot to mention that the pool, I created the WS2012r2E using parity as a measure of redundancy. Apparently, the parity is to blame for low writing speeds - problem applicable only to the Scriptures known. Readings are fine.

  Thanks for responding

• URGENT: su material guasto Poweredge 1900 - request intervento [GRO]

  Dell Poweredge 1900 fuori co

  Service etiquette: 5Wxg74J

  If e SC yesterday he server da solo. ORA non riconosce più I have brain Sarotherodon. The feeling e che mia he sistema vede non più scheda dove sono collegati RAID controller I have brain.

  Piccolo it display sul front yesterday era led colorato ambra e dava error PCI express Server B0 D4 F0 error fatal

  Codice of it leggo nella scheda Controller Raid E2K-UCS-51

  Chiedo con urgenza preventivo by di intervento UN tecnico vs a domicilio per risoluzione del problema. Grazie.

  Salve,

  The sto contattando by mail

  Saluti,

• PowerEdge 1900 w / PERC5 / i or SAS5 / I under compatibility Win 2008

  I have a PowerEdge 1900 (internal SATA only now) that I plan on the deployment of Windows Server 2008 Standard (64 bit) on short time.

  When I bought the camera, not to not order any controller RAID; before installing Win2008, I would add one of the system.  The only options I can find are for the PERC5 / i and the SAS5 / I.

  Does anyone know if or the other of these controllers are supported on Windows Server 2008?  I would like to know before I have shell out money to buy a...

  Matt

  
  

• PowerEdge 1900 perc 5 / I controller battery replacement

  I have a replacement battery message in the Application to manage Open Dell for a Dell PowerEdge 1900 Perc 5 / i controller. If I replace the battery I lose the current RAID configuration? Also all the procedures available for the replacement of the battery?

  Thank you

  Jeff Hicks

  Here is a link to the manual, page 92 will give you the steps to replace the battery: ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-1900_Owner%27s%20Manual_en-us.pdf

  Your RAID configuration is stored on the discs. Turn the power off and replace the battery, then start back. Upon request, accept the configuration of readers and move forward.

  Kind regards

• Memory of PowerEdge 1900

  Hello. I have a Poweredge 1900 server, we have improved the memory of 4 GB to 16 GB.

  • Locations: 8 (4 banks of 2)

  The problem is that when I rebooted the server, he sees more than 4 GB. What Miss me?

  Thanks for any help.

  Yes, the 32 bit is limited to 4 GB.

  https://msdn.Microsoft.com/en-us/library/Windows/desktop/aa366778 (v = vs. 85) .aspx

• POWEREDGE 1900 FATAL B0 D6 F0 ERROR

  SENNA e DA a COUPLE DI GIORNI CHE IL SERVER POWEREDGE (S.O. WINDOWS SERVER 2003), MI DA' QUESTO TIPO DI ERROR. AFTER a PO' CHE if e AVVIATO LO SCREEN BECOMES BLU E MI COMPARE THE written FORM: SYSTEM IS STOPPED, E SUL DISPLAY DEL CASE IT MESSAGE INDICATED IN OGGETTO.

  COULD HELP?

  Buongiorno, the sto contattando by mail.

• PowerEdge 1900 onboard SATA issues

  I try to get the sata integrated to work.

  I go into the bios and put the 4 sata slots to the automobile. Press to save the changes and reboot.
  Then it restarts and I go back into the bios and it's back to OFF.

  I am trying to add a purple WD 1 TB drive and a 40 GB Intel SSD.

  Could update BIOS to 2.7 to work?
  I already wiped out the old OS, so there is currently no OS on the disks.

  DemonMaestro,

  The first thing I would check is if the integrated Sata controller is enabled. If you go into the BIOS - embedded devices - check then under Embedded SATA if it is set to OFF. If so, then go to ATA Mode.

  Table 2-4 on page 38 of this manual will show the selections.

  Let me know how it goes.

• adding larger disks for poweredge 1900

  This server has perc5 and 3 hd for a total of 208123 MB.  We would like to add hard drives, but not sure if we can.  Is it possible to replace the existing 2 and add another without losing any data. or just add a 4th?  We are limited with perc5 according to a specific size of the drive?  Any help or advice would be greatly appreciated

  The maximum size of physical disk that the PERC 5 can take is 2 TB.

  To enlarge your RAID 5, you can add disks to it - for example, you can convert your 3-drive RAID 5 for a 4 - or 5-disk RAID 5 for the extra space.

  If you replace the existing disks with adults, allowing everyone to rebuild, you'll have a VD (virtual disk - table) that is the same size as the original - you cannot develop a RAID like this on PERC.  If you replace a disc each (and all) with a larger, the only thing you will be able to do with the extra space is to create a second VD on disks.  This will be considered by the operating system as a new/entity 'disc' to use for storage.  Keep in mind that the size of your RAID 5, you're probably using 73 GB SAS drives, you can not mix disks SAS and SATA in the same Bay, so if you decide to replace the disks with the biggest, they MUST be SAS, SATA disks not.

  You can also add multiple disks - of any size, SAS or SATA - to your server and configure as a new/VD/array to use for storage.

• PowerEdge 2950 price HDD [MS]

  Buongiorno, siamo di fans a PowerEdge 2950 number di matricola Server. Abbiamo need di acquistare n ° 6 disc HARD Dell Codice Prodotto 59 14 P e vorremmo sapere to sono gia lines delle slitte o be dobbiamo comprarle o. Grazie.

  It kit e provvisto di alloggiamento slitte delle.

  Speaking saluti

  Manual

• Write cache active warnings?

  Just did new Win2K3 std on PowerEdge 1900 with a PERC 5 controller server installation / I integrated controller running 2 HDD in RAID 1. I get warnings in several event logs saying that "based on the software disk write cache" could not be turned off, which suggests that the data corruption is possible. In the policies for the PERC 5 / i SCSI Disk Device, however, it is said that "this device allows not its write cache be changed"- and it restores the 'turn on disk write caching' checked if you uncheck the box.

  I have to change something? Ignore errors?

  
  

• Errors, try to update the free version of ESXi 5.0 to 5.1

  1.) first of all, this is the command and the error I get:

  ~ # esxcli software installer--depot=/vmfs/volumes/DATASTORE1/patches/ESXi510-201210001.zip vib
  [MetadataDownloadError]
  Could not download zip:/vmfs/volumes/DATASTORE1/patches/ESXi510-201210001.zip?index.xml deposit, to jump

  (('zip:/vmfs/volumes/DATASTORE1/patches/ESXi510-201210001.zip?index.xml', '', "erreur fichier index.xml dele de /vmfs/volumes/DATASTORE1/patches/ESXi510-))

  (("201210001.zip: [Errno 2] no such file or directory: ' / vmfs/volumes/DATASTORE1/patches/ESXi510-201210001.zip'"))
  URL = zip:/vmfs/volumes/DATASTORE1/patches/ESXi510-201210001.zip?index.xml
  Please see the log file for more details.

  2.) on the environment and Notes that relate to this issue:
  The VMwareHost is installed on a Dell PowerEdge 1900 with 16 GB of RAM. Access to the host by using the vSphere Client. I used this environment successfully for six

  months. After the update of my workstation to Windows 8 I was more able to view my virtual machines. An error message was displayed on top of the VM console

  says: ' the VMRC console has disconnected... try to reconnect. "
  An online search indicated that I needed to update ESXi 5.0 to 5.1.

  I am running:
  Version 5.0.0 of ESXi build 623860
  vSphere Client Version 5.0.0 build 623373

  (3.) I found many resources who asked how to upgrade the free version of ESXi 5.0 to 5.1

  With a free license or an evaluation, it is not allowed to download "VMware ESXi - 5.1.0 - 799733 - depot.zip.
  However, by going to this site: http://www.vmware.com/patchmgr/download.portal
  I can download build 838463 as described in the paragraph below of this page/site http://www.vladan.fr/esxi-free-how-to-upgrade-to-esxi-5-1/

  "UPDATE: If you want to upgrade to the latest ESXi 5.1 (build 838463), you should see this article: VMware ESXi 5.1, Patch version ESXi510-201210001 and get it."

  file ESXi510 - 201210001.zip, from the VMware download page. »

  This page/site explains how to apply the patch
  http://communities.VMware.com/people/vmroyale/blog/2011/09/15/updating-ESXi-5--single-use-esxcli-how-to

  4.) I connect to the host using PuTTY. Here's the session info:
  

  Using the user name "root".
  Keyboard-interactive authentication.
  Password:
  The time and date of this connection have been sent in the system logs.

  VMware offers support, powerful system administration tools.  Please
  See www.vmware.com/go/sysadmintools for more details.

  ESXi shell can be disabled by an administrative user. See the
  vSphere documentation security for more information.
  ~ #

  5.) I then download this file downloaded on the host at the following address
  /vmfs/volumes/datastore1/patches/ESXi510-201210001.zip

  (6.) to check... I am able to list the contents of the repository with the following command:

  ~ esxcli # sources vib liste--depot=/vmfs/volumes/datastore1/patches/ESXi510-201210001.zip software | more
  Name Version Release Date acceptance level provider status
  -----------------------------  ----------------------------------  ------  ------------  ----------------  ------
  Update SCSI-bnx2i 1.9.1d.v50.1 - 5vmw.510.0.0.799733 VMware 2012-08-02 VMwareCertified
  updated sata-sata-promise 2: 12 - 3vmw.510.0.0.799733 VMware 2012-08-02 VMwareCertified
  updated net-sky2 1: 20 - 2vmw.510.0.0.799733 VMware 2012-08-02 VMwareCertified
  ESX-base 5.1.0 - 0.5.838463 VMware 2012-09-12 VMwareCertified update
  5.1.0 - 0.0.799733 of xserver-ESX VMware 2012 - 08 - 02 new VMwareCertified
  Misc-cnic-register 1, 1 - 1vmw.510.0.0.799733 VMware 2012-08-02 VMwareCertified update
  ...
  ...
  ...

  7.) when I try to run the install command I get the error stated at the top of this post. How do I update my

  If you don't have access to the repository offline package and the method of installation CD interactive is not what you want, you can take a look at for example http://www.virtuallyghetto.com/2012/09/a-pretty-cool-method-of-upgrading-to.html (and the links in the blog post) to see how you can upgrade.

  André